- 12 Mar, 2009 31 commits
-
-
Boaz Harrosh authored
Add support for the various List-objects commands. List-partitions-in-device, List-collections-in-partition, List-objects-in-partition, List-objects-in-collection. All these support partial listing and continuation. Add support for the different Flush commands and options. Signed-off-by:
Boaz Harrosh <bharrosh@panasas.com> Reviewed-by:
Benny Halevy <bhalevy@panasas.com> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
Boaz Harrosh authored
Layout the signing of OSD's CDB and all-data security modes. The actual code for signing the data and CDB is missing, but the code flow and the extra buffer segments are all in place. Signed-off-by:
-
Boaz Harrosh authored
Support for both List-Mode and Page-Mode osd attributes. One of these operations may be added to most other operations. Define the OSD standard's attribute pages constants and structures (osd_attributes.h) Signed-off-by:
-
Boaz Harrosh authored
Kernel clients like exofs can retrieve struct osd_dev(s) by means of below API. + osduld_path_lookup() - given a path (e.g "/dev/osd0") locks and returns the corresponding struct osd_dev, which is then needed for subsequent libosd use. + osduld_put_device() - free up use of an osd_dev. Devices can be shared by multiple clients. The osd_uld_device's life time is governed by an embedded kref structure. The osd_uld_device holds an extra reference to both it's char-device and it's scsi_device, and will release these just before the final deallocation. There are three possible lock sources of the osd_uld_device 1. First and for most is the probe() function called by scsi-ml upon a successful login into a target. Released in release() when logout. 2. Second by user-mode file handles opened on the char-dev. 3. Third is here by Kernel users. All three locks must be removed before the osd_uld_device is freed. The MODULE has three lock sources as well: 1. scsi-ml at probe() time, removed after release(). (login/logout) 2. The user-mode file handles open/close. 3. Import symbols by client modules like exofs. TODO: This API is not enough for the pNFS-objects LD. A more versatile API will be needed. Proposed API could be: struct osd_dev *osduld_sysid_lookup(const char id[OSD_SYSTEMID_LEN]); Signed-off-by:
-
Boaz Harrosh authored
Add a Linux driver module that registers as a SCSI ULD and probes for OSD type SCSI devices. When an OSD-type SCSI device is found a character device is created in the form of /dev/osdX - where X goes from 0 up to hard coded 64. The Major character device number used is 260. Signed-off-by:
-
Boaz Harrosh authored
Implementation of the most basic OSD functionality and infrastructure. Mainly Format, Create/Remove Partition, Create/Remove Object, and read/write. - Add Makefile and Kbuild to compile libosd.ko - osd_initiator.c Implementation file for osd_initiator.h and osd_sec.h APIs - osd_debug.h - Some kprintf macro definitions Signed-off-by:
-
Boaz Harrosh authored
Headers only patch. osd_protocol.h Contains a C-fied definition of the T10 OSD standard osd_types.h Contains CPU order common used types osd_initiator.h API definition of the osd_initiator library osd_sec.h Contains High level API for the security manager. [Note that checkpatch spews errors on things that are valid in this context and will not be fixed] Signed-off-by:
-
Boaz Harrosh authored
- Define the OSD_TYPE scsi device and let it show up in scans Signed-off-by:
-
Boaz Harrosh authored
Allocate major 260 for osd. Signed-off-by:
-
Tony Battersby authored
sg_io_owned needs to be set before the command is sent to the midlevel; otherwise, a quickly-completing command may cause a different CPU to see "srp->done == 1 && !srp->sg_io_owned", which would lead to incorrect behavior. Check srp->done and set srp->orphan while holding rq_list_lock to prevent races with sg_rq_end_io(). There is no need to check sfp->closed from read/write/ioctl/poll/etc. since the kernel guarantees that this won't happen. The usefulness of sg_srp_done() was questionable before; now it is definitely not needed. Signed-off-by:
Tony Battersby <tonyb@cybernetics.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Tony Battersby authored
