1. 28 Sep, 2018 14 commits
  2. 27 Sep, 2018 20 commits
    • Masashi Honma's avatar
      nl80211: Fix possible Spectre-v1 for CQM RSSI thresholds · 1222a160
      Masashi Honma authored
      Use array_index_nospec() to sanitize i with respect to speculation.
      
      Note that the user doesn't control i directly, but can make it out
      of bounds by not finding a threshold in the array.
      Signed-off-by: default avatarMasashi Honma <masashi.honma@gmail.com>
      [add note about user control, as explained by Masashi]
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      1222a160
    • Maciej Żenczykowski's avatar
      net-tcp: /proc/sys/net/ipv4/tcp_probe_interval is a u32 not int · d4ce5808
      Maciej Żenczykowski authored
      (fix documentation and sysctl access to treat it as such)
      
      Tested:
        # zcat /proc/config.gz | egrep ^CONFIG_HZ
        CONFIG_HZ_1000=y
        CONFIG_HZ=1000
        # echo $[(1<<32)/1000 + 1] | tee /proc/sys/net/ipv4/tcp_probe_interval
        4294968
        tee: /proc/sys/net/ipv4/tcp_probe_interval: Invalid argument
        # echo $[(1<<32)/1000] | tee /proc/sys/net/ipv4/tcp_probe_interval
        4294967
        # echo 0 | tee /proc/sys/net/ipv4/tcp_probe_interval
        # echo -1 | tee /proc/sys/net/ipv4/tcp_probe_interval
        -1
        tee: /proc/sys/net/ipv4/tcp_probe_interval: Invalid argument
      Signed-off-by: default avatarMaciej Żenczykowski <maze@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d4ce5808
    • Michael Chan's avatar
      bnxt_en: Fix TX timeout during netpoll. · 73f21c65
      Michael Chan authored
      The current netpoll implementation in the bnxt_en driver has problems
      that may miss TX completion events.  bnxt_poll_work() in effect is
      only handling at most 1 TX packet before exiting.  In addition,
      there may be in flight TX completions that ->poll() may miss even
      after we fix bnxt_poll_work() to handle all visible TX completions.
      netpoll may not call ->poll() again and HW may not generate IRQ
      because the driver does not ARM the IRQ when the budget (0 for netpoll)
      is reached.
      
      We fix it by handling all TX completions and to always ARM the IRQ
      when we exit ->poll() with 0 budget.
      
      Also, the logic to ACK the completion ring in case it is almost filled
      with TX completions need to be adjusted to take care of the 0 budget
      case, as discussed with Eric Dumazet <edumazet@google.com>
      Reported-by: default avatarSong Liu <songliubraving@fb.com>
      Reviewed-by: default avatarSong Liu <songliubraving@fb.com>
      Tested-by: default avatarSong Liu <songliubraving@fb.com>
      Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      73f21c65
    • Hangbin Liu's avatar
      vxlan: fill ttl inherit info · 8fd78069
      Hangbin Liu authored
      When add vxlan ttl inherit support, I forgot to fill it when dump
      vlxan info. Fix it now.
      
      Fixes: 72f6d71e ("vxlan: add ttl inherit support")
      Signed-off-by: default avatarHangbin Liu <liuhangbin@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8fd78069
    • Andrew Lunn's avatar
      net: phy: sfp: Fix unregistering of HWMON SFP device · 3e322474
      Andrew Lunn authored
      A HWMON device is only registered is the SFP module supports the
      diagnostic page and is complient to SFF8472. Don't unconditionally
      unregister the hwmon device when the SFP module is remove, otherwise
      we access data structures which don't exist.
      Reported-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Fixes: 1323061a ("net: phy: sfp: Add HWMON support for module sensors")
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Tested-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3e322474
    • Nathan Chancellor's avatar
      qed: Avoid implicit enum conversion in qed_iwarp_parse_rx_pkt · 77f2d753
      Nathan Chancellor authored
      Clang warns when one enumerated type is implicitly converted to another.
      
      drivers/net/ethernet/qlogic/qed/qed_iwarp.c:1713:25: warning: implicit
      conversion from enumeration type 'enum tcp_ip_version' to different
      enumeration type 'enum qed_tcp_ip_version' [-Wenum-conversion]
                      cm_info->ip_version = TCP_IPV4;
                                          ~ ^~~~~~~~
      drivers/net/ethernet/qlogic/qed/qed_iwarp.c:1733:25: warning: implicit
      conversion from enumeration type 'enum tcp_ip_version' to different
      enumeration type 'enum qed_tcp_ip_version' [-Wenum-conversion]
                      cm_info->ip_version = TCP_IPV6;
                                          ~ ^~~~~~~~
      2 warnings generated.
      
