- 29 Aug, 2013 4 commits
-
-
Tomi Valkeinen authored
Regulator handling for DPI and SDI is currently handled in the core.c, using the 'virtual' omapdss platform device. Nowadays we have proper devices for both DPI and SDI, and so we can handle the regulators inside the respective drivers. This patch moves the regulator handling for SDI into sdi.c. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com>
-
Tomi Valkeinen authored
The DPI and SDI platform devices are currently created with the ID of -1. The ID doesn't currently affect anything. However, we have added regulator supply entries for "omapdss_dpi.0" and "omapdss_sdi.0" to the board files, although these supply entries are not yet used. As the ID used for the devices is -1, these regulator supply entries will not work. To fix the issue, assign ID of 0 to the devices. In the future there may be more than one DPI or SDI output, so it makes sense to have a proper ID for them. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com>
-
Tomi Valkeinen authored
The 'channel' field in struct omap_dss_device is no longer used, and can be removed. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com>
-
Tomi Valkeinen authored
OMAPDSS's RFBI encoder driver has not been working for some time. The Nokia N800 is the only board in the mainline that uses RFBI, but it has never been fully functional. The RFBI driver needs to be updated to the new panel model, but as the driver is rather unmaintained and there's no way to test the changes, let's mark the driver as broken. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com>
-
- 28 Aug, 2013 20 commits
-
-
Tomi Valkeinen authored
The old display drivers are no longer used, and will be phased out. So remove them from the omap2plus_defconfig. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Tomi Valkeinen authored
Use new display drivers for AM3517EVM board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Note: the management of LCD GPIOs is unclear. They were originally muxed as inputs, and LCD_PANEL_PWR was labelled as "dvi enable". Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Tomi Valkeinen authored
Use new display drivers for Zoom board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Tomi Valkeinen authored
Use new display drivers for OMAP3 Pandora board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Tomi Valkeinen authored
Use new display drivers for OMAP3EVM board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Tomi Valkeinen authored
Use new display drivers for 3430SDP board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Tomi Valkeinen authored
Use new display drivers for H4 board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Tomi Valkeinen authored
Use new display drivers for cm-t35 board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Tomi Valkeinen authored
Use new display drivers for igep0020 board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Tomi Valkeinen authored
Use new display drivers for OMAP3 Stalker board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Tomi Valkeinen authored
Use new display drivers for LDP board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Tomi Valkeinen authored
Use new display drivers for 2430SDP board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Tomi Valkeinen authored
Use new display drivers for devkit8000 board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Tomi Valkeinen authored
Use the new display drivers for Beagleboard. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Tomi Valkeinen authored
Use the new display drivers for RX51 board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Tony Lindgren <tony@atomide.com>
-
Tomi Valkeinen authored
Use the new display drivers for OMAP3 Overo board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Note that the LCD add-on boards for lcd43 and lcd35 use the same GPIOs for the panels. This means that both panel devices cannot be probed at the same time. DT will handle this correctly, i.e. the DT data will contain the panel device only for the add-on board that is attached. However, for the board file we need a hackish solution: We parse the kernel boot command line, and see whether lcd43 or lcd35 is set as a default display, and add the given one. Or, if neither is given, default to lcd43. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Tomi Valkeinen authored
4430SDP board has an option for a PicoDLP mini-projector. PicoDLP cannot be used at the same time as the second LCD, and there are GPIOs that need to be set/unset when changing the used display. Managing that kind of board specific setup is not simple without board file callbacks. As only some 4430SDP boards actually have the PicoDLP installed, and 4430SDP boards are not that common in the first place, let's remove PicoDLP data from the board file. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Tomi Valkeinen authored
Use the new display drivers for OMAP4 Panda and OMAP4 SDP boards. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Tomi Valkeinen authored
Add some of the most common new display drivers to omap2plus_defconfig to be built as modules. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
Tomi Valkeinen authored
