- 29 Sep, 2020 15 commits
-
-
Huaisheng Ye authored
The local variable disk details is not used during the creating of thin & snap devices. Remove them from dm-thin-metadata, and add pointer validity check for pointer value in btree_lookup_raw. Skip memory copy when the caller doesn't need the value. Signed-off-by: Huaisheng Ye <yehs1@lenovo.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Mike Snitzer authored
Commit bcc90d28 ("md/raid10: improve raid10 discard request") removes raid10's inability to properly handle large discards. So eliminate associated constraint from dm-raid's raid10 support. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Mike Snitzer authored
Block core warned that discard_granularity was 0 for dm-raid with personality of raid1. Reason is that raid_io_hints() was incorrectly special-casing raid1 rather than raid0. But since commit 29efc390 ("md/md0: optimize raid0 discard handling") even raid0 properly handles large discards. Fix raid_io_hints() by removing discard limits settings for raid1. Also, fix limits for raid10 by properly stacking underlying limits as done in blk_stack_limits(). Depends-on: 29efc390 ("md/md0: optimize raid0 discard handling") Fixes: 61697a6a ("dm: eliminate 'split_discard_bios' flag from DM target interface") Cc: stable@vger.kernel.org Reported-by: Zdenek Kabelac <zkabelac@redhat.com> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Mikulas Patocka authored
Don't use crypto drivers that have the flag CRYPTO_ALG_ALLOCATES_MEMORY set. These drivers allocate memory and thus they are unsuitable for block I/O processing. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Mike Snitzer authored
dm_table_get_device_name() avoids calling dm_table_get_md() followed by dm_device_name() -- saves intermediate dm_table_get_md() call. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Mike Snitzer authored
Move 'struct dm_table' definition from dm-table.c to dm-core.h and update DM core to access its members directly. Helps optimize max_io_len() and other methods slightly. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Mike Snitzer authored
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Mike Snitzer authored
Only call bio_op() once in switch statement. Also remove the excessive factoring out to one line functions. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Mike Snitzer authored
Eliminates duplicate code, no functional change. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Mike Snitzer authored
Saves redundant dm_target_offset() math. Also, reverse argument order for max_io_len() to be consistent with other similar functions. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Mike Snitzer authored
Also, update associated stale comment in __bind(). Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Mike Snitzer authored
Using blk_max_size_offset() enables DM core's splitting to impose ti->max_io_len (via q->limits.chunk_sectors) and also fallback to respecting q->limits.max_sectors if chunk_sectors isn't set. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Mike Snitzer authored
If target set ti->max_io_len it must be used when stacking DM device's queue_limits to establish a 'chunk_sectors' that is compatible with the IO stack. By using lcm_not_zero() care is taken to avoid blindly overriding the chunk_sectors limit stacked up by blk_stack_limits(). Depends-on: 07d098e6 ("block: allow 'chunk_sectors' to be non-power-of-2") Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
Mike Snitzer authored
DM depends on these block 5.10 commits: 22ada802 block: use lcm_not_zero() when stacking chunk_sectors 07d098e6 block: allow 'chunk_sectors' to be non-power-of-2 021a2446 block: add QUEUE_FLAG_NOWAIT 6abc4946 dm: add support for REQ_NOWAIT and enable it for linear target Signed-off-by: Mike Snitzer <snitzer@redhat.com>
-
yangerkun authored
'f5bbbbe4 ("blk-mq: sync the update nr_hw_queues with blk_mq_queue_tag_busy_iter")' introduce a bug what we may sleep between rcu lock. Then '530ca2c9 ("blk-mq: Allow blocking queue tag iter callbacks")' fix it by get request_queue's ref. And 'a9a80808 ("block: Remove the synchronize_rcu() call from __blk_mq_update_nr_hw_queues()")' remove the synchronize_rcu in __blk_mq_update_nr_hw_queues. We need update the confused comments in blk_mq_queue_tag_busy_iter. Signed-off-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
- 28 Sep, 2020 1 commit
-
-
Xianting Tian authored