      Use the appropriate values from the expected type, qed_tcp_ip_version:
      
      TCP_IPV4 = QED_TCP_IPV4 = 0
      TCP_IPV6 = QED_TCP_IPV6 = 1
      
      Link: https://github.com/ClangBuiltLinux/linux/issues/125Signed-off-by: default avatarNathan Chancellor <natechancellor@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      77f2d753
    • Nathan Chancellor's avatar
      qed: Avoid constant logical operation warning in qed_vf_pf_acquire · 1c492a9d
      Nathan Chancellor authored
      Clang warns when a constant is used in a boolean context as it thinks a
      bitwise operation may have been intended.
      
      drivers/net/ethernet/qlogic/qed/qed_vf.c:415:27: warning: use of logical
      '&&' with constant operand [-Wconstant-logical-operand]
              if (!p_iov->b_pre_fp_hsi &&
                                       ^
      drivers/net/ethernet/qlogic/qed/qed_vf.c:415:27: note: use '&' for a
      bitwise operation
              if (!p_iov->b_pre_fp_hsi &&
                                       ^~
                                       &
      drivers/net/ethernet/qlogic/qed/qed_vf.c:415:27: note: remove constant
      to silence this warning
              if (!p_iov->b_pre_fp_hsi &&
                                      ~^~
      1 warning generated.
      
      This has been here since commit 1fe614d1 ("qed: Relax VF firmware
      requirements") and I am not entirely sure why since 0 isn't a special
      case. Just remove the statement causing Clang to warn since it isn't
      required.
      
      Link: https://github.com/ClangBuiltLinux/linux/issues/126Signed-off-by: default avatarNathan Chancellor <natechancellor@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1c492a9d
    • Mahesh Bandewar's avatar
      bonding: avoid possible dead-lock · d4859d74
      Mahesh Bandewar authored
      Syzkaller reported this on a slightly older kernel but it's still
      applicable to the current kernel -
      
      ======================================================
      WARNING: possible circular locking dependency detected
      4.18.0-next-20180823+ #46 Not tainted
      ------------------------------------------------------
      syz-executor4/26841 is trying to acquire lock:
      00000000dd41ef48 ((wq_completion)bond_dev->name){+.+.}, at: flush_workqueue+0x2db/0x1e10 kernel/workqueue.c:2652
      
      but task is already holding lock:
      00000000768ab431 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:77 [inline]
      00000000768ab431 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x412/0xc30 net/core/rtnetlink.c:4708
      
      which lock already depends on the new lock.
      
      the existing dependency chain (in reverse order) is:
      
      -> #2 (rtnl_mutex){+.+.}:
             __mutex_lock_common kernel/locking/mutex.c:925 [inline]
             __mutex_lock+0x171/0x1700 kernel/locking/mutex.c:1073
             mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1088
             rtnl_lock+0x17/0x20 net/core/rtnetlink.c:77
             bond_netdev_notify drivers/net/bonding/bond_main.c:1310 [inline]
             bond_netdev_notify_work+0x44/0xd0 drivers/net/bonding/bond_main.c:1320
             process_one_work+0xc73/0x1aa0 kernel/workqueue.c:2153
             worker_thread+0x189/0x13c0 kernel/workqueue.c:2296
             kthread+0x35a/0x420 kernel/kthread.c:246
             ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415
      
      -> #1 ((work_completion)(&(&nnw->work)->work)){+.+.}:
             process_one_work+0xc0b/0x1aa0 kernel/workqueue.c:2129
             worker_thread+0x189/0x13c0 kernel/workqueue.c:2296
             kthread+0x35a/0x420 kernel/kthread.c:246
             ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415
      
      -> #0 ((wq_completion)bond_dev->name){+.+.}:
             lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901
             flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655
             drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820
             destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155
             __alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138
             bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734
             register_netdevice+0x337/0x1100 net/core/dev.c:8410
             bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453
             rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099
             rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711
             netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454
             rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729
             netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
             netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343
             netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908
             sock_sendmsg_nosec net/socket.c:622 [inline]
             sock_sendmsg+0xd5/0x120 net/socket.c:632
             ___sys_sendmsg+0x7fd/0x930 net/socket.c:2115
             __sys_sendmsg+0x11d/0x290 net/socket.c:2153
             __do_sys_sendmsg net/socket.c:2162 [inline]
             __se_sys_sendmsg net/socket.c:2160 [inline]
             __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160
             do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
             entry_SYSCALL_64_after_hwframe+0x49/0xbe
      
      other info that might help us debug this:
      
