- 08 Apr, 2013 4 commits
-
-
Geoff Levand authored
The routines get_user_page_nowait(), kvm_io_bus_sort_cmp(), kvm_io_bus_insert_dev() and kvm_io_bus_get_first_dev() are only referenced within kvm_main.c, so give them static linkage. Fixes sparse warnings like these: virt/kvm/kvm_main.c: warning: symbol 'get_user_page_nowait' was not declared. Should it be static? Signed-off-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
Gleb Natapov <gleb@redhat.com>
-
Geoff Levand authored
The variables vm_list and kvm_lock are common to all architectures, so move the declarations from arch/x86/include/asm/kvm_host.h to include/linux/kvm_host.h. Fixes sparse warnings like these when building for arm64: virt/kvm/kvm_main.c: warning: symbol 'kvm_lock' was not declared. Should it be static? virt/kvm/kvm_main.c: warning: symbol 'vm_list' was not declared. Should it be static? Signed-off-by:
-
Jan Kiszka authored
The code was already properly aligned, now also add the braces to avoid that err is checked even if alloc_apic_access_page didn't run and change it. Found via Coccinelle by Fengguang Wu. Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
-
Yang Zhang authored
Free vmx_msr_bitmap_longmode_x2apic and vmx_msr_bitmap_longmode if kvm_init() fails. Signed-off-by:
Yang Zhang <yang.z.zhang@Intel.com> Signed-off-by:
-
- 07 Apr, 2013 5 commits
-
-
Michael S. Tsirkin authored
PIO and MMIO are separate address spaces, but ioeventfd registration code mistakenly detected two eventfds as duplicate if they use the same address, even if one is PIO and another one MMIO. Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Jan Kiszka authored
Obviously a copy&paste mistake: prepare_vmcs12 has to check L1's exit controls for VM_EXIT_SAVE_IA32_PAT. Signed-off-by:
-
Yang Zhang authored
For a given vcpu, kvm_apic_match_dest() will tell you whether the vcpu in the destination list quickly. Drop kvm_calculate_eoi_exitmap() and use kvm_apic_match_dest() instead. Signed-off-by:
-
Cornelia Huck authored
ccw_io_helper neglected to reset vcdev->err after a new channel program had been successfully started, resulting in stale errors delivered after one I/O failed. Reset the error after a new channel program has been successfully started with no old I/O pending. Signed-off-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
-
Takuya Yoshikawa authored
With the following commit, shadow pages can be zapped at random during a shadow page talbe walk: KVM: MMU: Move kvm_mmu_free_some_pages() into kvm_mmu_alloc_page() 7ddca7e4 This patch reverts it and fixes __direct_map() and FNAME(fetch)(). Signed-off-by:
Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by:
-
- 02 Apr, 2013 12 commits
-
-
Paolo Bonzini authored
In order to migrate the PMU state correctly, we need to restore the values of MSR_CORE_PERF_GLOBAL_STATUS (a read-only register) and MSR_CORE_PERF_GLOBAL_OVF_CTRL (which has side effects when written). We also need to write the full 40-bit value of the performance counter, which would only be possible with a v3 architectural PMU's full-width counter MSRs. To distinguish host-initiated writes from the guest's, pass the full struct msr_data to kvm_pmu_set_msr. Signed-off-by:
-
Nick Wang authored
Return KVM_USER_MEM_SLOTS in kvm_dev_ioctl_check_extension(). Signed-off-by:
Nick Wang <jfwang@us.ibm.com> Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Nick Wang authored
To model the standby memory with memory_region_add_subregion and friends, the guest would have one or more regions of ram. Remove the check allowing only one memory slot and the check requiring the real address of memory slot starts at zero. Signed-off-by:
-
Nick Wang authored
The current location for mapping virtio devices does not take into consideration the standby memory. This causes the failure of mapping standby memory since the location for the mapping is already taken by the virtio devices. To fix the problem, we move the location to beyond the end of standby memory. Signed-off-by:
-
Heiko Carstens authored
