- 28 May, 2010 4 commits
-
-
Johannes Berg authored
sparse correctly complains that __ieee80211_get_channel_mode is not static. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Prarit Bhargava authored
Fixes: drivers/net/wireless/libertas/rx.c: In function process_rxed_802_11_packet: drivers/net/wireless/libertas/rx.c:354: error: radiotap_hdr.flags may be used uninitialized in this function Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vasanthakumar Thiagarajan authored
This bug was introduced by the following commit Author: Vasanthakumar Thiagarajan <vasanth@atheros.com> Date: Thu Apr 15 17:38:46 2010 -0400 ath9k: Remove ATH9K_TX_SW_ABORTED and introduce a bool for this purpose Wrong buffer is checked for bf_tx_aborted field in ath_tx_num_badfrms(), this may result in a rate scaling with wrong feedback (number of unacked frames in this case). It is the last one in the chain of buffers for an aggregate frame that should be checked. Also it misses the initialization of this field in the buffer, this may lead to a situation where we stop the sw retransmission of failed subframes associated to this buffer. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Justin P. Mattock authored
ath_print in xmit.c should say "Reseting hardware" instead of Resetting HAL!(since HAL is being fazed out). dmesg shows: [ 8660.899624] ath: Failed to stop TX DMA in 100 msec after killing last frame [ 8660.899676] ath: Unable to stop TxDMA. Reset HAL! Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 26 May, 2010 2 commits
-
-
Christian Lamparter authored
Commit "ar9170: wait for asynchronous firmware loading" introduced a bug, which is triggered by fatal errors while the driver is initializing the device. BUG: unable to handle kernel paging request at 6b6b6bf7 IP: [<c117b567>] kobject_put+0x7/0x70 *pde = 00000000 Oops: 0000 [#1] PREEMPT last sysfs file: /sys/devices/platform/hdaps/position Modules linked in: ar9170usb [...] Pid: 6246, comm: firmware/ar9170 Not tainted 2.6.34-wl #54 EIP: 0060:[<c117b567>] EFLAGS: 00010206 CPU: 0 EIP is at kobject_put+0x7/0x70 EAX: 6b6b6bd7 EBX: f4d3d0e0 ECX: f5ba9124 EDX: f6af2a7c ESI: 00000000 EDI: f4d3d0e0 EBP: 00000000 ESP: f5e98f9c DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 Process firmware/ar9170 (pid: 6246) Stack: c12532ed 00000246 f5bfaa70 f8487353 f4d3d0e0 Call Trace: [<c12532ed>] ? device_release_driver+0x1d/0x30 [<f8487353>] ? ar9170_usb_firmware_failed+0x43/0x70 [ar9170usb] [<c125983c>] ? request_firmware_work_func+0x2c/0x70 [<c1259810>] ? request_firmware_work_func+0x0/0x70 [<c10413f4>] ? kthread+0x74/0x80 [<c1041380>] ? kthread+0x0/0x80 [<c1003136>] ? kernel_thread_helper+0x6/0x10 Code: 40 d3 f2 ff 85 c0 89 c3 74 0a ba 44 86 4c c1 e8 [...] EIP: [<c117b567>] kobject_put+0x7/0x70 SS:ESP 0068:f5e98f9c CR2: 000000006b6b6bf7 ---[ end trace e81abb992434b410 ]--- Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
This reverts commit 663cb47c. This patch was merged out of the proper order, so instead of fixing a problem with a prior (unmerged) patch, it creates one. Ooops! Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 25 May, 2010 2 commits
-
-
Felix Fietkau authored
With VEOL, Beacon transmission in ad-hoc does not currently work. I believe for larger ad-hoc networks, VEOL is too unreliable, as it can get beacon transmissions stuck during synchronization. Use SWBA based beacon trasmission similar to AP mode instead. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Benoit Papillault <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
This fixes IBSS beacon transmissions without VEOL enabled Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 24 May, 2010 12 commits
-
-
Vasanthakumar Thiagarajan authored
The functionality to keep the device awake until it is done with the rx of any mcast/bcast frames which are pending on AP should also be added to the hardwares which support auto sleep feature. This patch fixes frequent failures in ARP resolution when it is initiated by the other end. Currently auto sleep is enabled only for ar9003 in ath9k. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Randy Dunlap authored
Fix sta_info.h kernel-doc warnings: Warning(net/mac80211/sta_info.h:164): No description found for parameter 'tid_active_rx[STA_TID_NUM]' Warning(net/mac80211/sta_info.h:164): Excess struct/union/enum/typedef member 'tid_state_rx' description in 'sta_ampdu_mlme' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Randy Dunlap authored
