Searching for PPC_EFIKA results in a segmentation fault, and it's
because get_symbol_prop() returns NULL.

In this case CONFIG_PPC_EFIKA is defined in arch/powerpc/platforms/
52xx/Kconfig, so it won't be parsed if ARCH!=PPC, but menuconfig knows
this symbol when it parses sound/soc/fsl/Kconfig:

    config SND_MPC52xx_SOC_EFIKA
        tristate "SoC AC97 Audio support for bbplan Efika and STAC9766"
        depends on PPC_EFIKA

This bug was introduced by commit bcdedcc1 ("menuconfig: print more
info for symbol without prompts").
Reported-and-tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Li Zefan <lizefan@huawei.com>
Tested-by: Libo Chen <libo.chen@huawei.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A scheduling while atomic bug was introduced recently (by commit
ce43a216: "e1000e: cleanup USLEEP_RANGE checkpatch checks").

Revert the particular instance of usleep_range() which causes the bug.
Reported-by: Maarten Lankhorst <m.b.lankhorst@gmail.com>
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:
 "Just a small pile of fixes"

 1) Fix race conditions in IP fragmentation LRU list handling, from
    Konstantin Khlebnikov.

 2) vfree() is no longer verboten in interrupts, so deferring is
    pointless, from Al Viro.

 3) Conversion from mutex to semaphore in netpoll left trylock test
    inverted, caught by Dan Carpenter.

 4) 3c59x uses wrong base address when releasing regions, from Sergei
    Shtylyov.

 5) Bounds checking in TIPC from Dan Carpenter.

 6) Fastopen cookies should not be expired as aggressively as other TCP
    metrics.  From Eric Dumazet.

 7) Fix retrieval of MAC address in ibmveth, from Ben Herrenschmidt.

 8) Don't use "u16" in virtio user headers, from Stephen Hemminger

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  tipc: potential divide by zero in tipc_link_recv_fragment()
  tipc: add a bounds check in link_recv_changeover_msg()
  net/usb: new driver for RTL8152
  3c59x: fix freeing nonexistent resource on driver unload
  netpoll: inverted down_trylock() test
  rps_dev_flow_table_release(): no need to delay vfree()
  fib_trie: no need to delay vfree()
  net: frag, fix race conditions in LRU list maintenance
  tcp: do not expire TCP fastopen cookies
  net/eth/ibmveth: Fixup retrieval of MAC address
  virtio: don't expose u16 in userspace api

Pull LED subsystem updates from Bryan Wu:
 - move LED trigger drivers into a new directory
 - lp55xx common driver updates
 - other led drivers updates and bug fixing

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: leds-asic3: switch to using SIMPLE_DEV_PM_OPS
  leds: leds-bd2802: add CONFIG_PM_SLEEP to suspend/resume functions
  leds: lp55xx: configure the clock detection
  leds: lp55xx: use common clock framework when external clock is used
  leds: leds-ns2: fix oops at module removal
  leds: leds-pwm: Defer led_pwm_set() if PWM can sleep
  leds: lp55xx: fix the sysfs read operation
  leds: lm355x, lm3642: support camera LED triggers for flash and torch
  leds: add camera LED triggers
  leds: trigger: use inline functions instead of macros
  leds: tca6507: Use of_match_ptr() macro
  leds: wm8350: Complain if we fail to reenable DCDC
  leds: renesas: set gpio_request_one() flags param correctly
  leds: leds-ns2: set devm_gpio_request_one() flags param correctly
  leds: leds-lt3593: set devm_gpio_request_one() flags param correctly
  leds: leds-bd2802: remove erroneous __exit annotation
  leds: atmel-pwm: remove erroneous __exit annotation
  leds: move LED trigger drivers into new subdirectory
  leds: add new LP5562 LED driver

Pull GPIO changes from Grant Likely:
 "The usual selection of bug fixes and driver updates for GPIO.  Nothing
  really stands out except the addition of the GRGPIO driver and some
  enhacements to ACPI support"

I'm pulling this despite the earlier mess.  Let's hope it compiles these
days.