We found blk_mq_alloc_rq_maps() takes more time in kernel space when testing nvme device hot-plugging. The test and anlysis as below. Debug code, 1, blk_mq_alloc_rq_maps(): u64 start, end; depth = set->queue_depth; start = ktime_get_ns(); pr_err("[%d:%s switch:%ld,%ld] queue depth %d, nr_hw_queues %d\n", current->pid, current->comm, current->nvcsw, current->nivcsw, set->queue_depth, set->nr_hw_queues); do { err = __blk_mq_alloc_rq_maps(set); if (!err) break; set->queue_depth >>= 1; if (set->queue_depth < set->reserved_tags + BLK_MQ_TAG_MIN) { err = -ENOMEM; break; } } while (set->queue_depth); end = ktime_get_ns(); pr_err("[%d:%s switch:%ld,%ld] all hw queues init cost time %lld ns\n", current->pid, current->comm, current->nvcsw, current->nivcsw, end - start); 2, __blk_mq_alloc_rq_maps(): u64 start, end; for (i = 0; i < set->nr_hw_queues; i++) { start = ktime_get_ns(); if (!__blk_mq_alloc_rq_map(set, i)) goto out_unwind; end = ktime_get_ns(); pr_err("hw queue %d init cost time %lld ns\n", i, end - start); } Test nvme hot-plugging with above debug code, we found it totally cost more than 3ms in kernel space without being scheduled out when alloc rqs for all 16 hw queues with depth 1023, each hw queue cost about 140-250us. The cost time will be increased with hw queue number and queue depth increasing. And in an extreme case, if __blk_mq_alloc_rq_maps() returns -ENOMEM, it will try "queue_depth >>= 1", more time will be consumed. [ 428.428771] nvme nvme0: pci function 10000:01:00.0 [ 428.428798] nvme 10000:01:00.0: enabling device (0000 -> 0002) [ 428.428806] pcieport 10000:00:00.0: can't derive routing for PCI INT A [ 428.428809] nvme 10000:01:00.0: PCI INT A: no GSI [ 432.593374] [4688:kworker/u33:8 switch:663,2] queue depth 30, nr_hw_queues 1 [ 432.593404] hw queue 0 init cost time 22883 ns [ 432.593408] [4688:kworker/u33:8 switch:663,2] all hw queues init cost time 35960 ns [ 432.595953] nvme nvme0: 16/0/0 default/read/poll queues [ 432.595958] [4688:kworker/u33:8 switch:700,2] queue depth 1023, nr_hw_queues 16 [ 432.596203] hw queue 0 init cost time 242630 ns [ 432.596441] hw queue 1 init cost time 235913 ns [ 432.596659] hw queue 2 init cost time 216461 ns [ 432.596877] hw queue 3 init cost time 215851 ns [ 432.597107] hw queue 4 init cost time 228406 ns [ 432.597336] hw queue 5 init cost time 227298 ns [ 432.597564] hw queue 6 init cost time 224633 ns [ 432.597785] hw queue 7 init cost time 219954 ns [ 432.597937] hw queue 8 init cost time 150930 ns [ 432.598082] hw queue 9 init cost time 143496 ns [ 432.598231] hw queue 10 init cost time 147261 ns [ 432.598397] hw queue 11 init cost time 164522 ns [ 432.598542] hw queue 12 init cost time 143401 ns [ 432.598692] hw queue 13 init cost time 148934 ns [ 432.598841] hw queue 14 init cost time 147194 ns [ 432.598991] hw queue 15 init cost time 148942 ns [ 432.598993] [4688:kworker/u33:8 switch:700,2] all hw queues init cost time 3035099 ns [ 432.602611] nvme0n1: p1 So use this patch to trigger schedule between each hw queue init, to avoid other threads getting stuck. It is not in atomic context when executing __blk_mq_alloc_rq_maps(), so it is safe to call cond_resched(). Signed-off-by: Xianting Tian <tian.xianting@h3c.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
- 25 Sep, 2020 17 commits
-
-
Tejun Heo authored
An iocg may have 0 debt but non-zero delay. The current debt forgiveness logic doesn't act on such iocgs. This can lead to unexpected behaviors - an iocg with a little bit of debt will have its delay canceled through debt forgiveness but one w/o any debt but active delay will have to wait out until its delay decays out. This patch updates the debt handling logic so that it treats delays the same as debts. If either debt or delay is active, debt forgiveness logic kicks in and acts on both the same way. Also, avoid turning the debt and delay directly to zero as that can confuse state transitions. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Tejun Heo authored
Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Tejun Heo authored
Debt forgiveness logic was counting the number of consecutive !busy periods as the trigger condition. While this usually works, it can easily be thrown off by temporary fluctuations especially on configurations w/ short periods. This patch reimplements debt forgiveness so that: * Use the average usage over the forgiveness period instead of counting consecutive periods. * Debt is reduced at around the target rate (1/2 every 100ms) regardless of ioc period duration. * Usage threshold is raised to 50%. Combined with the preceding changes and the switch to average usage, this makes debt forgivness a lot more effective at reducing the amount of unnecessary idleness. * Constants are renamed with DFGV_ prefix. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Tejun Heo authored
Debt sets the initial delay duration which is decayed over time. The current debt reduction halved the debt but didn't change the delay. It prevented future debts from increasing delay but didn't do anything to lower the existing delay, limiting the mechanism's ability to reduce unnecessary idling. Reset iocg->delay to 0 after debt reduction so that iocg_kick_waitq() recalculates new delay value based on the reduced debt amount. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Tejun Heo authored
Debt reduction was blocked if any iocg was short on budget in the past period to avoid reducing debts while some iocgs are saturated. However, this ends up unnecessarily blocking debt reduction due to temporary local imbalances when the device is generally being underutilized, while also failing to block when the underlying device is overwhelmed and the usage becomes low from high latency. Given that debt accumulation mostly happens with swapout bursts which can significantly deteriorate the underlying device's latency response, the current logic is not great. Let's replace it with ioc->busy_level based condition so that we block debt reduction when the underlying device is being saturated. ioc_forgive_debts() call is moved after busy_level determination. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Tejun Heo authored
