- 04 Apr, 2019 40 commits
-
-
Enric Balletbo i Serra authored
Adopt the SPDX license identifier headers to ease license compliance management. Also fix MODULE_LICENSE for cros_ec_accel_legacy to match the SPDX and boiler plate license. Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Gwendal Grignou authored
Document cros_ec_sensors_read_lpc, adding an additional note to explain that this is the safe function for reading the EC data. Signed-off-by:
Gwendal Grignou <gwendal@chromium.org> Signed-off-by:
-
Guenter Roeck authored
The cros_ec sensors drivers do not call any sysfs functions or use any sysfs defines, and thus do not need to include linux/sysfs.h. Also, some cros_ec drivers include linux/delay.h and is not used. Signed-off-by:
Guenter Roeck <groeck@chromium.org> [remove linux/delay.h] Signed-off-by:
-
Linus Walleij authored
The BMP280/BME280 calibration data should also go into the entropy pool, like we do for BMP180. This just adds the temperature and pressure calibration, the humidity calibration seems like too much annoying calls to add. Cc: Tomasz Duszynski <tduszyns@gmail.com> Cc: Stefan Tatschner <stefan.tatschner@gmail.com> Cc: Andreas Klinger <ak@it-klinger.de> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Stefan Popa authored
Add documentation for optional use of external clock. All devices supported by this driver can work with an external clock in sync mode. Another mode, called Pulse Per Second (PPS) is supported only by adis1649x devices. The mode is selected by using the "clock-names" property. The pin which is used as external clock input is selected by using a custom optional property called "adi,ext-clk-pin". If this field is left empty, DIO2 is assigned as default external clock input pin. Signed-off-by:
Stefan Popa <stefan.popa@analog.com> Signed-off-by:
-
Stefan Popa authored
Inertial sensor data collection and processing can be controlled by configuring one of the DIOx lines as an external clock input. This option is available for all devices supported by this driver. However, only adis1649x devices support different modes for the external clock. Sync mode is supported by all devices. In this mode, the output data rate is equal with the clock frequency divided by DEC_RATE + 1. This mode of calculation is similar with the case when the internal clock is used. Pulse Per Second (PPS) Mode, is only supported by adis1649x devices. In this mode, the output data rate is equal to the product of the external clock frequency and the scale factor in the SYNC_SCALE register. This patch uses the "clock-names" property to enable the external clock in one of the two supported modes: "sync" or "pps". This property is optional. If it is not specified, the internal clock is used. This patch also offers the option to select the DIOx line to be used as an external clock input via the custom "adi,ext-clk-pin" property. If this field is left empty, DIO2 is assigned as default external clock input pin. Each DIOx pin supports only one function at a time (data ready line selection or external clock input). Signed-off-by:
-
Jonathan Cameron authored
indio_dev->mlock is intended to protect state transitions in the core. It's scope is tightly defined. For device specific uses such as those made here, we should define a local lock allowing the scope of the lock to be defined near to what it is protecting. These mlock changes can be non obvious, but given we don't do anything other than direct for DACs, these ones are easy to do. If anyone wants to help with this particular effort it would be most welcome! Signed-off-by: -
Enrico Weigelt, metux IT consult authored
Formatting of Kconfig files doesn't look so pretty, so just take damp cloth and clean it up. Signed-off-by:
Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by:
-
Nathan Chancellor authored
When building with -Wsometimes-uninitialized, Clang warns: drivers/iio/adc/stmpe-adc.c:204:13: warning: variable 'data' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] Clang can't tell that data will never be used uninitialized because the two if statements take care of all cases. Remove the first if statement and make it the else branch of the second one so that it is apparent to Clang that all cases are covered. Link: https://github.com/ClangBuiltLinux/linux/issues/387Suggested-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
-
Nathan Chancellor authored
When building with -Wsometimes-uninitialized, Clang warns: drivers/iio/common/ssp_sensors/ssp_iio.c:95:6: warning: variable 'calculated_time' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] While it isn't wrong, this will never be a problem because iio_push_to_buffers_with_timestamp only uses calculated_time on the same condition that it is assigned (when scan_timestamp is not zero). While iio_push_to_buffers_with_timestamp is marked as inline, Clang does inlining in the optimization stage, which happens after the semantic analysis phase (plus inline is merely a hint to the compiler). Fix this by just zero initializing calculated_time. Link: https://github.com/ClangBuiltLinux/linux/issues/394Signed-off-by:
-
Sven Van Asbroeck authored
This driver's probe() uses a mix of devm_ and non-devm_ functions. This means that the remove order will not be the exact opposite of the probe order. Remove order: 1. remove() executes: iio_device_unregister iio_triggered_buffer_cleanup iio_trigger_unregister (A) 2. core frees devm resources in reverse order: free_irq iio_trigger_free iio_device_free In (A) the trigger has been unregistered, but the irq handler is still registered and active, so the trigger may still be touched via interrupt -> as3935_event_work. This is a potential use-after-unregister. Given that the delayed work is never canceled explicitly, it may run even after iio_device_free. This is a potential use-after-free. Solution: convert all probe functions to their devm_ equivalents. Add a devm callback, called by the core on remove right after irq_free, which explicitly cancels the delayed work. This will guarantee that all resources are freed in the correct order. As an added bonus, some boilerplate code can be removed. Signed-off-by:
Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by:
-
Anderson Reis authored
Change dev_err message on line 215 in order to inform that tia-gain-ohm is not defined and an external resistor is not specified. Signed-off-by:
Anderson Reis <andersonreisrosa@gmail.com> Signed-off-by:
Lucas Oshiro <lucasseikioshiro@gmail.com> Signed-off-by:
-
Anderson Reis authored
Invert if statement arms in line 214, in order to make the code cleaner, solve these checkpatch.pl CHECKs: - lmp9100.c:214: CHECK: braces {} should be used on all arms of this statement - lmp9100.c:216: CHECK: Unbalanced braces around else statement Signed-off-by: -
Anderson Reis authored
Break the line 258 in order fit the line width on 80 characters. Remove the blank line 279, as the line before is also a blank line. Solve these checkpath.el WARNING and CHECK: - lmp91000.c:258: WARNING: line over 80 characters - lmp91000.c:279: CHECK: Please don't use multiple blank lines Signed-off-by:
-
Lucas Oshiro authored
Remove unnecessary parentheses on line 116. Signed-off-by:
-
Justin Chen authored
The ADS79XX has GPIO pins that can be used. Add support for the GPIO pins using the GPIO chip framework. Signed-off-by:
Justin Chen <justinpopo6@gmail.com> Reviewed-by:
-
Kangjie Lu authored
devm_iio_trigger_alloc may fail and return NULL. The fix returns ENOMEM when it fails. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
-
Sean Nyekjaer authored
Update the module author to the current email address Signed-off-by:
Sean Nyekjaer <sean@geanix.com> Signed-off-by:
-
Sean Nyekjaer authored
Update the module author to the current email address. Signed-off-by:
-
Robert Yang authored
Add device tree support for kxcjk-1013 accelerometer sensors. Signed-off-by:
Robert Yang <decatf@gmail.com> Signed-off-by:
-
Robert Yang authored
Document device tree bindings for Kionix KXCJK-1013 Accelerometer driver. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Robert Yang authored
Kionix manufactured MEMs sensors. There are Kionix acceleromoter sensor drivers which can be used with device tree. Signed-off-by:
-
Neil Armstrong authored
Add the SAR ADC driver for the Amlogic Meson-G12A SoC. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Neil Armstrong authored
Update the documentation to explicitly support the Meson-G12A SoC. Signed-off-by:
-
Sean Nyekjaer authored
As I'll no longer be working with Prevas, add a mailmap entry so any mail directed towards me reaches the appropriate mailbox. Signed-off-by:
-
Andy Shevchenko authored
Switch to bitmap_zalloc() to show clearly what we are allocating. Besides that it returns pointer of bitmap type instead of opaque void *. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Gustavo A. R. Silva authored
Refactor some code in order to fix both the technical implementation and the following warnings: drivers/iio/accel/cros_ec_accel_legacy.c: In function ‘cros_ec_accel_legacy_probe’: drivers/iio/accel/cros_ec_accel_legacy.c:387:36: warning: this statement may fall through [-Wimplicit-fallthrough=] ec_accel_channels[X].scan_index = Y; ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~ drivers/iio/accel/cros_ec_accel_legacy.c:388:3: note: here case Y: ^~~~ drivers/iio/accel/cros_ec_accel_legacy.c:389:36: warning: this statement may fall through [-Wimplicit-fallthrough=] ec_accel_channels[Y].scan_index = X; ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~ drivers/iio/accel/cros_ec_accel_legacy.c:390:3: note: here case Z: ^~~~ Notice that neither the for loop nor the switch statement is needed. Also, "state->sign[Y] = 1" should be unconditional. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by:
Kees Cook <keescook@chromium.org> Acked-by:
-
Colin Ian King authored
The check that variable val is less than zero is redundant since val is an unsigned int and hence can never be less than zero. Remove it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Lorenzo Bianconi authored
Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
Add support to STM ASM330LHH 6-axis (acc + gyro) Mems sensor https://www.st.com/resource/en/datasheet/asm330lhh.pdfTested-by:
Mario Tesi <mario.tesi@st.com> Signed-off-by:
-
H. Nikolaus Schaller authored
- use temporary variable in get_mount_matrix() - remove , after { } Signed-off-by:H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by:
-
H. Nikolaus Schaller authored
- use temporary variable in get_mount_matrix() - remove , after { } Signed-off-by: -
H. Nikolaus Schaller authored
This patch allows to read a mount-matrix device tree property and report to user-space or in-kernel iio clients. Signed-off-by:
-
H. Nikolaus Schaller authored
This patch allows to read a mount-matrix device tree property and report to user-space or in-kernel iio clients. Signed-off-by:
-
H. Nikolaus Schaller authored
This patch allows to read a mount-matrix device tree property and report to user-space or in-kernel iio clients. Signed-off-by:
-
H. Nikolaus Schaller authored
This patch allows to read a mount-matrix device tree property and report to user-space or in-kernel iio clients. Signed-off-by:
-
H. Nikolaus Schaller authored
This patch allows to read a mount-matrix device tree property and report to user-space or in-kernel iio clients. Signed-off-by:
-
H. Nikolaus Schaller authored
This patch allows to read a mount-matrix device tree property and report to user-space or in-kernel iio clients. Signed-off-by:
-
Andy Shevchenko authored
Currently mount matrix is allowed in Device Tree, though there is no technical issue to extend it to support ACPI. Convert the function to use device_property_read_string_array() and thus allow to read mount matrix from ACPI if available. Example of use in _DSD method: Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mount-matrix", Package() { "1", "0", "0", "0", "0.866", "0.5", "0", "-0.5", "0.866", } }, } }) At the same time drop the "of" prefix from its name and convert current users. No functional change intended. Signed-off-by: -
Bárbara Fernandes authored
Solves checkpath.pl's message: CHECK: Comparison to NULL could be written "!indio_dev" Signed-off-by:
Bárbara Fernandes <barbara.fernandes@usp.br> Signed-off-by:
-
