- 01 Feb, 2020 2 commits
-
-
Daniele Ceraolo Spurio authored
Now that intel_engine_apply_workarounds is called on all gens, we can use the engine workaround lists for pre-gen8 workarounds as well to be consistent in the way we handle and dump the WAs. v2: Ignore the sanity check of MI_MODE on Broadwater, for whatever reason it is not sticking. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Chris Wilson authored
A masked register does not need rmw to update, and it is best not to use such a sequence. Reported-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200131235035.3522102-1-chris@chris-wilson.co.uk
-
- 31 Jan, 2020 27 commits
-
-
Daniele Ceraolo Spurio authored
The workarounds are a common "feature" across gens and submission mechanisms and we already call the other WA related functions from common engine ones (<setup/cleanup>_common), so it makes sense to do the same with WA application. Medium-term, This will help us reduce the duplication once the GuC resume function is added, but short term it will also allow us to use the workaround lists for pre-gen8 engine workarounds. Signed-off-by:
-
Michal Wajdeczko authored
We already have guc_is_running function, but it only reflects firmware status, while to fully use GuC we need to know if we've already established communication with it. v2: also s/intel_guc_is_running/intel_guc_is_fw_running (Chris) Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Chris Wilson authored
If the heartbeat fires in the middle of the preempt-hang test, it consumes our forced hang disrupting the test. Reported-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200131130319.2998318-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Since PIN_GLOBAL is no longer guaranteed to be synchronous, we must not forget to include a wait-for-vma prior to execution. Signed-off-by:
-
Chris Wilson authored
In the rare cases where we are using the global GGTT for execution in the selftests, we have marked them with PIN_USER knowing that they will be bound as PIN_GLOBAL as well. However, we need to catch the extra flag in deciding to use the async worker for such binds as well. Signed-off-by:
-
Chris Wilson authored
To enable non-persistent contexts, we require a means of cancelling any inflight work from that context. This is first done "gracefully" by using preemption to kick the active context off the engine, and then forcefully by resetting the engine if it is active. If we are unable to reset the engine to remove hostile userspace, we should not allow userspace to opt into using non-persistent contexts. If the per-engine reset fails, we still do a full GPU reset, but that is rare and usually indicative of much deeper issues. The damage is already done. However, the goal of the interface to allow long running compute jobs without causing collateral damage elsewhere, and if we are unable to support that we should make that known by not providing the interface (and falsely pretending we can). Fixes: a0e04715 ("drm/i915/gem: Make context persistence optional") Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200130164553.1937718-1-chris@chris-wilson.co.uk
-
Ville Syrjälä authored
Let's add a copy of the active_pipes bitmask into the cdclk_state. While this is duplicating a bit of information we may already have elsewhere, I think it's worth it to decopule the cdclk stuff from whatever else wants to use that bitmask. Also we want to get rid of all the old ad-hoc global state which is what the current bitmask is, so this removes one obstacle. The one extra thing we have to remember is write locking the cdclk state whenever the bitmask changes. Signed-off-by:
Imre Deak <imre.deak@intel.com>
-
Ville Syrjälä authored
Let's convert cdclk_state to be a proper global state. That allows us to use the regular atomic old vs. new state accessor, hopefully making the code less confusing. We do have to deal with a few more error cases in case the cdclk state duplication fails. But so be it. v2: Fix new plane min_cdclk vs. old crtc min_cdclk check Signed-off-by:
-
Ville Syrjälä authored
Extract a small helper to compute the active pipes bitmask based on the old bitmask + the crtcs in the atomic state. I want to decouple the cdclk state entirely from the current global state so I want to track the active pipes also inside the (to be introduced) full cdclk state. Signed-off-by:
-
Ville Syrjälä authored
