- 20 Apr, 2009 3 commits
-
-
Jesse Brandeburg authored
As reported by Andrew Lutomirski <amluto@gmail.com> All the intel wired ethernet drivers were calling netif_carrier_off and netif_stop_queue (or variants) before calling register_netdevice This is incorrect behavior as was pointed out by davem, and causes ifconfig and friends to report a strange state before first link after the driver was loaded, since without a netif_carrier_off, the stack assumes carrier_on, but before register_netdev, netlink messages are not sent out telling link state. This apparently confused *some* versions of networkmanager. in addition this driver appeared to need a netif_start_queue at the end of open. Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Reported-by:
Andrew Lutomirski <amluto@gmail.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jesse Brandeburg authored
As reported by Andrew Lutomirski <amluto@gmail.com> All the intel wired ethernet drivers were calling netif_carrier_off and netif_stop_queue (or variants) before calling register_netdevice This is incorrect behavior as was pointed out by davem, and causes ifconfig and friends to report a strange state before first link after the driver was loaded, since without a netif_carrier_off, the stack assumes carrier_on, but before register_netdev, netlink messages are not sent out telling link state. This apparently confused *some* versions of networkmanager. Signed-off-by:
-
Alexander Beregalov authored
Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by:
-
- 17 Apr, 2009 9 commits
-
-
Andrew Gallatin authored
A compilation error snuck into 2d90b0aa due to an over-zealous indent script removing spaces around array initialization ellipsis. The attached patch fixes the myri10ge compilation in net-next. Signed-off-by:
Andrew Gallatin <gallatin@myri.com> Signed-off-by:
-
Eric Dumazet authored
inet_register_protosw() function is responsible for adding a new inet protocol into a global table (inetsw[]) that is used with RCU rules. As soon as the store of the pointer is done, other cpus might see this new protocol in inetsw[], so we have to make sure new protocol is ready for use. All pending memory updates should thus be committed to memory before setting the pointer. This is correctly done using rcu_assign_pointer() synchronize_net() is typically used at unregister time, after unsetting the pointer, to make sure no other cpu is still using the object we want to dismantle. Using it at register time is only adding an artificial delay that could hide a real bug, and this bug could popup if/when synchronize_rcu() can proceed faster than now. This saves about 13 ms on boot time on a HZ=1000 8 cpus machine ;) (4 calls to inet_register_protosw(), and about 3200 us per call) Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Signed-off-by:
-
Alexander Beregalov authored
On Fri, Apr 17, 2009 at 05:23:02AM +0400, Alexander Beregalov wrote: > > Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> > --- > drivers/net/wan/pc300_drv.c | 22 ++++++++++++++-------- > 1 files changed, 14 insertions(+), 8 deletions(-) > > diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c > index c23fde0..df10a4c 100644 > --- a/drivers/net/wan/pc300_drv.c > +++ b/drivers/net/wan/pc300_drv.c > @@ -225,6 +225,7 @@ static char rcsid[] = > #include <linux/skbuff.h> > #include <linux/if_arp.h> > #include <linux/netdevice.h> > +#include <linux/etherdevice.h> > #include <linux/spinlock.h> > #include <linux/if.h> > #include <net/arp.h> > @@ -3246,6 +3247,18 @@ static inline void show_version(void) > rcsvers, rcsdate, __DATE__, __TIME__); > } /* show_version */ > > +static const struct net_device_ops cpc_netdev_ops = { > + .ndo_init = NULL, > + .ndo_open = cpc_open, > + .ndo_stop = cpc_close, > + .ndo_tx_timeout = cpc_tx_timeout, > + .ndo_set_multicast_list = NULL, In this case ndo_init and ndo_set_multicast_list are not needed. >From 1507a5a797a5f0005696a9bf10e390caca9c3800 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov <a.beregalov@gmail.com> Date: Fri, 17 Apr 2009 05:45:48 +0400 Subject: [PATCH] wan/pc300_drv: convert to net_device_ops Signed-off-by: -
Alexander Beregalov authored
Signed-off-by:
-
Brice Goglin authored
Fix tx ring size reported via ethtool -g. Signed-off-by:
Brice Goglin <brice@myri.com> Signed-off-by:
-
Brice Goglin authored
Add MODULE_DEVICE_TABLE so that modinfo reports pci device id aliases. Signed-off-by:
-
Brice Goglin authored
Add myri10ge_fw_names to override the default firmware on a per-board basis. Signed-off-by:
-
Brice Goglin authored
Force a statistics update when our ethtool gstats routine is called. Otherwise, ethtool will continue to read stale stats until something forces an update by reading /proc/net/dev This requires putting a lock around the stats update to guard against 2 threads (one via ethtool, and one via procfs) updating the stats at once. Signed-off-by:
-
David S. Miller authored
-
- 16 Apr, 2009 28 commits
-
-
-
Tony Breeds authored
GCC warns: drivers/net/ixgbe/ixgbe_main.c: In function 'ixgbe_sfp_config_module_task': drivers/net/ixgbe/ixgbe_main.c:3920: warning: suggest parantheses around operand of '!' or change '&' to '&&' or '!' to '~' Which I think is right. Bracket to remove ambiguity. Signed-off-by:
Tony Breeds <tony@bakeyournoodle.com> Signed-off-by:
-
Patrick McHardy authored
The removal of the SAME target accidentally removed one feature that is not available from the normal NAT targets so far, having multi-range mappings that use the same mapping for each connection from a single client. The current behaviour is to choose the address from the range based on source and destination IP, which breaks when communicating with sites having multiple addresses that require all connections to originate from the same IP address. Introduce a IP_NAT_RANGE_PERSISTENT option that controls whether the destination address is taken into account for selecting addresses. http://bugzilla.kernel.org/show_bug.cgi?id=12954Signed-off-by:
Patrick McHardy <kaber@trash.net>
-
Atsushi Nemoto authored
The commit a390d1f3 ("phylib: convert state_queue work to delayed_work") missed converting 'expires' value to 'delay' value. Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by:
-
Sascha Hauer authored
We called fec_stop() in fec_enet_close(), thus we have to call fec_restart() in fec_enet_open(). Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Sascha Hauer authored
Allocate buffers in fec_open and free them again in fec_close. This makes it possible to use this driver as a module. Signed-off-by:
-
Sascha Hauer authored
Signed-off-by:
-
Sascha Hauer authored
These printks in fec_timeout do not give useful information in a production kernel. Signed-off-by:
-
Sascha Hauer authored
Otherwise we get a lot of alignment errors Signed-off-by:
-
Sascha Hauer authored
fec_enet_init() does the hardware initialisation and then calls fec_restart() which does the same initialisation again, so we can safely remove the initialisation from fec_enet_init(). Signed-off-by:
-
Sascha Hauer authored
Signed-off-by:
-
Sascha Hauer authored
Signed-off-by:
-
Sascha Hauer authored
Signed-off-by:
-
Sascha Hauer authored
Signed-off-by:
-
Sascha Hauer authored
Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
-
