- 25 Jul, 2019 17 commits
-
-
Thomas Gleixner authored
The SDM states: "The destination shorthand field of the ICR allows the delivery mode to be by-passed in favor of broadcasting the IPI to all the processors on the system bus and/or back to itself (see Section 10.6.1, Interrupt Command Register (ICR)). Three destination shorthands are supported: self, all excluding self, and all including self. The destination mode is ignored when a destination shorthand is used." So there is no point to supply the destination mode to the shorthand delivery function. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20190722105220.094613426@linutronix.de
-
Thomas Gleixner authored
In order to support IPI/NMI broadcasting via the shorthand mechanism side effects of shorthands need to be mitigated: Shorthand IPIs and NMIs hit all CPUs including unplugged CPUs Neither of those can be handled on unplugged CPUs for obvious reasons. It would be trivial to just fully disable the APIC via the enable bit in MSR_APICBASE. But that's not possible because clearing that bit on systems based on the 3 wire APIC bus would require a hardware reset to bring it back as the APIC would lose track of bus arbitration. On systems with FSB delivery APICBASE could be disabled, but it has to be guaranteed that no interrupt is sent to the APIC while in that state and it's not clear from the SDM whether it still responds to INIT/SIPI messages. Therefore stay on the safe side and switch the APIC into soft disabled mode so it won't deliver any regular vector to the CPU. NMIs are still propagated to the 'dead' CPUs. To mitigate that add a check for the CPU being offline on early nmi entry and if so bail. Note, this cannot use the stop/restart_nmi() magic which is used in the alternatives code. A dead CPU cannot invoke nmi_enter() or anything else due to RCU and other reasons. Signed-off-by:
-
Thomas Gleixner authored
arch_smt_update() will be used to control IPI/NMI broadcasting via the shorthand mechanism. Keeping it in the bugs file and calling the apic function from there is possible, but not really intuitive. Move it to a neutral place and invoke the bugs function from there. No functional change. Signed-off-by:
-
Thomas Gleixner authored
Not used outside of the UV apic source. Signed-off-by:
-
Thomas Gleixner authored
Now there are three small local headers. Some contain functions which are only used in one source file. Move all the inlines and declarations into a single local header and the inlines which are only used in one source file into that. Signed-off-by:
-
Thomas Gleixner authored
Only used locally. Signed-off-by:
-
Thomas Gleixner authored
Only used locally. Signed-off-by:
-
Thomas Gleixner authored
All of these APIC files include the world and some more. Remove the unneeded cruft. Signed-off-by:
-
Thomas Gleixner authored
No point in having them in an header file. Signed-off-by:
-
Thomas Gleixner authored
In course of developing shorthand based IPI support issues with the function which tries to clear eventually pending ISR bits in the local APIC were observed. 1) O-day testing triggered the WARN_ON() in apic_pending_intr_clear(). This warning is emitted when the function fails to clear pending ISR bits or observes pending IRR bits which are not delivered to the CPU after the stale ISR bit(s) are ACK'ed. Unfortunately the function only emits a WARN_ON() and fails to dump the IRR/ISR content. That's useless for debugging. Feng added spot on debug printk's which revealed that the stale IRR bit belonged to the APIC timer interrupt vector, but adding ad hoc debug code does not help with sporadic failures in the field. Rework the loop so the full IRR/ISR contents are saved and on failure dumped. 