- 18 Aug, 2020 23 commits
-
-
Mark Brown authored
This patch series enables some features on the tlv3204 codec and also fixes some issues faced while testing v2: Fixed the build error from snd_soc_component_read32 v1: initial ASoC: codec: tlv3204: Codec workaround series Michael Sit Wei Hong (3): ASoC: codec: tlv3204: Enable 24 bit audio support ASoC: codec: tlv3204: Increased maximum supported channels ASoC: codec: tlv3204: Moving GPIO reset and add ADC reset sound/soc/codecs/tlv320aic32x4.c | 60 +++++++++++++++++++++++--------- 1 file changed, 44 insertions(+), 16 deletions(-) -- 2.17.1
-
Mark Brown authored
Merge series "ASoC: sun50i-codec-analog: Cleanup and power management" from Samuel Holland <samuel@sholland.org>: This series performs some minor cleanup on the driver for the analog codec in the Allwinner A64, and hooks up the existing mute switches to DAPM widgets, in order to provide improved power management. Changes since v1: - Collected Acked-by/Reviewed-by tags - Used SOC_MIXER_NAMED_CTL_ARRAY to avoid naming a widget "Earpiece" Samuel Holland (8): ASoC: sun50i-codec-analog: Fix duplicate use of ADC enable bits ASoC: sun50i-codec-analog: Gate the amplifier clock during suspend ASoC: sun50i-codec-analog: Group and sort mixer routes ASoC: sun50i-codec-analog: Make headphone routes stereo ASoC: sun50i-codec-analog: Enable DAPM for headphone switch ASoC: sun50i-codec-analog: Make line out routes stereo ASoC: sun50i-codec-analog: Enable DAPM for line out switch ASoC: sun50i-codec-analog: Enable DAPM for earpiece switch sound/soc/sunxi/sun50i-codec-analog.c | 176 ++++++++++++++++---------- 1 file changed, 111 insertions(+), 65 deletions(-) -- 2.26.2
-
Mark Brown authored
Merge series "This patch series is to enable multiple features on the Keembay Platform" from Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>: v2: Change channel-max device tree property to use new compatible string v1: Initial patch series Michael Sit Wei Hong (2): ASoC: Intel: KMB: Enable TDM audio capture dt-bindings: sound: intel,keembay-i2s: Add new compatible string .../bindings/sound/intel,keembay-i2s.yaml | 1 + sound/soc/intel/keembay/kmb_platform.c | 145 +++++++++++++----- 2 files changed, 109 insertions(+), 37 deletions(-) -- 2.17.1
-
Mark Brown authored
This series fixes a couple of issues with the digital audio codec in the Allwinner A64 SoC: 1) Left/right channels were swapped when playing/recording audio 2) DAPM topology was wrong, breaking some kcontrols This is the minimum set of changes necessary to fix these issues in a backward-compatible way. For that reason, some DAPM widgets still have incorrect or confusing names; those and other issues will be fixed in later patch sets. Samuel Holland (7): ASoC: dt-bindings: Add a new compatible for the A64 codec ASoC: sun8i-codec: Fix DAPM to match the hardware topology ASoC: sun8i-codec: Add missing mixer routes ASoC: sun8i-codec: Add a quirk for LRCK inversion ARM: dts: sun8i: a33: Update codec widget names arm64: dts: allwinner: a64: Update codec widget names arm64: dts: allwinner: a64: Update the audio codec compatible .../sound/allwinner,sun8i-a33-codec.yaml | 6 +- arch/arm/boot/dts/sun8i-a33-olinuxino.dts | 4 +- arch/arm/boot/dts/sun8i-a33.dtsi | 4 +- .../dts/allwinner/sun50i-a64-bananapi-m64.dts | 8 +- .../dts/allwinner/sun50i-a64-orangepi-win.dts | 8 +- .../boot/dts/allwinner/sun50i-a64-pine64.dts | 8 +- .../dts/allwinner/sun50i-a64-pinebook.dts | 8 +- .../dts/allwinner/sun50i-a64-pinephone.dtsi | 8 +- .../boot/dts/allwinner/sun50i-a64-pinetab.dts | 8 +- .../allwinner/sun50i-a64-sopine-baseboard.dts | 8 +- .../boot/dts/allwinner/sun50i-a64-teres-i.dts | 8 +- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 11 +- sound/soc/sunxi/sun8i-codec.c | 137 ++++++++++++++---- 13 files changed, 155 insertions(+), 71 deletions(-) -- 2.26.2
-
Mark Brown authored
