- 03 Feb, 2012 1 commit
-
-
Dan Carpenter authored
transport_init_session() and target_fabric_configfs_init() don't return NULL pointers, they only return ERR_PTRs or valid pointers. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
-
- 02 Feb, 2012 3 commits
-
-
Jesper Juhl authored
Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Roland Dreier <roland@purestorage.com>
-
Roland Dreier authored
Signed-off-by: Roland Dreier <roland@purestorage.com>
-
Roland Dreier authored
Signed-off-by: Roland Dreier <roland@purestorage.com>
-
- 01 Feb, 2012 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
InfiniBand/RDMA fixes for 3.3: - Fix a crash due to a regression (uninitialized refcnt) introduced in 3.2 with XRC support. - Close race in how ucma reports events when connect fails. - Process vendor-specific MADs in mlx4 so that eg FDR-10 data rate works. - Fix regression in qib caused by over-aggressive PCIe tuning. - Other small fixes for hardware drivers (ipath, nes, qib). * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/nes: Copyright update IB/mlx4: pass SMP vendor-specific attribute MADs to firmware RDMA/nes: Fix fast memory registration opcode RDMA/nes: Fix fast memory registration length RDMA/ucma: Discard all events for new connections until accepted IB/qib: Roll back PCIe tuning change IB/qib: Use GFP_ATOMIC when locks are held RDMA/nes: Add missing rcu_read_unlock() in nes_addr_resolve_neigh() RDMA/nes: Fix for sending MPA reject frame IB/ipath: Calling PTR_ERR() on right variable in create_file() RDMA/core: Fix kernel panic by always initializing qp->usecnt
-
Oleg Nesterov authored
Once /proc/pid/mem is opened, the memory can't be released until mem_release() even if its owner exits. Change mem_open() to do atomic_inc(mm_count) + mmput(), this only pins mm_struct. Change mem_rw() to do atomic_inc_not_zero(mm_count) before access_remote_vm(), this verifies that this mm is still alive. I am not sure what should mem_rw() return if atomic_inc_not_zero() fails. With this patch it returns zero to match the "mm == NULL" case, may be it should return -EINVAL like it did before e268337d. Perhaps it makes sense to add the additional fatal_signal_pending() check into the main loop, to ensure we do not hold this memory if the target task was oom-killed. Cc: stable@kernel.org Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Oleg Nesterov authored
No functional changes, cleanup and preparation. mem_read() and mem_write() are very similar. Move this code into the new common helper, mem_rw(), which takes the additional "int write" argument. Cc: stable@kernel.org Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Oleg Nesterov authored
mem_release() can hit mm == NULL, add the necessary check. Cc: stable@kernel.org Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Greg KH authored
My email address has changed, the suse.de one is now dead, so update all of my MAINTAINER entries with the correct one so that patches don't get lost. Also change the status of some of my entries as I'm supposed to be doing this stuff now for real. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Artem Bityutskiy authored
This patch fixes merge conflict resolution breakage introduced by merge d3712b9d ("Merge tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream"). The commit changed 'mtd_can_have_bb()' function and made it always return zero, which is incorrect. Instead, we need it to return whether the underlying flash device can have bad eraseblocks or not. UBI needs this information because it affects how it handles the underlying flash. E.g., if the underlying flash is NOR, it cannot have bad blocks and any write or erase error is fatal, and all we can do is to switch to R/O mode. We do not need to reserve a pool of good eraseblocks for bad eraseblocks handling, and so on. This patch also removes 'mtd_can_have_bb()' invocations from Logfs to ensure correct Logfs behavior. I've tested that with this patch UBI works on top of NOR and NAND flashes emulated by mtdram and nandsim correspondingly. This patch is based on patch from Linus Torvalds. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Jörn Engel <joern@logfs.org> Acked-by: Prasad Joshi <prasadjoshi.linux@gmail.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 31 Jan, 2012 7 commits
-
-
Linus Torvalds authored
-
git://github.com/prasad-joshi/logfs_upstreamLinus Torvalds authored
There are few important bug fixes for LogFS * tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream: Logfs: Allow NULL block_isbad() methods logfs: Grow inode in delete path logfs: Free areas before calling generic_shutdown_super() logfs: remove useless BUG_ON MAINTAINERS: Add Prasad Joshi in LogFS maintiners logfs: Propagate page parameter to __logfs_write_inode logfs: set superblock shutdown flag after generic sb shutdown logfs: take write mutex lock during fsync and sync logfs: Prevent memory corruption logfs: update page reference count for pined pages Fix up conflict in fs/logfs/dev_mtd.c due to semantic change in what "mtd->block_isbad" means in commit f2933e86: "Logfs: Allow NULL block_isbad() methods" clashing with the abstraction changes in the commits 7086c19d: "mtd: introduce mtd_block_isbad interface" and d58b27ed: "logfs: do not use 'mtd->block_isbad' directly". This resolution takes the semantics from commit f2933e86, and just makes mtd_block_isbad() return zero (false) if the 'block_isbad' function is NULL. But that also means that now "mtd_can_have_bb()" always returns 0. Now, "mtd_block_markbad()" will obviously return an error if the low-level driver doesn't support bad blocks, so this is somewhat non-symmetric, but it actually makes sense if a NULL "block_isbad" function is considered to mean "I assume that all my blocks are always good".