Now that we have the more formal global state thing let's use if for memory bandwidth tracking. No real difference to the current private object usage since we already tried to avoid taking the single serializing lock needlessly. But since we're going to roll the global state out to more things probably a good idea to unify the approaches a bit. Signed-off-by:
-
Ville Syrjälä authored
Our current global state handling is pretty ad-hoc. Let's try to make it better by imitating the standard drm core private object approach. The reason why we don't want to directly use the private objects is locking; Each private object has its own lock so if we introduce any global private objects we get serialized by that single lock across all pipes. The global state apporoach instead uses a read/write lock type of approach where each individual crtc lock counts as a read lock, and grabbing all the crtc locks allows one write access. Signed-off-by:
-
Ville Syrjälä authored
Move intel_atomic_state_free() next to its counterpart. Signed-off-by:
-
Ville Syrjälä authored
Give the cdclk init/uninit functions a _hw suffix to make it clear they are about initializing the actual hardware. I'll be wanting to to add a intel_cdclk_init() which is purely initializing software structures. Signed-off-by:
-
Ville Syrjälä authored
To make life less confusing let's swap() the entire cdclk state rather than swapping some parts, copying other parts, and leaving the rest just as is. Signed-off-by:
-
Ville Syrjälä authored
Use the same structure to store the cdclk state in both intel_atomic_state and dev_priv. First step towards proper old vs. new cdclk states. Signed-off-by:
José Roberto de Souza <jose.souza@intel.com>
-
Ville Syrjälä authored
Move all the old vs. new state shenanigans into intel_set_cdclk_{pre,post}_plane_update() so that the caller doesn't need to know any of it. Signed-off-by: -
Ville Syrjälä authored
I want to have a higher level cdclk state object so let's rename the current lower level thing to cdclk_config (because I lack imagination). Signed-off-by:
-
Ville Syrjälä authored
intel_cdclk_needs_cd2x_update() is named rather confusingly. We don't have to do a cd2x update, rather we are allowed to do one (as opposed to a full PLL reprogramming with its heavy handed modeset). So let's rename the function to intel_cdclk_can_cd2x_update(). Signed-off-by:
-
Ville Syrjälä authored
Move the min_cdclk[] and min_voltage_level[] arrays under the rest of the cdclk state. And while at it provide a simple helper (intel_cdclk_clear_state()) to clear the state during the ww_mutex backoff dance. Signed-off-by:
-
Ville Syrjälä authored
Move the initial setup of state->{cdclk,min_cdclk[],min_voltage_level[]} into intel_modeset_calc_cdclk(), and we'll move the counterparts into intel_cdclk_swap_state(). This encapsulates the cdclk state much better. Signed-off-by: -
Ville Syrjälä authored
The dirty_pipes bitmask is now unused. Get rid of it. Reviewed-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by:
-
Ville Syrjälä authored
The linetime watermarks really have very little in common with the plane watermarks. It looks to be cleaner to simply track them in the crtc_state and program them from the normal modeset/fastset paths. The only dark cloud comes from the fact that the register is still supposedly single buffered. So in theory it might still need some form of two stage programming. Note that even though HSW/BDWhave two stage programming we never computed any special intermediate values for the linetime watermarks, and on SKL+ we don't even have the two stage stuff plugged in since everything else is double buffered. So let's assume it's all fine and continue doing what we've been doing. Actually on HSW/BDW the value should not even change without a full modeset since it doesn't account for pfit downscaling. Thus only fastboot might be affected. But on SKL+ the pfit scaling factor is take into consideration so the value may change during any fastset. As a bonus we'll plug this thing into the state checker/dump now. v2: Rebase due to bigjoiner prep v2: Only compute ips linetime for IPS capable pipes. Bspec says the register values is ignored for other pipes, but in fact it can't even be written so the state checker becomes unhappy if we don't compute it as zero. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: -
Ville Syrjälä authored
Let's store the normal and IPS linetime watermarks individually, and while at it we'll pimp the register definitions as well. v2: Deal with gvt Reviewed-by:
-
Jani Nikula authored
intel_dp_set_m_n() has a clear place in the DDI DP specific pre-enable hook. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by:
Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200128162850.8660-3-jani.nikula@intel.com
-
Vandita Kulkarni authored
Enable the dsi transcoder, panel and backlight as part of encoder->enable and not encoder->pre_enable. We need to have pipe src size, among other things, set before enabling the transcoder, to avoid FIFO underruns and possibly other issues. v2 by Jani: - Rebase on the crtc enable sequence update Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
To allow better flexibility for encoder specific code, push intel_enable_pipe(), lpt_pch_enable() and intel_crtc_vblank_on() down to the encoders from hsw_crtc_enable(). There's slight duplication, but also more clarity with the reduced conditional statements. Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
The debugfs is not the place to print duplicated info about VBT data. Reviewed-by:
-
- 30 Jan, 2020 11 commits
-
-
Chris Wilson authored
On Braswell and Broxton (also known as Valleyview and Apollolake), we need to serialise updates of the GGTT using the big stop_machine() hammer. This has the side effect of appearing to lockdep as a possible reclaim (since it uses the cpuhp mutex and that is tainted by per-cpu allocations). However, we want to use vm->mutex (including ggtt->mutex) from within the shrinker and so must avoid such possible taints. For this purpose, we introduced the asynchronous vma binding and we can apply it to the PIN_GLOBAL so long as take care to add the necessary waits for the worker afterwards. Closes: https://gitlab.freedesktop.org/drm/intel/issues/211Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200130181710.2030251-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
The i915_ggtt now sits beneath gt/ outside of the auspices of gem/ and should be given a fresh name to reflect that. We also want to give it a name that reflects its role in the system suspend/resume, with the intention of pulling together all the GGTT operations (e.g. restoring the fence registers once they are pulled under gt/intel_ggtt_detiler.c) Signed-off-by:
-
Chris Wilson authored
Make sure we hold the rcu lock as we acquire the rcu protected reference of the object when looking it up from the associated mmap vma. Closes: https://gitlab.freedesktop.org/drm/intel/issues/1083 Fixes: cc662126 ("drm/i915: Introduce DRM_I915_GEM_MMAP_OFFSET") Signed-off-by:
-
Chris Wilson authored
Avoid releasing the same stolen nodes causing a use-after-free and/or explosions as the self-checks fail, as __intel_fbc_cleanup_cfb() may be called multiple times during module unload. Signed-off-by:
-
Chris Wilson authored
VT'd on Broxton and on Braswell require serialisation of GGTT updates. However, it seems to only be required for insertion, so drop the complication and heavyweight stop_machine() for clears. The range will be serialised again before use. Signed-off-by:
-
Wambui Karuga authored
Manually convert the remaining instance of the printk based drm logging macros to the struct drm_device based logging macros in i915/gt/intel_ring_submission.c Signed-off-by:
Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by:
-
Wambui Karuga authored
Convert remaining instances of the printk based logging macros in i915/gt/intel_gt to the struct drm_device based logging macros. Signed-off-by:
-
Wambui Karuga authored
Conversion of the remaining printk based drm logging macros to the new struct drm_device based logging macros in i915/gt/intel_engine_cs.c. Signed-off-by:
-
Wambui Karuga authored
This converts most instances of the printk based drm logging macros in i915/gt/intel_resect.c to the new struct drm_based logging macros. Signed-off-by:
-
Wambui Karuga authored
Manual conversion of the printk based logging macros to the new struct drm_based logging macros in drm/i915/gt/intel_ggtt.c. Also includes extracting the struct drm_i915_private device from various intel types to use in the new macros. Signed-off-by:
-
José Roberto de Souza authored
Only the first and the last nodes were being added to ref->preallocated_barriers. Renaming variables to make it more easy to read. Fixes: 84135022 ("drm/i915/gt: Drop mutex serialisation between context pin/unpin") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
