- 18 Aug, 2016 4 commits
-
-
Chris Wilson authored
After we update one PTE for a page, the caller expects to be able to immediately use that through a GGTT read/write. To comply with the callers expectations we therefore need to flush the chipset buffers before returning. Reported-by:
Matti Hämäläinen <ccr@tnsp.org> Fixes: d6473f56 ("drm/i915: Add support for mapping an object page...") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Tested-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
If userspace is asynchronously streaming into the batch or other execobjects, we may not flush those writes along with a change in cache domain (as there is no change). Therefore those writes may end up in internal chipset buffers and not visible to the GPU upon execution. We must issue a flush command or otherwise we encounter incoherency in the batchbuffers and the GPU executing invalid commands (i.e. hanging) quite regularly. v2: Throw a paranoid wmb() into the general flush so that we remain consistent with before. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90841 Fixes: 1816f923 ("drm/i915: Support creation of unbound wc user...") Signed-off-by:
-
Matt Roper authored
It's possible to have a non-zero plane mask and still wind up with a total data rate of zero. There are two cases where this can happen: * planes are active (from the KMS point of view), but are all fully clipped (positioned offscreen) * the only active plane on a CRTC is the cursor (which is handled independently and not counted into the general data rate computations These are both valid display setups (although unusual), so we need to drop the WARN(). Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Testcase: kms_universal_planes.cursor-only-pipe-* Signed-off-by:
-
Matt Roper authored
intel_state->active_crtcs is usually only initialized when doing a modeset. During our first atomic commit after boot, we're effectively faking a modeset to sanitize the DDB/wm setup, so ensure that this field gets initialized before use. v2: - Don't clobber active_crtcs if our first commit really is a modeset (Maarten) - Grab connection_mutex when faking a modeset during sanitization (Maarten) Reported-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
- 17 Aug, 2016 6 commits
-
-
Chris Wilson authored
Brief parameter text to describe @engines. Signed-off-by:
-
Chris Wilson authored
In commit 247177dd ("drm/i915: Always set the vma->pages"), as it title implies, we always set vma->pages for bound objects. Even before that, we would set vma->ggtt_view.pages, for globally bound objects. This was forgotten for the fixup inside the preallocated stolen objects, which has to recreate a global GTT binding outside of the usual VMA insertion path Fixes: 247177dd ("drm/i915: Always set the vma->pages") Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
Local function with forgotten static declaration. Fixes: 19625e85 ("drm/i915: Enable polling when we don't have hpd") Signed-off-by:
-
Chris Wilson authored
Silence sparse who warns that the global variable is not declared static. Fixes: 0b1de5d5 ("drm/i915: Use SSE4.1 movntdqa to ...") Signed-off-by:
-
Tvrtko Ursulin authored
Build the legacy semaphore initialisation array using the engine hardware ids instead of driver internal ones. This makes the static array size dependent only on the number of gen6 semaphore engines. Also makes the per-engine semaphore wait and signal tables hardware id indexed saving some more space. v2: Refactor I915_GEN6_NUM_ENGINES to GEN6_SEMAPHORE_LAST. (Chris Wilson) v3: More polish. (Chris Wilson) Signed-off-by:
-
Tvrtko Ursulin authored
Put the engine hardware id in the common header so they are not only associated with the GuC since they are needed for the legacy semaphores implementation. Signed-off-by:
-
- 16 Aug, 2016 2 commits
-
-
Chris Wilson authored
Just make the logic simple enough for even GCC to understand (and foolproof against random changes): drivers/gpu/drm/i915/intel_runtime_pm.c: warning: 'cmn_a_well' may be used uninitialized in this function [-Wuninitialized]: => 871:23 Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Imre Deak <imre.deak@intel.com>
-
Chris Wilson authored
Daniel Vetter proposed a new challenge to the serialisation inside the busy-ioctl that exposed a flaw that could result in us reporting the wrong engine as being busy. If the request is reallocated as we test its busyness and then reassigned to this object by another thread, we would not notice that the test itself was incorrect. We are faced with a choice of using __i915_gem_active_get_request_rcu() to first acquire a reference to the request preventing the race, or to acknowledge the race and accept the limitations upon the accuracy of the busy flags. Note that we guarantee that we never falsely report the object as idle (providing userspace itself doesn't race), and so the most important use of the busy-ioctl and its guarantees are fulfilled. Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471337440-16777-1-git-send-email-chris@chris-wilson.co.uk
-
- 15 Aug, 2016 28 commits
-
-
Chris Wilson authored
Reported-by: 0day kbuild test robot Fixes: 2bd160a1 ("drm/i915: Reduce i915_gem_objects to only show...") Signed-off-by:
-
Chris Wilson authored
Just another useful register to inspect following a GPU hang. v2: Remove partial decoding of RING_MODE to userspace, be consistent and use GEN > 2 guards around RING_MODE everywhere. Signed-off-by:
-
Chris Wilson authored
There is no other state pertaining to the completed requests in the hang, other than gleamed through the ringbuffer, so including the expired requests in the list of outstanding requests simply adds noise. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-31-git-send-email-chris@chris-wilson.co.uk
-
Chris Wilson authored
It is useful when looking at captured error states to check the recorded BBADDR register (the address of the last batchbuffer instruction loaded) against the expected offset of the batch buffer, and so do a quick check that (a) the capture is true or (b) HEAD hasn't wandered off into the badlands. Signed-off-by:
-
