- 04 Jun, 2014 40 commits
-
-
Fabian Frederick authored
Use cpu_to_le32 instead of __constant_cpu_to_le32. Signed-off-by:
Fabian Frederick <fabf@skynet.be> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Fabian Frederick authored
index has been removed from __radix_tree_delete_node in 449dd698 ("mm: keep page cache radix tree nodes in check") Signed-off-by:
-
Dan Streetman authored
Change CONFIG_DEBUG_PI_LIST to be user-selectable, and add a title and description. Remove the dependency on DEBUG_RT_MUTEXES since they were changed to use rbtrees, and there are other users of plists now. Signed-off-by:
Dan Streetman <ddstreet@ieee.org> Acked-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Minfei Huang authored
I use btree from 3.14-rc2 in my own module. When the btree module is removed, a warning arises: kmem_cache_destroy btree_node: Slab cache still has objects CPU: 13 PID: 9150 Comm: rmmod Tainted: GF O 3.14.0-rc2 #1 Hardware name: Inspur NF5270M3/NF5270M3, BIOS CHEETAH_2.1.3 09/10/2013 Call Trace: dump_stack+0x49/0x5d kmem_cache_destroy+0xcf/0xe0 btree_module_exit+0x10/0x12 [btree] SyS_delete_module+0x198/0x1f0 system_call_fastpath+0x16/0x1b The cause is that it doesn't release the last btree node, when height = 1 and fill = 1. [akpm@linux-foundation.org: remove unneeded test of NULL] Signed-off-by:
Minfei Huang <huangminfei@ucloud.cn> Cc: Joern Engel <joern@logfs.org> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Fabian Frederick authored
Fixing 2 coccinelle warnings: lib/vsprintf.c:2350:2-9: WARNING: Assignment of bool to 0/1 lib/vsprintf.c:2389:3-10: WARNING: Assignment of bool to 0/1 Signed-off-by:
-
Fabian Frederick authored
replace IS_ERR/PTR_ERR Signed-off-by:
-
Lasse Collin authored
This restores the old behavior that existed before 2013-02-22, when changes were made by 64dbfb44 ("decompressors: drop dependency on CONFIG_EXPERT") and 5dc49c75 ("decompressors: make the default XZ_DEC_* config match the selected architecture"). Disabling the filters only makes sense on embedded systems. Signed-off-by:
Lasse Collin <lasse.collin@tukaani.org> Acked-by:
Kyle McMartin <kyle@infradead.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Phillip Lougher <phillip@lougher.demon.co.uk> Signed-off-by:
-
Dan Streetman authored
Replace pr_debug() in lib/plist.c test function plist_test() with printk(KERN_DEBUG ...). Without DEBUG defined, pr_debug() is complied out, but the entire plist_test() function is already inside CONFIG_DEBUG_PI_LIST, so printk should just be used directly. Signed-off-by:
-
Lasse Collin authored
Signed-off-by:
-
Dan Carpenter authored
For strncpy() and friends the source string may or may not have an actual NUL character at the end. The documentation is confusing in this because it specifically mentions that you are passing a "NUL-terminated" string. Wikipedia says that "C-string" is an alternative name we can use instead. http://en.wikipedia.org/wiki/Null-terminated_stringSigned-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Borislav Petkov authored
... instead of naked numbers. Stuff in sysrq.c used to set it to 8 which is supposed to mean above default level so set it to DEBUG instead as we're terminating/killing all tasks and we want to be verbose there. Also, correct the check in x86_64_start_kernel which should be >= as we're clearly issuing the string there for all debug levels, not only the magical 10. Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
Kees Cook <keescook@chromium.org> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Joe Perches <joe@perches.com> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Signed-off-by:
-
Will Deacon authored
If the log ring buffer becomes full, we silently overwrite old messages with new data. console_unlock will detect this case and fast-forward the console_* pointers to skip over the corrupted data, but nothing will be reported to the user. This patch hijacks the first valid log message after detecting that we dropped messages and prefixes it with a note detailing how many messages were dropped. For long (~1000 char) messages, this will result in some truncation of the real message, but given that we're dropping things anyway, that doesn't seem to be the end of the world. Signed-off-by:
Will Deacon <will.deacon@arm.com> Acked-by:
Peter Zijlstra <peterz@infradead.org> Cc: Kay Sievers <kay@vrfy.org> Cc: Jan Kara <jack@suse.cz> Signed-off-by:
