Skip to content

L
linux
Switch branch/tag
  1. 19 Apr, 2017 1 commit
  3. 11 Apr, 2017 4 commits
    • Liu Bo's avatar
      Btrfs: fix potential use-after-free for cloned bio · a967efb3
      Liu Bo authored 
      KASAN reports that there is a use-after-free case of bio in btrfs_map_bio.

If we need to submit IOs to several disks at a time, the original bio
would get cloned and mapped to the destination disk, but we really should
use the original bio instead of a cloned bio to do the sanity check
because cloned bios are likely to be freed by its endio.
Reported-by: default avatarDiego <diegocg@gmail.com>
Signed-off-by: default avatarLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: default avatarDavid Sterba <dsterba@suse.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      a967efb3
    • Liu Bo's avatar
      Btrfs: fix segmentation fault when doing dio read · 97bf5a55
      Liu Bo authored 
      Commit 2dabb324 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
introduced this bug during iterating bio pages in dio read's endio hook,
and it could end up with segment fault of the dio reading task.

So the reason is 'if (nr_sectors--)', and it makes the code assume that
there is one more block in the same page, so page offset is increased and
the bio which is created to repair the bad block then has an incorrect
bvec.bv_offset, and a later access of the page content would throw a
segmentation fault.

This also adds ASSERT to check page offset against page size.
Signed-off-by: default avatarLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: default avatarDavid Sterba <dsterba@suse.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      97bf5a55
    • Liu Bo's avatar
      Btrfs: fix invalid dereference in btrfs_retry_endio · 2e949b0a
      Liu Bo authored 
      When doing directIO repair, we have this oops:

[ 1458.532816] general protection fault: 0000 [#1] SMP
...
[ 1458.536291] Workqueue: btrfs-endio-repair btrfs_endio_repair_helper [btrfs]
[ 1458.536893] task: ffff88082a42d100 task.stack: ffffc90002b3c000
[ 1458.537499] RIP: 0010:btrfs_retry_endio+0x7e/0x1a0 [btrfs]
...
[ 1458.543261] Call Trace:
[ 1458.543958]  ? rcu_read_lock_sched_held+0xc4/0xd0
[ 1458.544374]  bio_endio+0xed/0x100
[ 1458.544750]  end_workqueue_fn+0x3c/0x40 [btrfs]
[ 1458.545257]  normal_work_helper+0x9f/0x900 [btrfs]
[ 1458.545762]  btrfs_endio_repair_helper+0x12/0x20 [btrfs]
[ 1458.546224]  process_one_work+0x34d/0xb70
[ 1458.546570]  ? process_one_work+0x29e/0xb70
[ 1458.546938]  worker_thread+0x1cf/0x960
[ 1458.547263]  ? process_one_work+0xb70/0xb70
[ 1458.547624]  kthread+0x17d/0x180
[ 1458.547909]  ? kthread_create_on_node+0x70/0x70
[ 1458.548300]  ret_from_fork+0x31/0x40

It turns out that btrfs_retry_endio is trying to get inode from a directIO
page.

This fixes the problem by using the saved inode pointer, done->inode.
btrfs_retry_endio_nocsum has the same problem, and it's fixed as well.

Also cleanup unused @start (which is too trivial for a separate patch).

Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: default avatarLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: default avatarDavid Sterba <dsterba@suse.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      2e949b0a
    • Adam Borowski's avatar
      btrfs: drop the nossd flag when remounting with -o ssd · 951e7966
      Adam Borowski authored 
      The opposite case was already handled right in the very next switch entry.
And also when turning on nossd, drop ssd_spread.
Reported-by: default avatarHans van Kranenburg <hans.van.kranenburg@mendix.com>
Signed-off-by: default avatarAdam Borowski <kilobyte@angband.pl>
Reviewed-by: default avatarDavid Sterba <dsterba@suse.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      951e7966
  5. 29 Mar, 2017 4 commits
    • Chris Mason's avatar
      Merge branch 'for-chris-4.11-rc5' of... · 41a75a6e
      Chris Mason authored 
      Merge branch 'for-chris-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.11
      41a75a6e
    • Dan Carpenter's avatar
      Btrfs: fix an integer overflow check · 457ae726
      Dan Carpenter authored 
      This isn't super serious because you need CAP_ADMIN to run this code.

