- 15 Sep, 2017 2 commits
-
-
Jan H. Schönherr authored
We cannot add routes for gsi values >= KVM_MAX_IRQ_ROUTES -- see kvm_set_irq_routing(). Hence, there is no sense in accepting them via KVM_IRQFD. Prevent them from entering the system in the first place. Signed-off-by:
Jan H. Schönherr <jschoenh@amazon.de> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jim Mattson authored
If L1 does not specify the "use TPR shadow" VM-execution control in vmcs12, then L0 must specify the "CR8-load exiting" and "CR8-store exiting" VM-execution controls in vmcs02. Failure to do so will give the L2 VM unrestricted read/write access to the hardware CR8. This fixes CVE-2017-12154. Signed-off-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
- 14 Sep, 2017 5 commits
-
-
Ladi Prosek authored
Adding entries for exit reasons 23 - 27: KVM_EXIT_EPR KVM_EXIT_SYSTEM_EVENT KVM_EXIT_S390_STSI KVM_EXIT_IOAPIC_EOI KVM_EXIT_HYPERV Signed-off-by:
Ladi Prosek <lprosek@redhat.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com>
-
Wanpeng Li authored
qemu-system-x86-8600 [004] d..1 7205.687530: kvm_entry: vcpu 2 qemu-system-x86-8600 [004] .... 7205.687532: kvm_exit: reason EXCEPTION_NMI rip 0xffffffffa921297d info ffffeb2c0e44e018 80000b0e qemu-system-x86-8600 [004] .... 7205.687532: kvm_page_fault: address ffffeb2c0e44e018 error_code 0 qemu-system-x86-8600 [004] .... 7205.687620: kvm_try_async_get_page: gva = 0xffffeb2c0e44e018, gfn = 0x427e4e qemu-system-x86-8600 [004] .N.. 7205.687628: kvm_async_pf_not_present: token 0x8b002 gva 0xffffeb2c0e44e018 kworker/4:2-7814 [004] .... 7205.687655: kvm_async_pf_completed: gva 0xffffeb2c0e44e018 address 0x7fcc30c4e000 qemu-system-x86-8600 [004] .... 7205.687703: kvm_async_pf_ready: token 0x8b002 gva 0xffffeb2c0e44e018 qemu-system-x86-8600 [004] d..1 7205.687711: kvm_entry: vcpu 2 After running some memory intensive workload in guest, I catch the kworker which completes the GUP too quickly, and queues an "Page Ready" #PF exception after the "Page not Present" exception before the next vmentry as the above trace which will result in #DF injected to guest. This patch fixes it by clearing the queue for "Page not Present" if "Page Ready" occurs before the next vmentry since the GUP has already got the required page and shadow page table has already been fixed by "Page Ready" handler. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:Wanpeng Li <wanpeng.li@hotmail.com> Fixes: 7c90705b ("KVM: Inject asynchronous page fault into a PV guest if page is swapped out.") [Changed indentation and added clearing of injected. - Radim] Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcRadim Krčmář authored
Bug fixes for stable.
-
Wanpeng Li authored
Don't block vCPU if there is pending exception. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Suravee Suthikulpanit authored
SVM AVIC hardware accelerates guest write to APIC_EOI register (for edge-trigger interrupt), which means it does not trap to KVM. So, only enable SVM AVIC only in split irqchip mode. (e.g. launching qemu w/ option '-machine kernel_irqchip=split'). Suggested-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Fixes: 44a95dae ("KVM: x86: Detect and Initialize AVIC support") [Removed pr_debug - Radim.] Signed-off-by:
-
- 13 Sep, 2017 8 commits
-
-
Suravee Suthikulpanit authored
Modify struct kvm_x86_ops.arch.apicv_active() to take struct kvm_vcpu pointer as parameter in preparation to subsequent changes. Signed-off-by:
-
Suravee Suthikulpanit authored
Preparing the base code for subsequent changes. This does not change existing logic. Signed-off-by:
-
Radim Krčmář authored
Clang resolves __builtin_constant_p() to false even if the expression is constant in the end. The only purpose of that expression was to differentiate a case where the following expression couldn't be checked at compile-time, so we can just remove the check. Clang handles the following two correctly. Turn it into BUG_ON if there are any more problems with this. Fixes: d6321d49 ("KVM: x86: generalize guest_cpuid_has_ helpers") Reported-by:
Dmitry Vyukov <dvyukov@google.com> Reviewed-by:
-
Christian Borntraeger authored
