- 10 Sep, 2020 7 commits
-
-
Kim Phillips authored
Neither IbsBrTarget nor OPDATA4 are populated in IBS Fetch mode. Don't accumulate them into raw sample user data in that case. Also, in Fetch mode, add saving the IBS Fetch Control Extended MSR. Technically, there is an ABI change here with respect to the IBS raw sample data format, but I don't see any perf driver version information being included in perf.data file headers, but, existing users can detect whether the size of the sample record has reduced by 8 bytes to determine whether the IBS driver has this fix. Fixes: 904cb367 ("perf/x86/amd/ibs: Update IBS MSRs and feature definitions") Reported-by:
Stephane Eranian <stephane.eranian@google.com> Signed-off-by:
Kim Phillips <kim.phillips@amd.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200908214740.18097-6-kim.phillips@amd.com
-
Kim Phillips authored
get_ibs_op_count() adds hardware's current count (IbsOpCurCnt) bits to its count regardless of hardware's valid status. According to the PPR for AMD Family 17h Model 31h B0 55803 Rev 0.54, if the counter rolls over, valid status is set, and the lower 7 bits of IbsOpCurCnt are randomized by hardware. Don't include those bits in the driver's event count. Fixes: 8b1e1363 ("perf/x86-ibs: Fix usage of IBS op current count") Signed-off-by:
-
Kim Phillips authored
Commit 57388912 ("perf/x86/amd: Add support for Large Increment per Cycle Events") mistakenly zeroes the upper 16 bits of the count in set_period(). That's fine for counting with perf stat, but not sampling with perf record when only Large Increment events are being sampled. To enable sampling, we sign extend the upper 16 bits of the merged counter pair as described in the Family 17h PPRs: "Software wanting to preload a value to a merged counter pair writes the high-order 16-bit value to the low-order 16 bits of the odd counter and then writes the low-order 48-bit value to the even counter. Reading the even counter of the merged counter pair returns the full 64-bit value." Fixes: 57388912 ("perf/x86/amd: Add support for Large Increment per Cycle Events") Signed-off-by:
-
Kim Phillips authored
Commit 2f217d58 ("perf/x86/amd/uncore: Set the thread mask for F17h L3 PMCs") inadvertently changed the uncore driver's behaviour wrt perf tool invocations with or without a CPU list, specified with -C / --cpu=. Change the behaviour of the driver to assume the former all-cpu (-a) case, which is the more commonly desired default. This fixes '-a -A' invocations without explicit cpu lists (-C) to not count L3 events only on behalf of the first thread of the first core in the L3 domain. BEFORE: Activity performed by the first thread of the last core (CPU#43) in CPU#40's L3 domain is not reported by CPU#40: sudo perf stat -a -A -e l3_request_g1.caching_l3_cache_accesses taskset -c 43 perf bench mem memcpy -s 32mb -l 100 -f default ... CPU36 21,835 l3_request_g1.caching_l3_cache_accesses CPU40 87,066 l3_request_g1.caching_l3_cache_accesses CPU44 17,360 l3_request_g1.caching_l3_cache_accesses ... AFTER: The L3 domain activity is now reported by CPU#40: sudo perf stat -a -A -e l3_request_g1.caching_l3_cache_accesses taskset -c 43 perf bench mem memcpy -s 32mb -l 100 -f default ... CPU36 354,891 l3_request_g1.caching_l3_cache_accesses CPU40 1,780,870 l3_request_g1.caching_l3_cache_accesses CPU44 315,062 l3_request_g1.caching_l3_cache_accesses ... Fixes: 2f217d58 ("perf/x86/amd/uncore: Set the thread mask for F17h L3 PMCs") Signed-off-by:
-
Kan Liang authored
The pmu::sched_task() is a context switch callback. It passes the cpuctx->task_ctx as a parameter to the lower code. To find the cpuctx->task_ctx, the current code iterates a cpuctx list. The same context will iterated in perf_event_context_sched_out() soon. Share the cpuctx->task_ctx can avoid the unnecessary iteration of the cpuctx list. The pmu::sched_task() is also required for the optimization case for equivalent contexts. The task_ctx_sched_out() will eventually disable and reenable the PMU when schedule out events. Add perf_pmu_disable() and perf_pmu_enable() around task_ctx_sched_out() don't break anything. Drop the cpuctx->ctx.lock for the pmu::sched_task(). The lock is for per-CPU context, which is not necessary for the per-task context schedule. No one uses sched_cb_entry, perf_sched_cb_usages, sched_cb_list, and perf_pmu_sched_task() any more. Suggested-by:
Kan Liang <kan.liang@linux.intel.com> Signed-off-by:
-
Kan Liang authored