This patch series drops a printk message down to dev_dbg() because it was noisy and then migrates this driver to use clk_hw based APIs instead of clk based APIs because this device is a clk provider, not a clk consumer. I've only lightly tested the last two patches but I don't have all combinations of clks for this device. Cc: Cheng-Yi Chiang <cychiang@chromium.org> Cc: Shuming Fan <shumingf@realtek.com> Stephen Boyd (3): ASoC: rt5682: Use dev_dbg() in rt5682_clk_check() ASoC: rt5682: Drop usage of __clk_get_name() ASoC: rt5682: Use clk_hw based APIs for registration sound/soc/codecs/rt5682.c | 73 ++++++++++++--------------------------- sound/soc/codecs/rt5682.h | 2 -- 2 files changed, 23 insertions(+), 52 deletions(-) Based on the last patch to this driver in linux-next. base-commit: 6301adf9 -- Sent by a computer, using git, on the internet
-
Mark Brown authored
Merge series "ASoC: SOF/Intel: fix cppcheck warnings" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: A small set of fixes to reduce the number of warnings. Pierre-Louis Bossart (5): ASOC: SOF: Intel: hda-codec: move unused label to correct position ASoC: SOF: Intel: hda-codec: move variable used conditionally ASoC: Intel: rename shadowed variable for all broadwell boards ASoC: Intel: bytcht_cx2072x: simplify return handling ASoC: Intel: sof_sdw: clarify operator precedence sound/soc/intel/boards/bdw-rt5650.c | 10 +++++----- sound/soc/intel/boards/bdw-rt5677.c | 8 ++++---- sound/soc/intel/boards/broadwell.c | 8 ++++---- sound/soc/intel/boards/bytcht_cx2072x.c | 2 +- sound/soc/intel/boards/sof_sdw.c | 2 +- sound/soc/sof/intel/hda-codec.c | 7 ++++++- 6 files changed, 21 insertions(+), 16 deletions(-) -- 2.25.1
-
Dan Murphy authored
Add device specification links for the TAS2562 and TAS2563. Signed-off-by:
Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200817172151.26564-2-dmurphy@ti.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Dan Murphy authored
Remove the tas2562 text file as the tas2562.yaml is now available. Signed-off-by:
-
Shengjiu Wang authored
On some platform(.e.g. i.MX8QM MEK), the "extal" clock is different with the mclk of codec, then the clock rate is also different. So it is better to get clock rate of "extal" rate by clk_get_rate, don't reuse the clock rate of mclk. Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/1597047103-6863-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Srinivas Kandagatla authored
Currently list of Qualcomm drivers is growing, so put them in to a proper menu so that it does not mix up with other ASOC configs in menuconfig. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200811105818.7890-1-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Sebastian Krzyszkowiak authored
This allows solutions like ALSA UCM to utilize hardware mono downmix for cases where mono output to a single speaker is desired only in specific situations (like on a mobile phone). Signed-off-by:
Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/3662154.EqNIRYjrc8@pliszkaSigned-off-by:
-
Colin Ian King authored
There are a couple of occurrences of "the the" in the Kconfig text. Fix these. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20200817224706.6139-1-colin.king@canonical.comSigned-off-by:
-
Randy Dunlap authored
Drop the repeated words {that, the} in comments. Signed-off-by:Randy Dunlap <rdunlap@infradead.org> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: alsa-devel@alsa-project.org Link: https://lore.kernel.org/r/20200808012156.10827-1-rdunlap@infradead.orgSigned-off-by:
-
Pierre-Louis Bossart authored
Follow recommendation in Documentation/scheduler/completion.rst and use macro to declare local 'struct completion' Signed-off-by:
-
Stephan Gerhold authored
Use the new common snd_soc_of_parse_aux_devs() helper function to parse auxiliary devices from the device tree. The new helper is just a copy of meson_card_add_aux_devices() so there is no functional change. Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200801100257.22658-3-stephan@gerhold.netSigned-off-by:
-
Stephan Gerhold authored