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: (46 commits)
  gpio: grgpio: Add irq support
  gpio: grgpio: Add device driver for GRGPIO cores
  gpiolib-acpi: introduce acpi_get_gpio_by_index() helper
  GPIO: gpio-generic: remove kfree() from bgpio_remove call
  gpio / ACPI: Handle ACPI events in accordance with the spec
  gpio: lpc32xx: Fix off-by-one valid range checking for bank
  gpio: mcp23s08: convert driver to DT
  gpio/omap: force restore if context loss is not detectable
  gpio/omap: optimise interrupt service routine
  gpio/omap: remove extra context restores in *_runtime_resume()
  gpio/omap: free irq domain in probe() failure paths
  gpio: gpio-generic: Add 16 and 32 bit big endian byte order support
  gpio: samsung: Add terminating entry for exynos_pinctrl_ids
  gpio: mvebu: add dbg_show function
  MAX7301 GPIO: Do not force SPI speed when using OF Platform
  gpio: gpio-tps65910.c: fix checkpatch error
  gpio: gpio-timberdale.c: fix checkpatch error
  gpio: gpio-tc3589x.c: fix checkpatch errors
  gpio: gpio-stp-xway.c: fix checkpatch error
  gpio: gpio-sch.c: fix checkpatch error
  ...

Pull pwm changes from Thierry Reding:
 "Nothing very exciting this time around.  A couple of bug fixes and a
  lot of cleanup across the board.  The DaVinci 8xx family of SoCs now
  use the same driver as the AM33xx family.

  Many thanks to Axel Lin and Jingoo Han who have done a great job
  fixing various bugs and inconsistencies."

* tag 'for-3.10-rc1' of git://gitorious.org/linux-pwm/linux-pwm: (27 commits)
  pwm: lpc32xx: Don't change PWM_ENABLE bit in lpc32xx_pwm_config
  pwm: lpc32xx: Properly set PWM_ENABLE bit in lpc32xx_pwm_[enable|disable]
  pwm: Constify OF match tables
  pwm: pwm-tiehrpwm: Update device-tree binding document
  pwm: pwm-tiecap: Update device-tree binding document
  pwm: puv3: Remove unused enabled filed from struct puv3_pwm_chip
  pwm: pxa: Remove PWM_ID_BASE macro
  pwm: spear: Remove unused *dev from struct spear_pwm_chip
  pwm: mxs: Remove unused *dev from struct mxs_pwm_chip
  pwm: twl: Return proper error if twl6030_pwm_enable() fails
  pwm: pxa: Remove clk_enabled field from struct pxa_pwm_chip
  pwm: imx: Remove enabled field from struct imx_chip
  pwm: twl: Add .owner to struct pwm_ops
  pwm: twl-led: Add .owner to struct pwm_ops
  pwm: atmel-tcb: Add .owner to struct pwm_ops
  pwm: ab8500: Add .owner to struct pwm_ops
  pwm: spear: Fix checking return value of clk_enable() and clk_prepare()
  pwm: tiehrpwm: Staticize non-exported symbols
  pwm: tiecap: Staticize non-exported symbols
  pwm: ab8500: Fix trivial typo in dev_err message
  ...

Pull IOMMU updates from Joerg Roedel:
 "The updates are mostly about the x86 IOMMUs this time.

  Exceptions are the groundwork for the PAMU IOMMU from Freescale (for a
  PPC platform) and an extension to the IOMMU group interface.

  On the x86 side this includes a workaround for VT-d to disable
  interrupt remapping on broken chipsets.  On the AMD-Vi side the most
  important new feature is a kernel command-line interface to override
  broken information in IVRS ACPI tables and get interrupt remapping
  working this way.

  Besides that there are small fixes all over the place."

* tag 'iommu-updates-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (24 commits)
  iommu/tegra: Fix printk formats for dma_addr_t
  iommu: Add a function to find an iommu group by id
  iommu/vt-d: Remove warning for HPET scope type
  iommu: Move swap_pci_ref function to drivers/iommu/pci.h.
  iommu/vt-d: Disable translation if already enabled
  iommu/amd: fix error return code in early_amd_iommu_init()
  iommu/AMD: Per-thread IOMMU Interrupt Handling
  iommu: Include linux/err.h
  iommu/amd: Workaround for ERBT1312
  iommu/amd: Document ivrs_ioapic and ivrs_hpet parameters
  iommu/amd: Don't report firmware bugs with cmd-line ivrs overrides
  iommu/amd: Add ioapic and hpet ivrs override
  iommu/amd: Add early maps for ioapic and hpet
  iommu/amd: Extend IVRS special device data structure
  iommu/amd: Move add_special_device() to __init
  iommu: Fix compile warnings with forward declarations
  iommu/amd: Properly initialize irq-table lock
  iommu/amd: Use AMD specific data structure for irq remapping
  iommu/amd: Remove map_sg_no_iommu()
  iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets
  ...

