- 07 Oct, 2020 40 commits
-
-
Nikolay Borisov authored
Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Nikolay Borisov authored
Reviewed-by:
-
Nikolay Borisov authored
It's counterintuitive to have a function named btrfs_inode_xxx which takes a generic inode. Also move the function to btrfs_inode.h so that it has access to the definition of struct btrfs_inode. Reviewed-by:
-
Nikolay Borisov authored
Reviewed-by:
-
Nikolay Borisov authored
Reviewed-by:
-
Nikolay Borisov authored
Reviewed-by:
-
Nikolay Borisov authored
Reviewed-by:
-
Josef Bacik authored
I've made this change separate since it requires both of the newly added NESTED flags and I didn't want to slip it into one of those changes. If we do a double split of a node we can end up doing a BTRFS_NESTED_SPLIT on level 0, which throws lockdep off because it appears as a double lock. Since we're maxed out on subclasses, use BTRFS_NESTED_NEW_ROOT if we had to do a double split. This is OK because we won't have to do a double split if we had to insert a new root, and the new root would be at a higher level anyway. Signed-off-by:
-
Josef Bacik authored
The way we add new roots is confusing from a locking perspective for lockdep. We generally have the rule that we lock things in order from highest level to lowest, but in the case of adding a new level to the tree we actually allocate a new block for the root, which makes the locking go in reverse. A similar issue exists for snapshotting, we cow the original root for the root of a new tree, however they're at the same level. Address this by using BTRFS_NESTING_NEW_ROOT for these operations. Signed-off-by:
-
Josef Bacik authored
If we are splitting a leaf/node, we could do something like the following lock(leaf) BTRFS_NESTING_NORMAL lock(left) BTRFS_NESTING_LEFT + BTRFS_NESTING_COW push from leaf -> left reset path to point to left split left allocate new block, lock block BTRFS_NESTING_SPLIT at the new block point we need to have a different nesting level, because we have already used either BTRFS_NESTING_LEFT or BTRFS_NESTING_RIGHT when pushing items from the original leaf into the adjacent leaves. Signed-off-by: -
Josef Bacik authored
For similar reasons as BTRFS_NESTING_COW, we need BTRFS_NESTING_LEFT/RIGHT_COW. The pattern is this lock leaf -> BTRFS_NESTING_NORMAL cow leaf -> BTRFS_NESTING_COW split leaf lock left -> BTRFS_NESTING_LEFT cow left -> BTRFS_NESTING_LEFT_COW We need this in order to indicate to lockdep that these locks are discrete and are being taken in a safe order. Signed-off-by: -
Josef Bacik authored
Our lockdep maps are based on rootid+level, however in some cases we will lock adjacent blocks on the same level, namely in searching forward or in split/balance. Because of this lockdep will complain, so we need a separate subclass to indicate to lockdep that these are different locks. lock leaf -> BTRFS_NESTING_NORMAL cow leaf -> BTRFS_NESTING_COW split leaf lock left -> BTRFS_NESTING_LEFT lock right -> BTRFS_NESTING_RIGHT The above graph illustrates the need for this new nesting subclass. Signed-off-by: -
Josef Bacik authored
When we COW a block we are holding a lock on the original block, and then we lock the new COW block. Because our lockdep maps are based on root + level, this will make lockdep complain. We need a way to indicate a subclass for locking the COW'ed block, so plumb through our btrfs_lock_nesting from btrfs_cow_block down to the btrfs_init_buffer, and then introduce BTRFS_NESTING_COW to be used for cow'ing blocks. The reason I've added all this extra infrastructure is because there will be need of different nesting classes in follow up patches. Signed-off-by:
-
Josef Bacik authored
We will need these when we switch to an rwsem, so plumb in the infrastructure here to use later on. I violate the 80 character limit some here because it'll be cleaned up later. Signed-off-by:
-
Josef Bacik authored
Our current tree locking stuff allows us to recurse with read locks if we're already holding the write lock. This is necessary for the space cache inode, as we could be holding a lock on the root_tree root when we need to cache a block group, and thus need to be able to read down the root_tree to read in the inode cache. We can get away with this in our current locking, but we won't be able to with a rwsem. Handle this by purposefully annotating the places where we require recursion, so that in the future we can maybe come up with a way to avoid the recursion. In the case of the free space inode, this will be superseded by the free space tree. Signed-off-by:
-
Josef Bacik authored
Nested locking with lockdep and everything else refers to lock hierarchy within the same lock map. This is how we indicate the same locks for different objects are ok to take in a specific order, for our use case that would be to take the lock on a leaf and then take a lock on an adjacent leaf. What ->lock_nested _actually_ refers to is if we happen to already be holding the write lock on the extent buffer and we're allowing a read lock to be taken on that extent buffer, which is recursion. Rename this so we don't get confused when we switch to a rwsem and have to start using the _nested helpers. Signed-off-by:
-
Nikolay Borisov authored
Instead of opencoding filemap_write_and_wait simply call syncblockdev as it makes it abundantly clear what's going on and why this is used. No semantics changes. Reviewed-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
-
Nikolay Borisov authored
Following the refactor of btrfs_free_stale_devices in 7bcb8164 ("btrfs: use device_list_mutex when removing stale devices") fs_devices are freed after they have been iterated by the inner list_for_each so the use-after-free fixed by introducing the break in fd649f10 ("btrfs: Fix use-after-free when cleaning up fs_devs with a single stale device") is no longer necessary. Just remove it altogether. No functional changes. Reviewed-by:
-
Nikolay Borisov authored
Invert unlocked to locked and exploit the fact it can only ever be modified if we are adding a new device to a seed filesystem. This allows to simplify the check in error: label. No semantics changes. Reviewed-by:
-
Nikolay Borisov authored
When adding a new device there's a mandatory check to see if a device is being duplicated to the filesystem it's added to. Since this is a read-only operations not necessary to take device_list_mutex and can simply make do with an rcu-readlock. Using just RCU is safe because there won't be another device add delete running in parallel as btrfs_init_new_device is called only from btrfs_ioctl_add_dev. Signed-off-by:
-
Qu Wenruo authored
[BUG] With a crafted image, btrfs can panic at btrfs_del_csums(): kernel BUG at fs/btrfs/ctree.c:3188! invalid opcode: 0000 [#1] SMP PTI CPU: 0 PID: 1156 Comm: btrfs-transacti Not tainted 5.0.0-rc8+ #9 RIP: 0010:btrfs_set_item_key_safe+0x16c/0x180 RSP: 0018:ffff976141257ab8 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff898a6b890930 RCX: 0000000004b70000 RDX: 0000000000000000 RSI: ffff976141257bae RDI: ffff976141257acf RBP: ffff976141257b10 R08: 0000000000001000 R09: ffff9761412579a8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff976141257abe R13: 0000000000000003 R14: ffff898a6a8be578 R15: ffff976141257bae FS: 0000000000000000(0000) GS:ffff898a77a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f779d9cd624 CR3: 000000022b2b4006 CR4: 00000000000206f0 Call Trace: truncate_one_csum+0xac/0xf0 btrfs_del_csums+0x24f/0x3a0 __btrfs_free_extent.isra.72+0x5a7/0xbe0 __btrfs_run_delayed_refs+0x539/0x1120 btrfs_run_delayed_refs+0xdb/0x1b0 btrfs_commit_transaction+0x52/0x950 ? start_transaction+0x94/0x450 transaction_kthread+0x163/0x190 kthread+0x105/0x140 ? btrfs_cleanup_transaction+0x560/0x560 ? kthread_destroy_worker+0x50/0x50 ret_from_fork+0x35/0x40 Modules linked in: ---[ end trace 93bf9db00e6c374e ]--- [CAUSE] This crafted image has a tricky key order corruption: checksum tree key (CSUM_TREE ROOT_ITEM 0) node 29741056 level 1 items 14 free 107 generation 19 owner CSUM_TREE ... key (EXTENT_CSUM EXTENT_CSUM 73785344) block 29757440 gen 19 key (EXTENT_CSUM EXTENT_CSUM 77594624) block 29753344 gen 19 ... leaf 29757440 items 5 free space 150 generation 19 owner CSUM_TREE item 0 key (EXTENT_CSUM EXTENT_CSUM 73785344) itemoff 2323 itemsize 1672 range start 73785344 end 75497472 length 1712128 item 1 key (EXTENT_CSUM EXTENT_CSUM 75497472) itemoff 2319 itemsize 4 range start 75497472 end 75501568 length 4096 item 2 key (EXTENT_CSUM EXTENT_CSUM 75501568) itemoff 579 itemsize 1740 range start 75501568 end 77283328 length 1781760 item 3 key (EXTENT_CSUM EXTENT_CSUM 77283328) itemoff 575 itemsize 4 range start 77283328 end 77287424 length 4096 item 4 key (EXTENT_CSUM EXTENT_CSUM 4120596480) itemoff 275 itemsize 300 <<< range start 4120596480 end 4120903680 length 307200 leaf 29753344 items 3 free space 1936 generation 19 owner CSUM_TREE item 0 key (18446744073457893366 EXTENT_CSUM 77594624) itemoff 2323 itemsize 1672 range start 77594624 end 79306752 length 1712128 ... Note the item 4 key of leaf 29757440, which is obviously too large, and even larger than the first key of the next leaf. However it still follows the key order in that tree block, thus tree checker is unable to detect it at read time, since tree checker can only work inside one leaf, thus such complex corruption can't be detected in advance. [FIX] The next time to detect such problem is at tree block merge time, which is in push_node_left(), balance_node_right(), push_leaf_left() or push_leaf_right(). Now we check if the key order of the right-most key of the left node is larger than the left-most key of the right node. By this we don't need to call the full tree-checker, while still keeping the key order correct as key order in each node is already checked by tree checker thus we only need to check the above two slots. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202833Reviewed-by:Qu Wenruo <wqu@suse.com> Reviewed-by:
-
Qu Wenruo authored
[BUG] With a crafted image, btrfs can panic at insert_inline_extent_backref(): kernel BUG at fs/btrfs/extent-tree.c:1857! invalid opcode: 0000 [#1] SMP PTI CPU: 0 PID: 1117 Comm: btrfs-transacti Not tainted 5.0.0-rc8+ #9 RIP: 0010:insert_inline_extent_backref+0xcc/0xe0 RSP: 0018:ffffac4dc1287be8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000007 RCX: 0000000000000001 RDX: 0000000000001000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffac4dc1287c28 R08: ffffac4dc1287ab8 R09: ffffac4dc1287ac0 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8febef88a540 R14: ffff8febeaa7bc30 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8febf7a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f663ace94c0 CR3: 0000000235698006 CR4: 00000000000206f0 Call Trace: ? _cond_resched+0x1a/0x50 __btrfs_inc_extent_ref.isra.64+0x7e/0x240 ? btrfs_merge_delayed_refs+0xa5/0x330 __btrfs_run_delayed_refs+0x653/0x1120 btrfs_run_delayed_refs+0xdb/0x1b0 btrfs_commit_transaction+0x52/0x950 ? start_transaction+0x94/0x450 transaction_kthread+0x163/0x190 kthread+0x105/0x140 ? btrfs_cleanup_transaction+0x560/0x560 ? kthread_destroy_worker+0x50/0x50 ret_from_fork+0x35/0x40 Modules linked in: ---[ end trace 2ad8b3de903cf825 ]--- [CAUSE] Due to extent tree corruption (still valid by itself, but bad cross ref), we can allocate an extent which is still in extent tree. The offending tree block of that case is from csum tree. The newly allocated tree block is also for csum tree. Then we will try to insert a tree block ref for the existing tree block ref. For a tree extent item, tree block can never be shared directly by the same tree twice. We have such BUG_ON() to prevent such problem, but this is not a proper error handling. [FIX] Replace that BUG_ON() with proper error message and leaf dump for debug build. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202829Reviewed-by:
-
Qu Wenruo authored
__btrfs_free_extent() is doing two things: 1. Reduce the refs number of an extent backref Either it's an inline extent backref (inside EXTENT/METADATA item) or a keyed extent backref (SHARED_* item). We only need to locate that backref line, either reduce the number or remove the backref line completely. 2. Update the refs count in EXTENT/METADATA_ITEM During step 1), we will try to locate the EXTENT/METADATA_ITEM without triggering another btrfs_search_slot() as fast path. Only when we fail to locate that item, we will trigger another btrfs_search_slot() to get that EXTENT/METADATA_ITEM after we updated/deleted the backref line. And we have a lot of strict checks on things like refs_to_drop against extent refs and special case checks for single ref extents. There are 7 BUG_ON()s, although they're doing correct checks, they can be triggered by crafted images. This patch improves the function: - Introduce two examples to show what __btrfs_free_extent() is doing One inline backref case and one keyed case. Should cover most cases. - Kill all BUG_ON()s with proper error message and optional leaf dump - Add comment to show the overall flow Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202819 [ The report triggers one BUG_ON() in __btrfs_free_extent() ] Reviewed-by:
-
Qu Wenruo authored
Although we have start, len check for extent buffer reader/write (e.g. read_extent_buffer()), these checks have limitations: - No overflow check Values like start = 1024 len = -1024 can still pass the basic (start + len) > eb->len check. - Checks are not consistent For read_extent_buffer() we only check (start + len) against eb->len. While for memcmp_extent_buffer() we also check start against eb->len. - Different error reporting mechanism We use WARN() in read_extent_buffer() but BUG() in memcpy_extent_buffer(). - Still modify memory if the request is obviously wrong In read_extent_buffer() even we find (start + len) > eb->len, we still call memset(dst, 0, len), which can easily cause memory access error if start + len overflows. To address above problems, this patch creates a new common function to check such access, check_eb_range(). - Add overflow check This function checks start, start + len against eb->len and overflow check. - Unified checks - Unified error reports Will call WARN() if CONFIG_BTRFS_DEBUG is configured. And also do btrfs_warn() message for non-debug build. - Exit ASAP if check fails No more possible memory corruption. - Add extra comment for @start @len used in those functions as it's sometimes confused with the logical addressing instead of a range inside the eb space Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202817 [ Inspired by above report, the report itself is already addressed ] Reviewed-by:
-
Nikolay Borisov authored
To avoid duplicating 3 lines of code the error detection logic in init_tree_roots is somewhat quirky. It first checks for the presence of any error condition, then checks for the specific condition to perform any specific actions. That's spurious because directly checking for each respective error condition and doing the necessary steps is more obvious. While at it change the -EUCLEAN to -EIO in case the extent buffer is not read correctly, this is in line with other sites which return -EIO when the eb couldn't be read. Additionally it results in smaller code and the code reads more linearly: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-95 (-95) Function old new delta open_ctree 17243 17148 -95 Total: Before=113104, After=113009, chg -0.08% Signed-off-by:
-
Qu Wenruo authored
[BUG] When quota is enabled for TEST_DEV, generic/013 sometimes fails like this: generic/013 14s ... _check_dmesg: something found in dmesg (see xfstests-dev/results//generic/013.dmesg) And with the following metadata leak: BTRFS warning (device dm-3): qgroup 0/1370 has unreleased space, type 2 rsv 49152 ------------[ cut here ]------------ WARNING: CPU: 2 PID: 47912 at fs/btrfs/disk-io.c:4078 close_ctree+0x1dc/0x323 [btrfs] Call Trace: btrfs_put_super+0x15/0x17 [btrfs] generic_shutdown_super+0x72/0x110 kill_anon_super+0x18/0x30 btrfs_kill_super+0x17/0x30 [btrfs] deactivate_locked_super+0x3b/0xa0 deactivate_super+0x40/0x50 cleanup_mnt+0x135/0x190 __cleanup_mnt+0x12/0x20 task_work_run+0x64/0xb0 __prepare_exit_to_usermode+0x1bc/0x1c0 __syscall_return_slowpath+0x47/0x230 do_syscall_64+0x64/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ---[ end trace a6cfd45ba80e4e06 ]--- BTRFS error (device dm-3): qgroup reserved space leaked BTRFS info (device dm-3): disk space caching is enabled BTRFS info (device dm-3): has skinny extents [CAUSE] The qgroup preallocated meta rsv operations of that offending root are: btrfs_delayed_inode_reserve_metadata: rsv_meta_prealloc root=1370 num_bytes=131072 btrfs_delayed_inode_reserve_metadata: rsv_meta_prealloc root=1370 num_bytes=131072 btrfs_subvolume_reserve_metadata: rsv_meta_prealloc root=1370 num_bytes=49152 btrfs_delayed_inode_release_metadata: convert_meta_prealloc root=1370 num_bytes=-131072 btrfs_delayed_inode_release_metadata: convert_meta_prealloc root=1370 num_bytes=-131072 It's pretty obvious that, we reserve qgroup meta rsv in btrfs_subvolume_reserve_metadata(), but doesn't have corresponding release/convert calls in btrfs_subvolume_release_metadata(). This leads to the leakage. [FIX] To fix this bug, we should follow what we're doing in btrfs_delalloc_reserve_metadata(), where we reserve qgroup space, and add it to block_rsv->qgroup_rsv_reserved. And free the qgroup reserved metadata space when releasing the block_rsv. To do this, we need to change the btrfs_subvolume_release_metadata() to accept btrfs_root, and record the qgroup_to_release number, and call btrfs_qgroup_convert_reserved_meta() for it. Fixes: 733e03a0 ("btrfs: qgroup: Split meta rsv type into meta_prealloc and meta_pertrans") CC: stable@vger.kernel.org # 4.19+ Reviewed-by:
-
Qu Wenruo authored
For delayed inode facility, qgroup metadata is reserved for it, and later freed. However we're freeing more bytes than we reserved. In btrfs_delayed_inode_reserve_metadata(): num_bytes = btrfs_calc_metadata_size(fs_info, 1); ... ret = btrfs_qgroup_reserve_meta_prealloc(root, fs_info->nodesize, true); ... if (!ret) { node->bytes_reserved = num_bytes; But in btrfs_delayed_inode_release_metadata(): if (qgroup_free) btrfs_qgroup_free_meta_prealloc(node->root, node->bytes_reserved); else btrfs_qgroup_convert_reserved_meta(node->root, node->bytes_reserved); This means, we're always releasing more qgroup metadata rsv than we have reserved. This won't trigger selftest warning, as btrfs qgroup metadata rsv has extra protection against cases like quota enabled half-way. But we still need to fix this problem any way. This patch will use the same num_bytes for qgroup metadata rsv so we could handle it correctly. Fixes: f218ea6c ("btrfs: delayed-inode: Remove wrong qgroup meta reservation calls") CC: stable@vger.kernel.org # 4.19+ Reviewed-by: -
Josef Bacik authored