The pmu::sched_task() is a context switch callback. It passes the cpuctx->task_ctx as a parameter to the lower code. To find the cpuctx->task_ctx, the current code iterates a cpuctx list. The same context was just iterated in perf_event_context_sched_in(), which is invoked right before the pmu::sched_task(). Reuse the cpuctx->task_ctx from perf_event_context_sched_in() can avoid the unnecessary iteration of the cpuctx list. Both pmu::sched_task and perf_event_context_sched_in() have to disable PMU. Pull the pmu::sched_task into perf_event_context_sched_in() can also save the overhead from the PMU disable and reenable. The new and old tasks may have equivalent contexts. The current code optimize this case by swapping the context, which avoids the scheduling. For this case, pmu::sched_task() is still required, e.g., restore the LBR content. Suggested-by:
-
Kan Liang authored
A warning as below may be triggered when sampling with large PEBS. [ 410.411250] perf: interrupt took too long (72145 > 71975), lowering kernel.perf_event_max_sample_rate to 2000 [ 410.724923] ------------[ cut here ]------------ [ 410.729822] WARNING: CPU: 0 PID: 16397 at arch/x86/events/core.c:1422 x86_pmu_stop+0x95/0xa0 [ 410.933811] x86_pmu_del+0x50/0x150 [ 410.937304] event_sched_out.isra.0+0xbc/0x210 [ 410.941751] group_sched_out.part.0+0x53/0xd0 [ 410.946111] ctx_sched_out+0x193/0x270 [ 410.949862] __perf_event_task_sched_out+0x32c/0x890 [ 410.954827] ? set_next_entity+0x98/0x2d0 [ 410.958841] __schedule+0x592/0x9c0 [ 410.962332] schedule+0x5f/0xd0 [ 410.965477] exit_to_usermode_loop+0x73/0x120 [ 410.969837] prepare_exit_to_usermode+0xcd/0xf0 [ 410.974369] ret_from_intr+0x2a/0x3a [ 410.977946] RIP: 0033:0x40123c [ 411.079661] ---[ end trace bc83adaea7bb664a ]--- In the non-overflow context, e.g., context switch, with large PEBS, perf may stop an event twice. An example is below. //max_samples_per_tick is adjusted to 2 //NMI is triggered intel_pmu_handle_irq() handle_pmi_common() drain_pebs() __intel_pmu_pebs_event() perf_event_overflow() __perf_event_account_interrupt() hwc->interrupts = 1 return 0 //A context switch happens right after the NMI. //In the same tick, the perf_throttled_seq is not changed. perf_event_task_sched_out() perf_pmu_sched_task() intel_pmu_drain_pebs_buffer() __intel_pmu_pebs_event() perf_event_overflow() __perf_event_account_interrupt() ++hwc->interrupts >= max_samples_per_tick return 1 x86_pmu_stop(); # First stop perf_event_context_sched_out() task_ctx_sched_out() ctx_sched_out() event_sched_out() x86_pmu_del() x86_pmu_stop(); # Second stop and trigger the warning Perf should only invoke the perf_event_overflow() in the overflow context. Current drain_pebs() is called from: - handle_pmi_common() -- overflow context - intel_pmu_pebs_sched_task() -- non-overflow context - intel_pmu_pebs_disable() -- non-overflow context - intel_pmu_auto_reload_read() -- possible overflow context With PERF_SAMPLE_READ + PERF_FORMAT_GROUP, the function may be invoked in the NMI handler. But, before calling the function, the PEBS buffer has already been drained. The __intel_pmu_pebs_event() will not be called in the possible overflow context. To fix the issue, an indicator is required to distinguish between the overflow context aka handle_pmi_common() and other cases. The dummy regs pointer can be used as the indicator. In the non-overflow context, perf should treat the last record the same as other PEBS records, and doesn't invoke the generic overflow handler. Fixes: 21509084 ("perf/x86/intel: Handle multiple records in the PEBS buffer") Reported-by:Like Xu <like.xu@linux.intel.com> Suggested-by:
-
- 18 Aug, 2020 11 commits
-
-
Kan Liang authored
Starts from Ice Lake, the TopDown metrics are directly available as fixed counters and do not require generic counters. Also, the TopDown metrics can be collected per thread. Extend the RDPMC usage to support per-thread TopDown metrics. The RDPMC index of the PERF_METRICS will be output if RDPMC users ask for the RDPMC index of the metrics events. To support per thread RDPMC TopDown, the metrics and slots counters have to be saved/restored during the context switching. The last_period and period_left are not used in the counting mode. Use the fields for saved_metric and saved_slots. Signed-off-by:
-
Kan Liang authored
