- 17 Aug, 2020 4 commits
-
-
Ville Syrjälä authored
Explicitly check for i830 when assigning the .get_cdclk() vfunc, and then deal with the case of not having assigned the vfunc separately. Less confusing, and gets rid of the checkpatch complaint about using {} on one branch but not the others. Signed-off-by:Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200714152626.380-3-ville.syrjala@linux.intel.comReviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Ville Syrjälä authored
Some spaces have snuck in where we want tabs. Fix it. Signed-off-by:
-
Ville Syrjälä authored
There's a pointless hole in struct intel_cdclk_vals, get rid of it. Fortunately we already use named initializers so the order does not matter. Signed-off-by:
-
Ville Syrjälä authored
Since g4x the CFB base only takes a 28bit offset into stolen. Not sure if the CFB is allowed to start below that limit but then extend beyond it. Let's assume not and just restrict the allocation to the first 256MiB (in the unlikely case we have more stolen than that). v2: s/BIT/BIT_ULL/ (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
- 12 Aug, 2020 2 commits
-
-
Christian König authored
This reverts commit 2ddef176. As it turned out VMWGFX needs a much wider audit to fix this. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
git://people.freedesktop.org/~sroland/linuxDave Airlie authored
The drm_mode_config_reset patches are very important fixing a recently introduced kernel crash, the others fix various older issues which are a bit less serious in practice. Signed-off-by:
-
- 11 Aug, 2020 12 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
amd-drm-fixes-5.9-2020-08-07: amdgpu: - Re-add spelling typo fix - Sienna Cichlid fixes - Navy Flounder fixes - DC fixes - SMU i2c fix - Power fixes Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
* backmerge from drm-fixes at v5.8-rc7 * add orientation quirk for ASUS T103HAF * drm/omap: force runtime PM suspend on system suspend * drm/tidss: fix modeset init for DPI panels * re-added docs for drm_gem_flink_ioctl() * ttm: fix page-offset calculation within TTM Signed-off-by:
-
Dave Airlie authored
I need to backmerge 5.8 as I've got a bunch of fixes sitting on an rc7 base that I want to land. Signed-off-by: -
Colin Ian King authored
There is a spelling mistake in a DRM_ERROR message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Roland Scheidegger <sroland@vmware.com>
-
Colin Ian King authored
There is a spelling mistake in a DRM_ERROR message. Fix it. Signed-off-by:
-
Roland Scheidegger authored
Same problem as in stdu, same fix. Fixes: 51f644b4 ("drm/atomic-helper: reset vblank on crtc reset") Acked-by:
Charmaine Lee <charmainel@vmware.com> Reviewed-by:
Zack Rusin <zackr@vmware.com> Signed-off-by:
-
Roland Scheidegger authored
Same problem as in stdu, same fix. Fixes: 51f644b4 ("drm/atomic-helper: reset vblank on crtc reset") Acked-by:
-
Daniel Vetter authored
When converting to atomic the state reset was done by directly calling the functions, and before the modeset object was fully initialized. This means the various ->dev pointers weren't set up. After commit 51f644b4 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Jun 12 18:00:49 2020 +0200 drm/atomic-helper: reset vblank on crtc reset this started to oops because now we're trying to derefence drm_crtc->dev. Fix this up by entirely switching over to drm_mode_config_reset, called once everything is set up. Fixes: 51f644b4 ("drm/atomic-helper: reset vblank on crtc reset") Reported-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Tested-by:
-
Dan Carpenter authored
These if statements are supposed to be true if we ended the list_for_each_entry() loops without hitting a break statement but they don't work. In the first loop, we increment "i" after the "if (i == unit)" condition so we don't necessarily know that "i" is not equal to unit at the end of the loop. In the second loop we exit when mode is not pointing to a valid drm_display_mode struct so it doesn't make sense to check "mode->type". Fixes: a278724a ("drm/vmwgfx: Implement fbdev on kms v2") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Dan Carpenter authored
The "entry" pointer is an offset from the list head and it doesn't point to a valid vmw_legacy_display_unit struct. Presumably the intent was to point to the last entry. Also the "i++" wasn't used so I have removed that as well. Fixes: d7e1958d ("drm/vmwgfx: Support older hardware.") Signed-off-by:
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. This code was detected with the help of Coccinelle and, audited and fixed manually. Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2020-08-05' of git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next-fixes for v5.9-rc1: - Fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi - Fix a fbcon OOB read in fbdev, found by syzbot. - Mark vga_tryget static as it's not used elsewhere. - Small fixes to xlnx. - Remove null check for kfree in drm_dev_release. - Fix DRM_FORMAT_MOD_AMLOGIC_FBC definition. - Fix mode initialization in omap_connector_mode_valid(). Signed-off-by:
-
- 07 Aug, 2020 4 commits
-
-
Sandeep Raghuraman authored
Reproducing bug report here: After hibernating and resuming, DPM is not enabled. This remains the case even if you test hibernate using the steps here: https://www.kernel.org/doc/html/latest/power/basic-pm-debugging.html I debugged the problem, and figured out that in the file hardwaremanager.c, in the function, phm_enable_dynamic_state_management(), the check 'if (!hwmgr->pp_one_vf && smum_is_dpm_running(hwmgr) && !amdgpu_passthrough(adev) && adev->in_suspend)' returns true for the hibernate case, and false for the suspend case. This means that for the hibernate case, the AMDGPU driver doesn't enable DPM (even though it should) and simply returns from that function. In the suspend case, it goes ahead and enables DPM, even though it doesn't need to. I debugged further, and found out that in the case of suspend, for the CIK/Hawaii GPUs, smum_is_dpm_running(hwmgr) returns false, while in the case of hibernate, smum_is_dpm_running(hwmgr) returns true. For CIK, the ci_is_dpm_running() function calls the ci_is_smc_ram_running() function, which is ultimately used to determine if DPM is currently enabled or not, and this seems to provide the wrong answer. I've changed the ci_is_dpm_running() function to instead use the same method that some other AMD GPU chips do (e.g Fiji), which seems to read the voltage controller. I've tested on my R9 390 and it seems to work correctly for both suspend and hibernate use cases, and has been stable so far. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208839Signed-off-by:
Sandeep Raghuraman <sandy.8925@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Evan Quan authored
As VCN related dpm table setup needs VCN be in PG ungate state. Same logics applies to JPEG. V2: fix paste typo V3: code cosmetic Signed-off-by:
Evan Quan <evan.quan@amd.com> Tested-by:
Matt Coffin <mcoffin13@gmail.com> Reviewed-by:
-
Evan Quan authored
Add lock protections and avoid unnecessary actions if the PG state is already the same as required. Signed-off-by:
-
Likun Gao authored
Swith default gpu reset method for sienna_cichlid to MODE1 reset. Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
- 06 Aug, 2020 18 commits
-
-
Alex Deucher authored
The i2c init/fini functions just register the i2c adapter. There is no need to call them during hw init/fini. They only need to be called once per driver init/fini. The previous behavior broke runtime pm because we unregistered the i2c adapter during suspend. Tested-by:
Tom St Denis <tom.stdenis@amd.com> Reviewed-by:
Kevin Wang <kevin1.wang@amd.com> Signed-off-by:
-
Igor Kravchenko authored
[why] Display goes blank after driver installation. Aux tuning parameters must be used for 2.x only. Wrong dc_golden_table offset was used. [How] Implement a new enc3_hw_init function without VBIOS constants usage to be called for 3.x Calculate dc_golden_table offset using sum of base dce_info offset and golden table offset Signed-off-by:
Igor Kravchenko <Igor.Kravchenko@amd.com> Reviewed-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
-
George Shen authored
[Why] During SetPathMode and UpdatePlanes, the plane state can be null. We default to linear swizzle mode when plane state is null. This resulted in bandwidth validation failing when trying to set 8K60 mode (which previously passed validation during rebuild timing list). [How] Change the default swizzle mode from linear to 4kb_s and update pitch accordingly. Signed-off-by:
George Shen <george.shen@amd.com> Reviewed-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by:
-
JinZe.Xu authored
[How] Use dc_is_hdmi_signal to determine signal type. Signed-off-by:
JinZe.Xu <JinZe.Xu@amd.com> Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
-
Aric Cyr authored
[Why] Sink OUI supported cap is not set so driver skips programming it. [How] Revert the change the skips OUI programming if the cap is not set Signed-off-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
-
Harry Wentland authored
[Why&How] use correct logger context Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
Roman Li <Roman.Li@amd.com> Acked-by:
-
Dmytro Laktyushkin authored
Signed-off-by:
Eric Bernstein <Eric.Bernstein@amd.com> Acked-by:
-
Igor Kravchenko authored
[Why] For ver.4.4 and higher VBIOS contains default setting table. {How] Read Golden Settings Table from VBIOS, apply Aux tuning parameters. Signed-off-by: -
Eric Bernstein authored
Signed-off-by:
Chris Park <Chris.Park@amd.com> Acked-by:
-
Jiansong Chen authored