-
Linus Torvalds authored
Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (w83627ehf) Disable setting DC mode for pwm2, pwm3 on NCT6776F hwmon: (sht15) fix bad error code MAINTAINERS: Drop maintainer for MAX1668 hwmon driver MAINTAINERS: Add hwmon entries for Wolfson hwmon: (f71805f) Fix clamping of temperature limits
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Here are some fixes to the pin control system that has accumulated since -rc1. Mainly Tony Lindgren fixed the module load/unload logic and the rest are minor fixes and documentation. * 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: add checks for empty function names pinctrl: fix pinmux_hog_maps when ctrl_dev_name is not set pinctrl: fix some pinmux typos pinctrl: free debugfs entries when unloading a pinmux driver pinctrl: unbreak error messages Documentation/pinctrl: fix a few syntax errors in code examples pinctrl: fix pinconf_pins_show iteration
-
Roland Dreier authored
-
Tatyana Nikolova authored
Update copyright information in the source files. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Faisal Latif <Faisal.Latif@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
-
Jack Morgenstein authored
In the current code, vendor-specific MADs (e.g with the FDR-10 attribute) are silently dropped by the driver, resulting in timeouts at the sending side and inability to query/configure the relevant feature. However, the ConnectX firmware is able to handle such MADs. For unsupported attributes, the firmware returns a GET_RESPONSE MAD containing an error status. For example, for a FDR-10 node with LID 11: # ibstat mlx4_0 1 CA: 'mlx4_0' Port 1: State: Active Physical state: LinkUp Rate: 40 (FDR10) Base lid: 11 LMC: 0 SM lid: 24 Capability mask: 0x02514868 Port GUID: 0x0002c903002e65d1 Link layer: InfiniBand Extended Port Query (EPI) vendor mad timeouts before the patch: # smpquery MEPI 11 -d ibwarn: [4196] smp_query_via: attr 0xff90 mod 0x0 route Lid 11 ibwarn: [4196] _do_madrpc: retry 1 (timeout 1000 ms) ibwarn: [4196] _do_madrpc: retry 2 (timeout 1000 ms) ibwarn: [4196] _do_madrpc: timeout after 3 retries, 3000 ms ibwarn: [4196] mad_rpc: _do_madrpc failed; dport (Lid 11) smpquery: iberror: [pid 4196] main: failed: operation EPI: ext port info query failed EPI query works OK with the patch: # smpquery MEPI 11 -d ibwarn: [6548] smp_query_via: attr 0xff90 mod 0x0 route Lid 11 ibwarn: [6548] mad_rpc: data offs 64 sz 64 mad data 0000 0000 0000 0001 0000 0001 0000 0001 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 # Ext Port info: Lid 11 port 0 StateChangeEnable:...............0x00 LinkSpeedSupported:..............0x01 LinkSpeedEnabled:................0x01 LinkSpeedActive:.................0x01 Signed-off-by: Jack Morgenstein <jackm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: Ira Weiny <weiny2@llnl.gov> Cc: <stable@vger.kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
-
- 30 Jan, 2012 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Here are some tty/serial patches for 3.3-rc1 Big thing here is the movement of the 8250 serial drivers to their own directory, now that the patch churn has calmed down. Other than that, only minor stuff (omap patches were reverted as they were found to be wrong), and another broken driver removed from the system. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> * tag 'tty-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: Kill off Moorestown code Revert "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA mode" Revert "tty: serial: OMAP: transmit FIFO threshold interrupts don't wake the chip" serial: Fix wakeup init logic to speed up startup docbook: don't use serial_core.h in device-drivers book serial: amba-pl011: lock console writes against interrupts amba-pl011: do not disable RTS during shutdown tty: serial: OMAP: transmit FIFO threshold interrupts don't wake the chip tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA mode omap-serial: make serial_omap_restore_context depend on CONFIG_PM_RUNTIME omap-serial :Make the suspend/resume functions depend on CONFIG_PM_SLEEP. TTY: fix UV serial console regression jsm: Fixed EEH recovery error Updated TTY MAINTAINERS info serial: group all the 8250 related code together