Fix kernel-doc warnings in mac80211.h: Warning(include/net/mac80211.h:838): No description found for parameter 'ap_addr' Warning(include/net/mac80211.h:1726): No description found for parameter 'get_survey' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Dan Carpenter authored
The intent here is to test that "sta_id_r" is a valid pointer. We do this same test later on in the function. Btw iwl_add_bssid_station() is called from two places and "sta_id_r" is a valid pointer from both callers. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Dan Carpenter authored
This is obviously a small picky thing. The original error handling code doesn't free the most recent allocations which haven't been added to the hif_dev->tx.tx_buf list yet. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Dan Carpenter authored
After c11d8f89: "ath9k_htc: Simplify TX URB management" we no longer assume that tx_buf is a non-null pointer. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Gertjan van Wingerde authored
The recent changes to skb handling introduced a bug in the rt2800usb TX descriptor writing whereby the length of the USB packet wasn't calculated correctly. Found via code inspection, as the devices themselves didn't seem to mind. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Gertjan van Wingerde authored
(Based on a patch created by Ondrej Zary) In some circumstances the Ralink devices do not properly go to sleep or wake up, with timeouts occurring. Fix this by retrying telling the device that it has to wake up or sleep. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
This reverts commit 03ceedea. This patch was reported to cause a regression in which connectivity is lost and cannot be reestablished after a suspend/resume cycle. Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Tejun Heo authored
Implicit slab.h inclusion via percpu.h is about to go away. Make sure gfp.h or slab.h is included as necessary. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Helmut Schaa authored
Don't use to_pci_dev in rt2x00pci_uninitialize to get the allocated irq as it won't work for platform devices (SoC). Instead, use the irq field that's already used everywhere else. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Bruno Randolf authored
We should use the same buffer size we set up for DMA also in the hardware descriptor. Previously we used common->rx_bufsize for setting up the DMA mapping, but used skb_tailroom(skb) for the size we tell to the hardware in the descriptor itself. The problem is that skb_tailroom(skb) can give us a larger value than the size we set up for DMA before. This allows the hardware to write into memory locations not set up for DMA. In practice this should rarely happen because all packets should be smaller than the maximum 802.11 packet size. On the tested platform rx_bufsize is 2528, and we allocated an skb of 2559 bytes length (including padding for cache alignment) but sbk_tailroom() was 2592. Just consistently use rx_bufsize for all RX DMA memory sizes. Also use the return value of the descriptor setup function. Cc: stable@kernel.org Signed-off-by: Bruno Randolf <br1@einfach.org> Reviewed-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 21 May, 2010 16 commits
-
-
Johannes Berg authored
Specifying a valid channel type will get goto out rather than continuing, due to missing braces. This affects both remain on channel and action frame TX commands. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Jussi Kivilinna authored
Remove (hopefully) last use of WEXT in rndis_wlan. Replace wireless_send_event with missing cfg80211_disconnected in rndis_wlan_do_link_down_work. Reported-by: "Rogério Brito" <rbrito@ime.usp.br> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
We tried to squeeze as much AR9003 support into this kernel release cycle but there are a few features which are still being tested and developed. Some of these features are critical to the stable operation of AR9003 so for now disable AR9003 support all together. This will get re-enabled once all necessary features are in place but very likely will not happen for 2.6.35. Reviewed-by: Don Breslin <don.breslin@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
Since wdev can be NULL, check it before dereferencing it Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Juuso Oikarinen authored