Ice Lake supports the hardware TopDown metrics feature, which can free up the scarce GP counters. Update the event constraints for the metrics events. The metric counters do not exist, which are mapped to a dummy offset. The sharing between multiple users of the same metric without multiplexing is not allowed. Implement set_topdown_event_period for Ice Lake. The values in PERF_METRICS MSR are derived from the fixed counter 3. Both registers should start from zero. Implement update_topdown_event for Ice Lake. The metric is reported by multiplying the metric (fraction) with slots. To maintain accurate measurements, both registers are cleared for each update. The fixed counter 3 should always be cleared before the PERF_METRICS. Implement td_attr for the new metrics events and the new slots fixed counter. Make them visible to the perf user tools. Signed-off-by:
-
Kan Liang authored
The RDPMC base offset of fixed counters is hard-code. Use a meaningful name to replace the magic number to improve the readability of the code. Signed-off-by:
-
Kan Liang authored
Intro ===== The TopDown Microarchitecture Analysis (TMA) Method is a structured analysis methodology to identify critical performance bottlenecks in out-of-order processors. Current perf has supported the method. The method works well, but there is one problem. To collect the TopDown events, several GP counters have to be used. If a user wants to collect other events at the same time, the multiplexing probably be triggered, which impacts the accuracy. To free up the scarce GP counters, the hardware TopDown metrics feature is introduced from Ice Lake. The hardware implements an additional "metrics" register and a new Fixed Counter 3 that measures pipeline "slots". The TopDown events can be calculated from them instead. Events ====== The level 1 TopDown has four metrics. There is no event-code assigned to the TopDown metrics. Four metric events are exported as separate perf events, which map to the internal "metrics" counter register. Those events do not exist in hardware, but can be allocated by the scheduler. For the event mapping, a special 0x00 event code is used, which is reserved for fake events. The metric events start from umask 0x10. When setting up the metric events, they point to the Fixed Counter 3. They have to be specially handled. - Add the update_topdown_event() callback to read the additional metrics MSR and generate the metrics. - Add the set_topdown_event_period() callback to initialize metrics MSR and the fixed counter 3. - Add a variable n_metric_event to track the number of the accepted metrics events. The sharing between multiple users of the same metric without multiplexing is not allowed. - Only enable/disable the fixed counter 3 when there are no other active TopDown events, which avoid the unnecessary writing of the fixed control register. - Disable the PMU when reading the metrics event. The metrics MSR and the fixed counter 3 are read separately. The values may be modified by an NMI. All four metric events don't support sampling. Since they will be handled specially for event update, a flag PERF_X86_EVENT_TOPDOWN is introduced to indicate this case. The slots event can support both sampling and counting. For counting, the flag is also applied. For sampling, it will be handled normally as other normal events. Groups ====== The slots event is required in a Topdown group. To avoid reading the METRICS register multiple times, the metrics and slots value can only be updated by slots event in a group. All active slots and metrics events will be updated one time. Therefore, the slots event must be before any metric events in a Topdown group. NMI ====== The METRICS related register may be overflow. The bit 48 of the STATUS register will be set. If so, PERF_METRICS and Fixed counter 3 are required to be reset. The patch also update all active slots and metrics events in the NMI handler. The update_topdown_event() has to read two registers separately. The values may be modified by an NMI. PMU has to be disabled before calling the function. RDPMC ====== RDPMC is temporarily disabled. A later patch will enable it. Suggested-by:
-
Kan Liang authored
Current perf assumes that events in a group are independent. Close an event doesn't impact the value of the other events in the same group. If the closed event is a member, after the event closure, other events are still running like a group. If the closed event is a leader, other events are running as singleton events. Add PERF_EV_CAP_SIBLING to allow events to indicate they require being part of a group, and when the leader dies they cannot exist independently. Suggested-by:
-
Kan Liang authored
Currently, the if-else is used in the intel_pmu_disable/enable_event to check the type of an event. It works well, but with more and more types added later, e.g., perf metrics, compared to the switch statement, the if-else may impair the readability of the code. There is no harm to use the switch statement to replace the if-else here. Also, some optimizing compilers may compile a switch statement into a jump-table which is more efficient than if-else for a large number of cases. The performance gain may not be observed for now, because the number of cases is only 5, but the benefits may be observed with more and more types added in the future. Use switch to replace the if-else in the intel_pmu_disable/enable_event. If the idx is invalid, print a warning. For the case INTEL_PMC_IDX_FIXED_BTS in intel_pmu_disable_event, don't need to check the event->attr.precise_ip. Use return for the case. Signed-off-by:
-
Kan Liang authored
Bit 15 of the PERF_CAPABILITIES MSR indicates that the perf METRICS feature is supported. The perf METRICS is not a PEBS feature. Rename pebs_metrics_available perf_metrics. The bit is not used in the current code. It will be used in a later patch. Signed-off-by:
-
Kan Liang authored
The bit 48 in the PERF_GLOBAL_STATUS is used to indicate the overflow status of the PERF_METRICS counters. Move the BTS index to the bit 47. Signed-off-by:
-
Kan Liang authored
The fourth fixed counter, TOPDOWN.SLOTS, is introduced in Ice Lake to measure the level 1 TopDown events. Add MSR address and macros for the new fixed counter, which will be used in a later patch. Add comments to explain the event encoding rules for the fixed counters. Signed-off-by:
-
Kan Liang authored
Magic numbers are used in the current NMI handler for the global status bit. Use a meaningful name to replace the magic numbers to improve the readability of the code. Remove a Tab for all GLOBAL_STATUS_* and INTEL_PMC_IDX_FIXED_BTS macros to reduce the length of the line. Suggested-by:
-
Kan Liang authored
The RDPMC index is always re-calculated for the RDPMC userspace support, which is unnecessary. The RDPMC index value is stored in the variable event_base_rdpmc for the kernel usage, which can be used for RDPMC userspace support as well. Suggested-by:
-
- 16 Aug, 2020 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A few differerent things in here. Seems like syzbot got some more io_uring bits wired up, and we got a handful of reports and the associated fixes are in here. General fixes too, and a lot of them marked for stable. Lastly, a bit of fallout from the async buffered reads, where we now more easily trigger short reads. Some applications don't really like that, so the io_read() code now handles short reads internally, and got a cleanup along the way so that it's now easier to read (and documented). We're now passing tests that failed before" * tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block: io_uring: short circuit -EAGAIN for blocking read attempt io_uring: sanitize double poll handling io_uring: internally retry short reads io_uring: retain iov_iter state over io_read/io_write calls task_work: only grab task signal lock when needed io_uring: enable lookup of links holding inflight files io_uring: fail poll arm on queue proc failure io_uring: hold 'ctx' reference around task_work queue + execute fs: RWF_NOWAIT should imply IOCB_NOIO io_uring: defer file table grabbing request cleanup for locked requests io_uring: add missing REQ_F_COMP_LOCKED for nested requests io_uring: fix recursive completion locking on oveflow flush io_uring: use TWA_SIGNAL for task_work uncondtionally io_uring: account locked memory before potential error case io_uring: set ctx sq/cq entry count earlier io_uring: Fix NULL pointer dereference in loop_rw_iter() io_uring: add comments on how the async buffered read retry works io_uring: io_async_buf_func() need not test page bit
-
Mike Rapoport authored
Commit 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") converted parisc to use generic version of pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for PMD. Restore the original version of pmd_alloc_one() for parisc, just use GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and memset. Fixes: 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") Reported-by:
Meelis Roos <mroos@linux.ee> Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Tested-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lkml.kernel.org/r/9f2b5ebd-e4a4-0fa1-6cd3-4b9f6892d1ad@linux.eeSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few fixes on the block side of things: - Discard granularity fix (Coly) - rnbd cleanups (Guoqing) - md error handling fix (Dan) - md sysfs fix (Junxiao) - Fix flush request accounting, which caused an IO slowdown for some configurations (Ming) - Properly propagate loop flag for partition scanning (Lennart)" * tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block: block: fix double account of flush request's driver tag loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE rnbd: no need to set bi_end_io in rnbd_bio_map_kern rnbd: remove rnbd_dev_submit_io md-cluster: Fix potential error pointer dereference in resize_bitmaps() block: check queue's limits.discard_granularity in __blkdev_issue_discard() md: get sysfs entry after redundancy attr group create -
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fix from Palmer Dabbelt: "I collected a single fix during the merge window: we managed to break the early trap setup on !MMU, this fixes it" * tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Setup exception vector for nommu platform
-
git://git.libc.org/linux-shLinus Torvalds authored
Pull arch/sh updates from Rich Felker: "Cleanup, SECCOMP_FILTER support, message printing fixes, and other changes to arch/sh" * tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits) sh: landisk: Add missing initialization of sh_io_port_base sh: bring syscall_set_return_value in line with other architectures sh: Add SECCOMP_FILTER sh: Rearrange blocks in entry-common.S sh: switch to copy_thread_tls() sh: use the generic dma coherent remap allocator sh: don't allow non-coherent DMA for NOMMU dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig sh: unexport register_trapped_io and match_trapped_io_handler sh: don't include <asm/io_trapped.h> in <asm/io.h> sh: move the ioremap implementation out of line sh: move ioremap_fixed details out of <asm/io.h> sh: remove __KERNEL__ ifdefs from non-UAPI headers sh: sort the selects for SUPERH alphabetically sh: remove -Werror from Makefiles sh: Replace HTTP links with HTTPS ones arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA* sh: stacktrace: Remove stacktrace_ops.stack() sh: machvec: Modernize printing of kernel messages sh: pci: Modernize printing of kernel messages ...
-
- 15 Aug, 2020 16 commits
-
-
Jens Axboe authored
One case was missed in the short IO retry handling, and that's hitting -EAGAIN on a blocking attempt read (eg from io-wq context). This is a problem on sockets that are marked as non-blocking when created, they don't carry any REQ_F_NOWAIT information to help us terminate them instead of perpetually retrying. Fixes: 227c0c96 ("io_uring: internally retry short reads") Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
There's a bit of confusion on the matching pairs of poll vs double poll, depending on if the request is a pure poll (IORING_OP_POLL_ADD) or poll driven retry. Add io_poll_get_double() that returns the double poll waitqueue, if any, and io_poll_get_single() that returns the original poll waitqueue. With that, remove the argument to io_poll_remove_double(). Finally ensure that wait->private is cleared once the double poll handler has run, so that remove knows it's already been seen. Cc: stable@vger.kernel.org # v5.8 Reported-by: syzbot+7f617d4a9369028b8a2c@syzkaller.appspotmail.com Fixes: 18bceab1 ("io_uring: allow POLL_ADD with double poll_wait() users") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linuxLinus Torvalds authored
Pull more perf tools updates from Arnaldo Carvalho de Melo: "Fixes: - Fixes for 'perf bench numa'. - Always memset source before memcpy in 'perf bench mem'. - Quote CC and CXX for their arguments to fix build in environments using those variables to pass more than just the compiler names. - Fix module symbol processing, addressing regression detected via "perf test". - Allow multiple probes in record+script_probe_vfs_getname.sh 'perf test' entry. Improvements: - Add script to autogenerate socket family name id->string table from copy of kernel header, used so far in 'perf trace'. - 'perf ftrace' improvements to provide similar options for this utility so that one can go from 'perf record', 'perf trace', etc to 'perf ftrace' just by changing the name of the