- 28 May, 2015 4 commits
-
-
Kalle Valo authored
Merge tag 'iwlwifi-for-kalle-2015-05-28' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes * fix OTP parsing 8260 * fix powersave handling for 8260
-
Arend van Spriel authored
The function brcmf_msgbuf_get_pktid() may return a NULL pointer so the callers should check the return pointer before accessing it to avoid the crash below (see [1]): brcmfmac: brcmf_msgbuf_get_pktid: Invalid packet id 273 (not in use) BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 IP: [<ffffffff8145b225>] skb_pull+0x5/0x50 PGD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: pci_stub vboxpci(O) vboxnetflt(O) vboxnetadp(O) vboxdrv(O) snd_hda_codec_hdmi bnep mousedev hid_generic ushwmon msr ext4 crc16 mbcache jbd2 sd_mod uas usb_storage ahci libahci libata scsi_mod xhci_pci xhci_hcd usbcore usb_common CPU: 0 PID: 1661 Comm: irq/61-brcmf_pc Tainted: G O 4.0.1-MacbookPro-ARCH #1 Hardware name: Apple Inc. MacBookPro12,1/Mac-E43C1C25D4880AD6, BIOS MBP121.88Z.0167.B02.1503241251 03/24/2015 task: ffff880264203cc0 ti: ffff88025ffe4000 task.ti: ffff88025ffe4000 RIP: 0010:[<ffffffff8145b225>] [<ffffffff8145b225>] skb_pull+0x5/0x50 RSP: 0018:ffff88025ffe7d40 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff88008a33c000 RCX: 0000000000000044 RDX: 0000000000000000 RSI: 000000000000004a RDI: 0000000000000000 RBP: ffff88025ffe7da8 R08: 0000000000000096 R09: 000000000000004a R10: 0000000000000000 R11: 000000000000048e R12: ffff88025ff14f00 R13: 0000000000000000 R14: ffff880263b48200 R15: ffff88008a33c000 FS: 0000000000000000(0000) GS:ffff88026ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000080 CR3: 000000000180b000 CR4: 00000000003407f0 Stack: ffffffffa06aed74 ffff88025ffe7dc8 ffff880263b48270 ffff880263b48278 05ea88020000004a 0002ffff81014635 000000001720b2f6 ffff88026ec116c0 ffff880263b48200 0000000000010000 ffff880263b4ae00 ffff880264203cc0 Call Trace: [<ffffffffa06aed74>] ? brcmf_msgbuf_process_rx+0x404/0x480 [brcmfmac] [<ffffffff810cea60>] ? irq_finalize_oneshot.part.30+0xf0/0xf0 [<ffffffffa06afb55>] brcmf_proto_msgbuf_rx_trigger+0x35/0xf0 [brcmfmac] [<ffffffffa06baf2a>] brcmf_pcie_isr_thread_v2+0x8a/0x130 [brcmfmac] [<ffffffff810cea80>] irq_thread_fn+0x20/0x50 [<ffffffff810ceddf>] irq_thread+0x13f/0x170 [<ffffffff810cebf0>] ? wake_threads_waitq+0x30/0x30 [<ffffffff810ceca0>] ? irq_thread_dtor+0xb0/0xb0 [<ffffffff81092a08>] kthread+0xd8/0xf0 [<ffffffff81092930>] ? kthread_create_on_node+0x1c0/0x1c0 [<ffffffff8156d898>] ret_from_fork+0x58/0x90 [<ffffffff81092930>] ? kthread_create_on_node+0x1c0/0x1c0 Code: 01 83 e2 f7 88 50 01 48 83 c4 08 5b 5d f3 c3 0f 1f 80 00 00 00 00 83 e2 f7 88 50 01 c3 66 0f 1f 84 00 00 00 00 00 0f 1f RIP [<ffffffff8145b225>] skb_pull+0x5/0x50 RSP <ffff88025ffe7d40> CR2: 0000000000000080 ---[ end trace b074c0f90e7c997d ]--- [1] http://mid.gmane.org/20150430193259.GA5630@googlemail.com Cc: <stable@vger.kernel.org> # v3.18, v3.19, v4.0, v4.1 Reported-by: Michael Hornung <mhornung.linux@gmail.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Liad Kaufman authored
The radio cfg DWORD was taken from the wrong place in the 8000 HW family, after a line in the code was wrongly changed by mistake. This broke several 8260 devices. Fixes: 5dd9c68a ("iwlwifi: drop support for early versions of 8000") Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Ilan Peer authored
The cmd_in_flight tracking was introduced to workaround faulty power management hardware, by having the driver keep the NIC awake as long as there are commands in flight. However, some of the code handling this workaround was unconditionally executed, which resulted with an inconsistent state where the driver assumed that the NIC was awake although it wasn't. Fix this by renaming 'cmd_in_flight' to 'cmd_hold_nic_awake' and handling the NIC requested awake state only for hardwares for which the workaround is needed. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