commit 3898da94 ("KVM: avoid using rcu_dereference_protected") can trigger the following lockdep/rcu splat if the VM_CREATE ioctl fails, for example if kvm_arch_init_vm fails: WARNING: suspicious RCU usage 4.13.0+ #105 Not tainted ----------------------------- ./include/linux/kvm_host.h:481 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 no locks held by qemu-system-s39/79. stack backtrace: CPU: 0 PID: 79 Comm: qemu-system-s39 Not tainted 4.13.0+ #105 Hardware name: IBM 2964 NC9 704 (KVM/Linux) Call Trace: ([<00000000001140b2>] show_stack+0xea/0xf0) [<00000000008a68a4>] dump_stack+0x94/0xd8 [<0000000000134c12>] kvm_dev_ioctl+0x372/0x7a0 [<000000000038f940>] do_vfs_ioctl+0xa8/0x6c8 [<0000000000390004>] SyS_ioctl+0xa4/0xb8 [<00000000008c7a8c>] system_call+0xc4/0x27c no locks held by qemu-system-s39/79. We have to reset the just created users_count back to 0 to tell the check to not trigger. Reported-by:
Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Fixes: 3898da94 ("KVM: avoid using rcu_dereference_protected") Cc: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
-
Jan H. Schönherr authored
When user space sets kvm_run->immediate_exit, KVM is supposed to return quickly. However, when a vCPU is in KVM_MP_STATE_UNINITIALIZED, the value is not considered and the vCPU blocks. Fix that oversight. Fixes: 460df4c1 ("KVM: race-free exit from KVM_RUN without POSIX signals") Signed-off-by:
-
Jan H. Schönherr authored
KVM API says that KVM_RUN will return with -EINTR when a signal is pending. However, if a vCPU is in KVM_MP_STATE_UNINITIALIZED, then the return value is unconditionally -EAGAIN. Copy over some code from vcpu_run(), so that the case of a pending signal results in the expected return value. Signed-off-by:
-
Jan H. Schönherr authored
Signed-off-by:
-
Joerg Roedel authored
The commit 9dd21e104bc ('KVM: x86: simplify handling of PKRU') removed all users and providers of that call-back, but didn't remove it. Remove it now. Signed-off-by:Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
- 12 Sep, 2017 3 commits
-
-
Paul Mackerras authored
Aneesh Kumar reported seeing host crashes when running recent kernels on POWER8. The symptom was an oops like this: Unable to handle kernel paging request for data at address 0xf00000000786c620 Faulting instruction address: 0xc00000000030e1e4 Oops: Kernel access of bad area, sig: 11 [#1] LE SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: powernv_op_panel CPU: 24 PID: 6663 Comm: qemu-system-ppc Tainted: G W 4.13.0-rc7-43932-gfc36c59 #2 task: c000000fdeadfe80 task.stack: c000000fdeb68000 NIP: c00000000030e1e4 LR: c00000000030de6c CTR: c000000000103620 REGS: c000000fdeb6b450 TRAP: 0300 Tainted: G W (4.13.0-rc7-43932-gfc36c59) MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 24044428 XER: 20000000 CFAR: c00000000030e134 DAR: f00000000786c620 DSISR: 40000000 SOFTE: 0 GPR00: 0000000000000000 c000000fdeb6b6d0 c0000000010bd000 000000000000e1b0 GPR04: c00000000115e168 c000001fffa6e4b0 c00000000115d000 c000001e1b180386 GPR08: f000000000000000 c000000f9a8913e0 f00000000786c600 00007fff587d0000 GPR12: c000000fdeb68000 c00000000fb0f000 0000000000000001 00007fff587cffff GPR16: 0000000000000000 c000000000000000 00000000003fffff c000000fdebfe1f8 GPR20: 0000000000000004 c000000fdeb6b8a8 0000000000000001 0008000000000040 GPR24: 07000000000000c0 00007fff587cffff c000000fdec20bf8 00007fff587d0000 GPR28: c000000fdeca9ac0 00007fff587d0000 00007fff587c0000 00007fff587d0000 NIP [c00000000030e1e4] __get_user_pages_fast+0x434/0x1070 LR [c00000000030de6c] __get_user_pages_fast+0xbc/0x1070 Call Trace: [c000000fdeb6b6d0] [c00000000139dab8] lock_classes+0x0/0x35fe50 (unreliable) [c000000fdeb6b7e0] [c00000000030ef38] get_user_pages_fast+0xf8/0x120 [c000000fdeb6b830] [c000000000112318] kvmppc_book3s_hv_page_fault+0x308/0xf30 [c000000fdeb6b960] [c00000000010e10c] kvmppc_vcpu_run_hv+0xfdc/0x1f00 [c000000fdeb6bb20] [c0000000000e915c] kvmppc_vcpu_run+0x2c/0x40 [c000000fdeb6bb40] [c0000000000e5650] kvm_arch_vcpu_ioctl_run+0x110/0x300 [c000000fdeb6bbe0] [c0000000000d6468] kvm_vcpu_ioctl+0x528/0x900 [c000000fdeb6bd40] [c0000000003bc04c] do_vfs_ioctl+0xcc/0x950 [c000000fdeb6bde0] [c0000000003bc930] SyS_ioctl+0x60/0x100 [c000000fdeb6be30] [c00000000000b96c] system_call+0x58/0x6c Instruction dump: 7ca81a14 2fa50000 41de0010 7cc8182a 68c60002 78c6ffe2 0b060000 3cc2000a 794a3664 390610d8 e9080000 7d485214 <e90a0020> 7d435378 790507e1 408202f0 ---[ end trace fad4a342d0414aa2 ]--- It turns out that what has happened is that the SLB entry for the vmmemap region hasn't been reloaded on exit from a guest, and it has the wrong page size. Then, when the host next accesses the vmemmap