subcommand. - Prefer new "sched:sched_waking" trace event when it exists in 'perf sched' post processing. - Update POWER9 metrics to utilize other metrics. - Fall back to querying debuginfod if debuginfo not found locally. Miscellaneous: - Sync various kvm headers with kernel sources" * tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (40 commits) perf ftrace: Make option description initials all capital letters perf build-ids: Fall back to debuginfod query if debuginfo not found perf bench numa: Remove dead code in parse_nodes_opt() perf stat: Update POWER9 metrics to utilize other metrics perf ftrace: Add change log perf: ftrace: Add set_tracing_options() to set all trace options perf ftrace: Add option --tid to filter by thread id perf ftrace: Add option -D/--delay to delay tracing perf: ftrace: Allow set graph depth by '--graph-opts' perf ftrace: Add support for trace option tracing_thresh perf ftrace: Add option 'verbose' to show more info for graph tracer perf ftrace: Add support for tracing option 'irq-info' perf ftrace: Add support for trace option funcgraph-irqs perf ftrace: Add support for trace option sleep-time perf ftrace: Add support for tracing option 'func_stack_trace' perf tools: Add general function to parse sublevel options perf ftrace: Add option '--inherit' to trace children processes perf ftrace: Show trace column header perf ftrace: Add option '-m/--buffer-size' to set per-cpu buffer size perf ftrace: Factor out function write_tracing_file_int() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes and small updates all around the place: - Fix mitigation state sysfs output - Fix an FPU xstate/sxave code assumption bug triggered by Architectural LBR support - Fix Lightning Mountain SoC TSC frequency enumeration bug - Fix kexec debug output - Fix kexec memory range assumption bug - Fix a boundary condition in the crash kernel code - Optimize porgatory.ro generation a bit - Enable ACRN guests to use X2APIC mode - Reduce a __text_poke() IRQs-off critical section for the benefit of PREEMPT_RT" * tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/alternatives: Acquire pte lock with interrupts enabled x86/bugs/multihit: Fix mitigation reporting when VMX is not in use x86/fpu/xstate: Fix an xstate size check warning with architectural LBRs x86/purgatory: Don't generate debug info for purgatory.ro x86/tsr: Fix tsc frequency enumeration bug on Lightning Mountain SoC kexec_file: Correctly output debugging information for the PT_LOAD ELF header kexec: Improve & fix crash_exclude_mem_range() to handle overlapping ranges x86/crash: Correct the address boundary of function parameters x86/acrn: Remove redundant chars from ACRN signature x86/acrn: Allow ACRN guest to use X2APIC mode -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Two fixes: fix a new tracepoint's output value, and fix the formatting of show-state syslog printouts" * tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Fix the alignment of the show-state debug output sched: Fix use of count for nr_running tracepoint
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Misc fixes, an expansion of perf syscall access to CAP_PERFMON privileged tools, plus a RAPL HW-enablement for Intel SPR platforms" * tag 'perf-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/rapl: Add support for Intel SPR platform perf/x86/rapl: Support multiple RAPL unit quirks perf/x86/rapl: Fix missing psys sysfs attributes hw_breakpoint: Remove unused __register_perf_hw_breakpoint() declaration kprobes: Remove show_registers() function prototype perf/core: Take over CAP_SYS_PTRACE creds to CAP_PERFMON capability
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixlets from Ingo Molnar: "A documentation fix and a 'fallthrough' macro update" * tag 'locking-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Convert to use the preferred 'fallthrough' macro Documentation/locking/locktypes: Fix a typo
-
git://github.com/martinetd/linuxLinus Torvalds authored
Pull 9p updates from Dominique Martinet: - some code cleanup - a couple of static analysis fixes - setattr: try to pick a fid associated with the file rather than the dentry, which might sometimes matter * tag '9p-for-5.9-rc1' of git://github.com/martinetd/linux: 9p: Remove unneeded cast from memory allocation 9p: remove unused code in 9p net/9p: Fix sparse endian warning in trans_fd.c 9p: Fix memory leak in v9fs_mount 9p: retrieve fid from file when file instance exist.