- 22 May, 2015 1 commit
-
-
Kalle Valo authored
Merge tag 'iwlwifi-for-kalle-2015-05-21' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes * fix firmware name and other things to enable 3165 * fix bad APMG configuration for 8000 (no AMPG on these devices) * fix MAC address assignment for 8000 * fix firmware debugging triggers (MLME) * fix several bugs in low power states code (net-detect, d0i3)
-
- 21 May, 2015 6 commits
-
-
Eliad Peller authored
qos_seq points (to a struct) inside the command response data. Make sure to free the response only after qos_seq is not needed anymore. Reported-by: Heng Luo <heng.luo@intel.com> Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Luciano Coelho authored
If the device is reset during suspend with net-detect enabled, we leave the net-detect information dangling and this causes the next suspend to fail with a warning: [21795.351010] WARNING: at /root/iwlwifi/iwlwifi-stack-dev/drivers/net/wireless/iwlwifi/mvm/d3.c:989 __iwl_mvm_suspend.isra.6+0x2be/0x460 [iwlmvm]() [21795.353253] Modules linked in: iwlmvm(O) iwlwifi(O) mac80211(O) cfg80211(O) compat(O) [...] [21795.366168] CPU: 1 PID: 3645 Comm: bash Tainted: G O 3.10.29-dev #1 [21795.368785] Hardware name: Dell Inc. Latitude E6430/0CPWYR, BIOS A09 12/13/2012 [21795.371441] f8ec6748 f8ec6748 e51f3ce8 c168aa62 e51f3d10 c103a824 c1871238 f8ec6748 [21795.374228] 000003dd f8eb982e f8eb982e 00000000 c3408ed4 c41edbbc e51f3d20 c103a862 [21795.377006] 00000009 00000000 e51f3da8 f8eb982e c41ee3dc 00000004 e7970000 e51f3d74 [21795.379792] Call Trace: [21795.382461] [<c168aa62>] dump_stack+0x16/0x18 [21795.385133] [<c103a824>] warn_slowpath_common+0x64/0x80 [21795.387803] [<f8eb982e>] ? __iwl_mvm_suspend.isra.6+0x2be/0x460 [iwlmvm] [21795.390485] [<f8eb982e>] ? __iwl_mvm_suspend.isra.6+0x2be/0x460 [iwlmvm] [21795.393124] [<c103a862>] warn_slowpath_null+0x22/0x30 [21795.395787] [<f8eb982e>] __iwl_mvm_suspend.isra.6+0x2be/0x460 [iwlmvm] [21795.398464] [<f8eb9d7c>] iwl_mvm_suspend+0xec/0x140 [iwlmvm] [21795.401127] [<c104be11>] ? del_timer_sync+0xa1/0xc0 [21795.403800] [<f8d4107e>] __ieee80211_suspend+0x1de/0xff0 [mac80211] [21795.406459] [<c168e43d>] ? mutex_lock_nested+0x25d/0x350 [21795.409084] [<c1586b64>] ? rtnl_lock+0x14/0x20 [21795.411685] [<f8cf0076>] ieee80211_suspend+0x16/0x20 [mac80211] [21795.414318] [<f8c4e014>] wiphy_suspend+0x74/0x710 [cfg80211] [21795.416916] [<c141e612>] __device_suspend+0x1e2/0x220 [21795.419521] [<f8c4dfa0>] ? addresses_show+0xa0/0xa0 [cfg80211] [21795.422097] [<c141f997>] dpm_suspend+0x67/0x210 [21795.424661] [<c141fd6f>] dpm_suspend_start+0x4f/0x60 [21795.427219] [<c108d8e0>] suspend_devices_and_enter+0x60/0x480 [21795.429768] [<c168646a>] ? printk+0x4d/0x4f [21795.432295] [<c108de76>] pm_suspend+0x176/0x210 [21795.434830] [<c108ca5d>] state_store+0x5d/0xb0 [21795.437410] [<c108ca00>] ? wakeup_count_show+0x50/0x50 [21795.439961] [<c13208db>] kobj_attr_store+0x1b/0x30 [21795.442514] [<c11e3a4b>] sysfs_write_file+0xab/0x100 [21795.445088] [<c11e39a0>] ? sysfs_poll+0xa0/0xa0 [21795.447659] [<c1179655>] vfs_write+0xa5/0x1c0 [21795.450212] [<c1179af7>] SyS_write+0x57/0xa0 [21795.452699] [<c1699ec1>] sysenter_do_call+0x12/0x32 [21795.455146] ---[ end trace faf5321baba2bfdb ]--- To fix this, call the iwl_mvm_free_nd() function in case of any error during resume. Additionally, rename the "out_unlock" label to err to make it clearer that it's only called in error conditions. Cc: stable@vger.kernel.org [3.19+] Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Luciano Coelho authored