The worry here is that fragm_sz could be zero since it comes from
skb->data.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The bearer_id here comes from skb->data and it can be a number from 0 to
7.  The problem is that the ->links[] array has only 2 elements so I
have added a range check.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add new driver for supporting Realtek RTL8152 Based USB 2.0 Ethernet Adapters
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull Ceph changes from Alex Elder:
 "This is a big pull.

  Most of it is culmination of Alex's work to implement RBD image
  layering, which is now complete (yay!).

  There is also some work from Yan to fix i_mutex behavior surrounding
  writes in cephfs, a sync write fix, a fix for RBD images that get
  resized while they are mapped, and a few patches from me that resolve
  annoying auth warnings and fix several bugs in the ceph auth code."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (254 commits)
  rbd: fix image request leak on parent read
  libceph: use slab cache for osd client requests
  libceph: allocate ceph message data with a slab allocator
  libceph: allocate ceph messages with a slab allocator
  rbd: allocate image object names with a slab allocator
  rbd: allocate object requests with a slab allocator
  rbd: allocate name separate from obj_request
  rbd: allocate image requests with a slab allocator
  rbd: use binary search for snapshot lookup
  rbd: clear EXISTS flag if mapped snapshot disappears
  rbd: kill off the snapshot list
  rbd: define rbd_snap_size() and rbd_snap_features()
  rbd: use snap_id not index to look up snap info
  rbd: look up snapshot name in names buffer
  rbd: drop obj_request->version
  rbd: drop rbd_obj_method_sync() version parameter
  rbd: more version parameter removal
  rbd: get rid of some version parameters
  rbd: stop tracking header object version
  rbd: snap names are pointer to constant data
  ...

Pull CIFS fixes from Steve French:
 "A set of cifs cleanup fixes.

  The only big one of this set optimizes the cifs error logging,
  renaming cFYI and cERROR macros to cifs_dbg, and in the process makes
  it clearer and reduces module size."

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: small variable name cleanup
  CIFS: fix error return code in cifs_atomic_open()
  cifs: store the real expected sequence number in the mid
  cifs: on send failure, readjust server sequence number downward
  cifs: remove ENOSPC handling in smb_sendv
  [CIFS] cifs: Rename cERROR and cFYI to cifs_dbg
  fs: cifs: use kmemdup instead of kmalloc + memcpy
  cifs: replaced kmalloc + memset with kzalloc
  cifs: ignore the unc= and prefixpath= mount options

When checking if an autofs mount point is busy it isn't sufficient to
only check if it's a mount point.

For example, if the mount of an offset mountpoint in a tree is denied
for this host by its export and the dentry becomes a process working
directory the check incorrectly returns the mount as not in use at
expire.

This can happen since the default when mounting within a tree is
nostrict, which means ingnore mount fails on mounts within the tree and
continue.  The nostrict option is meant to allow mounting in this case.
Signed-off-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fixed the sparse warning:

  fs/autofs4/root.c:411:5: warning: symbol 'autofs4_d_manage' was not declared. Should it be static?"

[ Clearly it should be static as the function is declared static at the
  top of root.c.  - imk ]
Signed-off-by: Claudiu Ghioc <claudiu.ghioc@gmail.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more s390 updates from Martin Schwidefsky:
 "This is the second batch of s390 patches for the 3.10 merge window.

  Heiko improved the memory detection, this fixes kdump for large memory
  sizes.  Some kvm related memory management work, new ipldev/condev
  keywords in cio and bug fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/mem_detect: remove artificial kdump memory types
  s390/mm: add pte invalidation notifier for kvm
  s390/zcrypt: ap bus rescan problem when toggle crypto adapters on/off
  s390/memory hotplug,sclp: get rid of per memory increment usecount
  s390/memory hotplug: provide memory_block_size_bytes() function
  s390/mem_detect: limit memory detection loop to "mem=" parameter
  s390/kdump,bootmem: fix bootmem allocator bitmap size
  s390: get rid of odd global real_memory_size
  s390/kvm: Change the virtual memory mapping location for Virtio devices
  s390/zcore: calculate real memory size using own get_mem_size function
  s390/mem_detect: add DAT sanity check
  s390/mem_detect: fix lockdep irq tracing
  s390/mem_detect: move memory detection code to mm folder
  s390/zfcpdump: exploit new cio_ignore keywords
  s390/cio: add condev keyword to cio_ignore
  s390/cio: add ipldev keyword to cio_ignore
  s390/uaccess: add "fallthrough" comments