      Chain exists of:
        (wq_completion)bond_dev->name --> (work_completion)(&(&nnw->work)->work) --> rtnl_mutex
      
       Possible unsafe locking scenario:
      
             CPU0                    CPU1
             ----                    ----
        lock(rtnl_mutex);
                                     lock((work_completion)(&(&nnw->work)->work));
                                     lock(rtnl_mutex);
        lock((wq_completion)bond_dev->name);
      
       *** DEADLOCK ***
      
      1 lock held by syz-executor4/26841:
      
      stack backtrace:
      CPU: 1 PID: 26841 Comm: syz-executor4 Not tainted 4.18.0-next-20180823+ #46
      Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
      Call Trace:
       __dump_stack lib/dump_stack.c:77 [inline]
       dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
       print_circular_bug.isra.34.cold.55+0x1bd/0x27d kernel/locking/lockdep.c:1222
       check_prev_add kernel/locking/lockdep.c:1862 [inline]
       check_prevs_add kernel/locking/lockdep.c:1975 [inline]
       validate_chain kernel/locking/lockdep.c:2416 [inline]
       __lock_acquire+0x3449/0x5020 kernel/locking/lockdep.c:3412
       lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901
       flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655
       drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820
       destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155
       __alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138
       bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734
       register_netdevice+0x337/0x1100 net/core/dev.c:8410
       bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453
       rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099
       rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711
       netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454
       rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729
       netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
       netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343
       netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908
       sock_sendmsg_nosec net/socket.c:622 [inline]
       sock_sendmsg+0xd5/0x120 net/socket.c:632
       ___sys_sendmsg+0x7fd/0x930 net/socket.c:2115
       __sys_sendmsg+0x11d/0x290 net/socket.c:2153
       __do_sys_sendmsg net/socket.c:2162 [inline]
       __se_sys_sendmsg net/socket.c:2160 [inline]
       __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160
       do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      RIP: 0033:0x457089
      Code: fd b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00
      RSP: 002b:00007f2df20a5c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
      RAX: ffffffffffffffda RBX: 00007f2df20a66d4 RCX: 0000000000457089
      RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003
      RBP: 0000000000930140 R08: 0000000000000000 R09: 0000000000000000
      R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
      R13: 00000000004d40b8 R14: 00000000004c8ad8 R15: 0000000000000001
      Signed-off-by: default avatarMahesh Bandewar <maheshb@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d4859d74
    • Mahesh Bandewar's avatar
      bonding: pass link-local packets to bonding master also. · 6a9e461f
      Mahesh Bandewar authored
      Commit b89f04c6 ("bonding: deliver link-local packets with
      skb->dev set to link that packets arrived on") changed the behavior
      of how link-local-multicast packets are processed. The change in
      the behavior broke some legacy use cases where these packets are
      expected to arrive on bonding master device also.
      
      This patch passes the packet to the stack with the link it arrived
      on as well as passes to the bonding-master device to preserve the
      legacy use case.
      
      Fixes: b89f04c6 ("bonding: deliver link-local packets with skb->dev set to link that packets arrived on")
      Reported-by: default avatarMichal Soltys <soltys@ziu.info>
      Signed-off-by: default avatarMahesh Bandewar <maheshb@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6a9e461f
    • Nathan Chancellor's avatar
      qed: Avoid implicit enum conversion in qed_roce_mode_to_flavor · d3a31579
      Nathan Chancellor authored
      Clang warns when one enumerated type is implicitly converted to another.
      
      drivers/net/ethernet/qlogic/qed/qed_roce.c:153:12: warning: implicit
      conversion from enumeration type 'enum roce_mode' to different
      enumeration type 'enum roce_flavor' [-Wenum-conversion]
                      flavor = ROCE_V2_IPV6;
                             ~ ^~~~~~~~~~~~
      drivers/net/ethernet/qlogic/qed/qed_roce.c:156:12: warning: implicit
      conversion from enumeration type 'enum roce_mode' to different
      enumeration type 'enum roce_flavor' [-Wenum-conversion]
                      flavor = MAX_ROCE_MODE;
                             ~ ^~~~~~~~~~~~~
      2 warnings generated.
      