This is no longer needed as omap4 is now booted using device tree. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
-
- 18 Aug, 2013 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup fix from Tejun Heo: "This contains one patch to fix the return value of cpuset's cgroups interface function, which used to always return -ENODEV for the writes on the 'memory_pressure_enabled' file" * 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: fix the return value of cpuset_write_u64()
-
- 17 Aug, 2013 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull jbd2 bug fixes from Ted Ts'o: "Two jbd2 bug fixes, one of which is a regression fix" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: Fix oops in jbd2_journal_file_inode() jbd2: Fix use after free after error in jbd2_journal_dirty_metadata()
-
Guenter Roeck authored
Fix this build error: In file included from fs/exec.c:61:0: arch/s390/include/asm/tlb.h:35:23: error: expected identifier or '(' before 'unsigned' arch/s390/include/asm/tlb.h:36:1: warning: no semicolon at end of struct or union [enabled by default] arch/s390/include/asm/tlb.h: In function 'tlb_gather_mmu': arch/s390/include/asm/tlb.h:57:5: error: 'struct mmu_gather' has no member named 'end' Broken due to commit 2b047252 ("Fix TLB gather virtual address range invalidation corner cases"). Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> [ Oh well. We had build testing for ppc amd um, but no s390 - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Robin Holt authored
I have taken a different job. I am removing myself as maintainer of GRU. Dimitri will continue to maintain the SGI GRU driver, changing the XP/XPC/XPNET maintainer to Cliff Whickman, but leaving behind my personal email address to answer any questions about the design or operation of the XP family of drivers. Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jan Kara authored
Commit 0713ed0c added jbd2_journal_file_inode() call into ext4_block_zero_page_range(). However that function gets called from truncate path and thus inode needn't have jinode attached - that happens in ext4_file_open() but the file needn't be ever open since mount. Calling jbd2_journal_file_inode() without jinode attached results in the oops. We fix the problem by attaching jinode to inode also in ext4_truncate() and ext4_punch_hole() when we are going to zero out partial blocks. Reported-by: majianpeng <majianpeng@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
-
- 16 Aug, 2013 9 commits
-
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "The usual collection of random fixes. Also some further fixes to the last set of security fixes, and some more from Will (which you may already have in a slightly different form)" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7807/1: kexec: validate CPU hotplug support ARM: 7812/1: rwlocks: retry trylock operation if strex fails on free lock ARM: 7811/1: locks: use early clobber in arch_spin_trylock ARM: 7810/1: perf: Fix array out of bounds access in armpmu_map_hw_event() ARM: 7809/1: perf: fix event validation for software group leaders ARM: Fix FIQ code on VIVT CPUs ARM: Fix !kuser helpers case ARM: Fix the world famous typo with is_gate_vma()
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
Pull m68k fixes from Geert Uytterhoeven: "These are two critical fixes, needed by distro kernels, and thus also destined for stable: - The do_div() commit fixes a crash in mounting btrfs volumes, which was a regression from 3.2, - The ARAnyM fix allows to have NatFeat drivers as loadable modules, which is needed for initrds" * 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Truncate base in do_div() m68k/atari: ARAnyM - Fix NatFeat module support
-
git://git.linaro.org/people/mturquette/linuxLinus Torvalds authored
Pull clock controller fixes from Michael Turquette: "Two small fixes for the Zynq clock controller introduced in 3.11-rc1 and another Exynos clock patch which fixes a regression that prevents the video pipeline from functioning on that platform" * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux: clk: exynos4: Add CLK_GET_RATE_NOCACHE flag for the Exynos4x12 ISP clocks clk/zynq/clkc: Add CLK_SET_RATE_PARENT flag to ethernet muxes clk/zynq/clkc: Add dedicated spinlock for the SWDT
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fix from Rafael Wysocki: "The removal of delayed_work_pending() checks from kernel/power/qos.c done in 3.9 introduced a deadlock in pm_qos_work_fn(). Fix from Stephen Boyd" * tag 'pm-3.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / QoS: Fix workqueue deadlock when using pm_qos_update_request_timeout()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "This batch contains a few USB audio fixes, a couple of HD-audio quirks, various small ASoC driver fixes in addition to an ASoC core fix that may lead to memory corruption. Unfortunately slightly more volume than the previous pull request, but all are reasonable regression fixes" * tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add a fixup for Gateway LT27 ASoC: tegra: fix Tegra30 I2S capture parameter setup ALSA: usb-audio: Fix invalid volume resolution for Logitech HD Webcam C525 ALSA: hda - Fix missing mute controls for CX5051 ALSA: usb-audio: fix automatic Roland/Yamaha MIDI detection ALSA: 6fire: make buffers DMA-able (midi) ALSA: 6fire: make buffers DMA-able (pcm) ALSA: hda - Add pinfix for LG LW25 laptop ASoC: cs42l52: Add new TLV for Beep Volume ASoC: cs42l52: Reorder Min/Max and update to SX_TLV for Beep Volume ASoC: dapm: Fix empty list check in dapm_new_mux() ASoC: sgtl5000: fix buggy 'Capture Attenuate Switch' control ASoC: sgtl5000: prevent playback to be muted when terminating concurrent capture