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Here are a bunch of USB patches for 3.3-rc1. Nothing major, largest thing here is the removal of some drivers that did not work at all. Other than that, the normal collection of bugfixes and new device ids. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> * tag 'usb-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (52 commits) uwb & wusb: fix kconfig error USB: Realtek cr: fix autopm scheduling while atomic USB: ftdi_sio: Add more identifiers xHCI: Cleanup isoc transfer ring when TD length mismatch found usb: musb: omap2430: minor cleanups. qcaux: add more Pantech UML190 and UML290 ports Revert "drivers: usb: Fix dependency for USB_HWA_HCD" usb: mv-otg - Fix build if CONFIG_USB is not set USB: cdc-wdm: Avoid hanging on interface with no USB_CDC_DMM_TYPE usb: add support for STA2X11 host driver drivers: usb: Fix dependency for USB_HWA_HCD kernel-doc: fix new warning in usb.h USB: OHCI: fix new compiler warnings usb: serial: kobil_sct: fix compile warning: drivers/usb/host/ehci-fsl.c: add missing iounmap USB: cdc-wdm: better allocate a buffer that is at least as big as we tell the USB core USB: cdc-wdm: call wake_up_all to allow driver to shutdown on device removal USB: cdc-wdm: use two mutexes to allow simultaneous read and write USB: cdc-wdm: updating desc->length must be protected by spin_lock USB: usbsevseg: fix max length ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
1) Setting link attributes can modify the size of the attributes that would be reported on a subsequent getlink netlink operation, therefore min_ifinfo_dump_size needs to be adjusted. From Stefan Gula. 2) Resegmentation of TSO frames while trimming can violate invariants expected by callers, namely that the number of segments can only stay the same or decrease, never increase. If MSS changes, however, we can trim data but then end up with more segments. Fix this by only segmenting to the MSS already recorded in the SKB. That's the simplest fix for now and if we want to get more fancy in the future that's a more involved change. This probably explains some retransmit counter inaccuracies. From Neal Cardwell. 3) Fix too-many-wakeups in POLL with AF_UNIX sockets, from Eric Dumazet. 4) Fix CAIF crashes wrt. namespace handling. From Eric Dumazet and Eric W. Biederman. 5) TCP port selection fixes from Flavio Leitner. 6) More socket memory cgroup build fixes in certain randonfig situations. From Glauber Costa. 7) Fix TCP memory sysctl regression reported by Ingo Molnar, also from Glauber Costa. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: af_unix: fix EPOLLET regression for stream sockets tcp: fix tcp_trim_head() to adjust segment count with skb MSS net/tcp: Fix tcp memory limits initialization when !CONFIG_SYSCTL net caif: Register properly as a pernet subsystem. netns: Fail conspicously if someone uses net_generic at an inappropriate time. net: explicitly add jump_label.h header to sock.h net: RTNETLINK adjusting values of min_ifinfo_dump_size ipv6: Fix ip_gre lockless xmits. xen-netfront: correct MAX_TX_TARGET calculation. netns: fix net_alloc_generic() tcp: bind() optimize port allocation tcp: bind() fix autoselection to share ports l2tp: l2tp_ip - fix possible oops on packet receive iwlwifi: fix PCI-E transport "inta" race mac80211: set bss_conf.idle when vif is connected mac80211: update oper_channel on ibss join
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds authored
This fixes an integration issue with the regulator device tree bindings which shook out in -rc. The bindings were overly enthusiatic when deciding to set a voltage on a regulator and would try to set zero volts on an unconfigured regulator which isn't supported. * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Set apply_uV only when min and max voltages are defined
-
Eric Dumazet authored
Commit 0884d7aa (AF_UNIX: Fix poll blocking problem when reading from a stream socket) added a regression for epoll() in Edge Triggered mode (EPOLLET) Appropriate fix is to use skb_peek()/skb_unlink() instead of skb_dequeue(), and only call skb_unlink() when skb is fully consumed. This remove the need to requeue a partial skb into sk_receive_queue head and the extra sk->sk_data_ready() calls that added the regression. This is safe because once skb is given to sk_receive_queue, it is not modified by a writer, and readers are serialized by u->readlock mutex. This also reduce number of spinlock acquisition for small reads or MSG_PEEK users so should improve overall performance. Reported-by: Nick Mathewson <nickm@freehaven.net> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Alexey Moiseytsev <himeraster@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neal Cardwell authored