      Use the appropriate values from the expected type, roce_flavor:
      
      ROCE_V2_IPV6 = RROCE_IPV6 = 2
      MAX_ROCE_MODE = MAX_ROCE_FLAVOR = 3
      
      While we're add it, ditch the local variable flavor, we can just return
      the value directly from the switch statement.
      
      Link: https://github.com/ClangBuiltLinux/linux/issues/125Signed-off-by: default avatarNathan Chancellor <natechancellor@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d3a31579
    • Nathan Chancellor's avatar
      qed: Fix mask parameter in qed_vf_prep_tunn_req_tlv · db803f36
      Nathan Chancellor authored
      Clang complains when one enumerated type is implicitly converted to
      another.
      
      drivers/net/ethernet/qlogic/qed/qed_vf.c:686:6: warning: implicit
      conversion from enumeration type 'enum qed_tunn_mode' to different
      enumeration type 'enum qed_tunn_clss' [-Wenum-conversion]
                                       QED_MODE_L2GENEVE_TUNN,
                                       ^~~~~~~~~~~~~~~~~~~~~~
      
      Update mask's parameter to expect qed_tunn_mode, which is what was
      intended.
      
      Link: https://github.com/ClangBuiltLinux/linux/issues/125Signed-off-by: default avatarNathan Chancellor <natechancellor@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      db803f36
    • Nathan Chancellor's avatar
      qed: Avoid implicit enum conversion in qed_set_tunn_cls_info · a898fba3
      Nathan Chancellor authored
      Clang warns when one enumerated type is implicitly converted to another.
      
      drivers/net/ethernet/qlogic/qed/qed_sp_commands.c:163:25: warning:
      implicit conversion from enumeration type 'enum tunnel_clss' to
      different enumeration type 'enum qed_tunn_clss' [-Wenum-conversion]
              p_tun->vxlan.tun_cls = type;
                                   ~ ^~~~
      drivers/net/ethernet/qlogic/qed/qed_sp_commands.c:165:26: warning:
      implicit conversion from enumeration type 'enum tunnel_clss' to
      different enumeration type 'enum qed_tunn_clss' [-Wenum-conversion]
              p_tun->l2_gre.tun_cls = type;
                                    ~ ^~~~
      drivers/net/ethernet/qlogic/qed/qed_sp_commands.c:167:26: warning:
      implicit conversion from enumeration type 'enum tunnel_clss' to
      different enumeration type 'enum qed_tunn_clss' [-Wenum-conversion]
              p_tun->ip_gre.tun_cls = type;
                                    ~ ^~~~
      drivers/net/ethernet/qlogic/qed/qed_sp_commands.c:169:29: warning:
      implicit conversion from enumeration type 'enum tunnel_clss' to
      different enumeration type 'enum qed_tunn_clss' [-Wenum-conversion]
              p_tun->l2_geneve.tun_cls = type;
                                       ~ ^~~~
      drivers/net/ethernet/qlogic/qed/qed_sp_commands.c:171:29: warning:
      implicit conversion from enumeration type 'enum tunnel_clss' to
      different enumeration type 'enum qed_tunn_clss' [-Wenum-conversion]
              p_tun->ip_geneve.tun_cls = type;
                                       ~ ^~~~
      5 warnings generated.
      
      Avoid this by changing type to an int.
      
      Link: https://github.com/ClangBuiltLinux/linux/issues/125Signed-off-by: default avatarNathan Chancellor <natechancellor@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a898fba3
    • Colin Ian King's avatar
      wimax/i2400m: fix spelling mistake "not unitialized" -> "uninitialized" · 079db3fd
      Colin Ian King authored
      Trivial fix to spelling mistake in ms_to_errno array of error messages
      and remove confusing "not" from the error text since the error code
      refers to an uninitialized error code.
      Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      079db3fd
    • Colin Ian King's avatar
      qed: fix spelling mistake "toogle" -> "toggle" · 5a94df70
      Colin Ian King authored
      Trivial fix to spelling mistake in DP_VERBOSE message
      Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5a94df70
    • David S. Miller's avatar
      Merge branch 'net-phy-fix-WoL-handling-when-suspending-the-PHY' · 30ed4871
      David S. Miller authored
      Heiner Kallweit says:
      
      ====================
      net: phy: fix WoL handling when suspending the PHY
      
      phy_suspend doesn't always recognize that WoL is enabled and therefore
      suspends the PHY when it should not. First idea to address the issue
      was to reuse checks used in mdio_bus_phy_may_suspend which check
      whether relevant devices are wakeup-enabled.
      Florian raised some concerns because drivers may enable wakeup even if
      WoL isn't enabled (e.g. certain USB network drivers).
      
