- 22 Mar, 2016 40 commits
-
-
Alexandre Bounine authored
Add spinlock protection when handling list of connected peers and ability to handle new peer device addition after the RIONET device was open. Before his update RIONET was sending JOIN requests only when it have been opened, peer devices added later have been missing from this process. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Bounine authored
Change mport object initialization/registration sequence to match reworked version of rio_register_mport() in the core code. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Bounine authored
Add hardware-specific device removal support for Tsi721 PCIe-to-RapidIO bridge. To avoid excessive data type conversions, parameters passed to some internal functions have been revised. Dynamic memory allocations of rio_mport and rio_ops have been replaced to reduce references between data structures. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Bounine authored
Add common mport removal support functions into the RapidIO subsystem core. Changes to the existing mport registration process have been made to avoid race conditions with active subsystem interfaces immediately after mport device registration: part of initialization code from rio_register_mport() have been moved into separate function rio_mport_initialize() to allow to perform mport registration as the final step of setup process. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Bounine authored
Make net allocation/release routines available to all components of RapidIO subsystem by moving code from rio-scan enumerator. Make destination ID allocation method private to existing enumerator because other enumeration methods can use their own algorithm. Setup net device object as a parent of all RapidIO devices residing in it and register net as a child of active mport device. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Bounine authored
This patch moves per-net device list handling from rio-scan to common RapidIO core and adds a matching device deletion routine. This makes device object creation/removal available to other implementations of enumeration/discovery process. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Bounine authored
Add shutdown notification handler which terminates active connections with remote RapidIO nodes. This prevents remote nodes from sending packets to the powered off node and eliminates hardware error events on remote nodes. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Bounine authored
Add device driver specific shutdown notification callback. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Bounine authored
Add bus-specific callback to stop RapidIO devices during a system shutdown. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Bounine authored
Add device-specific implementation of query_mport callback function. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Bounine authored
Add mport query operation to report master port RapidIO capabilities and run time configuration to upper level drivers. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Bounine authored
Fix pending DMA request queue handling to avoid broken ordering during concurrent request submissions. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Bounine authored
Add an option to configure mapping of Inbound Window without RIO-to-PCIe address translation. If a local memory buffer is not properly aligned to meet HW requirements for RapidIO address mapping with address translation, caller can request an inbound window with matching RapidIO address assigned to it. This implementation selects RapidIO base address and size for inbound window that are capable to accommodate the local memory buffer. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Bounine authored
Add check for attempts to request mapping of inbound RapidIO address space that overlaps with existing active mapping windows. Tsi721 device does not support overlapped inbound windows and SRIO address decoding behavior is not defined in such cases. This patch is applicable to kernel versions starting from v3.7. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Bounine authored
Remove use of hardcoded setting for Maximum Read Request Size (MRRS) value and use one set by PCIe bus driver. Using hardcoded value can cause PCIe bus errors on platforms that have tsi721 device on PCIe path that allows only smaller read request sizes. This fix is applicable to kernel versions starting from v3.2. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Aurelien Jacquiot authored
These patches are the result of extensive collaboration within the RapidIO.org Software Task Group between Texas Instruments, Freescale, Prodrive Technologies, Nokia Networks, BAE and IDT. Additional input was received from other members of RapidIO.org. The objective was to create a character mode driver interface which exposes the capabilities of RapidIO devices directly to applications, in a manner that allows the numerous and varied RapidIO implementations to interoperate. The Software Task Group has also developed fabric management, Remote Memory Access, and sockets applications which make use of these interfaces in user space. Intensive testing with these applications prompted the RapidIO subsystem updates provided within this set of patches. This patch (of 29): Replace default Ethernet-specific routine by the custom one to allow setting of larger MTU supported by RapidIO messaging (max RIO packet size is 4096 bytes). Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Aurelien Jacquiot authored