Use the new common snd_soc_of_parse_aux_devs() helper function to parse auxiliary devices from the device tree. The code is slightly different but the binding that is parsed is exactly the same. Signed-off-by:
-
Stephan Gerhold authored
simple-card.c and meson-card-utils.c use pretty much the same helper function to parse auxiliary devices from the device tree. Make it easier for other drivers to parse these from the device tree as well by adding a shared helper function to soc-core.c. snd_soc_of_parse_aux_devs() is pretty much a copy of meson_card_add_aux_devices() from meson-card-utils.c with two minor changes: - Make property name configurable as parameter - Change dev_err() message slightly for consistency with other error messages in soc-core.c Signed-off-by:Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20200801100257.22658-1-stephan@gerhold.netSigned-off-by:
-
Shengjiu Wang authored
"AVDD" is for analog power supply, "DVDD" is for digital power supply, they can improve the power management. As the regulator is enabled in pm runtime resume, which is behind the component driver probe, so accessing registers in component driver probe will fail. Fix this issue by enabling regcache_cache_only after pm_runtime_enable. Signed-off-by:
-
Shengjiu Wang authored
AVDD-supply is for Analog power supply DVDD-supply is for Digital power supply Signed-off-by:
-
Brent Lu authored
Add an binary mixer 'ELD' to each HDMI PCM device so user space could read the ELD data of external HDMI display. Signed-off-by:
Brent Lu <brent.lu@intel.com> Link: https://lore.kernel.org/r/20200818004413.12852-1-brent.lu@intel.comSigned-off-by:
-
Youling Tang authored
There is some spelling mistakes in a dev_err message. Fix it. Signed-off-by:
Youling Tang <tangyouling@loongson.cn> Link: https://lore.kernel.org/r/1597299157-32221-1-git-send-email-tangyouling@loongson.cnSigned-off-by:
-
Randy Dunlap authored
Drop the repeated words {start, it, the} in comments. Signed-off-by: -
Randy Dunlap authored
Drop the repeated words {related, we, is, the} in comments. Signed-off-by:
-
- 17 Aug, 2020 17 commits
-
-
Michael Sit Wei Hong authored
Add a new compatible string that configures the interface to the desired format. Signed-off-by:
Michael Sit Wei Hong <michael.wei.hong.sit@intel.com> Reviewed-by:
Sia Jee Heng <jee.heng.sia@intel.com> Reviewed-by:
-
Michael Sit Wei Hong authored
Enable I2S TDM audio capture for Intel Keem Bay platform. The I2S TDM will support 4 channel and 8 channel audio capture only. 4 channel and 8 channel audio capture operates only in slave mode. Signed-off-by:
-
Michael Sit Wei Hong authored
Moving GPIO reset to a later stage and before clock registration to ensure that the host system and codec clocks are in sync. If the host register clock values prior to gpio reset, the last configured codec clock is registered to the host. The codec then gets gpio resetted setting the codec clocks to their default value, causing a mismatch. Host system will skip clock setting thinking the codec clocks are already at the requested rate. ADC reset is added to ensure the next audio capture does not have undesired artifacts. It is probably related to the original code where the probe function resets the ADC prior to 1st record. Signed-off-by:
-
Michael Sit Wei Hong authored
Increased maximum supported channel to 8 channels for audio capture running in TDM mode. Signed-off-by:
-
Michael Sit Wei Hong authored
Enable 24 bit in 32 bit container audio support. Using the params_physical_width to differentiate 24 bit in 32 bit container and 24 bit in 24 bit container modes. Use the sample rate, bit depth and channel parameters to calculate the bit clock needed. Signed-off-by:
-
Samuel Holland authored
By including the earpiece mute switch in the DAPM graph, both the earpiece amplifier and the Mixer/DAC inputs can be powered off when the earpiece is muted. While the widget is really just a simple switch, it is represented as a "mixer with named controls" to avoid including the widget name in the kcontrol name. Otherwise, it is not possible to give the widget an accurate, descriptive name without changing the kcontrol name seen by userspace (which should be stable). The mute switch is between the source selection and the amplifier, as per the diagram in the SoC manual. Signed-off-by:
Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20200726025334.59931-9-samuel@sholland.orgSigned-off-by:
-
Samuel Holland authored
By including the line out mute switch in the DAPM graph, the Mixer/DAC inputs can be powered off when the line output is muted. The line outputs have an unusual routing scheme. The left side mute switch is between the source selection and the amplifier, as usual. The right side source selection comes *after* its amplifier (and after the left side amplifier), and its mute switch controls whichever source is currently selected. This matches the diagram in the SoC manual. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20200726025334.59931-8-samuel@sholland.orgSigned-off-by:
-
Samuel Holland authored
This matches the hardware more accurately, and is necessary for including the (stereo) line out mute switch in the DAPM graph. Signed-off-by:
-
Samuel Holland authored
By including the headphone mute switch to the DAPM graph, both the headphone amplifier and the Mixer/DAC inputs can be powered off when the headphones are muted. The mute switch is between the source selection and the amplifier, as per the diagram in the SoC manual. Signed-off-by:
-
Samuel Holland authored
This matches the hardware more accurately, and is necessary for including the (stereo) headphone mute switch in the DAPM graph. Signed-off-by:
-
Samuel Holland authored
Sort the controls in the same order as the bits in the register. Then group the routes by sink, and sort them in the same order as the controls. This makes it much easier to verify that all mixer inputs are accounted for. Signed-off-by:
-
Samuel Holland authored
The clock must be running for the zero-crossing mute functionality. However, it must be gated for VDD-SYS to be turned off during system suspend. Disable it in the suspend callback, after everything has already been muted, to avoid pops when muting/unmuting outputs. Signed-off-by:
-
Samuel Holland authored
The same enable bits are currently used for both the "Left/Right ADC" and the "Left/Right ADC Mixer" widgets. This happens to work in practice because the widgets are always enabled/disabled at the same time, but each register bit should only be associated with a single widget. To keep symmetry with the DAC widgets, keep the bits on the ADC widgets, and remove them from the ADC Mixer widgets. Fixes: 42371f32 ("ASoC: sunxi: Add new driver for Allwinner A64 codec's analog path controls") Reported-by:
Ondrej Jirman <megous@megous.com> Signed-off-by:
-
Pierre-Louis Bossart authored
Fix cppcheck warning: sound/soc/intel/boards/bytcht_cx2072x.c:102:9: warning: Identical condition and return expression 'ret', return value is always 0 [identicalConditionAfterEarlyExit] Signed-off-by:
-
Pierre-Louis Bossart authored
Fix cppcheck warnings: sound/soc/intel/boards/bdw-rt5650.c:91:23: style: Local variable 'channels' shadows outer variable [shadowVariable] sound/soc/intel/boards/bdw-rt5677.c:144:23: style: Local variable 'channels' shadows outer variable [shadowVariable] sound/soc/intel/boards/broadwell.c:91:23: style: Local variable 'channels' shadows outer variable [shadowVariable] This was fixed earlier in other machine drivers but keeps coming back with copy/paste. Signed-off-by:
-
Pierre-Louis Bossart authored
Cppcheck reports the following warning: sound/soc/sof/intel/hda-codec.c:122:20: style: Unused variable: codec [unusedVariable] struct hda_codec *codec; ^ Move declaration inside a conditionally-compiled block. Signed-off-by: -
Pierre-Louis Bossart authored
Cppcheck reports the following warning: sound/soc/sof/intel/hda-codec.c:191:1: style: Label 'error' is not used. [unusedLabel] This label is indeed only used conditionally, move it where it's actually used. Signed-off-by:
-
