- 11 Mar, 2010 12 commits
-
-
Lars Ellenberg authored
Up to now, applying the in-core activity-log to the on-disk bitmap did not care for logical_block_size. On logical_block_size != 512 byte, this very likely results in misalligned block access and spurious "io errors". We now simply always submit aligned whole 4k blocks, fixing this for logical block sizes of 512, 1024, 2048 and 4096. For even larger logical block sizes, this won't work. But I'm not aware of devices with such properties being available. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Philipp Reisner authored
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Philipp Reisner authored
Up to now this only worked for Outdated and Inconsistent disks, that it did not worked for Consistent disks was an inconsistent omission. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Philipp Reisner authored
This is a race condition that existed for ages. The previous commit reduces the window, this one closes it. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Philipp Reisner authored
This mitigates changes introduced with commit: http://git.drbd.org/?p=drbd-8.3.git;a=commit;h=4b6803a3276652da3737Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
cmdname() should map command number to its human readable representation. The string table was incomplete, though. Maybe rather do a switch() block, and let the compiler help us to keep it complete? Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
Fixes a race and potential kernel panic if e.g. the worker was just about to send a few P_RS_IS_IN_SYNC via the meta socket for checksum based resync, while the receiver destroys the sockets in drbd_disconnect. To make sure no-one is using the meta socket, it is not enough to stop the asender... Grab the meta socket mutex before destroying it. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
Depending on resync request size, we need to account for more than one bit. Impact: cosmetic If SyncTarget reported correctly 100% equal checksums, the SyncSource usually reported 12% equal checksums instead, because it only counted requests, we typically do 32k resync requests, and the bitmap granularity is still 4k. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
Situation: we have diverging data sets, i.e. we had a split brain somewhen, but currently are connected, one node diskless. Then we try to attach that disk, figure it is consistent, but has a diverging data set, we refuse to attach. This led to strange state changes: 22:18:35 bb drbd1: peer( Unknown -> Primary ) conn( WFReportParams -> Connected) pdsk( DUnknown -> UpToDate ) 22:19:30 bb drbd1: disk( Diskless -> Attaching ) 22:19:30 bb drbd1: disk( Attaching -> Negotiating ) 22:19:30 bb drbd1: drbd_sync_handshake: 22:19:30 bb drbd1: self 97BF25798B9D5222:F33D1F62ADE698DD:4269796F9D027C83:AC45D8B5C3C1BF93 bits:19449 flags:0 22:19:30 bb drbd1: peer 280DFB6E125465D3:F33D1F62ADE698DC:4269796F9D027C82:AC45D8B5C3C1BF93 bits:2575806 flags:0 22:19:30 bb drbd1: uuid_compare()=100 by rule 90 22:19:30 bb drbd1: Split-Brain detected, dropping connection! 22:19:30 bb drbd1: disk( Negotiating -> Diskless ) while the other side says: 22:19:30 aa drbd1: Split-Brain detected, dropping connection! 22:19:30 aa drbd1: Disk attach process on the peer node was aborted. 22:19:30 aa drbd1: conn( Connected -> TOO_LARGE ) pdsk( Diskless -> Consistent ) This should be fixed now. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
we still don't support 4k 'physical' sectors 'natively', but use a read-modify-write workaround. And we even tried to use the extra page before we allocated it :( Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Philipp Reisner authored
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Thomas Gleixner authored
The bm_change semaphore is semantically a mutex. Convert it to a real mutex. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
-
- 09 Mar, 2010 1 commit
-
-
William Cohen authored
This patch adds a simple description of the various block tracepoints available in the kernel. Signed-off-by: William Cohen <wcohen@redhat.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
- 08 Mar, 2010 3 commits
-
-
FUJITA Tomonori authored
- It looks incorrect to use blk_rq_map_sg with pci_map_page here about DMA mappings. dma_map_sg? - better to use dma_map_page instead of pci_map_page. http://marc.info/?l=linux-kernel&m=126596737604808&w=2Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Dmitry Monakhov authored
merge_bvec_fn() returns bvec->bv_len on success. So we have to check against this value. But in case of fs_optimization merge we compare with wrong value. This patch must be included in b428cd6da7e6559aca69aa2e3a526037d3f20403 But accidentally i've forgot to add this in the initial patch. To make things straight let's replace all such checks. In fact this makes code easy to understand. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio-consoleLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio-console: virtio: console: Use better variable names for fill_queue operation virtio: console: Fix type of 'len' as unsigned int
-
- 07 Mar, 2010 24 commits
-
-
Linus Torvalds authored
Merge branch 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits) x86, mrst: Fix whitespace breakage in apb_timer.c x86, mrst: Fix APB timer per cpu clockevent x86, mrst: Remove X86_MRST dependency on PCI_IOAPIC x86, olpc: Use pci subarch init for OLPC x86, pci: Add arch_init to x86_init abstraction x86, mrst: Add Kconfig dependencies for Moorestown x86, pci: Exclude Moorestown PCI code if CONFIG_X86_MRST=n x86, numaq: Make CONFIG_X86_NUMAQ depend on CONFIG_PCI x86, pci: Add sanity check for PCI fixed bar probing x86, legacy_irq: Remove duplicate vector assigment x86, legacy_irq: Remove left over nr_legacy_irqs x86, mrst: Platform clock setup code x86, apbt: Moorestown APB system timer driver x86, mrst: Add vrtc platform data setup code x86, mrst: Add platform timer info parsing code x86, mrst: Fill in PCI functions in x86_init layer x86, mrst: Add dummy legacy pic to platform setup x86/PCI: Moorestown PCI support x86, ioapic: Add dummy ioapic functions x86, ioapic: Early enable ioapic for timer irq ... Fixed up semantic conflict of new clocksources due to commit 17622339 ("clocksource: add argument to resume callback").