region, it gets a page fault. Commit a25bd72b ("powerpc/mm/radix: Workaround prefetch issue with KVM", 2017-07-24) modified the guest exit code so that it now only clears out the SLB for hash guest. The code tests the radix flag and puts the result in a non-volatile CR field, CR2, and later branches based on CR2. Unfortunately, the kvmppc_save_tm function, which gets called between those two points, modifies all the user-visible registers in the case where the guest was in transactional or suspended state, except for a few which it restores (namely r1, r2, r9 and r13). Thus the hash/radix indication in CR2 gets corrupted. This fixes the problem by re-doing the comparison just before the result is needed. For good measure, this also adds comments next to the call sites of kvmppc_save_tm and kvmppc_restore_tm pointing out that non-volatile register state will be lost. Cc: stable@vger.kernel.org # v4.13 Fixes: a25bd72b ("powerpc/mm/radix: Workaround prefetch issue with KVM") Tested-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
Paul Mackerras authored
Commit 468808bd ("KVM: PPC: Book3S HV: Set process table for HPT guests on POWER9", 2017-01-30) added a call to kvmppc_update_lpcr() which doesn't hold the kvm->lock mutex around the call, as required. This adds the lock/unlock pair, and for good measure, includes the kvmppc_setup_partition_table() call in the locked region, since it is altering global state of the VM. This error appears not to have any fatal consequences for the host; the consequences would be that the VCPUs could end up running with different LPCR values, or an update to the LPCR value by userspace using the one_reg interface could get overwritten, or the update done by kvmhv_configure_mmu() could get overwritten. Cc: stable@vger.kernel.org # v4.10+ Fixes: 468808bd ("KVM: PPC: Book3S HV: Set process table for HPT guests on POWER9") Signed-off-by:
-
Benjamin Herrenschmidt authored
The XIVE interrupt controller on POWER9 machines doesn't support byte accesses to any register in the thread management area other than the CPPR (current processor priority register). In particular, when reading the PIPR (pending interrupt priority register), we need to do a 32-bit or 64-bit load. Cc: stable@vger.kernel.org # v4.13 Fixes: 2c4fb78f ("KVM: PPC: Book3S HV: Workaround POWER9 DD1.0 bug causing IPB bit loss") Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
- 08 Sep, 2017 14 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM updates from Radim Krčmář: "First batch of KVM changes for 4.14 Common: - improve heuristic for boosting preempted spinlocks by ignoring VCPUs in user mode ARM: - fix for decoding external abort types from guests - added support for migrating the active priority of interrupts when running a GICv2 guest on a GICv3 host - minor cleanup PPC: - expose storage keys to userspace - merge kvm-ppc-fixes with a fix that missed 4.13 because of vacations - fixes s390: - merge of kvm/master to avoid conflicts with additional sthyi fixes - wire up the no-dat enhancements in KVM - multiple epoch facility (z14 feature) - Configuration z/Architecture Mode - more sthyi fixes - gdb server range checking fix - small code cleanups x86: - emulate Hyper-V TSC frequency MSRs - add nested INVPCID - emulate EPTP switching VMFUNC - support Virtual GIF - support 5 level page tables - speedup nested VM exits by packing byte operations - speedup MMIO by using hardware provided physical address - a lot of fixes and cleanups, especially nested" * tag 'kvm-4.14-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (67 commits) KVM: arm/arm64: Support uaccess of GICC_APRn KVM: arm/arm64: Extract GICv3 max APRn index calculation KVM: arm/arm64: vITS: Drop its_ite->lpi field KVM: arm/arm64: vgic: constify seq_operations and file_operations KVM: arm/arm64: Fix guest external abort matching KVM: PPC: Book3S HV: Fix memory leak in kvm_vm_ioctl_get_htab_fd KVM: s390: vsie: cleanup mcck reinjection KVM: s390: use WARN_ON_ONCE only for checking KVM: s390: guestdbg: fix range check KVM: PPC: Book3S HV: Report storage key support to userspace KVM: PPC: Book3S HV: Fix case where HDEC is treated as 32-bit on POWER9 KVM: PPC: Book3S HV: Fix invalid use of register expression KVM: PPC: Book3S HV: Fix H_REGISTER_VPA VPA size validation KVM: PPC: Book3S HV: Fix setting of storage key in H_ENTER KVM: PPC: e500mc: Fix a NULL dereference KVM: PPC: e500: Fix some NULL dereferences on error KVM: PPC: Book3S HV: Protect updates to spapr_tce_tables list KVM: s390: we are always in czam mode KVM: s390: expose no-DAT to guest and migration support KVM: s390: sthyi: remove invalid guest write access ... -