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small USB fixes for 3.11-rc6 that have accumulated. Nothing huge, a EHCI fix that solves a much-reported audio USB problem, some usb-serial driver endian fixes and other minor fixes, a wireless USB oops fix, and two new quirks" * tag 'usb-3.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: keyspan: fix null-deref at disconnect and release USB: mos7720: fix broken control requests usb: add two quirky touchscreen USB: ti_usb_3410_5052: fix big-endian firmware handling USB: adutux: fix big-endian device-type reporting USB: usbtmc: fix big-endian probe of Rigol devices USB: mos7840: fix big-endian probe USB-Serial: Fix error handling of usb_wwan wusbcore: fix kernel panic when disconnecting a wireless USB->serial device USB: EHCI: accept very late isochronous URBs
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix SKB leak in 8139cp, from Dave Jones. 2) Fix use of *_PAGES interfaces with mlx5 firmware, from Moshe Lazar. 3) RCU conversion of macvtap introduced two races, fixes by Eric Dumazet 4) Synchronize statistic flows in bnx2x driver to prevent corruption, from Dmitry Kravkov 5) Undo optimization in IP tunneling, we were using the inner IP header in some cases to inherit the IP ID, but that isn't correct in some circumstances. From Pravin B Shelar 6) Use correct struct size when parsing netlink attributes in rtnl_bridge_getlink(). From Asbjoern Sloth Toennesen 7) Length verifications in tun_get_user() are bogus, from Weiping Pan and Dan Carpenter 8) Fix bad merge resolution during 3.11 networking development in openvswitch, albeit a harmless one which added some unreachable code. From Jesse Gross 9) Wrong size used in flexible array allocation in openvswitch, from Pravin B Shelar 10) Clear out firmware capability flags the be2net driver isn't ready to handle yet, from Sarveshwar Bandi 11) Revert DMA mapping error checking addition to cxgb3 driver, it's buggy. From Alexey Kardashevskiy 12) Fix regression in packet scheduler rate limiting when working with a link layer of ATM. From Jesper Dangaard Brouer 13) Fix several errors in TCP Cubic congestion control, in particular overflow errors in timestamp calculations. From Eric Dumazet and Van Jacobson 14) In ipv6 routing lookups, we need to backtrack if subtree traversal don't result in a match. From Hannes Frederic Sowa 15) ipgre_header() returns incorrect packet offset. Fix from Timo Teräs 16) Get "low latency" out of the new MIB counter names. From Eliezer Tamir 17) State check in ndo_dflt_fdb_del() is inverted, from Sridhar Samudrala 18) Handle TCP Fast Open properly in netfilter conntrack, from Yuchung Cheng 19) Wrong memcpy length in pcan_usb driver, from Stephane Grosjean 20) Fix dealock in TIPC, from Wang Weidong and Ding Tianhong 21) call_rcu() call to destroy SCTP transport is done too early and might result in an oops. From Daniel Borkmann 22) Fix races in genetlink family dumps, from Johannes Berg 23) Flags passed into macvlan by the user need to be validated properly, from Michael S Tsirkin 24) Fix skge build on 32-bit, from Stephen Hemminger 25) Handle malformed TCP headers properly in xt_TCPMSS, from Pablo Neira Ayuso 26) Fix handling of stacked vlans in vlan_dev_real_dev(), from Nikolay Aleksandrov 27) Eliminate MTU calculation overflows in esp{4,6}, from Daniel Borkmann 28) neigh_parms need to be setup before calling the ->ndo_neigh_setup() method. From Veaceslav Falico 29) Kill out-of-bounds prefetch in fib_trie, from Eric Dumazet 30) Don't dereference MLD query message if the length isn't value in the bridge multicast code, from Linus Lüssing 31) Fix VXLAN IGMP join regression due to an inverted check, from Cong Wang * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (70 commits) net/mlx5_core: Support MANAGE_PAGES and QUERY_PAGES firmware command changes tun: signedness bug in tun_get_user() qlcnic: Fix diagnostic interrupt test for 83xx adapters qlcnic: Fix beacon state return status handling qlcnic: Fix set driver version command net: tg3: fix NULL pointer dereference in tg3_io_error_detected and tg3_io_slot_reset net_sched: restore "linklayer atm" handling drivers/net/ethernet/via/via-velocity.c: update napi implementation Revert "cxgb3: Check and handle the dma mapping errors" be2net: Clear any capability flags that driver is not interested in. openvswitch: Reset tunnel key between input and output. openvswitch: Use correct type while allocating flex array. openvswitch: Fix bad merge resolution. tun: compare with 0 instead of total_len rtnetlink: rtnl_bridge_getlink: Call nlmsg_find_attr() with ifinfomsg header ethernet/arc/arc_emac - fix NAPI "work > weight" warning ip_tunnel: Do not use inner ip-header-id for tunnel ip-header-id. bnx2x: prevent crash in shutdown flow with CNIC bnx2x: fix PTE write access error bnx2x: fix memory leak in VF ...