-
Dan Streetman authored
The pr_debug() and related debug print macros all differ from the normal pr_XXX() macros, in that the normal ones print unconditionally, while the debug macros are compiled out unless DEBUG is defined or CONFIG_DYNAMIC_DEBUG is set. This isn't obvious, and the only way to find this out is either to review the actual printk.h code or to read CodingStyle, and the message there doesn't highlight the fact. Change Documentation/CodingStyle to clearly indicate that pr_debug() and related debug printing macros behave differently than all other pr_XXX() macros, and attempt to clarify when and where the different debug printing methods might be used. Add short comment to printk.h above the pr_XXX() macros indicating that while these macros print unconditionally, pr_debug() does not. Signed-off-by:
-
John Stultz authored
Jiri Bohac pointed out that there are rare but potential deadlock possibilities when calling printk while holding the timekeeping seqlock. This is due to printk() triggering console sem wakeup, which can cause scheduling code to trigger hrtimers which may try to read the time. Specifically, as Jiri pointed out, that path is: printk vprintk_emit console_unlock up(&console_sem) __up wake_up_process try_to_wake_up ttwu_do_activate ttwu_activate activate_task enqueue_task enqueue_task_fair hrtick_update hrtick_start_fair hrtick_start_fair get_time ktime_get --> endless loop on read_seqcount_retry(&timekeeper_seq, ...) This patch tries to avoid this issue by using printk_deferred (previously named printk_sched) which should defer printing via a irq_work_queue. Signed-off-by:John Stultz <john.stultz@linaro.org> Reported-by:
Jiri Bohac <jbohac@suse.cz> Reviewed-by:
-
John Stultz authored
Two of the three prink_deferred uses are really printk_once style uses, so add a printk_deferred_once macro to simplify those call sites. Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Bohac <jbohac@suse.cz> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by:
-
John Stultz authored
After learning we'll need some sort of deferred printk functionality in the timekeeping core, Peter suggested we rename the printk_sched function so it can be reused by needed subsystems. This only changes the function name. No logic changes. Signed-off-by:
-
John Stultz authored
An earlier change in -mm (printk: remove separate printk_sched buffers...), removed the printk_sched irqsave/restore lines since it was safe for current users. Since we may be expanding usage of printk_sched(), disable preepmtion for this function to make it more generally safe to call. Signed-off-by:
-
Steven Rostedt authored
To prevent deadlocks with doing a printk inside the scheduler, printk_sched() was created. The issue is that printk has a console_sem that it can grab and release. The release does a wake up if there's a task pending on the sem, and this wake up grabs the rq locks that is held in the scheduler. This leads to a possible deadlock if the wake up uses the same rq as the one with the rq lock held already. What printk_sched() does is to save the printk write in a per cpu buffer and sets the PRINTK_PENDING_SCHED flag. On a timer tick, if this flag is set, the printk() is done against the buffer. There's a couple of issues with this approach. 1) If two printk_sched()s are called before the tick, the second one will overwrite the first one. 2) The temporary buffer is 512 bytes and is per cpu. This is a quite a bit of space wasted for something that is seldom used. In order to remove this, the printk_sched() can use the printk buffer instead, and delay the console_trylock()/console_unlock() to the queued work. Because printk_sched() would then be taking the logbuf_lock, the logbuf_lock must not be held while doing anything that may call into the scheduler functions, which includes wake ups. Unfortunately, printk() also has a console_sem that it uses, and on release, the up(&console_sem) may do a wake up of any pending waiters. This must be avoided while holding the logbuf_lock. Signed-off-by:
-
Jan Kara authored