I added this integer overflow check last year but apparently I am
rubbish at writing integer overflow checks...  There are two issues.
First, access_ok() works on unsigned long type and not u64 so on 32 bit
systems the access_ok() could be checking a truncated size.  The other
issue is that we should be using a stricter limit so we don't overflow
the kzalloc() setting ctx->clone_roots later in the function after the
access_ok():

	alloc_size = sizeof(struct clone_root) * (arg->clone_sources_count + 1);
	sctx->clone_roots = kzalloc(alloc_size, GFP_KERNEL | __GFP_NOWARN);

Fixes: f5ecec3c ("btrfs: send: silence an integer overflow warning")
Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: default avatarDavid Sterba <dsterba@suse.com>
[ added comment ]
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      457ae726
    • Goldwyn Rodrigues's avatar
      btrfs: Change qgroup_meta_rsv to 64bit · ce0dcee6
      Goldwyn Rodrigues authored 
      Using an int value is causing qg->reserved to become negative and
exclusive -EDQUOT to be reached prematurely.

This affects exclusive qgroups only.

TEST CASE:

DEVICE=/dev/vdb
MOUNTPOINT=/mnt
SUBVOL=$MOUNTPOINT/tmp

umount $SUBVOL
umount $MOUNTPOINT

mkfs.btrfs -f $DEVICE
mount /dev/vdb $MOUNTPOINT
btrfs quota enable $MOUNTPOINT
btrfs subvol create $SUBVOL
umount $MOUNTPOINT
mount /dev/vdb $MOUNTPOINT
mount -o subvol=tmp $DEVICE $SUBVOL
btrfs qgroup limit -e 3G $SUBVOL

btrfs quota rescan /mnt -w

for i in `seq 1 44000`; do
  dd if=/dev/zero of=/mnt/tmp/test_$i bs=10k count=1
  if [[ $? > 0 ]]; then
     btrfs qgroup show -pcref $SUBVOL
     exit 1
  fi
done
Signed-off-by: default avatarGoldwyn Rodrigues <rgoldwyn@suse.com>
[ add reproducer to changelog ]
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      ce0dcee6
    • Liu Bo's avatar
      Btrfs: bring back repair during read · 9d0d1c8b
      Liu Bo authored 
      Commit 20a7db8a ("btrfs: add dummy callback for readpage_io_failed
and drop checks") made a cleanup around readpage_io_failed_hook, and
it was supposed to keep the original sematics, but it also
unexpectedly disabled repair during read for dup, raid1 and raid10.

This fixes the problem by letting data's inode call the generic
readpage_io_failed callback by returning -EAGAIN from its
readpage_io_failed_hook in order to notify end_bio_extent_readpage to
do the rest.  We don't call it directly because the generic one takes
an offset from end_bio_extent_readpage() to calculate the index in the
checksum array and inode's readpage_io_failed_hook doesn't offer that
offset.

Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: default avatarLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: default avatarDavid Sterba <dsterba@suse.com>
[ keep the const function attribute ]
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      9d0d1c8b
  7. 17 Mar, 2017 2 commits
    • Zygo Blaxell's avatar
      btrfs: add missing memset while reading compressed inline extents · e1699d2d
      Zygo Blaxell authored 
      This is a story about 4 distinct (and very old) btrfs bugs.

Commit c8b97818 ("Btrfs: Add zlib compression support") added
three data corruption bugs for inline extents (bugs #1-3).

Commit 93c82d57 ("Btrfs: zero page past end of inline file items")
fixed bug #1:  uncompressed inline extents followed by a hole and more
extents could get non-zero data in the hole as they were read.  The fix
was to add a memset in btrfs_get_extent to zero out the hole.

Commit 166ae5a4 ("btrfs: fix inline compressed read err corruption")
fixed bug #2:  compressed inline extents which contained non-zero bytes
might be replaced with zero bytes in some cases.  This patch removed an
unhelpful memset from uncompress_inline, but the case where memset is
required was missed.

There is also a memset in the decompression code, but this only covers
decompressed data that is shorter than the ram_bytes from the extent
ref record.  This memset doesn't cover the region between the end of the
decompressed data and the end of the page.  It has also moved around a
few times over the years, so there's no single patch to refer to.

This patch fixes bug #3:  compressed inline extents followed by a hole
and more extents could get non-zero data in the hole as they were read
(i.e. bug #3 is the same as bug #1, but s/uncompressed/compressed/).
The fix is the same:  zero out the hole in the compressed case too,
by putting a memset back in uncompress_inline, but this time with
correct parameters.

The last and oldest bug, bug #0, is the cause of the offending inline
extent/hole/extent pattern.  Bug #0 is a subtle and mostly-harmless quirk
of behavior somewhere in the btrfs write code.  In a few special cases,
an inline extent and hole are allowed to persist where they normally
would be combined with later extents in the file.

