- 20 Aug, 2015 24 commits
-
-
Jiri Benc authored
Signed-off-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
The ip_tunnels.h include file uses mixture of __u16 and u16 (etc.) types. Unify it to the non-underscore variants. Signed-off-by:
-
Jiri Benc authored
The custom alignment of struct ip_tunnel_key is unnecessary. In struct sw_flow_key, it starts at offset 256, in struct ip_tunnel_info it's the first field. The structure is also packed even without the __packed keyword. Signed-off-by:
-
Jeremy Linton authored
Convert the xgene_get_mac_address to device_get_mac_address(), and xgene_get_phy_mode() to device_get_phy_mode(). Signed-off-by:
Jeremy Linton <jeremy.linton@arm.com> Signed-off-by:
-
David Ahern authored
Andreas reported breakage adding routes with local nexthops: $ ip route show table main ... 172.28.0.0/24 dev vnf-xe1p0 proto kernel scope link src 172.28.0.16 $ ip route add 10.0.0.0/8 via 172.28.0.32 table 100 dev vnf-xe1p0 RTNETLINK answers: Resource temporarily unavailable 3bfd8472 changed the lookup to use the passed in table but for cases like this the nexthop is in the local table rather than the passed in table. Fixes: 3bfd8472 ("net: Use passed in table for nexthop lookups") Reported-by:
Andreas Schultz <aschultz@tpip.net> Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Scott Feldman authored
.maxtype should match .policy. Probably just been getting lucky here because IFLA_BRPORT_MAX > IFLA_BR_MAX. Fixes: 13323516 ("bridge: implement rtnl_link_ops->changelink") Signed-off-by:
Scott Feldman <sfeldma@gmail.com> Signed-off-by:
-
Jeremy Linton authored
The dev==NULL check in smsc911x_probe_config is useless and isn't providing any additional protection. If a fwnode doesn't exist then an appropriate error should be returned by device_get_phy_mode() covering the original case of a missing of/fwnode. Signed-off-by:
-
Jeremy Linton authored
This patch adds MAC address length check back into the device_get_mac_addr() function before calling is_valid_ether_addr() similar to the way the OF routine does it. Update the comments for the two new functions. Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2015-08-19' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== Major changes: ath10k: * add support for qca99x0 family of devices * improve performance of tx_lock * add support for raw mode (802.11 frame format) and software crypto engine enabled via a module parameter ath9k: * add fast-xmit support wil6210: * implement TSO support * support bootloader v1 and onwards iwlwifi: * Deprecate -10.ucode * Clean ups towards multiple Rx queues * Add support for longer CMD IDs. This will be required by new firmwares since we are getting close to the u8 limit. * bugfixes for the D0i3 power state * Add basic support for FTM * polish the Miracast operation * fix a few power consumption issues * scan cleanup * fixes for D0i3 system state * add paging for devices that support it * add again the new RBD allocation model * add more options to the firmware debug system * add support for frag SKBs in Tx ==================== Signed-off-by:
-
Ying Xue authored
Make fib_encap_match() static as it isn't used outside the file. Signed-off-by:
Ying Xue <ying.xue@windriver.com> Reviewed-by:
-
David S. Miller authored
Johannes Berg says: ==================== average: convert users to inline implementation Since there's very little benefit of the out-of-line implementation (a single byte of .text in one driver as far as I've seen), convert all drivers to the inline implementation, saving memory, and remove the out-of-line implementation. ==================== Signed-off-by: -
Johannes Berg authored
Since all users are now converted to the inline implementation, remove the out-of-line implementation entirely. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
Instead of using the out-of-line EWMA calculation, use DECLARE_EWMA() to create static inlines. On x86/64 this results in code that's one byte larger (for me), but reduces struct link_ant and struct link size by the two unsigned long values that store the parameters each. Signed-off-by:
-
Johannes Berg authored
This reduces code size slightly (at least on x86/64) while also removing memory consumption by two unsigned long values for each ath5k device. Signed-off-by:
-
Johannes Berg authored
Instead of using the out-of-line EWMA calculation, use DECLARE_EWMA() to create static inlines. On x86/64 this results in no change in code size for me, but reduces the struct receive_queue size by the two unsigned long values that store the parameters. Signed-off-by:
-
Yuval Mintz authored
Commit f34fa14c ("bnx2x: Add vxlan RSS support") has introduced an endianity issue when passing the vxlan UDP port to the HW. Reported-by: <fengguang.wu@intel.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
-
David S. Miller authored
Nikolay Aleksandrov says: ==================== vrf: cleanups part 2 This is the next part of vrf cleanups, patch 1 drops the SLAB_PANIC when creating kmem cache since it's handled, patch 02 removes a slave duplicate check which is already done by the lower/upper code, patch 3 moves the ndo_add_slave code around a bit so we can drop an error label and patch 4 drops the master device checks which are unnecessary because the ops are taken from the master device itself so it can't be different. ==================== Acked-by: -
Nikolay Aleksandrov authored
When ndo_add|del_slave ops are used, they're taken from the respective master device's netdev ops, so if the master device is a VRF only then the VRF ops will get called thus no need to check the type of the master. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Nikolay Aleksandrov authored
We can simplify do_vrf_add_slave by moving vrf_insert_slave in the end of the enslaving and thus eliminate an error goto label. It always succeeds and isn't needed before that anyway. Signed-off-by:
-
Nikolay Aleksandrov authored
The upper/lower functions already check for duplicate slaves so no need to do it again. Signed-off-by:
-
Nikolay Aleksandrov authored
It's pointless to panic on cache create failure when that case is handled and even more so since it's not a kernel-wide fatal problem so don't panic. Signed-off-by:
-
Nikolay Aleksandrov authored
Currently whenever a packet different from ETH_P_IP is sent through the VRF device it is leaked so plug the leaks and properly drop these packets. Signed-off-by:
-
Nikolay Aleksandrov authored
While running net-next I hit this: [ 634.073119] =============================== [ 634.073150] [ INFO: suspicious RCU usage. ] [ 634.073182] 4.2.0-rc6+ #45 Not tainted [ 634.073213] ------------------------------- [ 634.073244] include/net/vrf.h:38 suspicious rcu_dereference_check() usage! [ 634.073274] other info that might help us debug this: [ 634.073307] rcu_scheduler_active = 1, debug_locks = 1 [ 634.073338] 2 locks held by swapper/0/0: [ 634.073369] #0: (((&n->timer))){+.-...}, at: [<ffffffff8112bc35>] call_timer_fn+0x5/0x480 [ 634.073412] #1: (slock-AF_INET){+.-...}, at: [<ffffffff8174f0f5>] icmp_send+0x155/0x5f0 [ 634.073450] stack backtrace: [ 634.073483] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.2.0-rc6+ #45 [ 634.073514] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 634.073545] 0000000000000000 0593ba8242d9ace4 ffff88002fc03b48 ffffffff81803f1b [ 634.073612] 0000000000000000 ffffffff81e12500 ffff88002fc03b78 ffffffff811003c5 [ 634.073642] 0000000000000000 ffff88002ec4e600 ffffffff81f00f80 ffff88002fc03cf0 [ 634.073669] Call Trace: [ 634.073694] <IRQ> [<ffffffff81803f1b>] dump_stack+0x4c/0x65 [ 634.073728] [<ffffffff811003c5>] lockdep_rcu_suspicious+0xc5/0x100 [ 634.073763] [<ffffffff8174eb56>] icmp_route_lookup+0x176/0x5c0 [ 634.073793] [<ffffffff8174f2fb>] ? icmp_send+0x35b/0x5f0 [ 634.073818] [<ffffffff8174f274>] ? icmp_send+0x2d4/0x5f0 [ 634.073844] [<ffffffff8174f3ce>] icmp_send+0x42e/0x5f0 [ 634.073873] [<ffffffff8170b662>] ipv4_link_failure+0x22/0xa0 [ 634.073899] [<ffffffff8174bdda>] arp_error_report+0x3a/0x80 [ 634.073926] [<ffffffff816d6100>] ? neigh_lookup+0x2c0/0x2c0 [ 634.073952] [<ffffffff816d396e>] neigh_invalidate+0x8e/0x110 [ 634.073984] [<ffffffff816d62ae>] neigh_timer_handler+0x1ae/0x290 [ 634.074013] [<ffffffff816d6100>] ? neigh_lookup+0x2c0/0x2c0 [ 634.074013] [<ffffffff8112bce3>] call_timer_fn+0xb3/0x480 [ 634.074013] [<ffffffff8112bc35>] ? call_timer_fn+0x5/0x480 [ 634.074013] [<ffffffff816d6100>] ? neigh_lookup+0x2c0/0x2c0 [ 634.074013] [<ffffffff8112c2bc>] run_timer_softirq+0x20c/0x430 [ 634.074013] [<ffffffff810af50e>] __do_softirq+0xde/0x630 [ 634.074013] [<ffffffff810afc97>] irq_exit+0x117/0x120 [ 634.074013] [<ffffffff81810976>] smp_apic_timer_interrupt+0x46/0x60 [ 634.074013] [<ffffffff8180e950>] apic_timer_interrupt+0x70/0x80 [ 634.074013] <EOI> [<ffffffff8106b9d6>] ? native_safe_halt+0x6/0x10 [ 634.074013] [<ffffffff81101d8d>] ? trace_hardirqs_on+0xd/0x10 [ 634.074013] [<ffffffff81027d43>] default_idle+0x23/0x200 [ 634.074013] [<ffffffff8102852f>] arch_cpu_idle+0xf/0x20 [ 634.074013] [<ffffffff810f89ba>] default_idle_call+0x2a/0x40 [ 634.074013] [<ffffffff810f8dcc>] cpu_startup_entry+0x39c/0x4c0 [ 634.074013] [<ffffffff817f9cad>] rest_init+0x13d/0x150 [ 634.074013] [<ffffffff81f69038>] start_kernel+0x4a8/0x4c9 [ 634.074013] [<ffffffff81f68120>] ? early_idt_handler_array+0x120/0x120 [ 634.074013] [<ffffffff81f68339>] x86_64_start_reservations+0x2a/0x2c [ 634.074013] [<ffffffff81f68485>] x86_64_start_kernel+0x14a/0x16d It would seem vrf_master_ifindex_rcu() can be called without RCU held in other contexts as well so introduce a new helper which acquires rcu and returns the ifindex. Also add curly braces around both the "if" and "else" parts as per the style guide. Signed-off-by: -