We need interrupts disabled when calling console_trylock_for_printk() only so that cpu id we pass to can_use_console() remains valid (for other things console_sem provides all the exclusion we need and deadlocks on console_sem due to interrupts are impossible because we use down_trylock()). However if we are rescheduled, we are guaranteed to run on an online cpu so we can easily just get the cpu id in can_use_console(). We can lose a bit of performance when we enable interrupts in vprintk_emit() and then disable them again in console_unlock() but OTOH it can somewhat reduce interrupt latency caused by console_unlock() especially since later in the patch series we will want to spin on console_sem in console_trylock_for_printk(). Signed-off-by:
-
Jan Kara authored
Printk calls mutex_acquire() / mutex_release() by hand to instrument lockdep about console_sem. However in some corner cases the instrumentation is missing. Fix the problem by creating helper functions for locking / unlocking console_sem which take care of lockdep instrumentation as well. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Reported-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by:
Fabio Estevam <fabio.estevam@freescale.com> Tested-By:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Jan Kara authored
There's no reason to hold lockbuf_lock when entering console_trylock_for_printk(). The first thing this function does is to call down_trylock(console_sem) and if that fails it immediately unlocks lockbuf_lock. So lockbuf_lock isn't needed for that branch. When down_trylock() succeeds, the rest of console_trylock() is OK without lockbuf_lock (it is called without it from other places), and the only remaining thing in console_trylock_for_printk() is can_use_console() call. For that call console_sem is enough (it iterates all consoles and checks CON_ANYTIME flag). So we drop logbuf_lock before entering console_trylock_for_printk() which simplifies the code. [akpm@linux-foundation.org: fix have_callable_console() comment] Signed-off-by:
-
Jan Kara authored
Comment about interesting interlocking between lockbuf_lock and console_sem is outdated. It was added in 2002 by commit a880f45a during conversion of console_lock to console_sem + lockbuf_lock. At that time release_console_sem() (today's equivalent is console_unlock()) was indeed using lockbuf_lock to avoid races between trylock on console_sem in printk() and unlock of console_sem. However these days the interlocking is gone and the races are avoided by rechecking logbuf state after releasing console_sem. Signed-off-by:
-
Petr Mladek authored
I wonder if anyone uses printk return value but it is there and should be counted correctly. This patch modifies log_store() to return the number of really stored bytes from the 'text' part. Also it handles the return value in vprintk_emit(). Note that log_store() is used also in cont_flush() but we could ignore the return value there. The function works with characters that were already counted earlier. In addition, the store could newer fail here because the length of the printed text is limited by the "cont" buffer and "dict" is NULL. Signed-off-by:
Petr Mladek <pmladek@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by:
-
Petr Mladek authored
We might want to print at least part of too long messages and add some warning for debugging purpose. The question is how long the shrunken message should be. If we use the whole buffer, it might get rotated too soon. Let's try to use only 1/4 of the buffer for now. Also shrink the whole dictionary. We do not want to parse it or break it in the middle of some pair of values. It would not cause any real harm but still. Signed-off-by:
-
Petr Mladek authored
We will want to recompute the message size when shrinking too long messages. Let's put the code into separate function. The side effect of setting "pad_len" is not nice but it is worth removing the code duplication. Note that I will probably have one more usage for this function when handling messages safe way in NMI context. This patch does not change the existing behavior. Signed-off-by:
-
Petr Mladek authored
