- 27 Sep, 2018 6 commits
-
-
Yishai Hadas authored
IB has additional protections with SELinux that cannot be extended to the DEVX domain. SELinux can restrict access to pkeys. The first version of DEVX blocked IB entirely until this could be understood. Since DEVX requires CAP_NET_RAW, it supersedes the SELinux restriction and allows userspace to form arbitrary packets with arbitrary pkeys. Thus we enable IB for DEVX when CAP_NET_RAW is given. Signed-off-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Yishai Hadas authored
Enable DEVX white list commands without the need for CAP_NET_RAW. DEVX uid must exist from the ucontext or the device so that the firmware will mask unprivileged capabilities. Signed-off-by:
-
Yishai Hadas authored
Manage device uid for DEVX white list commands. The created device uid will be used on white list commands if the user didn't supply its own uid. This will enable the firmware to filter out non privileged functionality as of the recognition of the uid. Signed-off-by:
-
Yishai Hadas authored
Expose RAW QP device handles to user space by extending the UHW part of mlx5_ib_create_qp_resp. This data is returned only when DEVX context is used where it may be applicable. Signed-off-by:
-
Parav Pandit authored
Currently mmap_sem is read locked while pinning the memory. In a multi-threaded application of a process, holding mmap_sem lock creates contention with other threads who might be either registering memory, creating QPs or simply doing mmap() as such operations also require to hold the mmap_sem write lock. All such operation cannot make forward progress until one memory pin operation is completed. It becomes more worse if the memory is unpinned and/or memory registration is large (in GB range). Therefore, instead of holding mmap_sem for too long (for whole region pinning), acquire and release the lock for every few pages. For example on x86 with 4K page size, acquire and release mmap_sem for every 2Mbytes memory chunk. This allows other competing threads to make progress who might wish to hold mmap_sem for shorter duration. When memory registration latency is measured using [1] for memory sizes ranging from 4K to 48GB, <= 1% or 0.5% degradation is noticed. In many runs no difference is seen other than run-to-run variance. In other targeted tests of users with large memory, desired improvements are seen due to reduced contention of mmap_sem. [1] https://github.com/paravmellanox/rtool $ rdma_resource_lat -c 1 -s 48G -a -u L -i 500 -A It registers pinned memory from 4K to 48GB size with 500 iterations for each memory size. $ rdma_resource_lat -c 1 -s 12G -a -u L -i 500 -t 4 4 competing threads pin memory, each of 12GB size with 500 iterations. Signed-off-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in dev_err error message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 26 Sep, 2018 15 commits
-
-
Alex Estrin authored
rdma_nl_multicast() returns either negative error code or zero if succeeded. Remove unnecessary ret code checks and reassignments. Reviewed-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
Alex Estrin <alex.estrin@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by:
-
Michael J. Ruhl authored
The UnsupportedVL SendCtrl register bit information is defined in the module rather than the chip register header file. Move the defines to the appropriate header file. Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
-
Colin Ian King authored
The inner check for mdev->mthca_flags & MTHCA_FLAG_MSI_X is redundant as this is already true because of the previous identical check in an outer if statement. Remove it Detected by cppcheck: (warning) Identical inner 'if' condition is always true. Signed-off-by:
-
Yixian Liu authored
This patch adds memory window (mw) support in the kernel space. Signed-off-by:
Yixian Liu <liuyixian@huawei.com> Signed-off-by:
-
Lijun Ou authored
According to the hardware modification, the vlan of the UD packet is based on the ud_vlan_en field of the UD wqe to determine whether to add a vlan header to the UD packet. The ud_vlan_en field is filled by the driver according to the net device. Signed-off-by:
Lijun Ou <oulijun@huawei.com> Signed-off-by:
-
Lijun Ou authored
This patch mainly sets the vlan_id field in the WC for rdma_listen() to work over vlan. This is required by ib_init_ah_attr_from_wc() which is called by the CM REQ handler. Signed-off-by:
-
Lijun Ou authored
This patch adds atomic operations for hip08, includes fetchadd and cmpswap operation. In order to enable atomic, the driver needs to do the following steps: 1. Enable the atomic caps for RoCE device 2. Post the wqe context of atomic type 3. Configure the atomic type of mtpt Signed-off-by:
-
Lijun Ou authored
Currently the transport opcodes which come from users configuration is set by similar code. This patch simplifies it. Signed-off-by:
-
Jason Gunthorpe authored
These return the same thing but dev_name is a more conventional use of the kernel API. Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
-
Jason Gunthorpe authored
These return the same thing but dev_name is a more conventional use of the kernel API. Signed-off-by:
-
Jason Gunthorpe authored
These return the same thing but dev_name is a more conventional use of the kernel API. Signed-off-by:
-
Jason Gunthorpe authored
Kernel convention is that a driver for a subsystem will print using dev_* on the subsystem's struct device, or with dev_* on the physical device. Drivers should rarely use a pr_* function. Signed-off-by: -
Jason Gunthorpe authored
Any messages related to a device should be printed with the dev_* formatters. This provides greater consistency for the user. The core does not set pr_fmt so this has no significant change. Signed-off-by:
-
Jason Gunthorpe authored