2) The loop termination logic is interesting at best. If the machine has no TSC or cpu_khz is not known yet it tries 1 million times to ack stale IRR/ISR bits. What? With TSC it uses the TSC to calculate the loop termination. It takes a timestamp at entry and terminates the loop when: (rdtsc() - start_timestamp) >= (cpu_hkz << 10) That's roughly one second. Both methods are problematic. The APIC has 256 vectors, which means that in theory max. 256 IRR/ISR bits can be set. In practice this is impossible and the chance that more than a few bits are set is close to zero. With the pure loop based approach the 1 million retries are complete overkill. With TSC this can terminate too early in a guest which is running on a heavily loaded host even with only a couple of IRR/ISR bits set. The reason is that after acknowledging the highest priority ISR bit, pending IRRs must get serviced first before the next round of acknowledge can take place as the APIC (real and virtualized) does not honour EOI without a preceeding interrupt on the CPU. And every APIC read/write takes a VMEXIT if the APIC is virtualized. While trying to reproduce the issue 0-day reported it was observed that the guest was scheduled out long enough under heavy load that it terminated after 8 iterations. Make the loop terminate after 512 iterations. That's plenty enough in any case and does not take endless time to complete. Signed-off-by: -
Thomas Gleixner authored
If the APIC was already enabled on entry of setup_local_APIC() then disabling it soft via the SPIV register makes a lot of sense. That masks all LVT entries and brings it into a well defined state. Otherwise previously enabled LVTs which are not touched in the setup function stay unmasked and might surprise the just booting kernel. Signed-off-by:
-
Thomas Gleixner authored
If the APIC is soft disabled then unmasking an LVT entry does not work and the write is ignored. perf_events_lapic_init() tries to do so. Move the invocation after the point where the APIC has been enabled. Signed-off-by:
-
Thomas Gleixner authored
apic->send_IPI_allbutself() takes a vector number as argument. APIC_DM_NMI is clearly not a vector number. It's defined to 0x400 which is outside the vector space. Use NMI_VECTOR instead as that's what it is intended to be. Fixes: 82da3ff8 ("x86: kgdb support") Signed-off-by:
-
Thomas Gleixner authored
Pick up core changes on which the APIC IPI cleanups and shorthand support series depends on.
-
Grzegorz Halat authored
A reboot request sends an IPI via the reboot vector and waits for all other CPUs to stop. If one or more CPUs are in critical regions with interrupts disabled then the IPI is not handled on those CPUs and the shutdown hangs if native_stop_other_cpus() is called with the wait argument set. Such a situation can happen when one CPU was stopped within a lock held section and another CPU is trying to acquire that lock with interrupts disabled. There are other scenarios which can cause such a lockup as well. In theory the shutdown should be attempted by an NMI IPI after the timeout period elapsed. Though the wait loop after sending the reboot vector IPI prevents this. It checks the wait request argument and the timeout. If wait is set, which is true for sys_reboot() then it won't fall through to the NMI shutdown method after the timeout period has finished. This was an oversight when the NMI shutdown mechanism was added to handle the 'reboot IPI is not working' situation. The mechanism was added to deal with stuck panic shutdowns, which do not have the wait request set, so the 'wait request' case was probably not considered. Remove the wait check from the post reboot vector IPI wait loop and enforce that the wait loop in the NMI fallback path is invoked even if NMI IPIs are disabled or the registration of the NMI handler fails. That second wait loop will then hang if not all CPUs shutdown and the wait argument is set. [ tglx: Avoid the hard to parse line break in the NMI fallback path, add comments and massage the changelog ] Fixes: 7d007d21 ("x86/reboot: Use NMI to assist in shutting down if IRQ fails") Signed-off-by:
Grzegorz Halat <ghalat@redhat.com> Signed-off-by:
-
Thomas Gleixner authored
The IPI code of x86 needs to evaluate whether the target cpumask is equal to the cpu_online_mask or equal except for the calling CPU. To replace the current implementation which requires the usage of a temporary cpumask, which might involve allocations, add a new function which compares a cpumask to the result of two other cpumasks which are or'ed together before comparison. This allows to make the required decision in one go and the calling code then can check for the calling CPU being set in the target mask with cpumask_test_cpu(). Signed-off-by:
-
Thomas Gleixner authored
The booted once information which is required to deal with the MCE broadcast issue on X86 correctly is stored in the per cpu hotplug state, which is perfectly fine for the intended purpose. X86 needs that information for supporting NMI broadcasting via shortcuts, but retrieving it from per cpu data is cumbersome. Move it to a cpumask so the information can be checked against the cpu_present_mask quickly. No functional change intended. Signed-off-by:
-
- 23 Jul, 2019 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fixes from Helge Deller: - Fix build issues when kprobes are enabled - Speed up ITLB/DTLB cache flushes when running on machines with combined TLBs * 'parisc-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Flush ITLB in flush_tlb_all_local() only on split TLB machines parisc: add kprobe_fault_handler()
-
- 22 Jul, 2019 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull preemption Kconfig fix from Thomas Gleixner: "The PREEMPT_RT stub config renamed PREEMPT to PREEMPT_LL and defined PREEMPT outside of the menu and made it selectable by both PREEMPT_LL and PREEMPT_RT. Stupid me missed that 114 defconfigs select CONFIG_PREEMPT which obviously can't work anymore. oldconfig builds are affected as well, but it's more obvious as the user gets asked. [old]defconfig silently fixes it up and selects PREEMPT_NONE. Unbreak it by undoing the rename and adding a intermediate config symbol which is selected by both PREEMPT and PREEMPT_RT. That requires to chase down a few #ifdefs, but it's better than tweaking 114 defconfigs and annoying users" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt, Kconfig: Unbreak def/oldconfig with CONFIG_PREEMPT=y
-
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linuxLinus Torvalds authored
Pull pidfd polling fix from Christian Brauner: "A fix for pidfd polling. It ensures that the task's exit state is visible to all waiters" * tag 'for-linus-20190722' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: pidfd: fix a poll race when setting exit_state
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: - fixes for leaks caused by recently merged patches - one build fix - a fix to prevent mixing of incompatible features * tag 'for-5.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: don't leak extent_map in btrfs_get_io_geometry() btrfs: free checksum hash on in close_ctree btrfs: Fix build error while LIBCRC32C is module btrfs: inode: Don't compress if NODATASUM or NODATACOW set
-
Thomas Gleixner authored
The merge of the CONFIG_PREEMPT_RT stub renamed CONFIG_PREEMPT to CONFIG_PREEMPT_LL which causes all defconfigs which have CONFIG_PREEMPT=y set to fall back to CONFIG_PREEMPT_NONE because CONFIG_PREEMPT depends on the preemption mode choice wich defaults to NONE. This also affects oldconfig builds. So rather than changing 114 defconfig files and being an annoyance to users, revert the rename and select a new config symbol PREEMPTION. That keeps everything working smoothly and the revelant ifdef's are going to be fixed up step by step. Reported-by:
Mark Rutland <mark.rutland@arm.com> Fixes: a50a3f4b ("sched/rt, Kconfig: Introduce CONFIG_PREEMPT_RT") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "For two regressions in media core: - v4l2-subdev: fix regression in check_pad() - videodev2.h: change V4L2_PIX_FMT_BGRA444 define: fourcc was already in use" * tag 'media/v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: videodev2.h: change V4L2_PIX_FMT_BGRA444 define: fourcc was already in use media: v4l2-subdev: fix regression in check_pad() -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Several netfilter fixes including a nfnetlink deadlock fix from Florian Westphal and fix for dropping VRF packets from Miaohe Lin. 2) Flow offload fixes from Pablo Neira Ayuso including a fix to restore proper block sharing. 3) Fix r8169 PHY init from Thomas Voegtle. 4) Fix memory leak in mac80211, from Lorenzo Bianconi. 5) Missing NULL check on object allocation in cxgb4, from Navid Emamdoost. 6) Fix scaling of RX power in sfp phy driver, from Andrew Lunn. 7) Check that there is actually an ip header to access in skb->data in VRF, from Peter Kosyh. 8) Remove spurious rcu unlock in hv_netvsc, from Haiyang Zhang. 9) One more tweak the the TCP fragmentation memory limit changes, to be less harmful to applications setting small SO_SNDBUF values. From Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits) tcp: be more careful in tcp_fragment() hv_netvsc: Fix extra rcu_read_unlock in netvsc_recv_callback() vrf: make sure skb->data contains ip header to make routing connector: remove redundant input callback from cn_dev qed: Prefer pcie_capability_read_word() igc: Prefer pcie_capability_read_word() cxgb4: Prefer pcie_capability_read_word() be2net: Synchronize be_update_queues with dev_watchdog bnx2x: Prevent load reordering in tx completion processing net: phy: sfp: hwmon: Fix scaling of RX power net: sched: verify that q!=NULL before setting q->flags chelsio: Fix a typo in a function name allocate_flower_entry: should check for null deref net: hns3: typo in the name of a constant kbuild: add net/netfilter/nf_tables_offload.h to header-test blacklist. tipc: Fix a typo mac80211: don't warn about CW params when not using them mac80211: fix possible memory leak in ieee80211_assign_beacon nl80211: fix NL80211_HE_MAX_CAPABILITY_LEN nl80211: fix VENDOR_CMD_RAW_DATA ... -
Suren Baghdasaryan authored
There is a race between reading task->exit_state in pidfd_poll and writing it after do_notify_parent calls do_notify_pidfd. Expected sequence of events is: CPU 0 CPU 1 ------------------------------------------------ exit_notify do_notify_parent do_notify_pidfd tsk->exit_state = EXIT_DEAD pidfd_poll if (tsk->exit_state) However nothing prevents the following sequence: CPU 0 CPU 1 ------------------------------------------------ exit_notify do_notify_parent do_notify_pidfd pidfd_poll if (tsk->exit_state) tsk->exit_state = EXIT_DEAD This causes a polling task to wait forever, since poll blocks because exit_state is 0 and the waiting task is not notified again. A stress test continuously doing pidfd poll and process exits uncovered this bug. To fix it, we make sure that the task's exit_state is always set before calling do_notify_pidfd. Fixes: b53b0b9d ("pidfd: add polling support") Cc: kernel-team@android.com Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by:Suren Baghdasaryan <surenb@google.com> Signed-off-by:
Joel Fernandes (Google) <joel@joelfernandes.org> Link: https://lore.kernel.org/r/20190717172100.261204-1-joel@joelfernandes.org [christian@brauner.io: adapt commit message and drop unneeded changes from wait_task_zombie] Signed-off-by:
Christian Brauner <christian@brauner.io>
-
Andrew Cooper authored
There is a lot of infrastructure for functionality which is used exclusively in __{save,restore}_processor_state() on the suspend/resume path. cr8 is an alias of APIC_TASKPRI, and APIC_TASKPRI is saved/restored by lapic_{suspend,resume}(). Saving and restoring cr8 independently of the rest of the Local APIC state isn't a clever thing to be doing. Delete the suspend/resume cr8 handling, which shrinks the size of struct saved_context, and allows for the removal of both PVOPS. Signed-off-by:Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Link: https://lkml.kernel.org/r/20190715151641.29210-1-andrew.cooper3@citrix.com