Enable GFXOFF for navy_flounder. Signed-off-by:
Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by:
-
Liu ChengZhe authored
1. For Navi12, CHIP_SIENNA_CICHLID, skip tmr load operation; 2. Check pointer before release firmware. v2: use CHIP_SIENNA_CICHLID instead v3: remove local "bool ret"; fix grammer issue v4: use my name instead of "root" v5: fix grammer issue and indent issue Signed-off-by:
Liu ChengZhe <ChengZhe.Liu@amd.com> Reviewed-by:
Luben Tuikov <luben.tuikov@amd.com> Signed-off-by:
-
Liu ChengZhe authored
Assigning false to block->status.hw overwrites PSP's previous hardware status, which causes the PSP to Resume operation after hardware init. Remove this assignment and let the PSP execute Resume operation when it is told to. v2: Remove the braces. v3: Modify the description. Signed-off-by:
-
Jiansong Chen authored
Update GC golden setting for navy_flounder. Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
-
Jiansong Chen authored
It's in accordance with pmfw 65.5.0 for navy_flounder. Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Signed-off-by:
-
Huang Rui authored
It doesn't expose PPTable descriptor on APU platform. So max/min temperature values cannot be got from APU platform. v2: Stoney needs to skip crit temperature as well. Signed-off-by:
Huang Rui <ray.huang@amd.com> Reviewed-by:
-
Aric Cyr authored
[Why] Test expects that we also read HPD_IRQ_VECTOR when checking for symbol loss as well lane status. [How] Read bytes 0x200-0x205 instead of just 0x202-0x205 Signed-off-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Eryk Brol <eryk.brol@amd.com> Signed-off-by:
-
Wyatt Wood authored
[Why] Feature requires synchronization of dig, pipe, and cursor locking between driver and fw. [How] Set flag to force psr to use hw lock mgr. Signed-off-by:
Wyatt Wood <wyatt.wood@amd.com> Reviewed-by:
-
hersen wu authored
[Why] ramp_up_dispclk_with_dpp is to change dispclk, dppclk and dprefclk according to bandwidth requirement. call stack: rv1_update_clocks --> update_clocks --> dcn10_prepare_bandwidth / dcn10_optimize_bandwidth --> prepare_bandwidth / optimize_bandwidth. before change dcn hw, prepare_bandwidth will be called first to allow enough clock, watermark for change, after end of dcn hw change, optimize_bandwidth is executed to lower clock to save power for new dcn hw settings. below is sequence of commit_planes_for_stream: step 1: prepare_bandwidth - raise clock to have enough bandwidth step 2: lock_doublebuffer_enable step 3: pipe_control_lock(true) - make dchubp register change will not take effect right way step 4: apply_ctx_for_surface - program dchubp step 5: pipe_control_lock(false) - dchubp register change take effect step 6: optimize_bandwidth --> dc_post_update_surfaces_to_stream for full_date, optimize clock to save power at end of step 1, dcn clocks (dprefclk, dispclk, dppclk) may be changed for new dchubp configuration. but real dcn hub dchubps are still running with old configuration until end of step 5. this need clocks settings at step 1 should not less than that before step 1. this is checked by two conditions: 1. if (should_set_clock(safe_to_lower , new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz) || new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz) 2. request_dpp_div = new_clocks->dispclk_khz > new_clocks->dppclk_khz the second condition is based on new dchubp configuration. dppclk for new dchubp may be different from dppclk before step 1. for example, before step 1, dchubps are as below: pipe 0: recout=(0,40,1920,980) viewport=(0,0,1920,979) pipe 1: recout=(0,0,1920,1080) viewport=(0,0,1920,1080) for dppclk for pipe0 need dppclk = dispclk new dchubp pipe split configuration: pipe 0: recout=(0,0,960,1080) viewport=(0,0,960,1080) pipe 1: recout=(960,0,960,1080) viewport=(960,0,960,1080) dppclk only needs dppclk = dispclk /2. dispclk, dppclk are not lock by otg master lock. they take effect after step 1. during this transition, dispclk are the same, but dppclk is changed to half of previous clock for old dchubp configuration between step 1 and step 6. This may cause p-state warning intermittently. [How] for new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz, we need make sure dppclk are not changed to less between step 1 and 6. for new_clocks->dispclk_khz > clk_mgr_base->clks.dispclk_khz, new display clock is raised, but we do not know ratio of new_clocks->dispclk_khz and clk_mgr_base->clks.dispclk_khz, new_clocks->dispclk_khz /2 does not guarantee equal or higher than old dppclk. we could ignore power saving different between dppclk = displck and dppclk = dispclk / 2 between step 1 and step 6. as long as safe_to_lower = false, set dpclk = dispclk to simplify condition check. CC: Stable <stable@vger.kernel.org> Signed-off-by:
Hersen Wu <hersenxs.wu@amd.com> Reviewed-by:
-