-
git://git.fluff.org/bjdooks/linuxLinus Torvalds authored
* 'for-linus/i2c' of git://git.fluff.org/bjdooks/linux: i2c: Add support for Xilinx XPS IIC Bus Interface i2c: omap: Add support for 16-bit registers i2c-pnx: fix setting start/stop condition powerpc: doc/dts-bindings: update doc of FSL I2C bindings i2c-mpc: add support for the MPC512x processors from Freescale i2c-mpc: rename "setclock" initialization functions to "setup" i2c-mpc: use __devinit[data] for initialization functions and data i2c/imx: don't add probe function to the driver struct i2c: Add support for Ux500/Nomadik I2C controller
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6Linus Torvalds authored
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (66 commits) mfd: Fix ucb1x00 build failure for collie_defconfig mfd: Fix lpc_sch related depends/selects, fix build error gpio: Fix sch_gpio warning gpio: add Intel SCH GPIO controller driver i2c: convert i2c-isch to platform_device mfd: Use completion interrupt for WM831x AUXADC mfd: Use completion interrupt for WM835x AUXADC mfd: Introduce remove_script function for twl4030 mfd/mmc: SDHI Kconfig update mfd: sh_mobile_sdhi MMC_CAP_MMC_HIGHSPEED support gpiolib: Force wm831x GPIOs into GPIO mode when requested mfd: Add WM831x revision B support gpiolib: Correct debugfs display of WM831x GPIO inversion gpiolib: Actually set output state in wm831x_gpio_direction_output() tmio_mmc: Balance cell enable()/disable() calls tmio_mmc: Remove const from platform data V3 tmio_mmc: Use 100ms mmc_detect_change() delay tmio_mmc: Add MMC_CAP_MMC_HIGHSPEED support V2 tmio_mmc: Keep card-detect interrupts enabled mfd: Add twl6030 base addr for ID0, ID1, ID2 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (368 commits) Staging: winbond: fix up wireless api errors Staging: dream: camera: sk5k3e2fx: fix code style issues Staging: dream: camera: msm_camera: fix code style issues Staging: wlan-ng: More checkpatch.pl error cleanups Staging: wlan-ng - checkpatch.pl fixups Staging: comedi: comedi_fops.c: Checkpatch cleanup Staging: comedi: fix suspect code indent in ni_labpc.c Staging: comedi: fix yet another brace coding style issue in ni_labpc.c Staging: comedi: fix another brace coding style issues in ni_labpc.c Staging: comedi: fix brace coding style issue in ni_labpc.c Staging: comedi: poc: Adding some KERN_ facility level Staging: dream: camera: msm_camera: fix some code style issues Staging: wlan-ng: fix most of the style issues in hfa384x.h Staging: dream: camera: msm_camera: fix coding style issues Staging: comedi: fix bracing coding style and 80 character issues in ni_660x.c Staging: comedi: fix bracing coding style issue in ni_65xx.c Staging: comedi: pcmad: Checkpatch cleanups Staging: comedi: poc: fix coding style issues staging: dt3155: revert u_long to u64 usage Staging: comedi: drivers.c: Checkpatch cleanup ...