The current frame length used by the driver for RX frames is the SPI bus transfer length. This length has padding bytes, which do not belong to the WLAN frame. As there is no other length information in the WLAN frame except the skb length this problem caused for instance extra ESSID's to be listed at the end of scan results (IE id 0) with zero length. Fix the frame length by removing padding. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Reinette Chatre authored
It is possible for internal scan to race against itself if the device is not returning the scan results from first requests. What happens in this case is the cleanup done during the abort of the first internal scan also cleans up part of the new scan, causing it to access memory it shouldn't. Here are details: * First internal scan is triggered and scan command sent to device. * After seven seconds there is no scan results so the watchdog timer triggers a scan abort. * The scan abort succeeds and a SCAN_COMPLETE_NOTIFICATION is received for failed scan. * During processing of SCAN_COMPLETE_NOTIFICATION we clear STATUS_SCANNING and queue the "scan_completed" work. ** At this time, since the problem that caused the internal scan in first place is still present, a new internal scan is triggered. The behavior at this point is a bit different between 2.6.34 and 2.6.35 since 2.6.35 has a lot of this synchronized. The rest of the race description will thus be generalized. ** As part of preparing for the scan "is_internal_short_scan" is set to true. * At this point the completion work for fist scan is run. As part of this there is some locking missing around the "is_internal_short_scan" variable and it is set to "false". ** Now the second scan runs and it considers itself a real (not internal0 scan and thus causes problems with wrong memory being accessed. The fix is twofold. * Since "is_internal_short_scan" should be protected by mutex, fix this in scan completion work so that changes to it can be serialized. * Do not queue a new internal scan if one is in progress. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=15824Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith authored
signal_type is enum cfg80211_signal_type. This fixes the gcc warning: scan.c: In function `cfg80211_inform_bss': scan.c:518:6: warning: comparison between `enum cfg80211_signal_type' and `enum nl80211_bss' scan.c: In function `cfg80211_inform_bss_frame': scan.c:574:6: warning: comparison between `enum cfg80211_signal_type' and `enum nl80211_bss' Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Tom Herbert authored
Fix some issues introduced in batch skb dequeuing for input_pkt_queue. The primary issue it that the queue head must be incremented only after a packet has been processed, that is only after __netif_receive_skb has been called. This is needed for the mechanism to prevent OOO packet in RFS. Also when flushing the input_pkt_queue and process_queue, the process queue should be done first to prevent OOO packets. Because the input_pkt_queue has been effectively split into two queues, the calculation of the tail ptr is no longer correct. The correct value would be head+input_pkt_queue->len+process_queue->len. To avoid this calculation we added an explict input_queue_tail in softnet_data. The tail value is simply incremented when queuing to input_pkt_queue. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Oliver Hartkopp authored
As remarked by Sam Ravnborg the spin_lock variable, that has been introduced in commit 57c8a456 ("can: Fix SJA1000 command register writes on SMP systems") has not been initialized properly. This patch adds the initialization to allow spinlock debugging. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> CC: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Denis Kirjanov authored
Allocated memory for IRQs should be freed when releasing the mii_bus Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
When GRO produces fraglist entries, and the resulting skb hits an interface that is incapable of TSO but capable of FRAGLIST, we end up producing a bogus packet with gso_size non-zero. This was reported in the field with older versions of KVM that did not set the TSO bits on tuntap. This patch fixes that. Reported-by: Igor Zhang <yugzhang@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mallikarjuna R Chilakala authored