When unloading the driver that drives an EISA board, a message similar to the
following one is displayed:

Trying to free nonexistent resource <0000000000013000-000000000001301f>

Then an user is unable to reload the driver because the resource it requested in
the previous load hasn't been freed. This happens most probably due to a typo in
vortex_eisa_remove() which calls release_region() with 'dev->base_addr'  instead
of 'edev->base_addr'...
Reported-by: Matthew Whitehead <tedheadster@gmail.com>
Tested-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The return value is reversed from mutex_trylock().
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The same story as with fib_trie patch - vfree() from RCU callbacks
is legitimate now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that vfree() can be called from interrupt contexts, there's no
need to play games with schedule_work() to escape calling vfree()
from RCU callbacks.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes race between inet_frag_lru_move() and inet_frag_lru_add()
which was introduced in commit 3ef0eb0d
("net: frag, move LRU list maintenance outside of rwlock")

One cpu already added new fragment queue into hash but not into LRU.
Other cpu found it in hash and tries to move it to the end of LRU.
This leads to NULL pointer dereference inside of list_move_tail().

Another possible race condition is between inet_frag_lru_move() and
inet_frag_lru_del(): move can happens after deletion.

This patch initializes LRU list head before adding fragment into hash and
inet_frag_lru_move() doesn't touches it if it's empty.

I saw this kernel oops two times in a couple of days.

[119482.128853] BUG: unable to handle kernel NULL pointer dereference at           (null)
[119482.132693] IP: [<ffffffff812ede89>] __list_del_entry+0x29/0xd0
[119482.136456] PGD 2148f6067 PUD 215ab9067 PMD 0
[119482.140221] Oops: 0000 [#1] SMP
[119482.144008] Modules linked in: vfat msdos fat 8021q fuse nfsd auth_rpcgss nfs_acl nfs lockd sunrpc ppp_async ppp_generic bridge slhc stp llc w83627ehf hwmon_vid snd_hda_codec_hdmi snd_hda_codec_realtek kvm_amd k10temp kvm snd_hda_intel snd_hda_codec edac_core radeon snd_hwdep ath9k snd_pcm ath9k_common snd_page_alloc ath9k_hw snd_timer snd soundcore drm_kms_helper ath ttm r8169 mii
[119482.152692] CPU 3
[119482.152721] Pid: 20, comm: ksoftirqd/3 Not tainted 3.9.0-zurg-00001-g9f95269 #132 To Be Filled By O.E.M. To Be Filled By O.E.M./RS880D
[119482.161478] RIP: 0010:[<ffffffff812ede89>]  [<ffffffff812ede89>] __list_del_entry+0x29/0xd0
[119482.166004] RSP: 0018:ffff880216d5db58  EFLAGS: 00010207
[119482.170568] RAX: 0000000000000000 RBX: ffff88020882b9c0 RCX: dead000000200200
[119482.175189] RDX: 0000000000000000 RSI: 0000000000000880 RDI: ffff88020882ba00
[119482.179860] RBP: ffff880216d5db58 R08: ffffffff8155c7f0 R09: 0000000000000014
[119482.184570] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88020882ba00
[119482.189337] R13: ffffffff81c8d780 R14: ffff880204357f00 R15: 00000000000005a0
[119482.194140] FS:  00007f58124dc700(0000) GS:ffff88021fcc0000(0000) knlGS:0000000000000000
[119482.198928] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[119482.203711] CR2: 0000000000000000 CR3: 00000002155f0000 CR4: 00000000000007e0
[119482.208533] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[119482.213371] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[119482.218221] Process ksoftirqd/3 (pid: 20, threadinfo ffff880216d5c000, task ffff880216d3a9a0)
[119482.223113] Stack:
[119482.228004]  ffff880216d5dbd8 ffffffff8155dcda 0000000000000000 ffff000200000001
[119482.233038]  ffff8802153c1f00 ffff880000289440 ffff880200000014 ffff88007bc72000
[119482.238083]  00000000000079d5 ffff88007bc72f44 ffffffff00000002 ffff880204357f00
[119482.243090] Call Trace:
[119482.248009]  [<ffffffff8155dcda>] ip_defrag+0x8fa/0xd10
[119482.252921]  [<ffffffff815a8013>] ipv4_conntrack_defrag+0x83/0xe0
[119482.257803]  [<ffffffff8154485b>] nf_iterate+0x8b/0xa0
[119482.262658]  [<ffffffff8155c7f0>] ? inet_del_offload+0x40/0x40
[119482.267527]  [<ffffffff815448e4>] nf_hook_slow+0x74/0x130
[119482.272412]  [<ffffffff8155c7f0>] ? inet_del_offload+0x40/0x40
[119482.277302]  [<ffffffff8155d068>] ip_rcv+0x268/0x320
[119482.282147]  [<ffffffff81519992>] __netif_receive_skb_core+0x612/0x7e0
[119482.286998]  [<ffffffff81519b78>] __netif_receive_skb+0x18/0x60
[119482.291826]  [<ffffffff8151a650>] process_backlog+0xa0/0x160
[119482.296648]  [<ffffffff81519f29>] net_rx_action+0x139/0x220
[119482.301403]  [<ffffffff81053707>] __do_softirq+0xe7/0x220
[119482.306103]  [<ffffffff81053868>] run_ksoftirqd+0x28/0x40
[119482.310809]  [<ffffffff81074f5f>] smpboot_thread_fn+0xff/0x1a0
[119482.315515]  [<ffffffff81074e60>] ? lg_local_lock_cpu+0x40/0x40
[119482.320219]  [<ffffffff8106d870>] kthread+0xc0/0xd0
[119482.324858]  [<ffffffff8106d7b0>] ? insert_kthread_work+0x40/0x40
[119482.329460]  [<ffffffff816c32dc>] ret_from_fork+0x7c/0xb0
[119482.334057]  [<ffffffff8106d7b0>] ? insert_kthread_work+0x40/0x40
[119482.338661] Code: 00 00 55 48 8b 17 48 b9 00 01 10 00 00 00 ad de 48 8b 47 08 48 89 e5 48 39 ca 74 29 48 b9 00 02 20 00 00 00 ad de 48 39 c8 74 7a <4c> 8b 00 4c 39 c7 75 53 4c 8b 42 08 4c 39 c7 75 2b 48 89 42 08
[119482.343787] RIP  [<ffffffff812ede89>] __list_del_entry+0x29/0xd0
[119482.348675]  RSP <ffff880216d5db58>
[119482.353493] CR2: 0000000000000000