This commit fixes tcp_trim_head() to recalculate the number of segments in the skb with the skb's existing MSS, so trimming the head causes the skb segment count to be monotonically non-increasing - it should stay the same or go down, but not increase. Previously tcp_trim_head() used the current MSS of the connection. But if there was a decrease in MSS between original transmission and ACK (e.g. due to PMTUD), this could cause tcp_trim_head() to counter-intuitively increase the segment count when trimming bytes off the head of an skb. This violated assumptions in tcp_tso_acked() that tcp_trim_head() only decreases the packet count, so that packets_acked in tcp_tso_acked() could underflow, leading tcp_clean_rtx_queue() to pass u32 pkts_acked values as large as 0xffffffff to ca_ops->pkts_acked(). As an aside, if tcp_trim_head() had really wanted the skb to reflect the current MSS, it should have called tcp_set_skb_tso_segs() unconditionally, since a decrease in MSS would mean that a single-packet skb should now be sliced into multiple segments. Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Glauber Costa authored
sysctl_tcp_mem() initialization was moved to sysctl_tcp_ipv4.c in commit 3dc43e3e, since it became a per-ns value. That code, however, will never run when CONFIG_SYSCTL is disabled, leading to bogus values on those fields - causing hung TCP sockets. This patch fixes it by keeping an initialization code in tcp_init(). It will be overwritten by the first net namespace init if CONFIG_SYSCTL is compiled in, and do the right thing if it is compiled out. It is also named properly as tcp_init_mem(), to properly signal its non-sysctl side effect on TCP limits. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Glauber Costa <glommer@parallels.com> Cc: David S. Miller <davem@davemloft.net> Link: http://lkml.kernel.org/r/4F22D05A.8030604@parallels.com [ renamed the function, tidied up the changelog a bit ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: [S390] dasd: revalidate server for new pathgroup [S390] dasd: revert LCU optimization [S390] cleanup entry point definition
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
* 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: generic atomic64 support
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: vmwgfx: Fix assignment in vmw_framebuffer_create_handle drm/radeon/kms: Fix device tree linkage of i2c buses drm: Pass the real error code back during GEM bo initialisation Revert "drm/i810: cleanup reclaim_buffers"
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
NFS client bugfixes for Linux 3.3 (pull 3) * tag 'nfs-for-3.3-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Fix machine creds in generic_create_cred and generic_match
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Power management fix for 3.3-rc2 Fix for a hibernate (s2disk) regression introduced during the 3.2 merge window that causes s2disk to trigger BUG_ON() in freeze_workqueues_begin() if there is not enough swap space to save the image. * tag 'pm-fix-for-3.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / Hibernate: Fix s2disk regression related to freezing workqueues
-
Ryan Mallon authored
The assignment of handle in vmw_framebuffer_create_handle doesn't actually do anything useful and is incorrectly assigning an integer value to a pointer argument. It appears that this is a typo and should be dereferencing handle rather than assigning to it directly. This fixes a bug where an undefined handle value is potentially returned to user-space. Signed-off-by: Ryan Mallon <rmallon@gmail.com> Reviewed-by: Jakob Bornecrantz<jakob@vmware.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Jean Delvare authored
Properly set the parent device of i2c buses before registering them so that they will show at the right place in the device tree (rather than in /sys/devices directly.) Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Dave Airlie <airlied@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Chris Wilson authored