-
Randy Dunlap authored
Fix kernel-doc notation in new seq-file functions and correct spelling. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (26 commits) sh: Convert sh to use read/update_persistent_clock sh: Move PMB debugfs entry initialization to later stage sh: Fix up flush_cache_vmap() on SMP. sh: fix up MMU reset with variable PMB mapping sizes. sh: establish PMB mappings for NUMA nodes. sh: check for existing mappings for bolted PMB entries. sh: fixed virt/phys mapping helpers for PMB. sh: make pmb iomapping configurable. sh: reworked dynamic PMB mapping. sh: Fix up cpumask_of_pcibus() for the NUMA build. serial: sh-sci: Tidy up build warnings. sh: Fix up ctrl_read/write stragglers in migor setup. serial: sh-sci: Add DMA support. dmaengine: shdma: extend .device_terminate_all() to record partial transfer sh: merge sh7722 and sh7724 DMA register definitions sh: activate runtime PM for dmaengine on sh7722 and sh7724 dmaengine: shdma: add runtime PM support. dmaengine: shdma: separate DMA headers. dmaengine: shdma: convert to platform device resources dmaengine: shdma: fix DMA error handling. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: parisc: use __ratelimit in unaligned.c parisc: Convert to read/update_persistent_clock parisc: Simplify param.h by including <asm-generic/param.h> parisc: drop unnecessary cast in __ldcw_align() macro parisc: add strict copy size checks (v2) parisc: remove trailing space in messages parisc: ditto sys_accept4 parisc: wire up sys_recvmmsg
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM: Provide generic subsystem-level callbacks PM / Runtime: Document power.runtime_auto and related functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio: set pci bus master enable bit
-
Ben Dooks authored
-
Ben Dooks authored
-
Ben Dooks authored
-
Richard Röjfors authored
This patch adds support for the Xilinx XPS IIC Bus Interface. The driver uses the dynamic mode, supporting to put several I2C messages in the FIFO to reduce the number of interrupts. It has the same feature as ocores, it can be passed a list of devices that will be added when the bus is probed. Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Cory Maccarrone authored
The current i2c-omap driver is set up for 32-bit registers, which corresponds to most OMAP devices. However, OMAP730/850 based devices use a 16-bit register size. This change modifies the driver to perform a runtime CPU type check to determine the register sizes, and uses a bit shift of either 1 or 2 bits to compute the proper register sizes for all registers. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Luotao Fu authored
The start/stop condtions are set in different places repetedly in the i2c-pnx driver. Beside in i2c_pnx_start and i2c_pnx_stop the start/stop bit are also set during the transfer of a i2c message in the master_xmit/rcv calls. This is wrong since we can't set the start/stop condition during the transaction of a single message any way. As a matter of fact, the driver will sometimes set both the start and the stop bits at one time. This can be easily reproduced by sending a simple read request like e.g struct i2c_msg msgs[] = { { addr, 0, 1, buf }, { addr, I2C_M_RD, offset, buf } }; While processing the first message the i2c_pnx_master_xmit will set both the start_bit and the stop_bit, which will eventually confuse the slave. Fixed by remove setting start/stop condition from the transmit routines. Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Wolfgang Grandegger authored
This patch adds the MPC5121 to the list of supported devices, enhances the doc of the "clock-frequency" property and removes the obsolete "cell-index", "device_type" and "fsl-i2c" property. Furthermore an example for the MPC5121 has been added. Signed-off-by: Wolfgang Grandegger <wg@denx.de> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Wolfgang Grandegger authored
As I2C interrupts must be enabled for the MPC512x by the setup function as well, "fsl,preserve-clocking" is handled in a slighly different way. Also, the old settings are now reported calling dev_dbg(). For the MPC512x the clock setup function of the MPC52xx can be re-used. Furthermore, the Kconfig help has been updated and corrected. Signed-off-by: Wolfgang Grandegger <wg@denx.de> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Wolfgang Grandegger authored
To prepare support for the MPC512x processors from Freescale the "setclock" initialization functions have been renamed to "setup" because I2C interrupts must be enabled for the MPC512x by this function as well. Signed-off-by: Wolfgang Grandegger <wg@denx.de> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Wolfgang Grandegger authored
"__devinit[data]" has not yet been used for all initialization functions and data. To avoid truncating lines, the struct "mpc_i2c_match_data" has been renamed to "mpc_i2c_data", which is even the better name. Signed-off-by: Wolfgang Grandegger <wg@denx.de> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Uwe Kleine-König authored
Having a pointer to the probe function is unnecessary when using platform_driver_probe and yields a section mismatch warning after removing the white list entry "*driver" for { .data$, .data.rel$ } -> { .init.* } mismatches in modpost. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
srinidhi kasagar authored
This adds support for ST-Ericsson's I2C block found in Ux500 and Nomadik 8815 platforms. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Peter Huewe authored
This patch fixes a build failure[1], by adding the missing semaphore.h include References: [1] http://kisskb.ellerman.id.au/kisskb/buildresult/2234322/Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Randy Dunlap authored
LPC_SCH is selected by GPI_SCH and I2C_ISCH, even when PCI is not enabled, but LPC_SCH depends on PCI, so make GPI_SCH and I2C_ISCH also depend on PCI. Those 2 selects also need to select what LPC_SCH selects, since kconfig does not follow selects. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Denis Turischev <denis@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Samuel Ortiz authored
We need to check for gpiochip_remove() errors. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-