The following lockdep splat ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00169-g87212851a027-dirty #929 Not tainted ------------------------------------------------------ fsstress/8739 is trying to acquire lock: ffff88bfd0eb0c90 (&fs_info->reloc_mutex){+.+.}-{3:3}, at: btrfs_record_root_in_trans+0x43/0x70 but task is already holding lock: ffff88bfbd16e538 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x6a/0x4a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #10 (sb_pagefaults){.+.+}-{0:0}: __sb_start_write+0x129/0x210 btrfs_page_mkwrite+0x6a/0x4a0 do_page_mkwrite+0x4d/0xc0 handle_mm_fault+0x103c/0x1730 exc_page_fault+0x340/0x660 asm_exc_page_fault+0x1e/0x30 -> #9 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 perf_read+0x141/0x2c0 vfs_read+0xad/0x1b0 ksys_read+0x5f/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #8 (&cpuctx_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x88/0x150 perf_event_init+0x1db/0x20b start_kernel+0x3ae/0x53c secondary_startup_64+0xa4/0xb0 -> #7 (pmus_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x4f/0x150 cpuhp_invoke_callback+0xb1/0x900 _cpu_up.constprop.26+0x9f/0x130 cpu_up+0x7b/0xc0 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x71 kernel_init_freeable+0x110/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #6 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x39/0xb0 kmem_cache_create_usercopy+0x28/0x230 kmem_cache_create+0x12/0x20 bioset_init+0x15e/0x2b0 init_bio+0xa3/0xaa do_one_initcall+0x5a/0x2e0 kernel_init_freeable+0x1f4/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #5 (bio_slab_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 bioset_init+0xbc/0x2b0 __blk_alloc_queue+0x6f/0x2d0 blk_mq_init_queue_data+0x1b/0x70 loop_add+0x110/0x290 [loop] fq_codel_tcf_block+0x12/0x20 [sch_fq_codel] do_one_initcall+0x5a/0x2e0 do_init_module+0x5a/0x220 load_module+0x2459/0x26e0 __do_sys_finit_module+0xba/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (loop_ctl_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 lo_open+0x18/0x50 [loop] __blkdev_get+0xec/0x570 blkdev_get+0xe8/0x150 do_dentry_open+0x167/0x410 path_openat+0x7c9/0xa80 do_filp_open+0x93/0x100 do_sys_openat2+0x22a/0x2e0 do_sys_open+0x4b/0x80 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&bdev->bd_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 blkdev_put+0x1d/0x120 close_fs_devices.part.31+0x84/0x130 btrfs_close_devices+0x44/0xb0 close_ctree+0x296/0x2b2 generic_shutdown_super+0x69/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_run_dev_stats+0x49/0x480 commit_cowonly_roots+0xb5/0x2a0 btrfs_commit_transaction+0x516/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_commit_transaction+0x4bb/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&fs_info->reloc_mutex){+.+.}-{3:3}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 __mutex_lock+0x9f/0x930 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 file_update_time+0xc8/0x110 btrfs_page_mkwrite+0x10c/0x4a0 do_page_mkwrite+0x4d/0xc0 handle_mm_fault+0x103c/0x1730 exc_page_fault+0x340/0x660 asm_exc_page_fault+0x1e/0x30 other info that might help us debug this: Chain exists of: &fs_info->reloc_mutex --> &mm->mmap_lock#2 --> sb_pagefaults Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sb_pagefaults); lock(&mm->mmap_lock#2); lock(sb_pagefaults); lock(&fs_info->reloc_mutex); *** DEADLOCK *** 3 locks held by fsstress/8739: #0: ffff88bee66eeb68 (&mm->mmap_lock#2){++++}-{3:3}, at: exc_page_fault+0x173/0x660 #1: ffff88bfbd16e538 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x6a/0x4a0 #2: ffff88bfbd16e630 (sb_internal){.+.+}-{0:0}, at: start_transaction+0x3da/0x5d0 stack backtrace: CPU: 17 PID: 8739 Comm: fsstress Kdump: loaded Not tainted 5.8.0-rc7-00169-g87212851a027-dirty #929 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 ? btrfs_get_alloc_profile+0x150/0x210 lock_acquire+0x9e/0x360 ? btrfs_record_root_in_trans+0x43/0x70 __mutex_lock+0x9f/0x930 ? btrfs_record_root_in_trans+0x43/0x70 ? lock_acquire+0x9e/0x360 ? join_transaction+0x5d/0x450 ? find_held_lock+0x2d/0x90 ? btrfs_record_root_in_trans+0x43/0x70 ? join_transaction+0x3d5/0x450 ? btrfs_record_root_in_trans+0x43/0x70 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 