Linus Torvalds authored
Merge tag 'linux-kselftest-4.14-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: - TAP13 framework API and converting tests to TAP13 continues. A few more tests are converted and kselftest common RUN_TESTS in lib.mk is enhanced to print TAP13 to cover test shell scripts that won't be able to use kselftest API. - Several fixes to existing tests to not fail in unsupported cases. This has been an ongoing work based on the feedback from stable release kselftest users. - A new watchdog test and much needed cleanups to the existing tests from Eugeniu Rosca. - Changes to kselftest common lib.mk framework to make RUN_TESTS a function to be called from individual test make files to run stress and destructive sub-tests. * tag 'linux-kselftest-4.14-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (41 commits) selftests: Enhance kselftest_harness.h to print which assert failed selftests: lib.mk: change RUN_TESTS to print messages in TAP13 format selftests: change lib.mk RUN_TESTS to take test list as an argument selftests: lib.mk: suppress "cd" output from run_tests target selftests: kselftest framework: change skip exit code to 0 selftests/timers: make loop consistent with array size selftests: timers: remove rtctest_setdate from run_destructive_tests selftests: timers: Fix run_destructive_tests target to handle skipped tests kselftests: timers: leap-a-day: Change default arguments to help test runs selftests: timers: drop support for !KTEST case rtc: rtctest: Improve support detection selftests/cpu-hotplug: Skip test when there is only one online cpu selftests/cpu-hotplug: exit with failure when test occured unexpected behaviors selftests: futex: convert test to use ksft TAP13 framework selftests: capabilities: convert error output to TAP13 ksft framework selftests: memfd: Align STACK_SIZE for ARM AArch64 system selftests: warn if failure is due to lack of executable bit selftests: kselftest framework: add error counter selftests: capabilities: convert the test to use TAP13 ksft framework selftests: capabilities: fix to run Non-root +ia, sgidroot => i test ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing updates from Steven Rostedt: "Nothing new in development for this release. These are mostly fixes that were found during development of changes for the next merge window and fixes that were sent to me late in the last cycle" * tag 'trace-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Apply trace_clock changes to instance max buffer tracing: Fix clear of RECORDED_TGID flag when disabling trace event tracing: Add barrier to trace_printk() buffer nesting modification ftrace: Fix memleak when unregistering dynamic ops when tracing disabled ftrace: Fix selftest goto location on error ftrace: Zero out ftrace hashes when a module is removed tracing: Only have rmmod clear buffers that its events were active in ftrace: Fix debug preempt config name in stack_tracer_{en,dis}able
-
Linus Torvalds authored
I had stupidly missed one special use of 'is_reserved_word()' when I converted the code to avoid gperf. I had changed that function to return the token ID directly rather than a pointer to the token descriptor structure, but that meant that the test for "is this a reserved word" changed from checking the return value against NULL, to checking that it wasn't negative. And while I had converted the main token parser over, I missed the special case of the typeof phrase handling. And since our dependency chain for genksyms does not include the genksyms program itself changing, my kernel rebuild didn't show the problem. Fixes: bb3290d9 ("Remove gperf usage from toolchain") Reported-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
The fix in the parent made me look at that function, and react to how illogical and illegible the array initializer was. Use named array indexes to make it clearer what is going on, and make the initializer not depend silently on the exact index numbers. [ The initializer now also shows an odd inconsistency in the naming: note the IWCM vs IWPM.. - Linus ] Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Doug Ledford <dledford@redhat.com> Signed-off-by: -