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Three small cifs/smb3 fixes, one for stable fixing mkdir path with the 'idsfromsid' mount option" * tag '5.9-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: SMB3: Fix mkdir when idsfromsid configured on mount cifs: Convert to use the fallthrough macro cifs: Fix an error pointer dereference in cifs_mount()
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client updates from Trond Myklebust: "Stable fixes: - pNFS: Don't return layout segments that are being used for I/O - pNFS: Don't move layout segments off the active list when being used for I/O Features: - NFS: Add support for user xattrs through the NFSv4.2 protocol - NFS: Allow applications to speed up readdir+statx() using AT_STATX_DONT_SYNC - NFSv4.0 allow nconnect for v4.0 Bugfixes and cleanups: - nfs: ensure correct writeback errors are returned on close() - nfs: nfs_file_write() should check for writeback errors - nfs: Fix getxattr kernel panic and memory overflow - NFS: Fix the pNFS/flexfiles mirrored read failover code - SUNRPC: dont update timeout value on connection reset - freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS - sunrpc: destroy rpc_inode_cachep after unregister_filesystem" * tag 'nfs-for-5.9-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (32 commits) NFS: Fix flexfiles read failover fs: nfs: delete repeated words in comments rpc_pipefs: convert comma to semicolon nfs: Fix getxattr kernel panic and memory overflow NFS: Don't return layout segments that are in use NFS: Don't move layouts to plh_return_segs list while in use NFS: Add layout segment info to pnfs read/write/commit tracepoints NFS: Add tracepoints for layouterror and layoutstats. NFS: Report the stateid + status in trace_nfs4_layoutreturn_on_close() SUNRPC dont update timeout value on connection reset nfs: nfs_file_write() should check for writeback errors nfs: ensure correct writeback errors are returned on close() NFSv4.2: xattr cache: get rid of cache discard work queue NFS: remove redundant initialization of variable result NFSv4.0 allow nconnect for v4.0 freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS sunrpc: destroy rpc_inode_cachep after unregister_filesystem NFSv4.2: add client side xattr caching. NFSv4.2: hook in the user extended attribute handlers NFSv4.2: add the extended attribute proc functions. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull edac fix from Tony Luck: "Fix for the ie31200 driver that missed the first pull" * tag 'edac_updates_for_5.9_pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/ie31200: Fallback if host bridge device is already initialized
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes from Rob Herring: "Another round of 'allOf' removals and whitespace clean-ups of schemas" * tag 'devicetree-fixes-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: Remove more cases of 'allOf' containing a '$ref' dt-bindings: Whitespace clean-ups in schema files
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more ACPI updates from Rafael Wysocki: "Add new hardware support to the ACPI driver for AMD SoCs, the x86 clk driver and the Designware i2c driver (changes from Akshu Agrawal and Pu Wen)" * tag 'acpi-5.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: clk: x86: Support RV architecture ACPI: APD: Add a fmw property is_raven clk: x86: Change name from ST to FCH ACPI: APD: Change name from ST to FCH i2c: designware: Add device HID for Hygon I2C controller
