- 19 Oct, 2018 1 commit
-
-
Mauro Carvalho Chehab authored
Those drivers are part of the legacy SoC camera framework. They're being converted to not use it, but sometimes we're keeping both legacy any new driver. This time, for example, we have two drivers on media with the same name: ov772x. That's bad. So, in order to prevent that to happen, let's prepend the SoC legacy drivers with soc_. No functional changes. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
- 15 Oct, 2018 1 commit
-
-
Hans Verkuil authored
If the wait for completion was interrupted, then make sure to cancel any delayed work. This can only happen if a transmit is waiting for a reply, and you press Ctrl-C or reboot/poweroff or something like that which interrupts the thread waiting for the reply and then proceeds to delete the CEC message. Since the delayed work wasn't canceled, once it would trigger it referred to stale data and resulted in a kernel oops. Fixes: 7ec2b3b9 ("cec: add new tx/rx status bits to detect aborts/timeouts") Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.18 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
- 09 Oct, 2018 13 commits
-
-
Keiichi Watanabe authored
Support 640x480 as a frame size for video input devices of vivid. Signed-off-by: Keiichi Watanabe <keiichiw@chromium.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
When the OSD is on (i.e. vivid displays text on top of the test pattern), and you enable hflip, then the driver crashes. The cause turned out to be a division of a negative number by an unsigned value. You expect that -8 / 2U would be -4, but in reality it is 2147483644 :-( Fixes: 3e14e7a8 ("vivid-tpg: add hor/vert downsampling support to tpg_gen_text") Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: <stable@vger.kernel.org> # for v4.1 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Bård Eirik Winther authored
New 16-bit bayer options are available in tpg so enable them in vivid. Signed-off-by: Bård Eirik Winther <bwinther@cisco.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Bård Eirik Winther authored
Add 16-bit bayer formats to the test pattern generator, namely V4L2_PIX_FMT_SRGGB16 V4L2_PIX_FMT_SGRBG16 V4L2_PIX_FMT_SGBRG16 V4L2_PIX_FMT_SBGGR16 Signed-off-by: Bård Eirik Winther <bwinther@cisco.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Dafna Hirschfeld authored
Replace calls to `printk` with the appropriate `pr_*` macro. Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Vikash Garodia authored
Existing code returns the max of the decoded size and buffer size. It turns out that buffer size is always greater due to hardware alignment requirement. As a result, payload size given to client is incorrect. This change ensures that the bytesused is assigned to actual payload size, when available. Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org> Acked-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Colin Ian King authored
Shifting the u8 value[3] by an int can lead to sign-extension overflow. For example, if value[3] is 0xff and the shift is 24 then it is promoted to int and then the top bit is sign-extended so that all upper 32 bits are set. Fix this by casting value[3] to a u32 before the shift. Detected by CoverityScan, CID#1016522 ("Unintended sign extension") Fixes: e0d3bafd ("V4L/DVB (10954): Add cx231xx USB driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Biju Das authored
Add compatible strings for r8a7744. No driver change is needed as "renesas,rcar-gen2-vin" will activate the right code.However, it is good practice to document compatible strings for the specific SoC as this allows SoC specific changes to the driver if needed, in addition to document SoC support and therefore allow checkpatch.pl to validate compatible string values. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Wenwen Wang authored
In isif_probe(), there is a while loop to get the ISIF base address and linearization table0 and table1 address. In the loop body, the function platform_get_resource() is called to get the resource. If platform_get_resource() returns NULL, the loop is terminated and the execution goes to 'fail_nobase_res'. Suppose the loop is terminated at the first iteration because platform_get_resource() returns NULL and the execution goes to 'fail_nobase_res'. Given that there is another while loop at 'fail_nobase_res' and i equals to 0, one iteration of the second while loop will be executed. However, the second while loop does not check the return value of platform_get_resource(). This can cause a NULL pointer dereference bug if the return value is a NULL pointer. This patch avoids the above issue by adding a check in the second while loop after the call to platform_get_resource(). Signed-off-by: Wenwen Wang <wang6495@umn.edu> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Colin Ian King authored