Chris Wilson authored
Since contexts are not currently shared between userspace processes, we have an exact correspondence between context creator and guilty batch submitter. Therefore we can save some per-batch work by inspecting the context->pid upon error instead. Note that we take the context's creator's pid rather than the file's pid in order to better track fd passed over sockets. Signed-off-by:
-
Chris Wilson authored
This little helper only exists to safely discard the upper unused 32bits of the general 64-bit VMA address - as we know that all Global GTT currently are less than 4GiB in size and so that the upper bits must be zero. In many places, we use a u32 for the global GTT offset and we want to document where we are discarding the full VMA offset. Signed-off-by:
-
Chris Wilson authored
Treat the VMA as the primary struct responsible for tracking bindings into the GPU's VM. That is we want to treat the VMA returned after we pin an object into the VM as the cookie we hold and eventually release when unpinning. Doing so eliminates the ambiguity in pinning the object and then searching for the relevant pin later. v2: Joonas' stylistic nitpicks, a fun rebase. Signed-off-by:
-
Chris Wilson authored
In a few places, we repeat a call to clear a pointer to a vma whilst unpinning and releasing a reference to its owner. Refactor those into a common function. Signed-off-by:
-
Chris Wilson authored
Signed-off-by:
-
Chris Wilson authored
Signed-off-by:
-
Chris Wilson authored
Signed-off-by:
-
Chris Wilson authored
Signed-off-by:
-
Chris Wilson authored
Since the intel_engine_init_seqno() is shared by all engine submission backends, move it out of the legacy intel_ringbuffer.c and into the new home for common routines, intel_engine_cs.c Signed-off-by:
-
Chris Wilson authored
Since the scratch allocation and cleanup is shared by all engine submission backends, move it out of the legacy intel_ringbuffer.c and into the new home for common routines, intel_engine_cs.c Signed-off-by:
-
Chris Wilson authored
Signed-off-by:
-
Chris Wilson authored
Use the GGTT VMA as the primary cookie for handing ring objects as the most common action upon the ring is mapping and unmapping which act upon the VMA itself. By restructuring the code to work with the ring VMA, we can shrink the code and remove a few cycles from context pinning. v2: Move the flush of the object back to before the first pin. We use the am-I-bound? query to only have to check the flush on the first bind and so avoid stalling on active rings. Lots of little renames and small hoops. Signed-off-by:
-
Chris Wilson authored
Access through the GTT requires the device to be awake. Ideally i915_vma_pin_iomap() is short-lived and the pinning demarcates the access through the iomap. This is not entirely true, we have a mixture of long lived pins that exceed the wakelock (such as legacy ringbuffers) and short lived pin that do live within the wakelock (such as execlist ringbuffers). Signed-off-by:
-
Chris Wilson authored
We know that the only access to the context object is via the GPU, and the only time when it can be out of the GPU domain is when it is swapped out and unbound. Therefore we only need to clflush the object when binding, thus avoiding any potential stall on touching the domain on an active context. Signed-off-by:
-
Chris Wilson authored
When working with contexts, we most frequently want the GGTT VMA for the context state, first and foremost. Since the object is available via the VMA, we need only then store the VMA. v2: Formatting tweaks to debugfs output, restored some comments removed in the next patch Signed-off-by:
-
Chris Wilson authored
v2: Rename functions to suit their more active role Signed-off-by:
-
Chris Wilson authored
Lookup the GGTT vma once for the object assigned to the fence, and then derive everything from that vma. Signed-off-by:
-
Chris Wilson authored
Since the guc allocates and pins and object into the GGTT for its usage, it is more natural to use that pinned VMA as our resource cookie. v2: Embrace naming tautology v3: Rewrite comments for guc_allocate_vma() Signed-off-by:
-
Chris Wilson authored
The VMA are unreferenced, they belong to the object and live until they are closed. However, if we want to use the VMA as a cookie and use it to keep the object alive, we want to hold onto a reference to the object for the lifetime of the VMA cookie. To facilitate this, add a couple of simple wrappers for managing the reference count on the object owning the VMA. Signed-off-by:
-
Chris Wilson authored
A simple little macro to clear a pointer and return the old value. This is useful for writing value = *ptr; if (!value) return; *ptr = 0; ... free(value); in a slightly more concise form: value = fetch_and_zero(ptr); if (!value) return; ... free(value); with the idea that this establishes a pattern that may be extended for atomic use (using xchg or cmpxchg) i.e. atomic_fetch_and_zero() and similar to llist. Signed-off-by:
-
Chris Wilson authored
In many places, we wish to store the VMA in preference to the object itself and so being able to create the persistent VMA is useful. Signed-off-by:
-
Chris Wilson authored
Previously, we would only set the vma->pages pointer for GGTT entries. However, if we always set it, we can use it to prettify some code that may want to access the backing store associated with the VMA (as assigned to the VMA). Signed-off-by:
-
Chris Wilson authored
It's an outright programming error, so explode if it is ever hit. Signed-off-by:
-
Chris Wilson authored
No longer is knowing how much of the GTT (both mappable aperture and beyond) relevant, and the output clutters the real information - that is how many objects are allocated and bound (and by who) so that we can quickly grasp if there is a leak. v2: Relent, and rename pinned to indicate display only. Since the display objects are semi-static and are of variable size, they are the interesting objects to watch over time for aperture leaking. The other pins are either static (such as the scratch page) or very short lived (such as execbuf) and not part of the precious GGTT. Signed-off-by:
-