-
Andy Lutomirski authored
The APIC, per spec, is fundamentally confused and thinks that interrupt vectors 16-31 are valid. This makes no sense -- the CPU reserves vectors 0-31 for exceptions (faults, traps, etc). Obviously, no device should actually produce an interrupt with vector 16-31, but robustness can be improved by setting the APIC TPR class to 1, which will prevent delivery of an interrupt with a vector below 32. Note: This is *not* intended as a security measure against attackers who control malicious hardware. Any PCI or similar hardware that can be controlled by an attacker MUST be behind a functional IOMMU that remaps interrupts. The purpose of this change is to reduce the chance that a certain class of device malfunctions crashes the kernel in hard-to-debug ways. Suggested-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
Eric Dumazet authored
Some applications set tiny SO_SNDBUF values and expect TCP to just work. Recent patches to address CVE-2019-11478 broke them in case of losses, since retransmits might be prevented. We should allow these flows to make progress. This patch allows the first and last skb in retransmit queue to be split even if memory limits are hit. It also adds the some room due to the fact that tcp_sendmsg() and tcp_sendpage() might overshoot sk_wmem_queued by about one full TSO skb (64KB size). Note this allowance was already present in stable backports for kernels < 4.15 Note for < 4.15 backports : tcp_rtx_queue_tail() will probably look like : static inline struct sk_buff *tcp_rtx_queue_tail(const struct sock *sk) { struct sk_buff *skb = tcp_send_head(sk); return skb ? tcp_write_queue_prev(sk, skb) : tcp_write_queue_tail(sk); } Fixes: f070ef2a ("tcp: tcp_fragment() should apply sane memory limits") Signed-off-by:Eric Dumazet <edumazet@google.com> Reported-by:
Andrew Prout <aprout@ll.mit.edu> Tested-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Tested-by:
Michal Kubecek <mkubecek@suse.cz> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Christoph Paasch <cpaasch@apple.com> Cc: Jonathan Looney <jtl@netflix.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Haiyang Zhang authored
There is an extra rcu_read_unlock left in netvsc_recv_callback(), after a previous patch that removes RCU from this function. This patch removes the extra RCU unlock. Fixes: 345ac089 ("hv_netvsc: pass netvsc_device to receive callback") Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
- 21 Jul, 2019 11 commits
-
-
Linus Torvalds authored
-
Peter Kosyh authored
vrf_process_v4_outbound() and vrf_process_v6_outbound() do routing using ip/ipv6 addresses, but don't make sure the header is available in skb->data[] (skb_headlen() is less then header size). Case: 1) igb driver from intel. 2) Packet size is greater then 255. 3) MPLS forwards to VRF device. So, patch adds pskb_may_pull() calls in vrf_process_v4/v6_outbound() functions. Signed-off-by:
Peter Kosyh <p.kosyh@gmail.com> Reviewed-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Vasily Averin authored
A small cleanup: this callback is never used. Originally fixed by Stanislav Kinsburskiy <skinsbursky@virtuozzo.com> for OpenVZ7 bug OVZ-6877 cc: stanislav.kinsburskiy@gmail.com Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
-
Frederick Lawler authored
Commit 8c0d3a02 ("PCI: Add accessors for PCI Express Capability") added accessors for the PCI Express Capability so that drivers didn't need to be aware of differences between v1 and v2 of the PCI Express Capability. Replace pci_read_config_word() and pci_write_config_word() calls with pcie_capability_read_word() and pcie_capability_write_word(). Signed-off-by:
Frederick Lawler <fred@fredlawl.com> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
-
Frederick Lawler authored
Commit 8c0d3a02 ("PCI: Add accessors for PCI Express Capability") added accessors for the PCI Express Capability so that drivers didn't need to be aware of differences between v1 and v2 of the PCI Express Capability. Replace pci_read_config_word() and pci_write_config_word() calls with pcie_capability_read_word() and pcie_capability_write_word(). Signed-off-by:
-
Frederick Lawler authored
Commit 8c0d3a02 ("PCI: Add accessors for PCI Express Capability") added accessors for the PCI Express Capability so that drivers didn't need to be aware of differences between v1 and v2 of the PCI Express Capability. Replace pci_read_config_word() and pci_write_config_word() calls with pcie_capability_read_word() and pcie_capability_write_word(). Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Benjamin Poirier authored
As pointed out by Firo Yang, a netdev tx timeout may trigger just before an ethtool set_channels operation is started. be_tx_timeout(), which dumps some queue structures, is not written to run concurrently with be_update_queues(), which frees/allocates those queues structures. Add some synchronization between the two. Message-id: <CH2PR18MB31898E033896F9760D36BFF288C90@CH2PR18MB3189.namprd18.prod.outlook.com> Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Signed-off-by:
-
Brian King authored
This patch fixes an issue seen on Power systems with bnx2x which results in the skb is NULL WARN_ON in bnx2x_free_tx_pkt firing due to the skb pointer getting loaded in bnx2x_free_tx_pkt prior to the hw_cons load in bnx2x_tx_int. Adding a read memory barrier resolves the issue. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Andrew Lunn authored
The RX power read from the SFP uses units of 0.1uW. This must be scaled to units of uW for HWMON. This requires a divide by 10, not the current 100. With this change in place, sensors(1) and ethtool -m agree: sff2-isa-0000 Adapter: ISA adapter in0: +3.23 V temp1: +33.1 C power1: 270.00 uW power2: 200.00 uW curr1: +0.01 A Laser output power : 0.2743 mW / -5.62 dBm Receiver signal average optical power : 0.2014 mW / -6.96 dBm Reported-by: chris.healy@zii.aero Signed-off-by:Andrew Lunn <andrew@lunn.ch> Fixes: 1323061a ("net: phy: sfp: Add HWMON support for module sensors") Signed-off-by:
-
Vlad Buslov authored
In function int tc_new_tfilter() q pointer can be NULL when adding filter on a shared block. With recent change that resets TCQ_F_CAN_BYPASS after filter creation, following NULL pointer dereference happens in case parent block is shared: [ 212.925060] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 212.925445] #PF: supervisor write access in kernel mode [ 212.925709] #PF: error_code(0x0002) - not-present page [ 212.925965] PGD 8000000827923067 P4D 8000000827923067 PUD 827924067 PMD 0 [ 212.926302] Oops: 0002 [#1] SMP KASAN PTI [ 212.926539] CPU: 18 PID: 2617 Comm: tc Tainted: G B 5.2.0+ #512 [ 212.926938] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 212.927364] RIP: 0010:tc_new_tfilter+0x698/0xd40 [ 212.927633] Code: 74 0d 48 85 c0 74 08 48 89 ef e8 03 aa 62 00 48 8b 84 24 a0 00 00 00 48 8d 78 10 48 89 44 24 18 e8 4d 0c 6b ff 48 8b 44 24 18 <83> 60 10 f b 48 85 ed 0f 85 3d fe ff ff e9 4f fe ff ff e8 81 26 f8 [ 212.928607] RSP: 0018:ffff88884fd5f5d8 EFLAGS: 00010296 [ 212.928905] RAX: 0000000000000000 RBX: 0000000000000000 RCX: dffffc0000000000 [ 212.929201] RDX: 0000000000000007 RSI: 0000000000000004 RDI: 0000000000000297 [ 212.929402] RBP: ffff88886bedd600 R08: ffffffffb91d4b51 R09: fffffbfff7616e4d [ 212.929609] R10: fffffbfff7616e4c R11: ffffffffbb0b7263 R12: ffff88886bc61040 [ 212.929803] R13: ffff88884fd5f950 R14: ffffc900039c5000 R15: ffff88835e927680 [ 212.929999] FS: 00007fe7c50b6480(0000) GS:ffff88886f980000(0000) knlGS:0000000000000000 [ 212.930235] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 