The __iwl_mvm_resume() function always returns 1, which causes mac80211 to do a reconfig with IEEE80211_RECONFIG_TYPE_RESTART. This type of reconfig calls iwl_mvm_restart_complete(), where we unref the IWL_MVM_REF_UCODE_DOWN, so we should always take the reference in this case. This prevents this kind of warning from happening: [40026.103025] WARNING: at /root/iwlwifi/iwlwifi-stack-dev/drivers/net/wireless/iwlwifi/mvm/mac80211.c:236 iwl_mvm_unref+0xc9/0xd0 [iwlmvm]() [40026.105145] Modules linked in: iwlmvm(O) iwlwifi(O) mac80211(O) cfg80211(O) compat(O) ctr ccm arc4 autofs4 snd_hda_codec_hdmi snd_hda_codec_idt joydev coretemp kvm_intel kvm aesni_intel ablk_helper cryptd lrw aes_i586 snd_hda_intel xts snd_hda_codec gf128mul snd_hwdep snd_pcm snd_seq_midi dell_wmi snd_rawmidi sparse_keymap snd_seq_midi_event snd_seq uvcvideo dell_laptop videobuf2_core dcdbas microcode videodev psmouse snd_timer videobuf2_vmalloc videobuf2_memops serio_raw snd_seq_device btusb i915 snd bluetooth lpc_ich drm_kms_helper soundcore snd_page_alloc drm i2c_algo_bit wmi parport_pc ppdev video binfmt_misc rpcsec_gss_krb5 nfsd mac_hid nfs_acl nfsv4 auth_rpcgss nfs fscache lockd sunrpc msdos lp parport sdhci_pci sdhci ahci libahci e1000e mmc_core ptp pps_core [last unloaded: compat] [40026.117640] CPU: 2 PID: 3827 Comm: bash Tainted: G W O 3.10.29-dev #1 [40026.120216] Hardware name: Dell Inc. Latitude E6430/0CPWYR, BIOS A09 12/13/2012 [40026.122815] f8effd18 f8effd18 e740fd18 c168aa62 e740fd40 c103a824 c1871238 f8effd18 [40026.125527] 000000ec f8ec79c9 f8ec79c9 d5d29ba4 d5d2a20c 00000000 e740fd50 c103a862 [40026.128209] 00000009 00000000 e740fd7c f8ec79c9 f1c591c4 00000400 00000000 f8efb490 [40026.130886] Call Trace: [40026.133506] [<c168aa62>] dump_stack+0x16/0x18 [40026.136115] [<c103a824>] warn_slowpath_common+0x64/0x80 [40026.138727] [<f8ec79c9>] ? iwl_mvm_unref+0xc9/0xd0 [iwlmvm] [40026.141319] [<f8ec79c9>] ? iwl_mvm_unref+0xc9/0xd0 [iwlmvm] [40026.143881] [<c103a862>] warn_slowpath_null+0x22/0x30 [40026.146453] [<f8ec79c9>] iwl_mvm_unref+0xc9/0xd0 [iwlmvm] [40026.149030] [<f8ec7a4d>] iwl_mvm_mac_reconfig_complete+0x7d/0x210 [iwlmvm] [40026.151645] [<f8b74b20>] ? ftrace_raw_event_drv_reconfig_complete+0xc0/0xe0 [mac80211] [40026.154291] [<f8b6769e>] ieee80211_reconfig+0x28e/0x2620 [mac80211] [40026.156920] [<c10ef0ea>] ? ring_buffer_unlock_commit+0xba/0x100 [40026.159585] [<f8b4a04d>] ieee80211_resume+0x6d/0x80 [mac80211] [40026.162206] [<f8a79722>] wiphy_resume+0x72/0x260 [cfg80211] [40026.164799] [<c141e2e7>] ? device_resume+0x57/0x150 [40026.167425] [<f8a796b0>] ? wiphy_suspend+0x710/0x710 [cfg80211] [40026.170075] [<c141e26e>] dpm_run_callback+0x2e/0x50 [40026.172695] [<c141e321>] device_resume+0x91/0x150 [40026.175334] [<c141f636>] dpm_resume+0xf6/0x200 [40026.177922] [<c141f920>] dpm_resume_end+0x10/0x20 [40026.180489] [<c108d9f7>] suspend_devices_and_enter+0x177/0x480 [40026.183037] [<c168646a>] ? printk+0x4d/0x4f [40026.185559] [<c108de76>] pm_suspend+0x176/0x210 [40026.188065] [<c108ca5d>] state_store+0x5d/0xb0 [40026.190581] [<c108ca00>] ? wakeup_count_show+0x50/0x50 [40026.193052] [<c13208db>] kobj_attr_store+0x1b/0x30 [40026.195608] [<c11e3a4b>] sysfs_write_file+0xab/0x100 [40026.198055] [<c11e39a0>] ? sysfs_poll+0xa0/0xa0 [40026.200469] [<c1179655>] vfs_write+0xa5/0x1c0 [40026.202893] [<c1179af7>] SyS_write+0x57/0xa0 [40026.205245] [<c1699ec1>] sysenter_do_call+0x12/0x32 [40026.207619] ---[ end trace db1d5a72a0381b0a ]--- Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: EliadX Peller <eliad@wizery.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Emmanuel Grumbach authored
There are buses that can't handle ASYNC command without copying them. Duplicate the host command instead. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Liad Kaufman authored
Take the MAC address from the OTP even if one is present in the NVM, if that MAC address happens to be a reserved one. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Haim Dreyfuss authored
fw_status is the only pointer pointing to a block of memory allocated above and should be freed after use. Note: this come from Klockwork static analyzer. Cc: stable@vger.kernel.org [3.19+] Fixes: 2021a89d ("iwlwifi: mvm: treat netdetect wake up separately") Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