Oops happened on this path:
ip_defrag() -> ip_frag_queue() -> inet_frag_lru_move() -> list_move_tail() -> __list_del_entry()
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Eric Dumazet <edumazet@google.com>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull MFD update from Samuel Ortiz:
 "For 3.10 we have a few new MFD drivers for:

   - The ChromeOS embedded controller which provides keyboard, battery
     and power management services.  This controller is accessible
     through i2c or SPI.

   - Silicon Laboratories 476x controller, providing access to their FM
     chipset and their audio codec.

   - Realtek's RTS5249, a memory stick, MMC and SD/SDIO PCI based
     reader.

   - Nokia's Tahvo power button and watchdog device.  This device is
     very similar to Retu and is thus supported by the same code base.

   - STMicroelectronics STMPE1801, a keyboard and GPIO controller
     supported by the stmpe driver.

   - ST-Ericsson AB8540 and AB8505 power management and voltage
     converter controllers through the existing ab8500 code.

  Some other drivers got cleaned up or improved.  In particular:

   - The Linaro/STE guys got the ab8500 driver in sync with their
     internal code through a series of optimizations, fixes and
     improvements.

   - The AS3711 and OMAP USB drivers now have DT support.

   - The arizona clock and interrupt handling code got improved.

   - The wm5102 register patch and boot mechanism also got improved."

* tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (104 commits)
  mfd: si476x: Don't use 0bNNN
  mfd: vexpress: Handle pending config transactions
  mfd: ab8500: Export ab8500_gpadc_sw_hw_convert properly
  mfd: si476x: Fix i2c warning
  mfd: si476x: Add header files and Kbuild plumbing
  mfd: si476x: Add chip properties handling code
  mfd: si476x: Add the bulk of the core driver
  mfd: si476x: Add commands abstraction layer
  mfd: rtsx: Support RTS5249
  mfd: retu: Add Tahvo support
  mfd: ucb1400: Pass ucb1400-gpio data through ac97 bus
  mfd: wm8994: Add some OF properties
  mfd: wm8994: Add device ID data to WM8994 OF device IDs
  input: Export matrix_keypad_parse_of_params()
  mfd: tps65090: Add compatible string for charger subnode
  mfd: db8500-prcmu: Support platform dependant device selection
  mfd: syscon: Fix warnings when printing resource_size_t
  of: Add stub of_get_parent for non-OF builds
  mfd: omap-usb-tll: Convert to devm_ioremap_resource()
  mfd: omap-usb-host: Convert to devm_ioremap_resource()
  ...