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull one more power management update from Rafael Wysocki: "Modify the intel_pstate driver to allow it to work in the passive mode with hardware-managed P-states (HWP) enabled" * tag 'pm-5.9-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Implement passive mode with HWP enabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull MFD updates from Lee Jones: "Core Frameworks - Make better attempt at matching device with the correct OF node - Allow batch removal of hierarchical sub-devices New Drivers - Add STM32 Clocksource driver - Add support for Khadas System Control Microcontroller Driver Removal - Remove unused driver for TI's SMSC ECE1099 New Device Support - Add support for Intel Emmitsburg PCH to Intel LPSS PCI - Add support for Intel Tiger Lake PCH-H to Intel LPSS PCI - Add support for Dialog DA revision to Dialog DA9063 New Functionality - Add support for AXP803 to be probed by I2C Fix-ups - Numerous W=1 warning fixes - Device Tree changes (stm32-lptimer, gateworks-gsc, khadas,mcu, stmfx, cros-ec, j721e-system-controller) - Enabled Regmap 'fast I/O' in stm32-lptimer - Change BUG_ON to WARN_ON in arizona-core - Remove superfluous code/initialisation (madera, max14577) - Trivial formatting/spelling issues (madera-core, madera-i2c, da9055, max77693-private) - Switch to of_platform_populate() in sprd-sc27xx-spi - Expand out set/get brightness/pwm macros in lm3533-ctrlbank - Disable IRQs on suspend in motorola-cpcap - Clean-up error handling in intel_soc_pmic_mrfld - Ensure correct removal order of sub-devices in madera - Many s/HTTP/HTTPS/ link changes - Ensure name used with Regmap is unique in syscon Bug Fixes - Properly 'put' clock on unbind and error in arizona-core - Fix revision handling in da9063 - Fix 'assignment of read-only location' error in kempld-core - Avoid using the Regmap API when atomic in rn5t618 - Redefine volatile register description in rn5t618 - Use locking to protect event handler in dln2" * tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits) mfd: syscon: Use a unique name with regmap_config mfd: Replace HTTP links with HTTPS ones mfd: dln2: Run event handler loop under spinlock mfd: madera: Improve handling of regulator unbinding mfd: mfd-core: Add mechanism for removal of a subset of children mfd: intel_soc_pmic_mrfld: Simplify the return expression of intel_scu_ipc_dev_iowrite8() mfd: max14577: Remove redundant initialization of variable current_bits mfd: rn5t618: Fix caching of battery related registers mfd: max77693-private: Drop a duplicated word mfd: da9055: pdata.h: Drop a duplicated word mfd: rn5t618: Make restart handler atomic safe mfd: kempld-core: Fix 'assignment of read-only location' error mfd: axp20x: Allow the AXP803 to be probed by I2C mfd: da9063: Add support for latest DA silicon revision mfd: da9063: Fix revision handling to correctly select reg tables dt-bindings: mfd: st,stmfx: Remove I2C unit name dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller mfd: motorola-cpcap: Disable interrupt for suspend mfd: smsc-ece1099: Remove driver mfd: core: Add OF_MFD_CELL_REG() helper ...
-
Linus Torvalds authored
Merge more updates from Andrew Morton: "Subsystems affected by this patch series: mm/hotfixes, lz4, exec, mailmap, mm/thp, autofs, sysctl, mm/kmemleak, mm/misc and lib" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (35 commits) virtio: pci: constify ioreadX() iomem argument (as in generic implementation) ntb: intel: constify ioreadX() iomem argument (as in generic implementation) rtl818x: constify ioreadX() iomem argument (as in generic implementation) iomap: constify ioreadX() iomem argument (as in generic implementation) sh: use generic strncpy() sh: clkfwk: remove r8/r16/r32 include/asm-generic/vmlinux.lds.h: align ro_after_init mm: annotate a data race in page_zonenum() mm/swap.c: annotate data races for lru_rotate_pvecs mm/rmap: annotate a data race at tlb_flush_batched mm/mempool: fix a data race in mempool_free() mm/list_lru: fix a data race in list_lru_count_one mm/memcontrol: fix a data race in scan count mm/page_counter: fix various data races at memsw mm/swapfile: fix and annotate various data races mm/filemap.c: fix a data race in filemap_fault() mm/swap_state: mark various intentional data races mm/page_io: mark various intentional data races mm/frontswap: mark various intentional data races mm/kmemleak: silence KCSAN splats in checksum ...
-