- 20 May, 2015 1 commit
-
-
Rafał Miłecki authored
Recent fix for BCM4704 reboots has to be extended as the same problem affects Linksys WRT350N v1 (BCM4705). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reported-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
- 15 May, 2015 3 commits
-
-
Emmanuel Grumbach authored
A few triggers have status = MLME_SUCCESS and they are still interesting. E.g. if we want to collect data upon deauth, the status will be MLME_SUCCESS. Fix that. Fixes: d42f5350 ("iwlwifi: mvm: add trigger for firmware dump upon MLME failures") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Avri Altman authored
Disabling the clocks is a standard procedure while stopping the device. On family 8000 however, disabling the bus master DMA clock increases the NIC's power consumption. To fix this, skip this call if the device family is IWL_DEVICE_FAMILY_8000. Signed-off-by: Avri Altman <avri.altman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Emmanuel Grumbach authored
3165 really needs to load iwlwifi-7265D-13.ucode. This device is supported starting from -13.ucode, update the MIN and OK defines accordingly. While at it, add 3165 to the device list in the Kconfig file. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
- 10 May, 2015 1 commit
-
-
Emmanuel Grumbach authored
There are devices that forbid MIMO by the mean of the NVM. Detect thoses devices and forbid MIMO otherwise the firmware would crash. STBC is still allowed on these devices. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
- 03 May, 2015 2 commits
-
-
Lorenzo Bianconi authored
Do not use ieee80211_vif pointer in ath_get_rate_txpower() since it has been overwritten by setup_frame_info() and it will result in a corrupted tx power configuration. Set per-packet tx power in setup_frame_info() according to current vif tx power. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Kalle Valo authored
Merge tag 'iwlwifi-for-kalle-2015-04-28' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes * fix firmware API for -13.ucode * fix RSSI handling that avoid bad roaming decision * fix firmware debug * fix MFUART operation * fix ASSERT while restart the hardware (because of another ASSERT e.g)
-
- 28 Apr, 2015 7 commits
-
-
Johannes Berg authored
During firmware restart, the quota command isn't calculated multiple times, but after the firmware restart it has to be sent, so force it. Otherwise the firmware crashes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Emmanuel Grumbach authored
I forgot to rename the CPTCFG_ prefix... Fixes: 484b3d13 ("iwlwifi: mvm: add debugfs entry with the number of net-detect scans") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Eran Harary authored
Our device needs two different firmwares: the INIT firmware and the operational (OPER) firmware. The first one is run when the driver loads and it returns calibrations results as well as the NVM. The second one implements the WiFi protocol. If the wlan interface is not brought up, the device is put to low power state: no firmware will be running. When the interface is brought up, we would run the OPER firmware only and reuse the results of the run of the INIT firmware when the driver was loaded. This is changing with this patch. We now run the INIT firmware every time mac80211 calls start(). The penalty for that is minimal since the INIT firwmare run fast. I now also avoid to power down the device between the INIT and OPER firmware on certains buses. The motivation for this change is that there are components on the device (MFUART) that are triggered by the INIT firmware and need the device to be powered up in order to keep running. Powering the device down between the INIT and OPER firmware would stop these components and prevent them from running again since they are triggered by the INIT firmware only. The new flow allows this and also allows to trigger these components again when the interface is brought up after it has been brought down. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Larry Finger authored