Pull kvm updates from Gleb Natapov:
 "Highlights of the updates are:

  general:
   - new emulated device API
   - legacy device assignment is now optional
   - irqfd interface is more generic and can be shared between arches

  x86:
   - VMCS shadow support and other nested VMX improvements
   - APIC virtualization and Posted Interrupt hardware support
   - Optimize mmio spte zapping

  ppc:
    - BookE: in-kernel MPIC emulation with irqfd support
    - Book3S: in-kernel XICS emulation (incomplete)
    - Book3S: HV: migration fixes
    - BookE: more debug support preparation
    - BookE: e6500 support

  ARM:
   - reworking of Hyp idmaps

  s390:
   - ioeventfd for virtio-ccw

  And many other bug fixes, cleanups and improvements"

* tag 'kvm-3.10-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
  kvm: Add compat_ioctl for device control API
  KVM: x86: Account for failing enable_irq_window for NMI window request
  KVM: PPC: Book3S: Add API for in-kernel XICS emulation
  kvm/ppc/mpic: fix missing unlock in set_base_addr()
  kvm/ppc: Hold srcu lock when calling kvm_io_bus_read/write
  kvm/ppc/mpic: remove users
  kvm/ppc/mpic: fix mmio region lists when multiple guests used
  kvm/ppc/mpic: remove default routes from documentation
  kvm: KVM_CAP_IOMMU only available with device assignment
  ARM: KVM: iterate over all CPUs for CPU compatibility check
  KVM: ARM: Fix spelling in error message
  ARM: KVM: define KVM_ARM_MAX_VCPUS unconditionally
  KVM: ARM: Fix API documentation for ONE_REG encoding
  ARM: KVM: promote vfp_host pointer to generic host cpu context
  ARM: KVM: add architecture specific hook for capabilities
  ARM: KVM: perform HYP initilization for hotplugged CPUs
  ARM: KVM: switch to a dual-step HYP init code
  ARM: KVM: rework HYP page table freeing
  ARM: KVM: enforce maximum size for identity mapped code
  ARM: KVM: move to a KVM provided HYP idmap
  ...

Give the OID registry file module information so that it doesn't taint the
kernel when compiled as a module and loaded.
Reported-by: Dros Adamson <Weston.Adamson@netapp.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Trond Myklebust <Trond.Myklebust@netapp.com>
cc: stable@vger.kernel.org
cc: linux-nfs@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

TCP metric cache expires entries after one hour.

This probably make sense for TCP RTT/RTTVAR/CWND, but not
for TCP fastopen cookies.

Its better to try previous cookie. If it appears to be obsolete,
server will send us new cookie anyway.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some ancient pHyp versions used to create a 8 bytes local-mac-address
property in the device-tree instead of a 6 bytes one for veth.

The Linux driver code to deal with that is an insane hack which also
happens to break with some choices of MAC addresses in qemu by testing
for a bit in the address rather than just looking at the size of the
property.

Sanitize this by doing the latter instead.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Programs using virtio headers outside of kernel will no longer
build because u16 type does not exist in userspace. All user ABI
must use __u16 typedef instead.

Bug introduce by:
  commit 986a4f4d
  Author: Jason Wang <jasowang@redhat.com>
  Date:   Fri Dec 7 07:04:56 2012 +0000

    virtio_net: multiqueue support
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull 'full dynticks' support from Ingo Molnar:
 "This tree from Frederic Weisbecker adds a new, (exciting! :-) core
  kernel feature to the timer and scheduler subsystems: 'full dynticks',
  or CONFIG_NO_HZ_FULL=y.

  This feature extends the nohz variable-size timer tick feature from
  idle to busy CPUs (running at most one task) as well, potentially
  reducing the number of timer interrupts significantly.

  This feature got motivated by real-time folks and the -rt tree, but
  the general utility and motivation of full-dynticks runs wider than
  that:

   - HPC workloads get faster: CPUs running a single task should be able
     to utilize a maximum amount of CPU power.  A periodic timer tick at
     HZ=1000 can cause a constant overhead of up to 1.0%.  This feature
     removes that overhead - and speeds up the system by 0.5%-1.0% on
     typical distro configs even on modern systems.

