I noticed a minor goof, basically an open issue coming home to
roost.  For the root hub, usb_device->devpath was "/" so it
caused problems using devpath when constructing names for
interfaces.  Driverfs doesn't reject it, but of course the
resulting directory names can't be used...

This patch (untested, but compiles) should make devpath in that
case be "0" ... which can't collide with any path through hub
ports (first port == "1") so it's possible to use driverfs
paths again.

Patch based off of 2.4 patch from Juan Quintela <quintela@mandrakesoft.com>

While doing some cleanups of duplication #include entries,
I found what looks like a minor bug.

The keyspan driver does #include <linux/usb.h> twice. Not
normally a problem, because of the idempotent constructions.

But in this case the behaviour of the dbg() module depends on
the value of DEBUG. Keyspan tries to handle this, but the
first #include is before the definition, and the second one
has no effect. Patch attached.

I don't have the hardware to test, but it sure looks wrong now.

Buggy error handling fixed. Retry the "kickstart" packet much harder -
this greatly reduces instances of connection failures.

  Here's a patch for additional designated initializer changes
  in usb/media/se401.c. Patch is against 2.5.27.

  Here's a patch for additional designated initializer conversion
  in usr/input/aiptek.c. Patch is against 2.5.27.

Changeset 1.403.142.29 introduces a pretty nasty race into the RPC
code. Once we've decoded the RPC reply, it needs to be protected
against being overwritten by any resends.

The following patch achieves this by ensuring that the request is
removed from the list xprt->recv in xprt_complete_rqst(). This again
ensures that xprt_lookup_rqst() will fail to find that request until
we put it back on the list.

bogus dentry pointer to the VFS layer (which would oops on it
inside the dcache lock).

the d_drop is appropriate.

into home.transmeta.com:/home/torvalds/v2.5/linux

Linus, can we please not have that BUG() in 2.5.30?

One of the flakey things I see with 2.5.29 is that many
devices give trouble enumerating.  uhci still oopses khubd
enumerating pegasus (many control message errors first).
But that's not the only troublesome combo.

This patch fixes a failure that would hang the ohci driver
It's basically avoiding a few less IRQs (most noticable
with ISO), in this case so that a wedged SET_ADDRESS completes.
(Instead of hanging khubd in 'D' state.)  And it also updates
a diagnostic to provide more troubleshooting help for similar
issues in the future.

Linus, please apply. This fixes cpu_possible() on x86.

The following patches to nfs2xdr.c/nfs3xdr.c might be relevant: *entry
points into the page, and so the assignment should be made before we
kunmap().

Also includes a patch that converts references to inode->i_data into
inode->i_mapping.  Not likely to be the source of your hang, but should
still be done for consistency with the rest of the kernel.

One more lookup bug caught. Fix missing unlock_kernel() when doing
readdirplus cached lookups in nfs_lookup().

copy_process() just copies the process, it doesn't actually start it.

This is in preparation for doing a "atomically start process on CPU X"
or other cases where we want to change the state of the process before
we actually start running it.

 - Include first cut by Adam J. Richter on proper lock protection for
   tuning functions.

 - Rename ide_register_subdriver() to ata_register_device() and
   ide_unregister_subdriver() accordingly to ata_unregister_device(),
   since this is reflecting better what those functions are about.

 - Remove tons of "curicum vite" style useless documentation here and
   there.

 - typedef unsigned char byte; is finally gone. Everything using it should
   be just ported to u8 if I missed some place where it still gets used.

 - Next round of parameter parsing cleanups by Gerald Champagne.
   Adjusted a bit to harmonize with  hd.c.

 - Move IDE register bitfields declarations over from hdparm.h to
   ide.h.

 - Declare constants needed by hd.c directly there. Those are standard
   values not subject to change and we prefer a bit of code duplication
   in favour of making the two drivers independant from each other.

 - Move everything not ioctl related away from hdreg.h to ide.h.
   This header is in effect not private to the ATA code and should
   therefore not contain stuff only usefull there.

The CS5530 one seems unneeded looking at the databook.  Try the patch
below instead, which removes the irq lock and uses the proper kernel
functions to enable MWI and master.

This updates the 2.5.x PC Card drivers of the Bluetooth subsystem.

into home.transmeta.com:/home/torvalds/v2.5/linux

using a system call from kernel space. 

This avoids one level of hidden code, and makes what happens
much more explicit (and speeds it up too, fwiw)

This "warning fix" bug report is actually an OOPS bugfix.

locks_unlock_delete is buggy in a couple of different ways (previously
reported by Brian Dixon). Rather than fix it, this patch simply deletes
it and uses the normal posix file locking mechanisms to remove all locks
in locks_remove_posix instead.

Make cpu_relax() on all architectures a gcc barrier to match x86.

into home.transmeta.com:/home/torvalds/v2.5/linux

o Corrected dependencies for parportbook
o Introduced do_cmd, thus adhering to KBUILD_VERBOSE and make -s

do_cmd is a nice shorthand when creating rules that in one line
shall adhere to KBUILD_VERBOSE and make -s.
So far the only user is (will be) the docbook makefile

file locking LSM update

An acct flag was added to do_munmap, true everywhere but in mremap's
move_vma: instead of updating the arch and driver sources, revert that
that change and temporarily mask VM_ACCOUNT around that one do_munmap.

Also, noticed that do_mremap fails needlessly if both shrinking _and_
moving a mapping: update old_len to pass vm area boundaries test.

If we support mmap MAP_NORESERVE, we should support it on shared
anonymous objects: too bad that needs a few changes.  do_mmap_pgoff pass
VM_ACCOUNT (or not) down to shmem_file_setup, flag stored into shmem
info, for use by shmem_delete_inode later.  Also removed a harmless but
pointless call to shmem_truncate.

Update Doc and remove FIXME comment from fork.c now accounting right.

do_mmap_pgoff's (file == NULL) check was incorrect: it caused shared
MAP_ANONYMOUS objects to be counted twice (again in shmem_file_setup),
and again on fork(); whereas the equivalent shared /dev/zero objects
were correctly counted.  Conversely, a private readonly file mapping
was (correctly) not counted, but still not counted when mprotected to
writable: mprotect_fixup had pointless "charged = 0" changes, now it
does vm_enough_memory checking when private is first made writable
(but later we may want to refine behaviour on a noreserve mapping).

Also changed correct (flags & MAP_SHARED) test in do_mmap_pgoff to
equivalent (vm_flags & VM_SHARED) test: because do_mmap_pgoff is
dealing with vm_flags rather than the input flags by that stage.

Remove vm_unacct_vma function: it's only used in one place,
which can do it better by using vm_unacct_memory directly.

do_mmap_pgoff clears MAP_NORESERVE from vm_flags when VM accounts
strictly: but it's not in vm_flags, it's in flags (and tested there).

There is no point in do_mremap clearing MAP_NORESERVE from its flags:
it has already validated that only the MREMAP_ flags can be set,
and it has no use for MAP_NORESERVE in the code that follows anyway.