The USB mini-driver in rtlwifi, which is used by rtl8192cu, issues a call to usb_control_msg() with a timeout value of 0. In some instances where the interface is shutting down, this infinite wait results in a CPU deadlock. A one second timeout fixes this problem without affecting any normal operations. This bug is reported at https://bugzilla.novell.com/show_bug.cgi?id=927786. Reported-by: Bernhard Wiedemann <bwiedemann@suse.com> Tested-by: Bernhard Wiedemann <bwiedemann@suse.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Cc: Bernhard Wiedemann <bwiedemann@suse.com> Cc: Takashi Iwai<tiwai@suse.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, they are: 1) Fix a crash in nf_tables when dictionaries are used from the ruleset, due to memory corruption, from Florian Westphal. 2) Fix another crash in nf_queue when used with br_netfilter. Also from Florian. Both fixes are related to new stuff that got in 4.0-rc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexei Starovoitov authored
ALU64_DIV instruction should be dividing 64-bit by 64-bit, whereas do_div() does 64-bit by 32-bit divide. x64 and arm64 JITs correctly implement 64 by 64 unsigned divide. llvm BPF backend emits code assuming that ALU64_DIV does 64 by 64. Fixes: 89aa0758 ("net: sock: allow eBPF programs to be attached to sockets") Reported-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Karicheri, Muralidharan authored
Currently when interface type is MAC to Phy, netif_carrier_(on/off) is called which is not needed as Phy lib already updates the carrier status to net stack. This is needed only for other interface types Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 27 Apr, 2015 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) mlx4 doesn't check fully for supported valid RSS hash function, fix from Amir Vadai 2) Off by one in ibmveth_change_mtu(), from David Gibson 3) Prevent altera chip from reporting false error interrupts in some circumstances, from Chee Nouk Phoon 4) Get rid of that stupid endless loop trying to allocate a FIN packet in TCP, and in the process kill deadlocks. From Eric Dumazet 5) Fix get_rps_cpus() crash due to wrong invalid-cpu value, also from Eric Dumazet 6) Fix two bugs in async rhashtable resizing, from Thomas Graf 7) Fix topology server listener socket namespace bug in TIPC, from Ying Xue 8) Add some missing HAS_DMA kconfig dependencies, from Geert Uytterhoeven 9) bgmac driver intends to force re-polling but does so by returning the wrong value from it's ->poll() handler. Fix from Rafał Miłecki 10) When the creater of an rhashtable configures a max size for it, don't bark in the logs and drop insertions when that is exceeded. Fix from Johannes Berg 11) Recover from out of order packets in ppp mppe properly, from Sylvain Rochet * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits) bnx2x: really disable TPA if 'disable_tpa' option is set net:treewide: Fix typo in drivers/net net/mlx4_en: Prevent setting invalid RSS hash function mdio-mux-gpio: use new gpiod_get_array and gpiod_put_array functions netfilter; Add some missing default cases to switch statements in nft_reject. ppp: mppe: discard late packet in stateless mode ppp: mppe: sanity error path rework net/bonding: Make DRV macros private net: rfs: fix crash in get_rps_cpus() altera tse: add support for fixed-links. pxa168: fix double deallocation of managed resources net: fix crash in build_skb() net: eth: altera: Resolve false errors from MSGDMA to TSE ehea: Fix memory hook reference counting crashes net/tg3: Release IRQs on permanent error net: mdio-gpio: support access that may sleep inet: fix possible panic in reqsk_queue_unlink() rhashtable: don't attempt to grow when at max_size bgmac: fix requests for extra polling calls from NAPI tcp: avoid looping in tcp_send_fin() ...