   - Real-time workload latency reduction: CPUs running critical tasks
     should experience as little jitter as possible.  The last remaining
     source of kernel-related jitter was the periodic timer tick.

   - A single task executing on a CPU is a pretty common situation,
     especially with an increasing number of cores/CPUs, so this feature
     helps desktop and mobile workloads as well.

  The cost of the feature is mainly related to increased timer
  reprogramming overhead when a CPU switches its tick period, and thus
  slightly longer to-idle and from-idle latency.

  Configuration-wise a third mode of operation is added to the existing
  two NOHZ kconfig modes:

   - CONFIG_HZ_PERIODIC: [formerly !CONFIG_NO_HZ], now explicitly named
     as a config option.  This is the traditional Linux periodic tick
     design: there's a HZ tick going on all the time, regardless of
     whether a CPU is idle or not.

   - CONFIG_NO_HZ_IDLE: [formerly CONFIG_NO_HZ=y], this turns off the
     periodic tick when a CPU enters idle mode.

   - CONFIG_NO_HZ_FULL: this new mode, in addition to turning off the
     tick when a CPU is idle, also slows the tick down to 1 Hz (one
     timer interrupt per second) when only a single task is running on a
     CPU.

  The .config behavior is compatible: existing !CONFIG_NO_HZ and
  CONFIG_NO_HZ=y settings get translated to the new values, without the
  user having to configure anything.  CONFIG_NO_HZ_FULL is turned off by
  default.

  This feature is based on a lot of infrastructure work that has been
  steadily going upstream in the last 2-3 cycles: related RCU support
  and non-periodic cputime support in particular is upstream already.

  This tree adds the final pieces and activates the feature.  The pull
  request is marked RFC because:

   - it's marked 64-bit only at the moment - the 32-bit support patch is
     small but did not get ready in time.

   - it has a number of fresh commits that came in after the merge
     window.  The overwhelming majority of commits are from before the
     merge window, but still some aspects of the tree are fresh and so I
     marked it RFC.

   - it's a pretty wide-reaching feature with lots of effects - and
     while the components have been in testing for some time, the full
     combination is still not very widely used.  That it's default-off
     should reduce its regression abilities and obviously there are no
     known regressions with CONFIG_NO_HZ_FULL=y enabled either.

   - the feature is not completely idempotent: there is no 100%
     equivalent replacement for a periodic scheduler/timer tick.  In
     particular there's ongoing work to map out and reduce its effects
     on scheduler load-balancing and statistics.  This should not impact
     correctness though, there are no known regressions related to this
     feature at this point.

   - it's a pretty ambitious feature that with time will likely be
     enabled by most Linux distros, and we'd like you to make input on
     its design/implementation, if you dislike some aspect we missed.
     Without flaming us to crisp! :-)

  Future plans:

   - there's ongoing work to reduce 1Hz to 0Hz, to essentially shut off
     the periodic tick altogether when there's a single busy task on a
     CPU.  We'd first like 1 Hz to be exposed more widely before we go
     for the 0 Hz target though.

   - once we reach 0 Hz we can remove the periodic tick assumption from
     nr_running>=2 as well, by essentially interrupting busy tasks only
     as frequently as the sched_latency constraints require us to do -
     once every 4-40 msecs, depending on nr_running.

  I am personally leaning towards biting the bullet and doing this in
  v3.10, like the -rt tree this effort has been going on for too long -
  but the final word is up to you as usual.

  More technical details can be found in Documentation/timers/NO_HZ.txt"

* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
  sched: Keep at least 1 tick per second for active dynticks tasks
  rcu: Fix full dynticks' dependency on wide RCU nocb mode
  nohz: Protect smp_processor_id() in tick_nohz_task_switch()
  nohz_full: Add documentation.
  cputime_nsecs: use math64.h for nsec resolution conversion helpers
  nohz: Select VIRT_CPU_ACCOUNTING_GEN from full dynticks config
  nohz: Reduce overhead under high-freq idling patterns
  nohz: Remove full dynticks' superfluous dependency on RCU tree
  nohz: Fix unavailable tick_stop tracepoint in dynticks idle
  nohz: Add basic tracing
  nohz: Select wide RCU nocb for full dynticks
  nohz: Disable the tick when irq resume in full dynticks CPU
  nohz: Re-evaluate the tick for the new task after a context switch
  nohz: Prepare to stop the tick on irq exit
  nohz: Implement full dynticks kick
  nohz: Re-evaluate the tick from the scheduler IPI
  sched: New helper to prevent from stopping the tick in full dynticks
  sched: Kick full dynticks CPU that have more than one task enqueued.
  perf: New helper to prevent full dynticks CPUs from stopping tick
  perf: Kick full dynticks CPU if events rotation is needed
  ...