The const array config_ids can be made static, saves populating it on the stack and will make it read-only. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Colin Ian King authored
The const array addr_list can be made static, saves populating it on the stack and will make it read-only. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Colin Ian King authored
The const array addr_list can be made static, saves populating it on the stack and will make it read-only. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Colin Ian King authored
The const array addr_list can be made static, saves populating it on the stack and will make it read-only. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
- 08 Oct, 2018 4 commits
-
-
Nathan Chancellor authored
Clang warns that the address of a pointer will always evaluated as true in a boolean context. drivers/media/pci/cx18/cx18-driver.c:1255:23: warning: address of 'cx->streams[i].video_dev' will always evaluate to 'true' [-Wpointer-bool-conversion] if (&cx->streams[i].video_dev) ~~ ~~~~~~~~~~~~~~~^~~~~~~~~ 1 warning generated. Check whether v4l2_dev is null, not the address, so that the statement doesn't fire all the time. This check has been present since 2009, introduced by commit 21a278b8 ("V4L/DVB (11619): cx18: Simplify the work handler for outgoing mailbox commands") Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Sakari Ailus authored
v4l2_async_unregister_subdev() may not be called without v4l2_async_register_subdev() being called first. Fix this. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Sakari Ailus authored
If probe fails, the kernel will print the error code. There's no need to driver to do that. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Rajmohan Mani authored
Fixed the case where v4l2_async_unregister_subdev() is called unnecessarily in the error handling path in probe function. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
- 05 Oct, 2018 21 commits
-
-
Sean Young authored
An RC device is does not need to be called 'RC for'. Simply the name will suffice. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
If a receive is in progress or starts before the transmit has a chance, then lower the Signal Free Time of the upcoming transmit to no more than CEC_SIGNAL_FREE_TIME_NEW_INITIATOR. This is per the specification requirements. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
The calculation of the Signal Free Time in the framework was not correct. If a message was received, then the next transmit should be considered a New Initiator and use a shorter SFT value. This was not done with the result that if both sides where continually sending messages, they both could use the same SFT value and one side could deny the other side access to the bus. Note that this fix does not take the corner case into account where a receive is in progress when you call adap_transmit. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.18 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
When there is no EDID the CEC adapter should be unconfigured as well. So call cec_phys_addr_invalidate() when this happens. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.18 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
When there is no EDID the CEC adapter should be unconfigured as well. So call cec_phys_addr_invalidate() when this happens. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.18 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
If the HDMI cable is disconnected or the CEC adapter is manually unconfigured, then all pending transmits and wait-for-replies are aborted. Signal this with new status bits (CEC_RX/TX_STATUS_ABORTED). If due to (usually) a driver bug a transmit never ends (i.e. the transmit_done was never called by the driver), then when this times out the message is marked with CEC_TX_STATUS_TIMEOUT. This should not happen and is an indication of a driver bug. Without a separate status bit for this it was impossible to detect this from userspace. The 'transmit timed out' kernel message is now a warning, so this should be more prominent in the kernel log as well. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.18 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
Clarify that calling cec_transmit_done can start a new transmit and that you should put the hardware in a state that allows for a new transmit before calling this function. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Mauro Carvalho Chehab authored
As pointed at: https://bugzilla.kernel.org/show_bug.cgi?id=199323 This patch causes a bad effect on RPi. I suspect that the root cause is at the USB out of tree RPi driver, with uses high priority interrupts instead of normal ones. Anyway, as this patch is mostly a cleanup, better to revert it. This reverts commit 7d95fb74. Cc: stable@vger.kernel.org # For Kernel 4.18 Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hugues Fruchet authored