-
Michal Schmidt authored
bnx2x's 'disable_tpa=1' module option is not respected properly and TPA (transparent packet aggregation) remains enabled. Even though the module option causes LRO to be disabled, TPA is enabled in GRO mode. Additionally, disabling GRO via ethtool then has no effect. One can still observe tpa_* statistics increase and large packets being received in tcpdump. The bug was an unintended consequence of commit aebf6244 "bnx2x: Be more forgiving toward SW GRO". Fix it by following the bp->disable_tpa flag when initializing fp's. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Masanari Iida authored
This patch fix spelling typo in printk. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
mlx4_en_check_rxfh_func() was checking for hardware support before setting a known RSS hash function, but didn't do any check before setting unknown RSS hash function. Need to make it fail on such values. In this occasion, moved the actual setting of the new value from the check function into mlx4_en_set_rxfh(). Fixes: 947cbb0a ("net/mlx4_en: Support for configurable RSS hash function") Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rojhalat Ibrahim authored
Use the new gpiod_get_array and gpiod_put_array functions (added to mainline in the v4.1 merge window) for obtaining and disposing of GPIO descriptors. Cc: David Miller <davem@davemloft.net> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This fixes: ==================== net/netfilter/nft_reject.c: In function ‘nft_reject_dump’: net/netfilter/nft_reject.c:61:2: warning: enumeration value ‘NFT_REJECT_TCP_RST’ not handled in switch [-Wswitch] switch (priv->type) { ^ net/netfilter/nft_reject.c:61:2: warning: enumeration value ‘NFT_REJECT_ICMPX_UNREACH’ not handled in switch [-Wswi\ tch] net/netfilter/nft_reject_inet.c: In function ‘nft_reject_inet_dump’: net/netfilter/nft_reject_inet.c:105:2: warning: enumeration value ‘NFT_REJECT_TCP_RST’ not handled in switch [-Wswi\ tch] switch (priv->type) { ^ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sylvain Rochet says: ==================== ppp: mppe: fixes MPPE desync on links which don't guarantee packet ordering I am currently having an issue with PPP over L2TP (UDP) and MPPE in stateless mode (default mode), UDP does not guarantee packet ordering so we might get out of order packet. MPPE needs to be continuously synched so we should drop late UDP packet. I added a printk on the number of time we rekeyed in MPPE decompressor, this is what we currently have if we receive a slightly out of order UDP packet: [1731001.049206] mppe_decompress[1]: ccount 1559 [1731001.049216] mppe_decompress[1]: rekeyed 1 times [1731001.049228] mppe_decompress[1]: ccount 1560 [1731001.049232] mppe_decompress[1]: rekeyed 1 times [1731001.050170] mppe_decompress[1]: ccount 1562 [1731001.050182] mppe_decompress[1]: rekeyed 2 times [1731001.050191] mppe_decompress[1]: ccount 1561 [1731001.062576] mppe_decompress[1]: rekeyed 4095 times ^^^^ This is obviously wrong, we missed packet 1561 and we already rekeyed 2 times for 1562 we previously received, we can't recover the decryption key we need for 1561, we should drop it instead of rekeying 4095 times. This patch series drop any packet with are not within the 4096/2 forward window. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sylvain Rochet authored
When PPP is used over a link which does not guarantee packet ordering, we might get late MPPE packets. This is a problem because MPPE must be kept synchronized and the current implementation does not drop them and rekey 4095 times instead of 0, which is wrong. In order to prevent rekeying about a whole count space times (~ 4095 times), drop packets which are not within the forward 4096/2 window and increase sanity error counter. Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sylvain Rochet authored