Fix deadlocking during concurrent receive and transmit operations on SMP platforms caused by the use of incorrect lock: on transmit 'tx_lock' spinlock should be used instead of 'lock' which is used for receive operation. This fix is applicable to kernel versions starting from v2.15. Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Eric Biggers authored
Since commit cdfdef75 ("cpumask: only allocate nr_cpumask_bits."), this comment above cpumask_size() is no longer relevant. Signed-off-by: Eric Biggers <ebiggers3@gmail.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jann Horn authored
This commit fixes the following security hole affecting systems where all of the following conditions are fulfilled: - The fs.suid_dumpable sysctl is set to 2. - The kernel.core_pattern sysctl's value starts with "/". (Systems where kernel.core_pattern starts with "|/" are not affected.) - Unprivileged user namespace creation is permitted. (This is true on Linux >=3.8, but some distributions disallow it by default using a distro patch.) Under these conditions, if a program executes under secure exec rules, causing it to run with the SUID_DUMP_ROOT flag, then unshares its user namespace, changes its root directory and crashes, the coredump will be written using fsuid=0 and a path derived from kernel.core_pattern - but this path is interpreted relative to the root directory of the process, allowing the attacker to control where a coredump will be written with root privileges. To fix the security issue, always interpret core_pattern for dumps that are written under SUID_DUMP_ROOT relative to the root directory of init. Signed-off-by: Jann Horn <jann@thejh.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Oleg Nesterov authored
This test-case (simplified version of generated by syzkaller) #include <unistd.h> #include <sys/ptrace.h> #include <sys/wait.h> void test(void) { for (;;) { if (fork()) { wait(NULL); continue; } ptrace(PTRACE_SEIZE, getppid(), 0, 0); ptrace(PTRACE_INTERRUPT, getppid(), 0, 0); _exit(0); } } int main(void) { int np; for (np = 0; np < 8; ++np) if (!fork()) test(); while (wait(NULL) > 0) ; return 0; } triggers the 2nd WARN_ON_ONCE(!signr) warning in do_jobctl_trap(). The problem is that __ptrace_unlink() clears task->jobctl under siglock but task->ptrace is cleared without this lock held; this fools the "else" branch which assumes that !PT_SEIZED means PT_PTRACED. Note also that most of other PTRACE_SEIZE checks can race with detach from the exiting tracer too. Say, the callers of ptrace_trap_notify() assume that SEIZED can't go away after it was checked. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Maciej S. Szmigiero authored
FAT has long supported its own default file name encoding config setting, separate from CONFIG_NLS_DEFAULT. However, if UTF-8 encoded file names are desired FAT character set should not be set to utf8 since this would make file names case sensitive even if case insensitive matching is requested. Instead, "utf8" mount options should be provided to enable UTF-8 file names in FAT file system. Unfortunately, there was no possibility to set the default value of this option so on UTF-8 system "utf8" mount option had to be added manually to most FAT mounts. This patch adds config option to set such default value. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andy Lutomirski authored
x86's is_compat_task always checked the current syscall type, not the task type. It has no non-arch users any more, so just remove it to avoid confusion. On x86, nothing should really be checking the task ABI. There are legitimate users for the syscall ABI and for the mm ABI. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andy Lutomirski authored
uhid changes the format expected in write() depending on bitness. It should check the syscall bitness directly. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: David Herrmann <dh.herrmann@googlemail.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andy Lutomirski authored
The input compat code should work like all other compat code: for 32-bit syscalls, use the 32-bit ABI and for 64-bit syscalls, use the 64-bit ABI. We have a helper for that (in_compat_syscall()): just use it. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andy Lutomirski authored
amdkfd wants to know syscall type, not task type. Check directly. Unfortunately, amdkfd is making nasty assumptions that a process' bitness is a well-defined constant thing. This isn't the case on x86. I don't know how much this matters, but this patch has no effect on generated code on x86, so amdkfd is equally broken with and without this patch. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: David Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andy Lutomirski authored
This should make no difference on any architecture, as x86's historical is_compat_task behavior really did check whether the calling syscall was a compat syscall. x86's is_compat_task is going away, though. Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andy Lutomirski authored
Firewire was using is_compat_task to check whether it was in a compat ioctl or a non-compat ioctl. Use is_compat_syscall instead so it works properly on all architectures. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andy Lutomirski authored
The code wants to prevent compat code from receiving messages. Use in_compat_syscall for this. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andy Lutomirski authored
SCTP unfortunately has a different ABI for SCTP_SOCKOPT_CONNECTX3 for 32-bit and 64-bit callers. Use in_compat_syscall to correctly distinguish them on all architectures. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andy Lutomirski authored