Leon Romanovsky authored
The netlink message sent with type == 0, which doesn't have any client behind it, caused to the overflow in max_num_ops array. Fix it by declaring zero number of ops for the first client. Fixes: c9901724 ("RDMA/netlink: Remove netlink clients infrastructure") Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcRadim Krčmář authored
This fix was intended for 4.13, but didn't get in because both maintainers were on vacation. Paul Mackerras: "It adds mutual exclusion between list_add_rcu and list_del_rcu calls on the kvm->arch.spapr_tce_tables list. Without this, userspace could potentially trigger corruption of the list and cause a host crash or worse."
-
Linus Torvalds authored
Remove our use of 'gperf' for generating perfect hashes from some of our build tools. This removal was prompted by Masahiro Yamada sending out a patch that removes all our pre-generated files, and when I tested it, I noticed that the gperf version I have (3.1) apparently generates code that no longer works with out code-base because the function interfaces generated by gperf have changed. We really don't care that much, and the gperf people changed their interfaces in ways that makes it annoying to work with them. Tools that make it hard to use them should not be used, and the kernel is not at all interested in some autoconf mess. So remove the gperf dependency entirely. It turns out that if you ignore the pre-generated files, the use of gperf apparently saved us a whopping fifteen lines of code. It obviously wasn't worth it, considering that the pre-generated files are about 500 lines. I sent this out as a patch about three weeks ago, and got absolutely zero responses. So let's see if anybody notices now that I merge it. Because there might be serious bugs here, but it WorksForMe(tm). * gperf-removal: Remove gperf usage from toolchain
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI updates from James Bottomley: "This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas, megaraid_sas, zfcp and a host of minor updates. The major driver change here is the elimination of the block based cciss driver in favour of the SCSI based hpsa driver (which now drives all the legacy cases cciss used to be required for). Plus a reset handler clean up and the redo of the SAS SMP handler to use bsg lib" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: scsi-mq: Always unprepare before requeuing a request scsi: Show .retries and .jiffies_at_alloc in debugfs scsi: Improve requeuing behavior scsi: Call scsi_initialize_rq() for filesystem requests scsi: qla2xxx: Reset the logo flag, after target re-login. scsi: qla2xxx: Fix slow mem alloc behind lock scsi: qla2xxx: Clear fc4f_nvme flag scsi: qla2xxx: add missing includes for qla_isr scsi: qla2xxx: Fix an integer overflow in sysfs code scsi: aacraid: report -ENOMEM to upper layer from aac_convert_sgraw2() scsi: aacraid: get rid of one level of indentation scsi: aacraid: fix indentation errors scsi: storvsc: fix memory leak on ring buffer busy scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough scsi: smartpqi: remove the smp_handler stub scsi: hpsa: remove the smp_handler stub scsi: bsg-lib: pass the release callback through bsg_setup_queue scsi: Rework handling of scsi_device.vpd_pg8[03] scsi: Rework the code for caching Vital Product Data (VPD) scsi: rcu: Introduce rcu_swap_protected() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printkLinus Torvalds authored
Pull printk updates from Petr Mladek: - Do not allow use of freed init data and code even when boot consoles are forced to stay. Also check for the init memory more precisely. - Some code clean up by starting contributors. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: printk: Clean up do_syslog() error handling printk/console: Enhance the check for consoles using init memory printk/console: Always disable boot consoles that use init memory before it is freed printk: Modify operators of printed_len and text_len
-
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/auditLinus Torvalds authored