We are going to need sanity error path a little further, rework to be able to use the sanity error path anywhere in decompressor. Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matan Barak authored
The bonding modules currently defines four macros with general names that pollute the global namespace: DRV_VERSION DRV_RELDATE DRV_NAME DRV_DESCRIPTION Fixing that by defining a private bonding_priv.h header files which includes those defines. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
-
Andy Lutomirski authored
AMD CPUs don't reinitialize the SS descriptor on SYSRET, so SYSRET with SS == 0 results in an invalid usermode state in which SS is apparently equal to __USER_DS but causes #SS if used. Work around the issue by setting SS to __KERNEL_DS __switch_to, thus ensuring that SYSRET never happens with SS set to NULL. This was exposed by a recent vDSO cleanup. Fixes: e7d6eefa x86/vdso32/syscall.S: Do not load __USER32_DS to %ss Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Peter Anvin <hpa@zytor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Brian Gerst <brgerst@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull intel drm fixes from Dave Airlie. * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: vlv: fix save/restore of GFX_MAX_REQ_COUNT reg drm/i915: Workaround to avoid lite restore with HEAD==TAIL drm/i915: cope with large i2c transfers
-
git://git.infradead.org/intel-iommuLinus Torvalds authored
Pull intel iommu updates from David Woodhouse: "This lays a little of the groundwork for upcoming Shared Virtual Memory support — fixing some bogus #defines for capability bits and adding the new ones, and starting to use the new wider page tables where we can, in anticipation of actually filling in the new fields therein. It also allows graphics devices to be assigned to VM guests again. This got broken in 3.17 by disallowing assignment of RMRR-afflicted devices. Like USB, we do understand why there's an RMRR for graphics devices — and unlike USB, it's actually sane. So we can make an exception for graphics devices, just as we do USB controllers. Finally, tone down the warning about the X2APIC_OPT_OUT bit, due to persistent requests. X2APIC_OPT_OUT was added to the spec as a nasty hack to allow broken BIOSes to forbid us from using X2APIC when they do stupid and invasive things and would break if we did. Someone noticed that since Windows doesn't have full IOMMU support for DMA protection, setting the X2APIC_OPT_OUT bit made Windows avoid initialising the IOMMU on the graphics unit altogether. This means that it would be available for use in "driver mode", where the IOMMU registers are made available through a BAR of the graphics device and the graphics driver can do SVM all for itself. So they started setting the X2APIC_OPT_OUT bit on *all* platforms with SVM capabilities. And even the platforms which *might*, if the planets had been aligned correctly, possibly have had SVM capability but which in practice actually don't" * git://git.infradead.org/intel-iommu: iommu/vt-d: support extended root and context entries iommu/vt-d: Add new extended capabilities from v2.3 VT-d specification iommu/vt-d: Allow RMRR on graphics devices too iommu/vt-d: Print x2apic opt out info instead of printing a warning iommu/vt-d: kill bogus ecap_niotlb_iunits()
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "This has a mixture of merge window cleanups and bugfixes" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: st: add include for pinctrl i2c: mux: use proper dev when removing "channel-X" symlinks i2c: digicolor: remove duplicate include i2c: Mark adapter devices with pm_runtime_no_callbacks i2c: pca-platform: fix broken email address i2c: mxs: fix broken email address i2c: rk3x: report number of messages transmitted
-