Changing framerate right before streamon had no effect, the new framerate value was taken into account only at next streamon, fix this. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Lubomir Rintel authored
When the "xclk" clock was added, it was made mandatory. This broke the driver on an OLPC plaform which doesn't know such clock. Make it optional. Tested on a OLPC XO-1 laptop. Fixes: 0a024d63 ("[media] ov7670: get xclk") Cc: stable@vger.kernel.org # 4.11+ Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Arnd Bergmann authored
The regmap change causes multiple warnings like drivers/media/i2c/ov9650.c: In function 'ov965x_g_volatile_ctrl': drivers/media/i2c/ov9650.c:889:29: error: 'reg2' may be used uninitialized in this function [-Werror=maybe-uninitialized] exposure = ((reg2 & 0x3f) << 10) | (reg1 << 2) | ~~~~~~~~~~~~~~~^~~~~~ It is apparently hard for the compiler to see here if ov965x_read() returned successfully or not. Besides, we have a v4l2_dbg() statement that prints an uninitialized value if regmap_read() fails. Adding an 'else' clause avoids the ambiguity. Fixes: 361f3803 ("media: ov9650: use SCCB regmap") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Mauro Carvalho Chehab authored
Function alignments are off by 1 space, as reported by checkpatch.pl --strict. Fix those. Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Bingbu Cao authored
Add a v4l2 sub-device driver for the Sony imx355 image sensor. This is a camera sensor using the i2c bus for control and the csi-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - 4 test patterns control support - vflip/hflip control support (will impact the output bayer order) - support following resolutions: - 3268x2448, 3264x2448, 3280x2464 @ 30fps - 1940x1096, 1936x1096, 1924x1080, 1920x1080 @ 60fps - 1640x1232, 1640x922, 1300x736, 1296x736, 1284x720, 1280x720 820x616 @ 120fps - support 4 bayer orders output (via change v/hflip) - SRGGB10(default), SGRBG10, SGBRG10, SBGGR10 [Sakari Ailus: Use do_div() for dividing 64-bit numbers, fix fwnode if usage] Cc: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Tianshu Qiu <tian.shu.qiu@intel.com> Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Mauro Carvalho Chehab authored
Function alignments are off by 1 space, as reported by checkpatch.pl --strict. Fix those. Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Bingbu Cao authored
Add a v4l2 sub-device driver for the Sony imx319 image sensor. This is a camera sensor using the i2c bus for control and the csi-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - 4 test patterns control support - vflip/hflip control support (will impact the output bayer order) - support following resolutions: - 3264x2448, 3280x2464 @ 30fps - 1936x1096, 1920x1080 @ 60fps - 1640x1232, 1640x922, 1296x736, 1280x720 @ 120fps - support 4 bayer orders output (via change v/hflip) - SRGGB10(default), SGRBG10, SGBRG10, SBGGR10 [Sakari Ailus: Replace 64-bit division by do_div(), fix fwnode if usage] Cc: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Tianshu Qiu <tian.shu.qiu@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Sakari Ailus authored
Sometimes it may be necessary to grab a control while holding the control handler's lock. Provide an unlocked variant of v4l2_ctrl_grab for the purpose --- it's called __v4l2_ctrl_grab. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Sakari Ailus authored
v4l2_ctrl_grab() is documented in the header; there's no need to have a comment explaining what the function does in the .c file. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Sakari Ailus authored
The driver for the dw9807 voice coil was renamed as dw9807-vcm.c to reflect the fact that the chip also contains an EEPROM. While there is no EEPROM (nor MFD) driver yet and it may not be ever even needed, the driver was renamed accordingly. But the MAINTAINERS entry was not. Fix this. Fixes: e6c17ada ("media: dw9807-vcm: Recognise this is just the VCM bit of the device") Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Marek Szyprowski authored
Commits 03fbdb2f ("media: move videobuf2 to drivers/media/common") and 7952be9b ("media: drivers/media/common/videobuf2: rename from videobuf") moved videobuf2 framework source code finally to drivers/media/common/videobuf2 directory, so update relevant paths in MAINTAINERS file. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Sean Young authored
There is no need to create another input device. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Sean Young authored
There is no need to create another input device. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-