- 27 Mar, 2020 14 commits
-
-
Kuninori Morimoto authored
Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87mu87ir6j.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Now, snd_soc_pcm_runtime supports multi cpu_dai/codec_dai. It still has cpu_dai/codec_dai for single DAI, and has cpu_dais/codec_dais for multi DAIs. dais = [][][][][][][][][][][][][][][][][][] ^cpu_dais ^codec_dais |--- num_cpus ---|--- num_codecs --| /* for multi DAIs */ rtd->cpu_dais = &rtd->dais[0]; rtd->codec_dais = &rtd->dais[dai_link->num_cpus]; /* for single DAI */ rtd->cpu_dai = rtd->cpu_dais[0]; rtd->codec_dai = rtd->codec_dais[0]; But, these can be replaced by dais. This patch adds asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for it. Signed-off-by:
-
- 26 Mar, 2020 16 commits
-
-
Mark Brown authored
Merge series "ASoC: rt1308-sdw: configure amplifier with set_tdm_slot()" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: When two (or more) amplifiers are on the same link, the integrator may: a) assign dedicated slots for each of the amplifiers. b) provide the same configuration to all amplifiers, and rely on additional controls/processing in the amplifier to generate different outputs. case a) was the initial direction for SoundWire and is required for amplifiers with limited capabilities, but to deal with orientation or 'posture' changes it's easier to implement case b) when the amplifier can deal with multiple channels. This patchset suggest the use of the set_tdm_slot() API to define which of the channels will be consumed by what amplifiers. This maps well with SoundWire's 'ChannelEnable' registers. The notion of slot_width is however irrelevant here and ignored, and SoundWire ports are typically single direction, so only one of the two masks shall be used. Pierre-Louis Bossart (2): ASoC: rt1308-sdw: add set_tdm_slot() support ASoC: rt1308-sdw: use slot and rx_mask to configure stream sound/soc/codecs/rt1308-sdw.c | 38 +++++++++++++++++++++++++++++++---- sound/soc/codecs/rt1308-sdw.h | 2 ++ 2 files changed, 36 insertions(+), 4 deletions(-) -- 2.20.1
-
Mark Brown authored
Merge series "ASoC: Intel: machine driver updates" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: One correction for GeminiLake and 2 additional machine drivers for Chromebooks. Curtis Malainey (1): ASoC: Intel: Make glk+rt5682 echo ref dynamic Sathyanarayana Nujella (2): ASoC: Intel: sof_rt5682: Add support for tgl-max98373-rt5682 ASoC: Intel: common: Add mach table for tgl-max98373-rt5682 Yong Zhi (1): ASoC: intel: sof_da7219_max98373: Add speaker switch sound/soc/intel/boards/Kconfig | 1 + sound/soc/intel/boards/Makefile | 2 +- sound/soc/intel/boards/glk_rt5682_max98357a.c | 1 + sound/soc/intel/boards/sof_da7219_max98373.c | 67 +++++++++------- sound/soc/intel/boards/sof_maxim_common.c | 80 +++++++++++++++++++ sound/soc/intel/boards/sof_maxim_common.h | 24 ++++++ sound/soc/intel/boards/sof_rt5682.c | 21 +++++ .../intel/common/soc-acpi-intel-tgl-match.c | 13 +++ 8 files changed, 178 insertions(+), 31 deletions(-) create mode 100644 sound/soc/intel/boards/sof_maxim_common.c create mode 100644 sound/soc/intel/boards/sof_maxim_common.h -- 2.20.1
-
Mark Brown authored
Merge series "ASoC: SOF: cleanups and improvements" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Couple of small patches to improve error handling, inits, logs. Hope we can have this for 5.7? Guennadi Liakhovetski (2): ASoC: SOF: (cosmetic) use for_each_pcm_streams() in sof_dai_load() ASoC: SOF: fix uninitialised "work" with VirtIO Kai Vehmanen (2): ASoC: SOF: Intel: hda: do not leave clock gating off upon error ASoC: SOF: Intel: hda: call codec wake at chip init Ranjani Sridharan (1): ASoC: SOF: Intel: hda: Improve DSP state logging sound/soc/sof/intel/hda-ctrl.c | 15 +++++++++--- sound/soc/sof/intel/hda-dsp.c | 43 ++++++++++++++++++++++++++++++++-- sound/soc/sof/pcm.c | 4 +--- sound/soc/sof/sof-audio.h | 3 +++ sound/soc/sof/topology.c | 17 ++++++++++---- 5 files changed, 69 insertions(+), 13 deletions(-) -- 2.20.1
-
Mark Brown authored
The AC'97 based PXA machines currently don't build reliably as they don't ensure that an AC'97 bus is built, causing at least eseries_pxa_defconfig to fail to build. Add selects to fix this. Reported-by:
KernelCI <bot@kernelci.org> Signed-off-by:
-
Mark Brown authored
regmap needs to be selected by users which for machine drivers that select AC'97 CODEC drivers means that we need to also select regmap to ensure that the CODEC driver will build if nothing else enables regmap as is likely for such systems. Signed-off-by:
-
Pierre-Louis Bossart authored
If the DAI was configured with a set_tdm_slots() call, use the information. A platform or machine driver may configure each amplifier to extract different bitSlots from the frame, or extract the same data and use processing to generate the relevant output. The latter case is easier to handle in case of orientation changes. Signed-off-by:
-
Pierre-Louis Bossart authored
Add ability to select which of the channels is used, or both, in case two RT1308 amplifiers are located on the same link. Signed-off-by:
-
Kai Vehmanen authored
Further align HDA init sequence to the legacy non-DSP HDA driver by calling snd_hdac_set_codec_wakeup() during the chip init sequence. Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20200325211233.27394-6-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Kai Vehmanen authored
