- 21 Oct, 2019 38 commits
-
-
Christoph Hellwig authored
This will allow optimizing various locking cycles in the following patches. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Brian Foster <bfoster@redhat.com>
-
Christoph Hellwig authored
ic_io_size is only used inside xlog_write_iclog, where we can just use the count parameter intead. Signed-off-by:
-
Christoph Hellwig authored
xlog_write_iclog expects a bool for the second argument. While any non-0 value happens to work fine this makes all calls consistent. Signed-off-by:
-
Brian Foster authored
The near mode fallback algorithm consists of a left/right scan of the bnobt. This algorithm has very poor breakdown characteristics under worst case free space fragmentation conditions. If a suitable extent is far enough from the locality hint, each allocation may scan most or all of the bnobt before it completes. This causes pathological behavior and extremely high allocation latencies. While locality is important to near mode allocations, it is not so important as to incur pathological allocation latency to provide the asolute best available locality for every allocation. If the allocation is large enough or far enough away, there is a point of diminishing returns. As such, we can bound the overall operation by including an iterative cntbt lookup in the broader search. The cntbt lookup is optimized to immediately find the extent with best locality for the given size on each iteration. Since the cntbt is indexed by extent size, the lookup repeats with a variably aggressive increasing search key size until it runs off the edge of the tree. This approach provides a natural balance between the two algorithms for various situations. For example, the bnobt scan is able to satisfy smaller allocations such as for inode chunks or btree blocks more quickly where the cntbt search may have to search through a large set of extent sizes when the search key starts off small relative to the largest extent in the tree. On the other hand, the cntbt search more deterministically covers the set of suitable extents for larger data extent allocation requests that the bnobt scan may have to search the entire tree to locate. Signed-off-by:
-
Brian Foster authored
Lift the btree fixup path into a helper function. Signed-off-by:
-
Brian Foster authored
In preparation to enhance the near mode allocation bnobt scan algorithm, lift it into a separate function. No functional changes. Signed-off-by:
-
Brian Foster authored
The bnobt "find best" helper implements a simple btree walker function. This general pattern, or a subset thereof, is reused in various parts of a near mode allocation operation. For example, the bnobt left/right scans are each iterative btree walks along with the cntbt lastblock scan. Rework this function into a generic btree walker, add a couple parameters to control termination behavior from various contexts and reuse it where applicable. Signed-off-by:
-
Brian Foster authored
Both algorithms duplicate the same btree allocation code. Eliminate the duplication and reuse the fallback algorithm codepath. Signed-off-by:
-
Brian Foster authored
The near mode bnobt scan searches left and right in the bnobt looking for the closest free extent to the allocation hint that satisfies minlen. Once such an extent is found, the left/right search terminates, we search one more time in the opposite direction and finish the allocation with the best overall extent. The left/right and find best searches are currently controlled via a combination of cursor state and local variables. Clean up this code and prepare for further improvements to the near mode fallback algorithm by reusing the allocation cursor best extent tracking mechanism. Update the tracking logic to deactivate bnobt cursors when out of allocation range and replace open-coded extent checks to calls to the common helper. In doing so, rename some misnamed local variables in the top-level near mode allocation function. Signed-off-by:
-
Brian Foster authored
The cntbt lastblock scan checks the size, alignment, locality, etc. of each free extent in the block and compares it with the current best candidate. This logic will be reused by the upcoming optimized cntbt algorithm, so refactor it into a separate helper. Note that acur->diff is now initialized to -1 (unsigned) instead of 0 to support the more granular comparison logic in the new helper. Signed-off-by:
-
Brian Foster authored
If the size lookup lands in the last block of the by-size btree, the near mode algorithm scans the entire block for the extent with best available locality. In preparation for similar best available extent tracking across both btrees, extend the allocation cursor with best extent data and lift the associated state from the cntbt last block scan code. No functional changes. Signed-off-by:
-
Brian Foster authored
Extend the allocation cursor to track extent busy state for an allocation attempt. No functional changes. Signed-off-by:
-
Brian Foster authored
Introduce a new allocation cursor data structure to encapsulate the various states and structures used to perform an extent allocation. This structure will eventually be used to track overall allocation state across different search algorithms on both free space btrees. To start, include the three btree cursors (one for the cntbt and two for the bnobt left/right search) used by the near mode allocation algorithm and refactor the cursor setup and teardown code into helpers. This slightly changes cursor memory allocation patterns, but otherwise makes no functional changes to the allocation algorithm. Signed-off-by:
-
Brian Foster authored
The upcoming allocation algorithm update searches multiple allocation btree cursors concurrently. As such, it requires an active state to track when a particular cursor should continue searching. While active state will be modified based on higher level logic, we can define base functionality based on the result of allocation btree lookups. Define an active flag in the private area of the btree cursor. Update it based on the result of lookups in the existing allocation btree helpers. Finally, provide a new helper to query the current state. Signed-off-by:
-
Christoph Hellwig authored
There is no point in applying extent size hints for always COW inodes, as we would just have to COW any extra allocation beyond the data actually written. Signed-off-by:
-
yu kuai authored