There was no check for too long messages. The check for free space always passed when first_seq and next_seq were equal. Enough free space was not guaranteed, though. log_store() might be called to store messages up to 64kB + 64kB + 16B. This is sum of maximal text_len, dict_len values, and the size of the structure printk_log. On the other hand, the minimal size for the main log buffer currently is 4kB and it is enforced only by Kconfig. The good news is that the usage looks safe right now. log_store() is called only from vprintk_emit() and cont_flush(). Here the "text" part is always passed via a static buffer and the length is limited to LOG_LINE_MAX which is 1024. The "dict" part is NULL in most cases. The only exceptions is when vprintk_emit() is called from printk_emit() and dev_vprintk_emit(). But printk_emit() is currently used only in devkmsg_writev() and here "dict" is NULL as well. In dev_vprintk_emit(), "dict" is limited by the static buffer "hdr" of the size 128 bytes. It meas that the current maximal printed text is 1024B + 128B + 16B and it always fit the log buffer. But it is only matter of time when someone calls printk_emit() with unsafe parameters, especially the "dict" one. This patch adds a check for the free space when the buffer is empty. It reuses the already existing log_has_space() function but it has to add an extra parameter. It defines whether the buffer is empty. Note that the same values of "first_idx" and "next_idx" might also mean that the buffer is full. If the buffer is empty, we must respect the current position of the indexes. We cannot reset them to the beginning of the buffer. Otherwise, the functions reading the buffer would get crazy. The question is what to do when the message is too long. This patch uses the easiest solution and just ignores the problematic message. Let's do something better in a followup patch. Signed-off-by:
-
Petr Mladek authored
The check for free space in the log buffer always passes when "first_seq" and "next_seq" are equal. In theory, it might cause writing outside of the log buffer. Fortunately, the current usage looks safe because the used "text" and "dict" buffers are quite limited. See the second patch for more details. Anyway, it is better to be on the safe side and add a check. An easy solution is done in the 2nd patch and it is improved in the 4th patch. 5th patch fixes the computation of the printed message length. 1st and 3rd patches just do some code refactoring to make the other patches easier. This patch (of 5): There will be needed some fixes in the check for free space. They will be easier if the code is moved outside of the quite long log_store() function. This patch does not change the existing behavior. Signed-off-by:
-
Kirill A. Shutemov authored
Nobody seems uses it for a long time. Let's drop it. Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Fabian Frederick authored
sysctl_hung_task_panic has been changed to unsigned int. use kstrtouint instead of obsolete simple_strtoul Signed-off-by:
-
Fabian Frederick authored
Also fixes checkpatch warnings on proc_dostring function parameters Signed-off-by:
-
Fabian Frederick authored
Replace obsolete function. kstrtoint is used as reboot_cpu is an integer. Signed-off-by:
-
Fabian Frederick authored
[akpm@linux-foundation.org: don't overwrite kstrtoull()'s errno] Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
This patch also fixes one function declaration over 80 characters. Signed-off-by:
-
Fabian Frederick authored
Fix checkpatch warnings about EXPORT_SYMBOL and return() Signed-off-by:
-
Fabian Frederick authored
- EXPORT_SYMBOL - typo: unexpectidly->unexpectedly - function prototype over 80 characters Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
no level printk converted to pr_warn (if err) no level printk converted to pr_info (disabling non-boot cpus) Other printk converted to respective level. Signed-off-by:
-
James Hogan authored
Usually, BUG_ON and friends aren't even evaluated in sparse, but recently compiletime_assert_atomic_type() was added, and that now results in a sparse warning every time it is used. The reason turns out to be the temporary variable, after it sparse no longer considers the value to be a constant, and results in a warning and an error. The error is the more annoying part of this as it suppresses any further warnings in the same file, hiding other problems. Unfortunately the condition cannot be simply expanded out to avoid the temporary variable since it breaks compiletime_assert on old versions of GCC such as GCC 4.2.4 which the latest metag compiler is based on. Therefore #ifndef __CHECKER__ out the __compiletime_error_fallback which uses the potentially negative size array to trigger a conditional compiler error, so that sparse doesn't see it. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Daniel Santos <daniel.santos@pobox.com> Cc: Luciano Coelho <luciano.coelho@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