sg has the following problems related to device removal: * opening a sg fd races with removing a device * closing a sg fd races with removing a device * /proc/scsi/sg/* access races with removing a device * command completion races with removing a device * command completion races with closing a sg fd * can rmmod sg with active commands These problems can cause kernel oopses, memory-use-after-free, or double-free errors. This patch fixes these problems by using krefs to manage the lifetime of sg_device and sg_fd. Each command submitted to the midlevel holds a reference to sg_fd until the completion callback. This ensures that sg_fd doesn't go away if the fd is closed with commands still outstanding. sg_fd gets the reference of sg_device (with scsi_device) and also makes sure that the sg module doesn't go away. /proc/scsi/sg/* functions don't play nicely with krefs because they give information about sg_fds which have been closed but not yet freed due to still having outstanding commands and sg_devices which have been removed but not yet freed due to still being referenced by one or more sg_fds. To deal with this safely without removing functionality, /proc functions now access sg_device and sg_fd while holding a lock instead of using kref_get()/kref_put(). Signed-off-by:
-
Ed Lin - PTU authored
Update version to 4.6.0000.1 Signed-off-by:
Ed Lin <ed.lin@promise.com> Signed-off-by:
-
Ed Lin - PTU authored
Some small fixes, including: - add data direction in req_msg because new firmware version may require this (backward compatible) - change internal timeout value - change judgment of type st_vsc1 - blank line handling, etc. Signed-off-by:
-
Ed Lin - PTU authored
This is the fix for controller type st_yosemite, including - max_lun is 256 (backward compatible) - remove unneeded special handling of INQUIRY - remove unnecessary listing of sub device ids Signed-off-by:
-
Ed Lin - PTU authored
Add new device id for controller type st_seq. Signed-off-by:
-
Ed Lin - PTU authored
The interrupt routine is good for normal cases. However, if the firmware is abnormal and returns an invalid response, the driver may reuse a ccb structure that has already been handled. This may cause problem. Fix this by setting the req member to NULL. Next time we know the response is invalid and handle accordingly if req is NULL. Signed-off-by:
-
James Bottomley authored
Fix up remaining bit of SUGGEST flag removal done by patch commit 0f10274300857d98ea5ea4c800c561a9ad9ac89f Author: Martin K. Petersen <martin.petersen@oracle.com> Date: Sun Jan 4 03:14:11 2009 -0500 [SCSI] Remove SUGGEST flags Signed-off-by: -
Martin K. Petersen authored
The SUGGEST_* flags in the SCSI command result have been out of fashion for a while and we don't actually use them in the error handling. Remove the remaining occurrences. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Wayne Boyer authored
Enable MSI if available/supported. Signed-off-by:
Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Christof Schmitt authored
Fix typo by adding closing parenthesis. Signed-off-by:
Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by:
-
Aaro Koskinen authored
(The patch updated based on testing and comments from Tony Battersby.) Change the sym53c8xx_2 driver negotiation logic so that the driver will tolerate better device removals. Negotiation message(s) will be sent with every INQUIRY and REQUEST SENSE command, and whenever there is a change in goals or when the device reports check condition. The patch was made specifically to address the case where you hotswap the disk using remove-single-device/add-single-device commands through /proc/scsi/scsi. Without the patch the driver keeps using old transfer parameters even though the target is reset and reports check condition, so the data transfer of the very first INQUIRY will fail. Signed-off-by:
Aaro Koskinen <Aaro.Koskinen@nokia.com> Tested-by:
-
Robert Love authored
The Kconfig entry for SCSI_LOGGING refers the reader to drivers/scsi/scsi.c, but I didn't find any useful information there. There is certainly logging code in that file, but the logging types and logging levels are described in drivers/scsi/scsi_logging.h. Also, the procfs file referred to in the section is incorrect. It should be /proc/sys/dev/scsi/logging_level and not /proc/scsi/scsi. Signed-off-by:
Robert Love <robert.w.love@intel.com> Signed-off-by:
-
Hannes Reinecke authored
scsi_device_online() is not just a negation of SDEV_OFFLINE, also devices in state SDEV_DEL are actually offline. Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Jan Engelhardt authored
Signed-off-by:
Jan Engelhardt <jengelh@medozas.de> Acked-by:
James Smart <James.Smart@Emulex.Com> Signed-off-by:
-
FUJITA Tomonori authored
I got the following warnings on IA64: drivers/scsi/libfc/fc_lport.c: In function 'fc_lport_recv_flogi_req': drivers/scsi/libfc/fc_lport.c:788: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'u64' drivers/scsi/libfc/fc_lport.c:792: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'u64' scsi/libfc/fc_rport.c: In function 'fc_rport_recv_plogi_req': /home/fujita/git/linux-2.6/drivers/scsi/libfc/fc_rport.c:968: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Robert Love <robert.w.love@intel.com> Signed-off-by:
-
Randy Dunlap authored