In commit d03a2f1b ("xfs: include WARN, REPAIR build options in XFS_BUILD_OPTIONS"), Eric pointed out that the XFS_BUILD_OPTIONS string, shown at module init time and in modinfo output, does not currently include all available build options. So, he added in CONFIG_XFS_WARN and CONFIG_XFS_REPAIR. However, this is not enough, add in CONFIG_XFS_QUOTA and CONFIG_XFS_ASSERT_FATAL. Signed-off-by:
yu kuai <yukuai3@huawei.com> Reviewed-by:
-
Goldwyn Rodrigues authored
The srcmap is used to identify where the read is to be performed from. It is passed to ->iomap_begin, which can fill it in if we need to read data for partially written blocks from a different location than the write target. The srcmap is only supported for buffered writes so far. Signed-off-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> [hch: merged two patches, removed the IOMAP_F_COW flag, use iomap as srcmap if not set, adjust length down to srcmap end as well] Signed-off-by:
-
Christoph Hellwig authored
Instead of keeping a separate unnamed state for uninitialized iomaps, renumber IOMAP_HOLE to zero so that an uninitialized iomap is treated as a hole. Suggested-by:
-
Christoph Hellwig authored
Use the existing iomap write_begin code to read the pages unshared by iomap_file_unshare. That avoids the extra ->readpage call and extent tree lookup currently done by read_mapping_page. Signed-off-by:
-
Christoph Hellwig authored
That keeps the function a little easier to understand, and easier to modify for pending enhancements. Signed-off-by:
-
Christoph Hellwig authored
xfs_file_dirty is used to unshare reflink blocks. Rename the function to xfs_file_unshare to better document that purpose, and skip iomaps that are not shared and don't need zeroing. This will allow to simplify the caller. Signed-off-by:
-
Christoph Hellwig authored
All callers pass AOP_FLAG_NOFS, so lift that flag to iomap_write_begin to allow reusing the flags arguments for an internal flags namespace soon. Also remove the local index variable that is only used once. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
Allison Collins <allison.henderson@oracle.com> Reviewed-by:
-
Christoph Hellwig authored
The documentation for IOMAP_F_* is a bit disorganized, and doesn't mention the fact that most flags are set by the file system and consumed by the iomap core, while IOMAP_F_SIZE_CHANGED is set by the core and consumed by the file system. Signed-off-by:
-
Darrick J. Wong authored
If we encounter an IO error during writeback, log the inode, offset, and sector number of the failure, instead of forcing the user to do some sort of reverse mapping to figure out which file is affected. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
-
Christoph Hellwig authored
No need to pass the full bio_vec. Signed-off-by:
-
Christoph Hellwig authored
Move the initialization of ia and ib to the declaration line and remove a superflous else. Signed-off-by:
-
Christoph Hellwig authored
Now that all the writepage code is in the iomap code there is no need to keep this structure public. Signed-off-by:
Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by:
-
Christoph Hellwig authored
And inline mapping should never mark the page dirty and thus never end up in writepages. Add a check for that condition and warn if it happens. Signed-off-by:
-
Christoph Hellwig authored
Take the xfs writeback code and move it to fs/iomap. A new structure with three methods is added as the abstraction from the generic writeback code to the file system. These methods are used to map blocks, submit an ioend, and cancel a page that encountered an error before it was added to an ioend. Signed-off-by:
-
Christoph Hellwig authored
Lift the xfs code for tracing address space operations to the iomap layer. Signed-off-by:
-
Christoph Hellwig authored
File systems like gfs2 don't support delayed allocations or unwritten extents and thus allocate normal mapped blocks to fill holes. To cover the case of such file systems allocating new blocks to fill holes also zero out mapped blocks with the new flag. Signed-off-by:
-
Christoph Hellwig authored
In preparation for moving the writeback code to iomap.c, replace the XFS-specific COW fork concept with the iomap IOMAP_F_SHARED flag. Signed-off-by:
-
Christoph Hellwig authored
In preparation for moving the ioend structure to common code we need to get rid of the xfs-specific xfs_trans type. Just make it a file system private void pointer instead. Signed-off-by:
-
Christoph Hellwig authored
Introduce two nicely abstracted helper, which can be moved to the iomap code later. Also use list_first_entry_or_null to simplify the code a bit. Signed-off-by:
-
Christoph Hellwig authored
In preparation for moving the XFS writeback code to fs/iomap.c, switch it to use struct iomap instead of the XFS-specific struct xfs_bmbt_irec. Signed-off-by:
-
Christoph Hellwig authored
Don't set IOMAP_F_NEW if we COW over an existing allocated range, as these aren't strictly new allocations. This is required to be able to use IOMAP_F_NEW to zero newly allocated blocks, which is required for the iomap code to fully support file systems that don't do delayed allocations or use unwritten extents. Signed-off-by:
-
Christoph Hellwig authored
Currently we don't overwrite the flags field in the iomap in xfs_bmbt_to_iomap. This works fine with 0-initialized iomaps on stack, but is harmful once we want to be able to reuse an iomap in the writeback code. Replace the shared parameter with a set of initial flags an thus ensures the flags field is always reinitialized. Signed-off-by:
-
- 17 Oct, 2019 1 commit
-
-
Dave Chinner authored
When doing a direct IO that spans the current EOF, and there are written blocks beyond EOF that extend beyond the current write, the only metadata update that needs to be done is a file size extension. However, we don't mark such iomaps as IOMAP_F_DIRTY to indicate that there is IO completion metadata updates required, and hence we may fail to correctly sync file size extensions made in IO completion when O_DSYNC writes are being used and the hardware supports FUA. Hence when setting IOMAP_F_DIRTY, we need to also take into account whether the iomap spans the current EOF. If it does, then we need to mark it dirty so that IO completion will call generic_write_sync() to flush the inode size update to stable storage correctly. Fixes: 3460cac1 ("iomap: Use FUA for pure data O_DSYNC DIO writes") Signed-off-by:
-
- 15 Oct, 2019 1 commit
-
-
Jan Kara authored
Use iomap_dio_rw() to wait for unaligned direct IO instead of opencoding the wait. Signed-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
-