This adds support for a new copper device for 82599, device id 0x151c. This 82599 10GBase-T device uses the PHY's internal temperature sensor to guard against over-temp conditions. In this scenario the PHY will be put in a low power mode and link will no longer be able to transmit or receive any data. When this occurs, the over-temp interrupt is latched and driver logs this error message. A HW reset or power cycle is required to clear this status. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (229 commits) USB: remove unused usb_buffer_alloc and usb_buffer_free macros usb: musb: update gfp/slab.h includes USB: ftdi_sio: fix legacy SIO-device header USB: kl5usb105: reimplement using generic framework USB: kl5usb105: minor clean ups USB: kl5usb105: fix memory leak USB: io_ti: use kfifo to implement write buffering USB: io_ti: remove unsused private counter USB: ti_usb: use kfifo to implement write buffering USB: ir-usb: fix incorrect write-buffer length USB: aircable: fix incorrect write-buffer length USB: safe_serial: straighten out read processing USB: safe_serial: reimplement read using generic framework USB: safe_serial: reimplement write using generic framework usb-storage: always print quirks USB: usb-storage: trivial debug improvements USB: oti6858: use port write fifo USB: oti6858: use kfifo to implement write buffering USB: cypress_m8: use kfifo to implement write buffering USB: cypress_m8: remove unused drain define ... Fix up conflicts (due to usb_buffer_alloc/free renaming) in drivers/input/tablet/acecad.c drivers/input/tablet/kbtab.c drivers/input/tablet/wacom_sys.c drivers/media/video/gspca/gspca.c sound/usb/usbaudio.c
-
Stephen Rothwell authored
This is needed before the USB merge. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits) qlcnic: adding co maintainer ixgbe: add support for active DA cables ixgbe: dcb, do not tag tc_prio_control frames ixgbe: fix ixgbe_tx_is_paused logic ixgbe: always enable vlan strip/insert when DCB is enabled ixgbe: remove some redundant code in setting FCoE FIP filter ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp ixgbe: fix header len when unsplit packet overflows to data buffer ipv6: Never schedule DAD timer on dead address ipv6: Use POSTDAD state ipv6: Use state_lock to protect ifa state ipv6: Replace inet6_ifaddr->dead with state cxgb4: notify upper drivers if the device is already up when they load cxgb4: keep interrupts available when the ports are brought down cxgb4: fix initial addition of MAC address cnic: Return SPQ credit to bnx2x after ring setup and shutdown. cnic: Convert cnic_local_flags to atomic ops. can: Fix SJA1000 command register writes on SMP systems bridge: fix build for CONFIG_SYSFS disabled ARCNET: Limit com20020 PCI ID matches for SOHARD cards ... Fix up various conflicts with pcmcia tree drivers/net/ {pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and wireless/orinoco/spectrum_cs.c} and feature removal (Documentation/feature-removal-schedule.txt). Also fix a non-content conflict due to pm_qos_requirement getting renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c
-
- 20 May, 2010 4 commits
-
-
git://git.lwn.net/linux-2.6Linus Torvalds authored
* 'docs-next' of git://git.lwn.net/linux-2.6: Add a document describing the padata interface
-
git://git.lwn.net/linux-2.6Linus Torvalds authored
* 'viafb-next' of git://git.lwn.net/linux-2.6: (35 commits) viafb: move some include files to include/linux viafb: Eliminate some global.h references viafb: get rid of i2c debug cruft viafb: fold via_io.h into via-core.h viafb: Fix initialization error paths viafb: Do not remove gpiochip under spinlock viafb: make procfs entries optional viafb: fix proc entry removal viafb: improve misc register handling viafb: replace inb/outb viafb: move some modesetting functions to a seperate file viafb: unify modesetting functions viafb: Reserve framebuffer memory for the upcoming camera driver viafb: Add a simple VX855 DMA engine driver viafb: Add a simple interrupt management infrastructure via: Rationalize vt1636 detection viafb: Introduce viafb_find_i2c_adapter() via: Do not attempt I/O on inactive I2C adapters viafb: Turn GPIO and i2c into proper platform devices viafb: Convert GPIO and i2c to the new indexed port ops ...
-
Greg Kroah-Hartman authored
Now that all callers are converted over, remove the compatibility functions and all is good. Cc: Daniel Mack <daniel@caiaq.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Tejun Heo authored
Implicit slab.h inclusion via percpu.h is about to go away. Make sure gfp.h or slab.h is included as necessary. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-