Pull audit updates from Paul Moore: "A small pull request for audit this time, only four patches and only two with any real code changes. Those two changes are the removal of a pointless SELinux AVC initialization audit event and a fix to improve the audit timestamp overhead. The other two patches are comment cleanup and administrative updates, nothing very exciting. Everything passes our tests" * tag 'audit-pr-20170907' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: update the function comments selinux: remove AVC init audit log message audit: update the audit info in MAINTAINERS audit: Reduce overhead using a coarse clock
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull secureexec update from Kees Cook: "This series has the ultimate goal of providing a sane stack rlimit when running set*id processes. To do this, the bprm_secureexec LSM hook is collapsed into the bprm_set_creds hook so the secureexec-ness of an exec can be determined early enough to make decisions about rlimits and the resulting memory layouts. Other logic acting on the secureexec-ness of an exec is similarly consolidated. Capabilities needed some special handling, but the refactoring removed other special handling, so that was a wash" * tag 'secureexec-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: exec: Consolidate pdeath_signal clearing exec: Use sane stack rlimit under secureexec exec: Consolidate dumpability logic smack: Remove redundant pdeath_signal clearing exec: Use secureexec for clearing pdeath_signal exec: Use secureexec for setting dumpability LSM: drop bprm_secureexec hook commoncap: Move cap_elevated calculation into bprm_set_creds commoncap: Refactor to remove bprm_secureexec hook smack: Refactor to remove bprm_secureexec hook selinux: Refactor to remove bprm_secureexec hook apparmor: Refactor to remove bprm_secureexec hook binfmt: Introduce secureexec flag exec: Correct comments about "point of no return" exec: Rename bprm->cred_prepared to called_set_creds
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull gcc plugins update from Kees Cook: "This finishes the porting work on randstruct, and introduces a new option to structleak, both noted below: - For the randstruct plugin, enable automatic randomization of structures that are entirely function pointers (along with a couple designated initializer fixes). - For the structleak plugin, provide an option to perform zeroing initialization of all otherwise uninitialized stack variables that are passed by reference (Ard Biesheuvel)" * tag 'gcc-plugins-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: structleak: add option to init all vars used as byref args randstruct: Enable function pointer struct detection drivers/net/wan/z85230.c: Use designated initializers drm/amd/powerplay: rv: Use designated initializers -
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull pstore update from Kees Cook: "Make pstore permissions more versatile by removing CAP_SYSLOG requirement and defining more restrictive root directory DAC permissions default (0750, which can be adjust after boot unlike the CAP_SYSLOG check). Suggested by Nick Kralevich" * tag 'pstore-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: Revert "pstore: Honor dmesg_restrict sysctl on dmesg dumps" pstore: Make default pstorefs root dir perms 0750
-
- 07 Sep, 2017 8 commits
-
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs update from Steve French: "Enable xattr support for smb3 and also a bugfix" * tag '4.14-smb3-xattr-enable' of git://git.samba.org/sfrench/cifs-2.6: cifs: Check for timeout on Negotiate stage cifs: Add support for writing attributes on SMB2+ cifs: Add support for reading attributes on SMB2+
-
git://git.kvack.org/~bcrl/aio-nextLinus Torvalds authored
Pull aio fix from Ben LaHaise: "Improve aio-nr counting on large SMP systems. It has been in linux-next for quite some time" * git://git.kvack.org/~bcrl/aio-next: fs: aio: fix the increment of aio-nr and counting against aio-max-nr
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull quota scaling updates from Jan Kara: "This contains changes to make the quota subsystem more scalable. Reportedly it improves number of files created per second on ext4 filesystem on fast storage by about a factor of 2x" * 'quota_scaling' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (28 commits) quota: Add lock annotations to struct members quota: Reduce contention on dq_data_lock fs: Provide __inode_get_bytes() quota: Inline dquot_[re]claim_reserved_space() into callsite quota: Inline inode_{incr,decr}_space() into callsites quota: Inline functions into their callsites ext4: Disable dirty list tracking of dquots when journalling