arch/s390/kvm/priv.c should include both linux/compat.h and asm/compat.h. Fixes this one: In file included from arch/s390/kvm/priv.c:23:0: arch/s390/include/asm/compat.h: In function ‘arch_compat_alloc_user_space’: arch/s390/include/asm/compat.h:258:2: error: implicit declaration of function ‘is_compat_task’ Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
In case of an exception the guest psw condition code should be left alone. Signed-off-by:
-
Heiko Carstens authored
kvm_s390_inject_program_int() and friends may fail if no memory is available. This must be reported to the calling functions, so that this gets passed down to user space which should fix the situation. Alternatively we end up with guest state corruption. So fix this and enforce return value checking by adding a __must_check annotation to all of these function prototypes. Signed-off-by:
-
Heiko Carstens authored
Being unable to parse the 5- and 8-line if statements I had to split them to be able to make any sense of them and verify that they match the architecture. So change the code since I guess that other people will also have a hard time parsing such long conditional statements with line breaks. Introduce a common is_valid_psw() function which does all the checks needed. In case of lpsw (64 bit psw -> 128 bit psw conversion) it will do some not needed additional checks, since a couple of bits can't be set anyway, but that doesn't hurt. Signed-off-by:
-
Heiko Carstens authored
kvm_s390_inject_program_int() may return with a non-zero return value, in case of an error (out of memory). Report that to the calling functions instead of ignoring the error case. Signed-off-by:
-
Heiko Carstens authored
When converting a 64 bit psw to a 128 bit psw the addressing mode bit of the "addr" part of the 64 bit psw must be moved to the basic addressing mode bit of the "mask" part of the 128 bit psw. In addition the addressing mode bit must be cleared when moved to the "addr" part of the 128 bit psw. Otherwise an invalid psw would be generated if the orginal psw was in the 31 bit addressing mode. Signed-off-by:
-
Heiko Carstens authored
When checking for validity the lpsw/lpswe handler check that only the lower 20 bits instead of 24 bits have a non-zero value. There handling valid psws as invalid ones. Fix the 24 bit psw mask. Signed-off-by:
-
Christian Borntraeger authored
Some memslot updates dont affect the gmap implementation, e.g. setting/unsetting dirty tracking. Since a gmap update will cause tlb flushes and segment table invalidations we want to avoid that. Signed-off-by:
-
- 24 Mar, 2013 1 commit
-
-
- 22 Mar, 2013 7 commits
-
-
Paul Mackerras authored
Currently kvmppc_core_dequeue_external() takes a struct kvm_interrupt * argument and does nothing with it, in any of its implementations. This removes it in order to make things easier for forthcoming in-kernel interrupt controller emulation code. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Scott Wood authored
Commit 523f0e54 ("KVM: PPC: E500: Explicitly mark shadow maps invalid") began using E500_TLB_VALID for guest TLB1 entries, and skipping invalidations if it's not set. However, when E500_TLB_VALID was set for such entries, it was on a fake local ref, and so the invalidations never happen. gtlb_privs is documented as being only for guest TLB0, though we already violate that with E500_TLB_BITMAP. Now that we have MMU notifiers, and thus don't need to actually retain a reference to the mapped pages, get rid of tlb_refs, and use gtlb_privs for E500_TLB_VALID in TLB1. Since we can have more than one host TLB entry for a given tlbe_ref, be careful not to clear existing flags that are relevant to other host TLB entries when preparing a new host TLB entry. Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Scott Wood authored
It's possible that we're using the same host TLB1 slot to map (a presumably different portion of) the same guest TLB1 entry. Clear the bit in the map before setting it, so that if the esels are the same the bit will remain set. Signed-off-by:
-
Scott Wood authored
Add one to esel values in h2g_tlb1_rmap, so that "no mapping" can be distinguished from "esel 0". Note that we're not saved by the fact that host esel 0 is reserved for non-KVM use, because KVM host esel numbering is not the raw host numbering (see to_htlb1_esel). Signed-off-by:
-
Bharat Bhushan authored
Installed debug handler will be used for guest debug support and debug facility emulation features (patches for these features will follow this patch). Signed-off-by:
Liu Yu <yu.liu@freescale.com> [bharat.bhushan@freescale.com: Substantial changes] Signed-off-by:
Bharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by:
-
Bharat Bhushan authored
If userspace wants to change some specific bits of TSR (timer status register) then it uses GET/SET_SREGS ioctl interface. So the steps will be: i) user-space will make get ioctl, ii) change TSR in userspace iii) then make set ioctl. It can happen that TSR gets changed by kernel after step i) and before step iii). To avoid this we have added below one_reg ioctls for oring and clearing specific bits in TSR. This patch adds one registerface for: 1) setting specific bit in TSR (timer status register) 2) clearing specific bit in TSR (timer status register) 3) setting/getting the TCR register. There are cases where we want to only change TCR and not TSR. Although we can uses SREGS without KVM_SREGS_E_UPDATE_TSR flag but I think one reg is better. I am open if someone feels we should use SREGS only here. 4) getting/setting TSR register Signed-off-by: -
Bharat Bhushan authored
This is done so that same function can be called from SREGS and ONE_REG interface (follow up patch). Signed-off-by:
-
- 21 Mar, 2013 3 commits
-
-
Takuya Yoshikawa authored
The current name "kvm_mmu_free_some_pages" should be used for something that actually frees some shadow pages, as we expect from the name, but what the function is doing is to make some, KVM_MIN_FREE_MMU_PAGES, shadow pages available: it does nothing when there are enough. This patch changes the name to reflect this meaning better; while doing this renaming, the code in the wrapper function is inlined into the main body since the whole function will be inlined into the only caller now. Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com>
-
Takuya Yoshikawa authored
What this function is doing is to ensure that the number of shadow pages does not exceed the maximum limit stored in n_max_mmu_pages: so this is placed at every code path that can reach kvm_mmu_alloc_page(). Although it might have some sense to spread this function in each such code path when it could be called before taking mmu_lock, the rule was changed not to do so. Taking this background into account, this patch moves it into kvm_mmu_alloc_page() and simplifies the code. Note: the unlikely hint in kvm_mmu_free_some_pages() guarantees that the overhead of this function is almost zero except when we actually need to allocate some shadow pages, so we do not need to care about calling it multiple times in one path by doing kvm_mmu_get_page() a few times. Signed-off-by:
-
Marcelo Tosatti authored
Merge reason: From: Alexander Graf <agraf@suse.de> "Just recently this really important patch got pulled into Linus' tree for 3.9: commit 1674400a Author: Anton Blanchard <anton <at> samba.org> Date: Tue Mar 12 01:51:51 2013 +0000 Without that commit, I can not boot my G5, thus I can't run automated tests on it against my queue. Could you please merge kvm/next against linus/master, so that I can base my trees against that?" * upstream/master: (653 commits) PCI: Use ROM images from firmware only if no other ROM source available sparc: remove unused "config BITS" sparc: delete "if !ULTRA_HAS_POPULATION_COUNT" KVM: Fix bounds checking in ioapic indirect register reads (CVE-2013-1798) KVM: x86: Convert MSR_KVM_SYSTEM_TIME to use gfn_to_hva_cache functions (CVE-2013-1797) KVM: x86: fix for buffer overflow in handling of MSR_KVM_SYSTEM_TIME (CVE-2013-1796) arm64: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORS arm64: Do not select GENERIC_HARDIRQS_NO_DEPRECATED inet: limit length of fragment queue hash table bucket lists qeth: Fix scatter-gather regression qeth: Fix invalid router settings handling qeth: delay feature trace sgy-cts1000: Remove __dev* attributes KVM: x86: fix deadlock in clock-in-progress request handling KVM: allow host header to be included even for !CONFIG_KVM hwmon: (lm75) Fix tcn75 prefix hwmon: (lm75.h) Update header inclusion MAINTAINERS: Remove Mark M. Hoffman xfs: ensure we capture IO errors correctly xfs: fix xfs_iomap_eof_prealloc_initial_size type ... Signed-off-by:
-
- 20 Mar, 2013 3 commits
-
-
Paolo Bonzini authored
The CS base was initialized to 0 on VMX (wrong, but usually overridden by userspace before starting) or 0xf0000 on SVM. The correct value is 0xffff0000, and VMX is able to emulate it now, so use it. Reviewed-by:
-
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull vfio fix from Alex Williamson. * tag 'vfio-v3.9-rc4' of git://github.com/awilliam/linux-vfio: vfio: include <linux/slab.h> for kmalloc
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Fix bounds checking in ioapic indirect register reads (CVE-2013-1798) KVM: x86: Convert MSR_KVM_SYSTEM_TIME to use gfn_to_hva_cache functions (CVE-2013-1797) KVM: x86: fix for buffer overflow in handling of MSR_KVM_SYSTEM_TIME (CVE-2013-1796) KVM: x86: fix deadlock in clock-in-progress request handling KVM: allow host header to be included even for !CONFIG_KVM
-
- 19 Mar, 2013 5 commits
-
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
Pull XFS fixes from Ben Myers: - Fix for a potential infinite loop which was introduced in commit 4d559a3b ("xfs: limit speculative prealloc near ENOSPC thresholds") - Fix for the return type of xfs_iomap_eof_prealloc_initial_size from commit a1e16c26 ("xfs: limit speculative prealloc size on sparse files") - Fix for a failed buffer readahead causing subsequent callers to fail incorrectly * tag 'for-linus-v3.9-rc4' of git://oss.sgi.com/xfs/xfs: xfs: ensure we capture IO errors correctly xfs: fix xfs_iomap_eof_prealloc_initial_size type xfs: fix potential infinite loop in xfs_iomap_prealloc_size()
-
Matthew Garrett authored
Mantas Mikulėnas reported that his graphics hardware failed to initialise after commit f9a37be0 ("x86: Use PCI setup data"). The aim of this commit was to ensure that ROM images were available on some Apple systems that don't expose the GPU ROM via any other source. In this case, UEFI appears to have provided a broken ROM image that we were using even though there was a perfectly valid ROM available via other sources. The simplest way to handle this seems to be to just re-order pci_map_rom() and leave any firmare-supplied ROM to last. Signed-off-by:
Matthew Garrett <matthew.garrett@nebula.com> Tested-by:
Mantas Mikulėnas <grawity@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc fixes from David Miller: "Just some minor fixups, a sunsu console setup panic cure, and recognition of a Fujitsu sun4v cpu." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: remove unused "config BITS" sparc: delete "if !ULTRA_HAS_POPULATION_COUNT" sparc64: correctly recognize SPARC64-X chips sparc,leon: fix GRPCI2 device0 PCI config space access sunsu: Fix panic in case of nonexistent port at "console=ttySY" cmdline option
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64Linus Torvalds authored
Pull arm64 fixes from Catalin Marinas: - Fix !SMP build error. - Fix padding computation in struct ucontext (no ABI change). - Minor clean-up after the signal patches (unused var). - Two old Kconfig options clean-up. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORS arm64: Do not select GENERIC_HARDIRQS_NO_DEPRECATED arm64: fix padding computation in struct ucontext arm64: Fix build error with !SMP arm64: Removed unused variable in compat_setup_rt_frame()
-
Paul Bolle authored
sparc's asm/module.h got removed in commit 786d35d4 ("Make most arch asm/module.h files use asm-generic/module.h"). That removed the only two uses of this Kconfig symbol. So we can remove its entry too. > >From arch/sparc/Makefile: > ifeq ($(CONFIG_SPARC32),y) > [...] > > [...] > export BITS := 32 > [...] > > else > [...] > > [...] > export BITS := 64 > [...] > > So $(BITS) is set depending on whether CONFIG_SPARC32 is set or not. > Using $(BITS) in sparc's Makefiles is not using CONFIG_BITS. That > doesn't count as usage of "config BITS". Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