Debt reduction logic is going to be improved and expanded. Factor it out into ioc_forgive_debts() and generalize the comment a bit. No functional change. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Konstantin Khlebnikov authored
Add DM target feature flag DM_TARGET_NOWAIT which advertises that target works with REQ_NOWAIT bios. Add dm_table_supports_nowait() and update dm_table_set_restrictions() to set/clear QUEUE_FLAG_NOWAIT accordingly. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Mike Snitzer authored
Add QUEUE_FLAG_NOWAIT to allow a block device to advertise support for REQ_NOWAIT. Bio-based devices may set QUEUE_FLAG_NOWAIT where applicable. Update QUEUE_FLAG_MQ_DEFAULT to include QUEUE_FLAG_NOWAIT. Also update submit_bio_checks() to verify it is set for REQ_NOWAIT bios. Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
No need to go through the hd_struct to find the partition number. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
No need to go through the hd_struct to find the partition number. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
bd_contains is never NULL for an open block device. In addition ibd_bd is always set to a block device that was exclusively opened by the target code, so the holder is guranteed to be ib_dev as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
The ->bd_contains field is set by __blkdev_get and drivers have no business manipulating it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
bd_disk is set on all block devices, including those for partitions. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
bd_disk is set on all block devices, including those for partitions. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
To check for partitions of the same disk bd_contains works as well, but bd_disk is way more obvious. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
Add a littler helper to make the somewhat arcane bd_contains checks a little more obvious. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
bd_contains is an implementation detail and should not be mentioned in a userspace API documentation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
- 24 Sep, 2020 7 commits
-
-
Christoph Hellwig authored
Replace the two negative flags that are always used together with a single positive flag that indicates the writeback capability instead of two related non-capabilities. Also remove the pointless wrappers to just check the flag. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
Replace BDI_CAP_NO_ACCT_WB with a positive BDI_CAP_WRITEBACK_ACCT to make the checks more obvious. Also remove the pointless bdi_cap_account_writeback wrapper that just obsfucates the check. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
The BDI_CAP_STABLE_WRITES is one of the few bits of information in the backing_dev_info shared between the block drivers and the writeback code. To help untangling the dependency replace it with a queue flag and a superblock flag derived from it. This also helps with the case of e.g. a file system requiring stable writes due to its own checksumming, but not forcing it on other users of the block device like the swap code. One downside is that we an't support the stable_pages_required bdi attribute in sysfs anymore. It is replaced with a queue attribute which also is writable for easier testing. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
There is no point in trying to call bdev_read_page if SWP_SYNCHRONOUS_IO is not set, as the device won't support it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
BDI_CAP_SYNCHRONOUS_IO is only checked in the swap code, and used to decided if ->rw_page can be used on a block device. Just check up for the method instead. The only complication is that zram needs a second set of block_device_operations as it can switch between modes that actually support ->rw_page and those who don't. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
Just checking SB_I_CGROUPWB for cgroup writeback support is enough. Either the file system allocates its own bdi (e.g. btrfs), in which case it is known to support cgroup writeback, or the bdi comes from the block layer, which always supports cgroup writeback. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
Drivers shouldn't really mess with the readahead size, as that is a VM concept. Instead set it based on the optimal I/O size by lifting the algorithm from the md driver when registering the disk. Also set bdi->io_pages there as well by applying the same scheme based on max_sectors. To ensure the limits work well for stacking drivers a new helper is added to update the readahead limits from the block limits, which is also called from disk_stack_limits. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-