Pull perf fixes from Ingo Molnar:
 "Misc fixes plus a small hw-enablement patch for Intel IB model 58
  uncore events"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/lbr: Demand proper privileges for PERF_SAMPLE_BRANCH_KERNEL
  perf/x86/intel/lbr: Fix LBR filter
  perf/x86: Blacklist all MEM_*_RETIRED events for Ivy Bridge
  perf: Fix vmalloc ring buffer pages handling
  perf/x86/intel: Fix unintended variable name reuse
  perf/x86/intel: Add support for IvyBridge model 58 Uncore
  perf/x86/intel: Fix typo in perf_event_intel_uncore.c
  x86: Eliminate irq_mis_count counted in arch_irq_stat

Pull mudule updates from Rusty Russell:
 "We get rid of the general module prefix confusion with a binary config
  option, fix a remove/insert race which Never Happens, and (my
  favorite) handle the case when we have too many modules for a single
  commandline.  Seriously, the kernel is full, please go away!"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  modpost: fix unwanted VMLINUX_SYMBOL_STR expansion
  X.509: Support parse long form of length octets in Authority Key Identifier
  module: don't unlink the module until we've removed all exposure.
  kernel: kallsyms: memory override issue, need check destination buffer length
  MODSIGN: do not send garbage to stderr when enabling modules signature
  modpost: handle huge numbers of modules.
  modpost: add -T option to read module names from file/stdin.
  modpost: minor cleanup.
  genksyms: pass symbol-prefix instead of arch
  module: fix symbol versioning with symbol prefixes
  CONFIG_SYMBOL_PREFIX: cleanup.

Pull single_open() leak fixes from Al Viro:
 "A bunch of fixes for a moderately common class of bugs: file with
  single_open() done by its ->open() and seq_release as its ->release().

  That leaks; fortunately, it's not _too_ common (either people manage
  to RTFM that says "When using single_open(), the programmer should use
  single_release() instead of seq_release() in the file_operations
  structure to avoid a memory leak", or they just copy a correct
  instance), but grepping through the tree has caught quite a pile.

  All of that is, AFAICS, -stable fodder, for as far as the patches
  apply.  I tried to carve it up into reasonably-sized pieces (more or
  less "comes from the same tree")"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  rcutrace: single_open() leaks
  gadget: single_open() leaks
  staging: single_open() leaks
  megaraid: single_open() leak
  wireless: single_open() leaks
  input: single_open() leak
  rtc: single_open() leaks
  ds1620: single_open() leak
  sh: single_open() leaks
  parisc: single_open() leaks
  mips: single_open() leaks
  ia64: single_open() leaks
  h8300: single_open() leaks
  cris: single_open() leaks
  arm: single_open() leaks

Merge ipc fixes and cleanups from my IPC branch.

The ipc locking has always been pretty ugly, and the scalability fixes
to some degree made it even less readable.  We had two cases of double
unlocks in error paths due to this (one rcu read unlock, one semaphore
unlock), and this fixes the bugs I found while trying to clean things up
a bit so that we are less likely to have more.

* ipc-cleanups:
  ipc: simplify rcu_read_lock() in semctl_nolock()
  ipc: simplify semtimedop/semctl_main() common error path handling
  ipc: move sem_obtain_lock() rcu locking into the only caller
  ipc: fix double sem unlock in semctl error path
  ipc: move the rcu_read_lock() from sem_lock_and_putref() into callers
  ipc: sem_putref() does not need the semaphore lock any more
  ipc: move rcu_read_unlock() out of sem_unlock() and into callers

This API shouldn't have 32/64-bit issues, but VFS assumes it does
unless told otherwise.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>

We should always have proper privileges when requesting kernel
data.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/20130503121256.230745028@chello.nl
[ Fix build error reported by fengguang.wu@intel.com, propagate error code back. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/n/tip-v0x9ky3ahzr6nm3c6ilwrili@git.kernel.org

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>