file_update_time+0xc8/0x110 btrfs_page_mkwrite+0x10c/0x4a0 ? handle_mm_fault+0x5e/0x1730 do_page_mkwrite+0x4d/0xc0 ? __do_fault+0x32/0x150 handle_mm_fault+0x103c/0x1730 exc_page_fault+0x340/0x660 ? asm_exc_page_fault+0x8/0x30 asm_exc_page_fault+0x1e/0x30 RIP: 0033:0x7faa6c9969c4 Was seen in testing. The fix is similar to that of btrfs: open device without device_list_mutex where we're holding the device_list_mutex and then grab the bd_mutex, which pulls in a bunch of dependencies under the bd_mutex. We only ever call btrfs_close_devices() on mount failure or unmount, so we're save to not have the device_list_mutex here. We're already holding the uuid_mutex which keeps us safe from any external modification of the fs_devices. Signed-off-by: -
Josef Bacik authored
When closing and freeing the source device we could end up doing our final blkdev_put() on the bdev, which will grab the bd_mutex. As such we want to be holding as few locks as possible, so move this call outside of the dev_replace->lock_finishing_cancel_unmount lock. Since we're modifying the fs_devices we need to make sure we're holding the uuid_mutex here, so take that as well. Signed-off-by:
-
Nikolay Borisov authored
btrfs_prepare_sprout is called when the first rw device is added to a seed filesystem. This means the filesystem can't have its alloc_list be non-empty, since seed filesystems are read only. Simply remove the code altogether. Reviewed-by:
-
Nikolay Borisov authored
Without good understanding of how seed devices works it's hard to grok some of what the code in open_seed_devices or btrfs_prepare_sprout does. Add comments hopefully reducing some of the cognitive load. Reviewed-by:
-
Nikolay Borisov authored
While this patch touches a bunch of files the conversion is straighforward. Instead of using the implicit linked list anchored at btrfs_fs_devices::seed the code is switched to using list_for_each_entry. Previous patches in the series already factored out code that processed both main and seed devices so in those cases the factored out functions are called on the main fs_devices and then on every seed dev inside list_for_each_entry. Using list api also allows to simplify deletion from the seed dev list performed in btrfs_rm_device and btrfs_rm_dev_replace_free_srcdev by substituting a while() loop with a simple list_del_init. Reviewed-by:
-
Nikolay Borisov authored
It makes no sense to have sysfs-related routines be responsible for properly initialising the fs_info pointer of struct btrfs_fs_device. Instead this can be streamlined by making it the responsibility of btrfs_init_devices_late to initialize it. That function already initializes fs_info of every individual device in btrfs_fs_devices. As far as clearing it is concerned it makes sense to move it to close_fs_devices. That function is only called when struct btrfs_fs_devices is no longer in use - either for holding seeds or main devices for a mounted filesystem. Reviewed-by:
-
Nikolay Borisov authored
The return value of this function conveys absolutely no information. All callers already check the state of fs_devices->opened to decide how to proceed. So convert the function to returning void. While at it make btrfs_close_devices also return void. Reviewed-by:
-
Nikolay Borisov authored
This prepares the code to switching seeds devices to a proper list. Reviewed-by:
-
Nikolay Borisov authored
This is in preparation for moving fs_devices to proper lists. Reviewed-by:
-
Nikolay Borisov authored
There's no practical reason too use 'err' as a variable to convey errors. In fact it's value is either set explicitly in the beginning of the function or it simply takes the value of 'ret'. Not conforming to the usual pattern of having ret be the only variable used to convey errors makes the code more error prone to bugs. In fact one such bug was introduced by 6bf9e4bd ("btrfs: inode: Verify inode mode toi avoid NULL pointer dereference") by assigning the error value to 'ret' and not 'err'. Let's fix that issue and make the function less tricky by leaving only ret to convey error values. Signed-off-by:
-
Josef Bacik authored
iomap dio will run generic_write_sync() for us if the iocb is DSYNC. This is problematic for us because of 2 reasons: 1. we hold the inode_lock() during this operation, and we take it in generic_write_sync() 2. we hold a read lock on the dio_sem but take the write lock in fsync Since we don't want to rip out this code right now, but reworking the locking is a bit much to do at this point, work around this problem with this masterpiece of a patch. First, we clear DSYNC on the iocb so that the iomap stuff doesn't know that it needs to handle the sync. We save this fact in current->journal_info, because we need to see do special things once we're in iomap_begin, and we have no way to pass private information into iomap_dio_rw(). Next we specify a separate iomap_dio_ops for sync, which implements an ->end_io() callback that gets called when the dio completes. This is important for AIO, because we really do need to run generic_write_sync() if we complete asynchronously. However if we're still in the submitting context when we enter ->end_io() we clear the flag so that the submitter knows they're the ones that needs to run generic_write_sync(). This is meant to be temporary. We need to work out how to eliminate the inode_lock() and the dio_sem in our fsync and use another mechanism to protect these operations. Tested-by:
-
Goldwyn Rodrigues authored
We're using direct io implementation based on buffer heads. This patch switches to the new iomap infrastructure. Switch from __blockdev_direct_IO() to iomap_dio_rw(). Rename btrfs_get_blocks_direct() to btrfs_dio_iomap_begin() and use it as iomap_begin() for iomap direct I/O functions. This function allocates and locks all the blocks required for the I/O. btrfs_submit_direct() is used as the submit_io() hook for direct I/O ops. Since we need direct I/O reads to go through iomap_dio_rw(), we change file_operations.read_iter() to a btrfs_file_read_iter() which calls btrfs_direct_IO() for direct reads and falls back to generic_file_buffered_read() for incomplete reads and buffered reads. We don't need address_space.direct_IO() anymore: set it to noop. Similarly, we don't need flags used in __blockdev_direct_IO(). iomap is capable of direct I/O reads from a hole, so we don't need to return -ENOENT. Btrfs direct I/O is now done under i_rwsem, shared in case of reads and exclusive in case of writes. This guards against simultaneous truncates. Use iomap->iomap_end() to check for failed or incomplete direct I/O: - for writes, call __endio_write_update_ordered() - for reads, unlock extents btrfs_dio_data is now hooked in iomap->private and not current->journal_info. It carries the reservation variable and the amount of data submitted, so we can calculate the amount of data to call __endio_write_update_ordered in case of an error. This patch removes last use of struct buffer_head from btrfs. Reviewed-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by:
-
Qu Wenruo authored
Commit 1c11b63e ("btrfs: replace pending/pinned chunks lists with io tree") introduced btrfs_device::alloc_state extent io tree, but it doesn't initialize the fs_info and owner member. This means the following features are not properly supported: - Fs owner report for insert_state() error Without fs_info initialized, although btrfs_err() won't panic, it won't output which fs is causing the error. - Wrong owner for trace events alloc_state will get the owner as pinned extents. Fix this by assiging proper fs_info and owner for btrfs_device::alloc_state. Fixes: 1c11b63e ("btrfs: replace pending/pinned chunks lists with io tree") Reviewed-by:
-