      The new approach focuses on reducing the risk to break existing stuff.
      We add a flag wol_enabled to struct net_device which is set in
      ethtool_set_wol(). Then this flag is checked in phy_suspend().
      This doesn't cover 100% of the cases yet (e.g. if WoL is enabled w/o
      explicit configuration), but it covers the most relevant cases with
      very little risk of regressions.
      
      v2:
      - Fix a typo
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      30ed4871
    • Heiner Kallweit's avatar
      net: phy: fix WoL handling when suspending the PHY · 93f41e67
      Heiner Kallweit authored
      Core of the problem is that phy_suspend() suspends the PHY when it
      should not because of WoL. phy_suspend() checks for WoL already, but
      this works only if the PHY driver handles WoL (what is rarely the case).
      Typically WoL is handled by the MAC driver.
      
      This patch uses new member wol_enabled of struct net_device as
      additional criteria in the check when not to suspend the PHY because
      of WoL.
      
      Last but not least change phy_detach() to call phy_suspend() before
      attached_dev is set to NULL. phy_suspend() accesses attached_dev
      when checking whether the MAC driver activated WoL.
      
      Fixes: f1e911d5 ("r8169: add basic phylib support")
      Fixes: e8cfd9d6 ("net: phy: call state machine synchronously in phy_stop")
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      93f41e67
    • Heiner Kallweit's avatar
      net: core: add member wol_enabled to struct net_device · 61941143
      Heiner Kallweit authored
      Add flag wol_enabled to struct net_device indicating whether
      Wake-on-LAN is enabled. As first user phy_suspend() will use it to
      decide whether PHY can be suspended or not.
      
      Fixes: f1e911d5 ("r8169: add basic phylib support")
      Fixes: e8cfd9d6 ("net: phy: call state machine synchronously in phy_stop")
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      61941143
    • David S. Miller's avatar
      Revert "net: phy: fix WoL handling when suspending the PHY" · d31d1d03
      David S. Miller authored
      This reverts commit e0511f6c.
      
      I commited the wrong version of these changes.
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d31d1d03
    • Heiner Kallweit's avatar
      net: phy: fix WoL handling when suspending the PHY · e0511f6c
      Heiner Kallweit authored
      Actually there's nothing wrong with the two changes marked as "Fixes",
      they just revealed a problem which has been existing before.
      After having switched r8169 to phylib it was reported that WoL from
      shutdown doesn't work any longer (WoL from suspend isn't affected).
      Reason is that during shutdown phy_disconnect()->phy_detach()->
      phy_suspend() is called.
      A similar issue occurs when the phylib state machine calls
      phy_suspend() when handling state PHY_HALTED.
      
      Core of the problem is that phy_suspend() suspends the PHY when it
      should not due to WoL. phy_suspend() checks for WoL already, but this
      works only if the PHY driver handles WoL (what is rarely the case).
      Typically WoL is handled by the MAC driver.
      
      phylib knows about this and handles it in mdio_bus_phy_may_suspend(),
      but that's used only when suspending the system, not in other cases
      like shutdown.
      
      Therefore factor out the relevant check from
      mdio_bus_phy_may_suspend() to a new function phy_may_suspend() and
      use it in phy_suspend().
      
      Last but not least change phy_detach() to call phy_suspend() before
      attached_dev is set to NULL. phy_suspend() accesses attached_dev
      when checking whether the MAC driver activated WoL.
      
      Fixes: f1e911d5 ("r8169: add basic phylib support")
      Fixes: e8cfd9d6 ("net: phy: call state machine synchronously in phy_stop")
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e0511f6c
    • David Ahern's avatar
      net/ipv6: Remove extra call to ip6_convert_metrics for multipath case · 36f19d5b
      David Ahern authored
      The change to move metrics from the dst to rt6_info moved the call
      to ip6_convert_metrics from ip6_route_add to ip6_route_info_create. In
      doing so it makes the call in ip6_route_info_append redundant and
      actually leaks the metrics installed as part of the ip6_route_info_create.
      Remove the now unnecessary call.
      
      Fixes: d4ead6b3 ("net/ipv6: move metrics from dst to rt6_info")
      Signed-off-by: default avatarDavid Ahern <dsahern@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      36f19d5b
  3. 26 Sep, 2018 6 commits