The current code has two copies of the device name, ibdev->dev and dev_name(&ibdev->dev), and they are setup at different times, which is very confusing. Set them both up at the same time and make dev_name() the lead name, which is the proper use of the driver core APIs. To make it very clear that the name is not valid until registration pass it in to the ib_register_device() call rather than messing with ibdev->name directly. Also the reorganization now checks that dev_name is unique even if it does not contain a %. Signed-off-by:
Adit Ranadive <aditr@vmware.com> Reviewed-by:
Devesh Sharma <devesh.sharma@broadcom.com> Reviewed-by:
Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by:
-
Arnd Bergmann authored
The mlx4 driver produces a link error when it is configured as built-in while CONFIG_INFINIBAND_USER_ACCESS is set to =m: drivers/infiniband/hw/mlx4/main.o: In function `mlx4_ib_mmap': main.c:(.text+0x1af4): undefined reference to `rdma_user_mmap_io' The same function is called from mlx5, which already has a dependency to ensure we can call it, and from hns, which appears to suffer from the same problem. This adds the same dependency that mlx5 uses to the other two. Fixes: 6745d356 ("RDMA/hns: Use rdma_user_mmap_io") Fixes: c282da41 ("RDMA/mlx4: Use rdma_user_mmap_io") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
- 25 Sep, 2018 19 commits
-
-
Doug Ledford authored
Given a large enough memory allocation, it is possible to wrap the pinned_vm counter. Check for addition overflow to prevent such eventualities. Fixes: 40ddacf2 ("RDMA/umem: Don't hold mmap_sem for too long") Reported-by:
Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by:
Doug Ledford <dledford@redhat.com> Reviewed-by:
-
Doug Ledford authored
Noticed while reviewing commit d4b4dd1b ("RDMA/umem: Do not use current->tgid to track the mm_struct") patch. Why would we take a lock, adjust a protected variable, drop the lock, and *then* check the input into our protected variable adjustment? Then we have to take the lock again on our error unwind. Let's just check the input early and skip taking the locks needlessly if the input isn't valid. It was also noticed that we set mm = current->mm, we then never modify mm, but we still go back and reference current->mm a number of times needlessly. Be consistent in using the stored reference in mm. Signed-off-by:
-
Nathan Chancellor authored
Clang warns when one enumerated type is implicitly converted to another. drivers/infiniband/hw/cxgb4/qp.c:287:8: warning: implicit conversion from enumeration type 'enum t4_bar2_qtype' to different enumeration type 'enum cxgb4_bar2_qtype' [-Wenum-conversion] T4_BAR2_QTYPE_EGRESS, ^~~~~~~~~~~~~~~~~~~~ c4iw_bar2_addrs expects a value from enum cxgb4_bar2_qtype so use the corresponding values from that type so Clang is satisfied without changing the meaning of the code. T4_BAR2_QTYPE_EGRESS = CXGB4_BAR2_QTYPE_EGRESS = 0 T4_BAR2_QTYPE_INGRESS = CXGB4_BAR2_QTYPE_INGRESS = 1 Reported-by:Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Acked-by:
-
Mark Bloch authored
When profiles were introduced to MLX5 IB an unneeded version print when creating an MLX5 IB device was added. Remove the print, we still have a printk for driver version in mlx5_ib_add(). Fixes: 16c1975f ("IB/mlx5: Create profile infrastructure to add and remove stages") Signed-off-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in usnic_err error message. Signed-off-by:
-
Yishai Hadas authored
Set valid umem bit on DEVX commands that use umem. This will enforce the umem usage by the firmware and not the 'pas' info. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of TD commands so that the firmware can manage the TD object in a secured way. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of XRCD commands so that the firmware can manage the XRCD object in a secured way. That will enable using an XRCD that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of CQ creation so that the firmware can manage the CQ object in a secured way. The uid for the destroy and the modify commands is set by mlx5_core. This will enable using a CQ that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of PD allocation, this uid is used for other mlx5 objects upon calling the firmware. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of RQT commands so that the firmware can manage the RQT object in a secured way. That will enable using an RQT that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of TIS commands so that the firmware can manage the TIS object in a secured way. That will enable using a TIS that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of TIR commands so that the firmware can manage the TIR object in a secured way. That will enable using a TIR that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of MCG commands so that the firmware can manage the MCG object in a secured way. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of DCT create command so that the firmware can manage the DCT object in a secured way. The uid for the destroy and drain commands are set by mlx5_core. That will enable using a DCT that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of SRQ create command so that the firmware can manage the SRQ object in a secured way. The uid for the destroy and modify commands are set by mlx5_core. That will enable using a SRQ that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of SQ commands so that the firmware can manage the SQ object in a secured way. The uid for the destroy command is set by mlx5_core. This will enable using an SQ that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of RQ commands so that the firmware can manage the RQ object in a secured way. The uid for the destroy command is set by mlx5_core. This will enable using an RQ that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by:
-
Yishai Hadas authored
Set uid as part of QP creation so that the firmware can manage the QP object in a secured way. The uid for the destroy and the modify commands is set by mlx5_core. This will enable using a QP that was created by verbs application to be used by the DEVX flow in case the uid is equal. Signed-off-by:
-