libfc uses crc32 functions, so cause it to be built via select: drivers/built-in.o: In function `fc_frame_crc_check': (.text+0x75dae): undefined reference to `crc32_le' drivers/built-in.o: In function `fc_fcp_recv': fc_fcp.c:(.text+0x7b919): undefined reference to `crc32_le' fc_fcp.c:(.text+0x7b9d5): undefined reference to `crc32_le' fc_fcp.c:(.text+0x7ba54): undefined reference to `crc32_le' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Acked-by:
-
Randy Dunlap authored
Fix scsi_debug build error: drivers/built-in.o: In function `resp_read': scsi_debug.c:(.text+0x21379a): undefined reference to `crc_t10dif' drivers/built-in.o: In function `resp_write': scsi_debug.c:(.text+0x213fca): undefined reference to `crc_t10dif' Signed-off-by:
-
Martin K. Petersen authored
This patch adds support for DIX and DIF in scsi_debug. A separate buffer is allocated for the protection information. - The dix parameter indicates whether the controller supports DIX (protection information DMA) - The dif parameter indicates whether the simulated storage device supports DIF - The guard parameter switches between T10 CRC(0) and IP checksum(1) - The ato parameter indicates whether the application tag is owned by the disk(0) or the OS(1) - DIF and DIX errors can be triggered using the scsi_debug_opts mask Signed-off-by:
-
Randy Dunlap authored
Warning(linux-2.6.28-git13//drivers/scsi/scsi_sysfs.c:1049): Excess function parameter 'dev' description in 'scsi_sysfs_add_host' Signed-off-by:
-
Matthew Wilcox authored
SES had its own code to retrieve VPD from devices; convert it to use the new scsi_get_vpd_page helper. Signed-off-by:
Matthew Wilcox <willy@linux.intel.com> Signed-off-by:
-
Matthew Wilcox authored
Based on prior work by Martin Petersen and James Bottomley, this patch adds a generic helper for retrieving VPD pages from SCSI devices. Signed-off-by:
-
- 10 Mar, 2009 9 commits
-
-
Andrew Vasquez authored
Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
Andrew Vasquez authored
The value is already pre-assigned prior to the qla2x00_mem_alloc(). Signed-off-by:
-
Andrew Vasquez authored
QLA_* return codes are 'int' in size. There were still several legacy check-points which assumed a return-code width of 8-bits. This could cause incorrect assumptions of 'good' status if a return of QLA_FUNCTION_TIMEOUT. Signed-off-by:
-
Anirban Chakraborty authored
Signed-off-by:
Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by:
-
Lalit Chandivade authored
Use minimum value for max vport during firmware initialization in LOOP topology. Using max vport value from get resource count in LOOP topology causes firmware initialization failure. Signed-off-by:
Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Robert Love authored
This change makes the fcoe Rx threads have the same nice value as lpfc and qla2xxx Rx threads. Signed-off-by:
-
Chris Leech authored
In fcoe_check_wait_queue() the queue length could temporarily drop to 0, before the last frame was successfully sent. This resulted in out of order data frames within a single sequence, leading to IO timeout errors. This builds on the approach from Vasu Dev to only fix the queue management in fcoe_check_wait_queue, where my first patch added locking to the transmit path even when the pending queue was not in use. This patch continues to use fcoe_pending_queue.qlen instead of introducing a new length counter, but takes precautions to ensure it never drops to 0 before the final frame in the queue has successfully been passed to the netdev qdisc layer. It also includes some cleanup of fcoe_check_wait_queue and removes the fcoe_insert_wait_queue(_head) wrapper functions. Signed-off-by:
Chris Leech <christopher.leech@intel.com> Signed-off-by:
-
Vasu Dev authored
frames followed by these errors in log. [sdp] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [sdp] Sense Key : Aborted Command [current] [sdp] Add. Sense: Data phase error This was causing some test apps to exit due to write failure under heavy load. This was due to a race around adding and removing tx frame skb in fcoe_pending_queue, Chris Leech helped me to find that brief unlocking period when pulling skb from fcoe_pending_queue in various contexts (fcoe_watchdog and fcoe_xmit) and then adding skb back into fcoe_pending_queue up on a failed fcoe_start_io could change skb/tx frame order in fcoe_pending_queue. Thanks Chris. This patch allows only single context to pull skb from fcoe_pending_queue at any time to prevent above described ordering issue/race by use of fcoe_pending_queue_active flag. This patch simplified fcoe_watchdog with modified fcoe_check_wait_queue by use of FCOE_LOW_QUEUE_DEPTH instead previously used several conditionals to clear and set lp->qfull. I think FCOE_MAX_QUEUE_DEPTH with FCOE_LOW_QUEUE_DEPTH will work better in re/setting lp->qfull and these could be fine tuned for performance. Signed-off-by:
Vasu Dev <vasu.dev@intel.com> Signed-off-by:
-