A fast reproducer for bug #0 is presented below.  A few offending extents
are also created in the wild during large rsync transfers with the -S
flag.  A Linux kernel build (git checkout; make allyesconfig; make -j8)
will produce a handful of offending files as well.  Once an offending
file is created, it can present different content to userspace each
time it is read.

Bug #0 is at least 4 and possibly 8 years old.  I verified every vX.Y
kernel back to v3.5 has this behavior.  There are fossil records of this
bug's effects in commits all the way back to v2.6.32.  I have no reason
to believe bug #0 wasn't present at the beginning of btrfs compression
support in v2.6.29, but I can't easily test kernels that old to be sure.

It is not clear whether bug #0 is worth fixing.  A fix would likely
require injecting extra reads into currently write-only paths, and most
of the exceptional cases caused by bug #0 are already handled now.

Whether we like them or not, bug #0's inline extents followed by holes
are part of the btrfs de-facto disk format now, and we need to be able
to read them without data corruption or an infoleak.  So enough about
bug #0, let's get back to bug #3 (this patch).

An example of on-disk structure leading to data corruption found in
the wild:

        item 61 key (606890 INODE_ITEM 0) itemoff 9662 itemsize 160
                inode generation 50 transid 50 size 47424 nbytes 49141
                block group 0 mode 100644 links 1 uid 0 gid 0
                rdev 0 flags 0x0(none)
        item 62 key (606890 INODE_REF 603050) itemoff 9642 itemsize 20
                inode ref index 3 namelen 10 name: DB_File.so
        item 63 key (606890 EXTENT_DATA 0) itemoff 8280 itemsize 1362
                inline extent data size 1341 ram 4085 compress(zlib)
        item 64 key (606890 EXTENT_DATA 4096) itemoff 8227 itemsize 53
                extent data disk byte 5367308288 nr 20480
                extent data offset 0 nr 45056 ram 45056
                extent compression(zlib)

Different data appears in userspace during each read of the 11 bytes
between 4085 and 4096.  The extent in item 63 is not long enough to
fill the first page of the file, so a memset is required to fill the
space between item 63 (ending at 4085) and item 64 (beginning at 4096)
with zero.

Here is a reproducer from Liu Bo, which demonstrates another method
of creating the same inline extent and hole pattern:

Using 'page_poison=on' kernel command line (or enable
CONFIG_PAGE_POISONING) run the following:

	# touch foo
	# chattr +c foo
	# xfs_io -f -c "pwrite -W 0 1000" foo
	# xfs_io -f -c "falloc 4 8188" foo
	# od -x foo
	# echo 3 >/proc/sys/vm/drop_caches
	# od -x foo

This produce the following on my box:

Correct output:  file contains 1000 data bytes followed
by zeros:

	0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd
	*
	0001740 cdcd cdcd cdcd cdcd 0000 0000 0000 0000
	0001760 0000 0000 0000 0000 0000 0000 0000 0000
	*
	0020000

Actual output:  the data after the first 1000 bytes
will be different each run:

	0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd
	*
	0001740 cdcd cdcd cdcd cdcd 6c63 7400 635f 006d
	0001760 5f74 6f43 7400 435f 0053 5f74 7363 7400
	0002000 435f 0056 5f74 6164 7400 645f 0062 5f74
	(...)
Signed-off-by: default avatarZygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: default avatarLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: default avatarChris Mason <clm@fb.com>
Signed-off-by: default avatarChris Mason <clm@fb.com>
      e1699d2d
    • Liu Bo's avatar
      Btrfs: fix regression in lock_delalloc_pages · 49d4a334
      Liu Bo authored 
      The bug is a regression after commit
(da2c7009 "btrfs: teach __process_pages_contig about PAGE_LOCK operation")
and commit
(76c0021d "Btrfs: use helper to simplify lock/unlock pages").

So if the dirty pages which are under writeback got truncated partially
before we lock the dirty pages, we couldn't find all pages mapping to the
delalloc range, and the bug didn't return an error so it kept going on and
found that the delalloc range got truncated and got to unlock the dirty
pages, and then the ASSERT could caught the error, and showed

-----------------------------------------------------------------------------
assertion failed: page_ops & PAGE_LOCK, file: fs/btrfs/extent_io.c, line: 1716
-----------------------------------------------------------------------------

This fixes the bug by returning the proper -EAGAIN.

Cc: David Sterba <dsterba@suse.com>
Reported-by: default avatarDave Jones <davej@codemonkey.org.uk>
Signed-off-by: default avatarLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      49d4a334
  9. 07 Mar, 2017 1 commit
  11. 28 Feb, 2017 28 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7