In particular, I found I was hitting the max-file limit in the VFS, and the EFILE was being magically transformed into ENOMEM. Confusion reigns. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Daniel Vetter authored
This reverts commit 87499ffd. Where is that paper bag ... ah here. I've failed to take an odd interaction between my other cleanups and this reclaim_buffers patch into account and also failed to properly test it. Looks like there are more dragons and hidden trapdoors in the drm release path than actual lines of code. Until I get a clue, let's just revert this. Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
- 29 Jan, 2012 7 commits
-
-
Guenter Roeck authored
NCT6776F only supports pwm mode for pwm2 and pwm3. Return error if an attempt is made to set those pwm channels to DC mode. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
-
Rafael J. Wysocki authored
Commit 2aede851 PM / Hibernate: Freeze kernel threads after preallocating memory introduced a mechanism by which kernel threads were frozen after the preallocation of hibernate image memory to avoid problems with frozen kernel threads not responding to memory freeing requests. However, it overlooked the s2disk code path in which the SNAPSHOT_CREATE_IMAGE ioctl was run directly after SNAPSHOT_FREE, which caused freeze_workqueues_begin() to BUG(), because it saw that worqueues had been already frozen. Although in principle this issue might be addressed by removing the relevant BUG_ON() from freeze_workqueues_begin(), that would reintroduce the very problem that commit 2aede851 attempted to avoid into that particular code path. For this reason, to fix the issue at hand, introduce thaw_kernel_threads() and make the SNAPSHOT_FREE ioctl execute it. Special thanks to Srivatsa S. Bhat for detailed analysis of the problem. Reported-and-tested-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: stable@kernel.org
-
Vivien Didelot authored
When no platform data was supplied, returned error code was 0. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: stable@vger.kernel.org # 2.6.32+ Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
-
Linus Torvalds authored
Merge tag 'driver-core-3.3-rc1-bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Here are some patches for the 3.3-rc1 tree. It contains the removal of the sysdev code, now that all users of it are gone, as well as some sysfs bugfixes that have been reported by users. There are also some documentation updates here as well. * tag 'driver-core-3.3-rc1-bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: sysfs: Complain bitterly about attempts to remove files from nonexistent directories. stable: update documentation to ask for kernel version base/core.c:fix typo in comment in function device_add Documentation: devres: add allocation functions to list of supported calls Documentation update for the driver model core kernel-doc: fix new warnings in driver-core kernel-doc: fix new warnings in debugfs kernel-doc: fix new warnings in device.h driver core: remove drivers/base/sys.c and include/linux/sysdev.h
-
git://github.com/rustyrussell/linuxLinus Torvalds authored
* tag 'for-linus' of git://github.com/rustyrussell/linux: lguest: remove reference from Documentation/virtual/00-INDEX virtio: correct the memory barrier in virtqueue_kick_prepare() virtio: fix typos of memory barriers
-
Linus Torvalds authored
Merge branch 'stable/for-linus-fixes-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/for-linus-fixes-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/granttable: Disable grant v2 for HVM domains. x86: xen: size struct xen_spinlock to always fit in arch_spinlock_t
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix reservations in btrfs_page_mkwrite Btrfs: advance window_start if we're using a bitmap btrfs: mask out gfp flags in releasepage Btrfs: fix enospc error caused by wrong checks of the chunk Btrfs: do not defrag a file partially Btrfs: fix warning for 32-bit build of fs/btrfs/check-integrity.c Btrfs: use cluster->window_start when allocating from a cluster bitmap Btrfs: Check for NULL page in extent_range_uptodate btrfs: Fix busyloops in transaction waiting code Btrfs: make sure a bitmap has enough bytes Btrfs: fix uninit warning in backref.c
-