Ying Xue authored
When CONFIG_LWTUNNEL config is not enabled, the lwtstate_free() is not declared in lwtunnel.h at all. However, even in this case, the function is still referenced in fib_semantics.c so that there appears the following sparse warnings: net/ipv4/fib_semantics.c:553:17: error: undefined identifier 'lwtstate_free' CC net/ipv4/fib_semantics.o net/ipv4/fib_semantics.c: In function ‘fib_encap_match’: net/ipv4/fib_semantics.c:553:3: error: implicit declaration of function ‘lwtstate_free’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[1]: *** [net/ipv4/fib_semantics.o] Error 1 make: *** [net/ipv4/fib_semantics.o] Error 2 To eliminate the error, we define an empty function for lwtstate_free() in lwtunnel.h when CONFIG_LWTUNNEL is disabled. Fixes: df383e62 ("lwtunnel: fix memory leak") Cc: Jiri Benc <jbenc@redhat.com> Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
- 19 Aug, 2015 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-08-18 This series contains updates to igb, e100, e1000e and ixgbe. Shota Suzuki provides a fix for a possible overflow in igb_set_interrupt_capability() which leads to an oops. When changing the number of queues by "ethtool -L", set IGB_FLAG_QUEUE_PAIRS in the same manner as when initializing the igb driver. Vasily Averin provides a fix for a missing rtnl_unlock() for when we error out due to not being able to allocate memory for our queues. Stefan Assman provides a couple of fixes for igb/igbvf. First changes the igb driver in probe to simply call igb_enable_sriov() instead of igb_sriov_reinit() since we are starting from scratch. Then in igbvf, fix the driver where it does not clear the buffer_info->dma in all cases after calling dma_unmap_single(), which was found by changing the MTU twice. Richard Cochran implements the periodic output function using the programmable clock outputs available in i210 when possible, falling back to the target time for longer periods. Todd adds support for the Marvell PHY 1512 which is required for i354 devices. Then updates igb to make sure SR-IOV init uses the correct number of queues, since recent changes could result in the PF holding onto all of the queues. Alex Williamson provides a fix in the case where a guest OS does not support hot-unplug, so disable SR-IOV prior to unregister_netdev() to avoid the problem. Jia-Ju Bai provides several patches, first knocks some collecting dust off an old e100 driver to add a check to avoid a null pointer dereference. Then cleans up a possible resource leak by releasing the skb buffer allocated when the e100_xmit_prepare() runs into an issue in the DMA mapping. In igb, add a missing rtnl_unlock() for when we error out due to igb_sriov_reinit() in the igb_init_interrupt_scheme(). Provides a e1000e fix, based on suggestions from Alex Duyck to move head/tail register writing to e1000_configure_tx/rx() to avoid a possible null pointer dereference (similar to igb driver). Lastly, fix a possible memory leak in igb_probe(), where the memory shadow_vfta allocated by kcalloc in igb_sw_init() is not freed. Mark simplifies port-specific macros for ixgbe by eliminating explicit comparisons with 0 and enclose formal parameters in parens to eliminate the risk of an operator precedence issue. ==================== Signed-off-by: -
David S. Miller authored
Nikolay Aleksandrov says: ==================== vrf: a few simplifications and cleanups These patches remove some unnecessary checks (patches 3, 4), unnecessary num_slaves member and refcnt manipulations which are already done by the upper functions. ==================== Acked-by:
-
Nikolay Aleksandrov authored
We can drop the check because if vrf_ptr is present then we must have the vrf device as a master and since we're running with rtnl it can't go away. Signed-off-by:
-
Nikolay Aleksandrov authored
dstats and rth are always present because we fail the device registration if they can't be allocated in vrf_init() (ndo_init) so drop the unnecessary checks. Signed-off-by:
-
Nikolay Aleksandrov authored
slave_queue has a num_slaves member which is unused, drop it. Signed-off-by:
-
Nikolay Aleksandrov authored
netdev_master_upper_dev_link/unlink already do a dev_hold/put on the devices being linked, so no need to take another reference. Signed-off-by:
-
Andrew Schwartzmeyer authored
Passes static analysis by Smatch. Signed-off-by:
Andrew Schwartzmeyer <andschwa@microsoft.com> Signed-off-by:
-
Jiri Benc authored
Currently, two routes going through the same tunnel interface are considered the same even when they are routed to a different host after encapsulation. This causes all routes added after the first one to have incorrect encapsulation parameters. This is nicely visible by doing: # ip r a 192.168.1.2/32 dev vxlan0 tunnel dst 10.0.0.2 # ip r a 192.168.1.3/32 dev vxlan0 tunnel dst 10.0.0.3 # ip r [...] 192.168.1.2/32 tunnel id 0 src 0.0.0.0 dst 10.0.0.2 [...] 192.168.1.3/32 tunnel id 0 src 0.0.0.0 dst 10.0.0.2 [...] Implement the missing comparison function. Fixes: 3093fbe7 ("route: Per route IP tunnel metadata via lightweight tunnel") Signed-off-by:
-
Jiri Benc authored
The built lwtunnel_state struct has to be freed after comparison. Fixes: 571e7226 ("ipv4: support for fib route lwtunnel encap attributes") Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Dan Carpenter authored
You can't use kstrtoul() with an int or it causes memory corruption. Also j should be unsigned or we have underflow bugs. I considered changing "j" to unsigned long but everything fits in a u32. Fixes: 8e3d04fd ('cxgb4: Add MPS tracing support') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 18 Aug, 2015 6 commits
-
-
David S. Miller authored
drivers/net/built-in.o: In function `.vnic_wq_devcmd2_alloc': (.text+0x49fe40): multiple definition of `.vnic_wq_devcmd2_alloc' drivers/scsi/built-in.o:(.text+0xb4318): first defined here drivers/net/built-in.o:(.opd+0x2af00): multiple definition of `vnic_wq_devcmd2_alloc' drivers/scsi/built-in.o:(.opd+0xad70): first defined here drivers/net/built-in.o: In function `.vnic_wq_init_start': (.text+0x49f9c0): multiple definition of `.vnic_wq_init_start' drivers/scsi/built-in.o:(.text+0xb3b58): first defined here drivers/net/built-in.o:(.opd+0x2ae88): multiple definition of `vnic_wq_init_start' drivers/scsi/built-in.o:(.opd+0xace0): first defined here Rename these to 'enic_*' to avoid the conflict with the functiosn of the same name in the snic scsi driver. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Rajesh Borundia authored
Latest FW submission added some vxlan offload capabilities to our device. This patch adds the ability to connect to the vxlan NDOs and configure the UDP port associated with it in the HW. The device would now be capable of performing RSS according to the inner headers of the vxlan packets. Signed-off-by:
Rajesh Borundia <Rajesh.Borundia@qlogic.com> Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== D in DSA patches The D in DSA is distributed, meaning multiple switches can be connected together. Currently no mainline system does this, and so the code is broken. This patchset contains two fixes, and a small helper. With three of more switches, the current device tree binding is not sufficient to express the routing between the switches. The first patch extends the binding, in a backwards compatible way, to allow a link between a switch to describe all the switches accessible over the link, not just the direct neighbor. The third patch fixes the port configuration on newer devices for links connecting switches. ==================== Signed-off-by: -
Andrew Lunn authored
Older devices only support a single DSA frame format, where as newer devices have two. Take this into account when configuring a DSA port. The port needs to be in plain old DSA mode, since this is a DSA link, where as the newer format can be used for the CPU port. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Andrew Lunn authored
Add an inline helper for determining is a port is a DSA port. Signed-off-by:
-
Andrew Lunn authored
With more than two switches in a hierarchy, it becomes necessary to describe multi-hop routes between switches. The current binding does not allow this, although the older platform_data did. Extend the link property to be a list rather than a single phandle to a remote switch. It is then possible to express that a port should be used to reach more than one switch and the switch maybe more than one hop away. Signed-off-by:
-