212.930394] CR2: 0000000000000010 CR3: 000000085bd04002 CR4: 00000000001606e0 [ 212.930588] Call Trace: [ 212.930682] ? tc_del_tfilter+0xa40/0xa40 [ 212.930811] ? __lock_acquire+0x5b5/0x2460 [ 212.930948] ? find_held_lock+0x85/0xa0 [ 212.931081] ? tc_del_tfilter+0xa40/0xa40 [ 212.931201] rtnetlink_rcv_msg+0x4ab/0x5f0 [ 212.931332] ? rtnl_dellink+0x490/0x490 [ 212.931454] ? lockdep_hardirqs_on+0x260/0x260 [ 212.931589] ? netlink_deliver_tap+0xab/0x5a0 [ 212.931717] ? match_held_lock+0x1b/0x240 [ 212.931844] netlink_rcv_skb+0xd0/0x200 [ 212.931958] ? rtnl_dellink+0x490/0x490 [ 212.932079] ? netlink_ack+0x440/0x440 [ 212.932205] ? netlink_deliver_tap+0x161/0x5a0 [ 212.932335] ? lock_downgrade+0x360/0x360 [ 212.932457] ? lock_acquire+0xe5/0x210 [ 212.932579] netlink_unicast+0x296/0x350 [ 212.932705] ? netlink_attachskb+0x390/0x390 [ 212.932834] ? _copy_from_iter_full+0xe0/0x3a0 [ 212.932976] netlink_sendmsg+0x394/0x600 [ 212.937998] ? netlink_unicast+0x350/0x350 [ 212.943033] ? move_addr_to_kernel.part.0+0x90/0x90 [ 212.948115] ? netlink_unicast+0x350/0x350 [ 212.953185] sock_sendmsg+0x96/0xa0 [ 212.958099] ___sys_sendmsg+0x482/0x520 [ 212.962881] ? match_held_lock+0x1b/0x240 [ 212.967618] ? copy_msghdr_from_user+0x250/0x250 [ 212.972337] ? lock_downgrade+0x360/0x360 [ 212.976973] ? rwlock_bug.part.0+0x60/0x60 [ 212.981548] ? __mod_node_page_state+0x1f/0xa0 [ 212.986060] ? match_held_lock+0x1b/0x240 [ 212.990567] ? find_held_lock+0x85/0xa0 [ 212.994989] ? do_user_addr_fault+0x349/0x5b0 [ 212.999387] ? lock_downgrade+0x360/0x360 [ 213.003713] ? find_held_lock+0x85/0xa0 [ 213.007972] ? __fget_light+0xa1/0xf0 [ 213.012143] ? sockfd_lookup_light+0x91/0xb0 [ 213.016165] __sys_sendmsg+0xba/0x130 [ 213.020040] ? __sys_sendmsg_sock+0xb0/0xb0 [ 213.023870] ? handle_mm_fault+0x337/0x470 [ 213.027592] ? page_fault+0x8/0x30 [ 213.031316] ? lockdep_hardirqs_off+0xbe/0x100 [ 213.034999] ? mark_held_locks+0x24/0x90 [ 213.038671] ? do_syscall_64+0x1e/0xe0 [ 213.042297] do_syscall_64+0x74/0xe0 [ 213.045828] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 213.049354] RIP: 0033:0x7fe7c527c7b8 [ 213.052792] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f 0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 54 [ 213.060269] RSP: 002b:00007ffc3f7908a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 213.064144] RAX: ffffffffffffffda RBX: 000000005d34716f RCX: 00007fe7c527c7b8 [ 213.068094] RDX: 0000000000000000 RSI: 00007ffc3f790910 RDI: 0000000000000003 [ 213.072109] RBP: 0000000000000000 R08: 0000000000000001 R09: 00007fe7c5340cc0 [ 213.076113] R10: 0000000000404ec2 R11: 0000000000000246 R12: 0000000000000080 [ 213.080146] R13: 0000000000480640 R14: 0000000000000080 R15: 0000000000000000 [ 213.084147] Modules linked in: act_gact cls_flower sch_ingress nfsv3 nfs_acl nfs lockd grace fscache bridge stp llc sunrpc intel_rapl_msr intel_rapl_common [<1;69;32Msb_edac rdma_ucm rdma_cm x86_pkg_temp_thermal iw_cm intel_powerclamp ib_cm coretemp kvm_intel kvm irqbypass mlx5_ib ib_uverbs ib_core crct10dif_pclmul crc32_pc lmul crc32c_intel ghash_clmulni_intel mlx5_core intel_cstate intel_uncore iTCO_wdt igb iTCO_vendor_support mlxfw mei_me ptp ses intel_rapl_perf mei pcspkr ipmi _ssif i2c_i801 joydev enclosure pps_core lpc_ich ioatdma wmi dca ipmi_si ipmi_devintf ipmi_msghandler acpi_power_meter acpi_pad ast i2c_algo_bit drm_vram_helpe r ttm drm_kms_helper drm mpt3sas raid_class scsi_transport_sas [ 213.112326] CR2: 0000000000000010 [ 213.117429] ---[ end trace adb58eb0a4ee6283 ]--- Verify that q pointer is not NULL before setting the 'flags' field. Fixes: 3f05e688 ("net_sched: unset TCQ_F_CAN_BYPASS when adding filters") Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Christophe JAILLET authored
It is likely that 'my3216_poll()' should be 'my3126_poll()'. (1 and 2 switched in 3126. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