quotas quota: Allow disabling tracking of dirty dquots in a list quota: Remove dq_wait_unused from dquot quota: Move locking into clear_dquot_dirty() quota: Do not dirty bad dquots quota: Fix possible corruption of dqi_flags quota: Propagate ->quota_read errors from v2_read_file_info() quota: Fix error codes in v2_read_file_info() quota: Push dqio_sem down to ->read_file_info() quota: Push dqio_sem down to ->write_file_info() quota: Push dqio_sem down to ->get_next_id() quota: Push dqio_sem down to ->release_dqblk() quota: Remove locking for writing to the old quota format quota: Do not acquire dqio_sem for dquot overwrites in v2 format ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull UDF, reiserfs, quota, fsnotify cleanups from Jan Kara: "Several UDF, reiserfs, quota and fsnotify cleanups. Note that there is also a patch updating MAINTAINERS entry for notification subsystem to point to me as a maintainer since current entries are stale" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fsnotify: make dnotify_fsnotify_ops const isofs: Delete an unnecessary variable initialisation in isofs_read_inode() isofs: Adjust four checks for null pointers isofs: Delete an error message for a failed memory allocation in isofs_read_inode() quota_v2: Delete an error message for a failed memory allocation in v2_read_file_info() fs-udf: Delete an error message for a failed memory allocation in two functions fs-udf: Improve six size determinations fs-udf: Adjust two checks for null pointers reiserfs: fix spelling mistake: "tranasction" -> "transaction" MAINTAINERS: Update entries for notification subsystem uapi/linux/quota.h: Do not include linux/errno.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull DeviceTree updates from Rob Herring: "There's a few orphans in the conversion to %pOF printf specifiers included here that no one else picked up. Summary: - Convert more DT code to use of_property_read_* API. - Improve DT overlay support when adding multiple overlays - Convert printk's to %pOF format specifiers. Most went via subsystem trees, but picked up the remaining orphans - Correct unittests to use preferred "okay" for "status" property value - Add a KASLR seed property - Vendor prefixes for Mellanox, Theobroma System, Adaptrum, Moxa - Fix modalias buffer handling - Clean-up of include paths for building dtbs - Add bindings for amc6821, isl1208, tsl2x7x, srf02, and srf10 devices - Add nvmem bindings for MediaTek MT7623 and MT7622 SoC - Add compatible string for Allwinner H5 Mali-450 GPU - Fix links to old OpenFirmware docs with new mirror on devicetree.org - Remove status property from binding doc examples" * tag 'devicetree-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (45 commits) devicetree: Adjust status "ok" -> "okay" under drivers/of/ dt-bindings: Remove "status" from examples dt-bindings: pinctrl: sh-pfc: Use generic node name dt-bindings: Add vendor Mellanox dt-binding: net/phy: fix interrupts description virt: Convert to using %pOF instead of full_name macintosh: Convert to using %pOF instead of full_name ide: pmac: Convert to using %pOF instead of full_name microblaze: Convert to using %pOF instead of full_name dt-bindings: usb: musb: Grammar s/the/to/, s/is/are/ of: Use PLATFORM_DEVID_NONE definition of/device: Fix of_device_get_modalias() buffer handling of/device: Prevent buffer overflow in of_device_modalias() dt-bindings: add amc6821, isl1208 trivial bindings dt-bindings: add vendor prefix for Theobroma Systems of: search scripts/dtc/include-prefixes path for both CPP and DTC of: remove arch/$(SRCARCH)/boot/dts from include search path for CPP of: remove drivers/of/testcase-data from include search path for CPP of: return of_get_cpu_node from of_cpu_device_node_get if CPUs are not registered iio: srf08: add device tree binding for srf02 and srf10 ... -
git://anongit.freedesktop.org/git/drm-intelLinus Torvalds authored
Pull i916 drm fixes from Rodrigo Vivi: "Since Dave is on paternity leave we are sending drm/i915 fixes for v4.14-rc1 directly to you as he had asked us to do. The most critical ones are the GPU reset fix for gen2-4 and GVT fix for a regression that is blocking gvt init to work on your tree. The rest is general fixes for patches coming from drm-next" Acked-by:
Dave Airlie <airlied@redhat.com> * tag 'drm-intel-next-fixes-2017-09-07' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: Re-enable GTT following a device reset drm/i915: Annotate user relocs with __user drm/i915: Silence sparse by using gfp_t drm/i915: Add __rcu to radix tree slot pointer drm/i915: Fix the missing PPAT cache attributes on CNL drm/i915/gvt: Remove one duplicated MMIO drm/i915: Fix enum pipe vs. enum transcoder for the PCH transcoder drm/i915: Make i2c lock ops static drm/i915: Make i9xx_load_ycbcr_conversion_matrix() static drm/i915/edp: Increase T12 panel delay to 900 ms to fix DP AUX CH timeouts drm/i915: Ignore duplicate VMA stored within the per-object handle LUT drm/i915: Skip fence alignemnt check for the CCS plane drm/i915: Treat fb->offsets[] as a raw byte offset instead of a linear offset drm/i915: Always wake the device to flush the GTT drm/i915: Recreate vmapping even when the object is pinned drm/i915: Quietly cancel FBC activation if CRTC is turned off before worker
-
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-ledsLinus Torvalds authored
Pull LED updates from Jacek Anaszewski: "LED class drivers improvements: leds-pca955x: - add Device Tree support and bindings - use devm_led_classdev_register() - add GPIO support - prevent crippled LED class device name - check for I2C errors leds-gpio: - add optional retain-state-shutdown DT property - allow LED to retain state at shutdown leds-tlc591xx: - merge conditional tests - add missing of_node_put leds-powernv: - delete an error message for a failed memory allocation in powernv_led_create() leds-is31fl32xx.c - convert to using custom %pOF printf format specifier Constify attribute_group structures in: - leds-blinkm - leds-lm3533 Make several arrays static const in: - leds-aat1290 - leds-lp5521 - leds-lp5562 - leds-lp8501" * tag 'leds_for_4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: pca955x: check for I2C errors leds: gpio: Allow LED to retain state at shutdown dt-bindings: leds: gpio: Add optional retain-state-shutdown property leds: powernv: Delete an error message for a failed memory allocation in powernv_led_create() leds: lp8501: make several arrays static const leds: lp5562: make several arrays static const leds: lp5521: make several arrays static const leds: aat1290: make array max_mm_current_percent static const leds: pca955x: Prevent crippled LED device name leds: lm3533: constify attribute_group structure dt-bindings: leds: add pca955x leds: pca955x: add GPIO support leds: pca955x: use devm_led_classdev_register leds: pca955x: add device tree support leds: Convert to using %pOF instead of full_name leds: blinkm: constify attribute_group structures. leds: tlc591xx: add missing of_node_put leds: tlc591xx: merge conditional tests -
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine updates from Vinod Koul: "This one features the usual updates to the drivers and one good part of removing DA_SG from core as it has no users. Summary: - Remove DMA_SG support as we have no users for this feature - New driver for Altera / Intel mSGDMA IP core - Support for memset in dmatest and qcom_hidma driver - Update for non cyclic mode in k3dma, bunch of update in bam_dma, bcm sba-raid - Constify device ids across drivers" * tag 'dmaengine-4.14-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (52 commits) dmaengine: sun6i: support V3s SoC variant dmaengine: sun6i: make gate bit in sun8i's DMA engines a common quirk dmaengine: rcar-dmac: document R8A77970 bindings dmaengine: xilinx_dma: Fix error code format specifier dmaengine: altera: Use macros instead of structs to describe the registers dmaengine: ti-dma-crossbar: Fix dra7 reserve function dmaengine: pl330: constify amba_id dmaengine: pl08x: constify amba_id dmaengine: bcm-sba-raid: Remove redundant SBA_REQUEST_STATE_COMPLETED dmaengine: bcm-sba-raid: Explicitly ACK mailbox message after sending dmaengine: bcm-sba-raid: Add debugfs support dmaengine: bcm-sba-raid: Remove redundant SBA_REQUEST_STATE_RECEIVED dmaengine: bcm-sba-raid: Re-factor sba_process_deferred_requests() dmaengine: bcm-sba-raid: Pre-ack async tx descriptor dmaengine: bcm-sba-raid: Peek mbox when we have no free requests dmaengine: bcm-sba-raid: Alloc resources before registering DMA device dmaengine: bcm-sba-raid: Improve sba_issue_pending() run duration dmaengine: bcm-sba-raid: Increase number of free sba_request dmaengine: bcm-sba-raid: Allow arbitrary number free sba_request dmaengine: bcm-sba-raid: Remove reqs_free_count from sba_device ...
-