ext4 treats directory offsets differently for 32-bit and 64-bit callers. Check the caller type using in_compat_syscall, not is_compat_task. This changes behavior on SPARC slightly. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andy Lutomirski authored
AFAICT, lustre is trying to determine syscall bitness. Use the new accessor. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andy Lutomirski authored
Except on SPARC, this is what the code always did. SPARC compat seccomp was buggy, although the impact of the bug was limited because SPARC 32-bit and 64-bit syscall numbers are the same. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Paul Moore <paul@paul-moore.com> Cc: Eric Paris <eparis@redhat.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andy Lutomirski authored
Users of the 32-bit ptrace() ABI expect the full 32-bit ABI. siginfo translation should check ptrace() ABI, not caller task ABI. This is an ABI change on SPARC. Let's hope that no one relied on the old buggy ABI. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andy Lutomirski authored
Seccomp wants to know the syscall bitness, not the caller task bitness, when it selects the syscall whitelist. As far as I know, this makes no difference on any architecture, so it's not a security problem. (It generates identical code everywhere except sparc, and, on sparc, the syscall numbering is the same for both ABIs.) Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andy Lutomirski authored
Sparc's syscall_get_arch was buggy: it returned the task arch, not the syscall arch. This could confuse seccomp and audit. I don't think this is as bad for seccomp as it looks: sparc's 32-bit and 64-bit syscalls are numbered the same. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andy Lutomirski authored
On sparc64 compat-enabled kernels, any task can make 32-bit and 64-bit syscalls. is_compat_task returns true in 32-bit tasks, which does not necessarily imply that the current syscall is 32-bit. Provide an in_compat_syscall implementation that checks whether the current syscall is compat. As far as I know, sparc is the only architecture on which is_compat_task checks the compat status of the task and on which the compat status of a syscall can differ from the compat status of the task. On x86, is_compat_task checks the syscall type, not the task type. [akpm@linux-foundation.org: add comment, per Sam] [akpm@linux-foundation.org: update comment, per Andy] Signed-off-by: Andy Lutomirski <luto@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andy Lutomirski authored
A lot of code currently abuses is_compat_task to determine this. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: David Airlie <airlied@linux.ie> Cc: David Herrmann <dh.herrmann@googlemail.com> Cc: David Miller <davem@davemloft.net> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Eric Paris <eparis@redhat.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: Jiri Kosina <jkosina@suse.cz> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul Moore <paul@paul-moore.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Tetsuo Handa authored
When new timeout is written to /proc/sys/kernel/hung_task_timeout_secs, khungtaskd is interrupted and again sleeps for full timeout duration. This means that hang task will not be checked if new timeout is written periodically within old timeout duration and/or checking of hang task will be delayed for up to previous timeout duration. Fix this by remembering last time khungtaskd checked hang task. This change will allow other watchdog tasks (if any) to share khungtaskd by sleeping for minimal timeout diff of all watchdog tasks. Doing more watchdog tasks from khungtaskd will reduce the possibility of printk() collisions by multiple watchdog threads. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Aaron Tomlin <atomlin@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Minchan Kim authored
Commit b430e9d1 ("remove compressed copy from zram in-memory") applied swap_slot_free_notify call in *end_swap_bio_read* to remove duplicated memory between zram and memory. However, with the introduction of rw_page in zram: 8c7f0102 ("zram: implement rw_page operation of zram"), it became void because rw_page doesn't need bio. Memory footprint is really important in embedded platforms which have small memory, for example, 512M) recently because it could start to kill processes if memory footprint exceeds some threshold by LMK or some similar memory management modules. This patch restores the function for rw_page, thereby eliminating this duplication. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: karam.lee <karam.lee@lge.com> Cc: <sangseok.lee@lge.com> Cc: Chan Jeong <chan.jeong@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Gang He authored
This document will describe OCFS2 online file check feature. OCFS2 is often used in high-availaibility systems. However, OCFS2 usually converts the filesystem to read-only when encounters an error. This may not be necessary, since turning the filesystem read-only would affect other running processes as well, decreasing availability. Then, a mount option (errors=continue) is introduced, which would return the -EIO errno to the calling process and terminate furhter processing so that the filesystem is not corrupted further. The filesystem is not converted to read-only, and the problematic file's inode number is reported in the kernel log. The user can try to check/fix this file via online filecheck feature. Signed-off-by: Gang He <ghe@suse.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-