-
Linus Torvalds authored
Ben Tebulin reported: "Since v3.7.2 on two independent machines a very specific Git repository fails in 9/10 cases on git-fsck due to an SHA1/memory failures. This only occurs on a very specific repository and can be reproduced stably on two independent laptops. Git mailing list ran out of ideas and for me this looks like some very exotic kernel issue" and bisected the failure to the backport of commit 53a59fc6 ("mm: limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT"). That commit itself is not actually buggy, but what it does is to make it much more likely to hit the partial TLB invalidation case, since it introduces a new case in tlb_next_batch() that previously only ever happened when running out of memory. The real bug is that the TLB gather virtual memory range setup is subtly buggered. It was introduced in commit 597e1c35 ("mm/mmu_gather: enable tlb flush range in generic mmu_gather"), and the range handling was already fixed at least once in commit e6c495a9 ("mm: fix the TLB range flushed when __tlb_remove_page() runs out of slots"), but that fix was not complete. The problem with the TLB gather virtual address range is that it isn't set up by the initial tlb_gather_mmu() initialization (which didn't get the TLB range information), but it is set up ad-hoc later by the functions that actually flush the TLB. And so any such case that forgot to update the TLB range entries would potentially miss TLB invalidates. Rather than try to figure out exactly which particular ad-hoc range setup was missing (I personally suspect it's the hugetlb case in zap_huge_pmd(), which didn't have the same logic as zap_pte_range() did), this patch just gets rid of the problem at the source: make the TLB range information available to tlb_gather_mmu(), and initialize it when initializing all the other tlb gather fields. This makes the patch larger, but conceptually much simpler. And the end result is much more understandable; even if you want to play games with partial ranges when invalidating the TLB contents in chunks, now the range information is always there, and anybody who doesn't want to bother with it won't introduce subtle bugs. Ben verified that this fixes his problem. Reported-bisected-and-tested-by: Ben Tebulin <tebulin@googlemail.com> Build-testing-by: Stephen Rothwell <sfr@canb.auug.org.au> Build-testing-by: Richard Weinberger <richard.weinberger@gmail.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Takashi Iwai authored
Gateway LT27 needs a fixup for the inverted digital mic. Reported-by: "Nathanael D. Noblet" <nathanael@gnat.ca> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 15 Aug, 2013 1 commit
-
-
Moshe Lazer authored
In the previous QUERY_PAGES command version we used one command to get the required amount of boot, init and post init pages. The new version uses the op_mod field to specify whether the query is for the required amount of boot, init or post init pages. In addition the output field size for the required amount of pages increased from 16 to 32 bits. In MANAGE_PAGES command the input_num_entries and output_num_entries fields sizes changed from 16 to 32 bits and the PAS tables offset changed to 0x10. In the pages request event the num_pages field also changed to 32 bits. In the HCA-capabilities-layout the size and location of max_qp_mcg field has been changed to support 24 bits. This patch isn't compatible with firmware versions < 5; however, it turns out that the first GA firmware we will publish will not support previous versions so this should be OK. Signed-off-by: Moshe Lazer <moshel@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-