The misc clock gating (MISCBDCGE) is disabled for controller reset and reenabled once reset is complete. Fix the case when error happens during reset, and clock gating is left disabled. The clock gating should be reenabled also in this case. Signed-off-by:
-
Guennadi Liakhovetski authored
In the VirtIO case the sof_pcm_open() function isn't called on the host during guest streaming, which then leaves "work" structures uninitialised. However it is then used to handle position update messages from the DSP. Move their initialisation to immediately after allocation of the containing structure. Signed-off-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by:
-
Guennadi Liakhovetski authored
Use for_each_pcm_streams() to enumerate streams in sof_dai_load() instead of doing that manually. Signed-off-by:
-
Ranjani Sridharan authored
Improve the DSP power state logs with the state names instead of values. Signed-off-by:
-
Sathyanarayana Nujella authored
Update tgl mach table with: Maxim98373 Amp and ALC5682 hp codec. Both of the codecs are on I2S bus. Signed-off-by:
Jairaj Arava <jairaj.arava@intel.com> Signed-off-by:
Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Signed-off-by:
-
Sathyanarayana Nujella authored
This patch does the below: 1. Adds the driver data and updates quirk info for TGL with Max98373 speaker amp and ALC5682 headset codec. 2. Added max98373 speaker related code to common file for re-use. Signed-off-by: -
Yong Zhi authored
Add "Spk Switch" and associated widget, route to max98360a speaker amp for power saving, also remove the speaker_amp_init() callback with complete separated tables for max98373 and max98360a. Signed-off-by:
Bhat, Uday M <uday.m.bhat@intel.com> Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Link: https://lore.kernel.org/r/20200325213245.28247-3-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Curtis Malainey authored
Without the dynamic flag to allow runtime routing, the card cannot probe on chromebooks because SOF is constantly waiting for the link. Adding flag back to allow upstream kernels to work on rt5682 based chromebooks since SOF can now ignore the hard coded front end. Signed-off-by:
Curtis Malainey <cujomalainey@chromium.org> Signed-off-by:
-
- 25 Mar, 2020 1 commit
-
-
Colin Ian King authored
The signed 1 bit bitfields should be unsigned, so make them unsigned. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20200325132913.110115-1-colin.king@canonical.comSigned-off-by:
-
- 24 Mar, 2020 6 commits
-
-
Paul Cercueil authored
Convert the textual binding documentation for the AIC (AC97/I2S Controller) of Ingenic SoCs to a YAML schema, and add the new compatible strings in the process. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200306222931.39664-1-paul@crapouillou.netSigned-off-by:
-
Paul Cercueil authored
Before the JZ4770, the playback and capture sampling rates had to match. The JZ4770 supports independent sampling rates for both. Signed-off-by:
-
Paul Cercueil authored
The change of offset for the {rx,tx}_threshold fields in the conf register predates the JZ4780, and was first introduced in the JZ4760. Signed-off-by: -
Johan Jonker authored
'#sound-dai-cells' is required to properly interpret the list of DAI specified in the 'sound-dai' property, so add them to 'rockchip-i2s.yaml' Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Reviewed-by:
-
Johan Jonker authored
Current dts files with 'i2s' nodes are manually verified. In order to automate this process rockchip-i2s.txt has to be converted to yaml. Signed-off-by:
-
YueHaibing authored
sound/soc/codecs/wm8974.c:200:38: warning: wm8974_aux_boost_controls defined but not used [-Wunused-const-variable=] sound/soc/codecs/wm8974.c:204:38: warning: wm8974_mic_boost_controls defined but not used [-Wunused-const-variable=] commit 8a123ee2 ("ASoC: WM8974 DAPM cleanups") left behind this, remove them. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200324070615.16248-1-yuehaibing@huawei.comSigned-off-by:
-
- 23 Mar, 2020 3 commits
-
-
Mark Brown authored
Merge series "Support built-in Mic on Tegra boards that use WM8903" from Dmitry Osipenko <digetx@gmail.com>: Hello, This small series adds audio route for built-in microphone on NVIDIA Tegra boards that use WM8903 CODEC. In particular this is needed in order to unmute internal microphone on Acer A500 tablet device. I'm planning to send out the device tree for the A500 for 5.8, so will be nice to get the microphone sorted out. Please review and apply, thanks in advance. Dmitry Osipenko (2): dt-bindings: sound: tegra-wm8903: Document built-in microphone audio source ASoC: tegra: tegra_wm8903: Support DAPM events for built-in microphone .../sound/nvidia,tegra-audio-wm8903.txt | 1 + sound/soc/tegra/tegra_wm8903.c | 18 ++++++++++++++++++ 2 files changed, 19 insertions(+) -- 2.25.1 -
Oder Chiou authored
The patch adds the descriptions for the DMIC clock rate and delay settings. Signed-off-by:
Oder Chiou <oder_chiou@realtek.com> Link: https://lore.kernel.org/r/20200323082547.7898-3-oder_chiou@realtek.comSigned-off-by:
-
Oder Chiou authored
The patch adds a property for DMIC delay (ms) to avoid pop noise and changes the default delay setting. Signed-off-by:
-
