Spotted by coccinelle:
drivers/gpu/drm/nouveau/core/subdev/fuse/gm107.c:50:5-8: WARNING: end returns can be simpified
Signed-off-by: Martin Peres <martin.peres@free.fr>
Reviewed-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

imx-drm changes to use media bus formats and LDB drm_panel support

- Add media bus formats needed by imx-drm
- Switch to use media bus formats to describe the pixel format
  on the internal parallel bus between display interface and
  encoders
- Some preparations for TV Output via TVEv2 on i.MX5
- Add drm_panel support to the i.MX LVDS driver, allow to
  determine the bus pixel format from the panel descriptor.

* tag 'imx-drm-next-2015-03-31' of git://git.pengutronix.de/git/pza/linux:
  drm/imx: imx-ldb: allow to determine bus format from the connected panel
  drm/imx: imx-ldb: reset display clock input when disabling LVDS
  drm/imx: imx-ldb: add drm_panel support
  drm/imx: consolidate bus format variable names
  drm/imx: switch to use media bus formats
  Add RGB666_1X24_CPADHI media bus format
  Add YUV8_1X24 media bus format
  Add BGR888_1X24 and GBR888_1X24 media bus formats
  Add LVDS RGB media bus formats
  Add RGB444_1X12 and RGB565_1X16 media bus formats
  drm/imx: ipuv3-crtc: Allow to divide DI clock from TVEv2
  drm/imx: Add support for interlaced scanout

drm: Use of-graph helpers to loop over endpoints

Convert all drm callers that use of_graph_get_next_endpoint to loop over
of-graph endpoints to the newly introduced for_each_endpoint_of_node
helper macro.

* tag 'of-graph-drm-2015-04-08' of git://git.pengutronix.de/git/pza/linux:
  drm/rockchip: use for_each_endpoint_of_node macro, drop endpoint reference on break
  drm/rcar-du: use for_each_endpoint_of_node macro
  drm/imx: use for_each_endpoint_of_node macro in imx_drm_encoder_get_mux_id
  drm: use for_each_endpoint_of_node macro in drm_of_find_possible_crtcs
  of: Explicitly include linux/types.h in of_graph.h
  dt-bindings: brcm: rationalize Broadcom documentation naming
  of/unittest: replace 'selftest' with 'unittest'
  Documentation: rename of_selftest.txt to of_unittest.txt
  Documentation: update the of_selftest.txt
  dt: OF_UNITTEST make dependency broken
  MAINTAINERS: Pantelis Antoniou device tree overlay maintainer
  of: Add of_graph_get_port_by_id function
  of: Add for_each_endpoint_of_node helper macro
  of: Decrement refcount of previous endpoint in of_graph_get_next_endpoint

Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

   This pull request contains just cleanup for atomic pageflip/modeset
   support, and some fixeups.

   We wanted to merge atomic pageflip/modeset feature support, new drivers
   - MIC and DECON for exynos5433 SoC - and relevant patches this time.
   However, I'd found that these features are not only safe enough
   but also aren't tested yet. So for them, I'd like to have enough times
   for the reviews.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: Fix FIMD buffer size calculation
  drm/exynos: Enable DP clock to fix display on Exynos5250 and other
  drm/exynos: fimd: check whether exynos_drm_crtc_create succeed or not
  drm/exynos: dsi: remove the empty mode_valid callback
  drm/exynos: add ratio calculation
  drm/exynos: use src_x and src_y instead of fb_x and fb_y
  drm/exynos: mixer: add 2x scaling to mixer_graph_buffer
  drm/exynos: remove superfluous error messages
  drm/exynos: fix typos in hdmi and mixer
  drm/exynos/ipp: Validate buffer enqueue requests
  drm/exynos: track vblank events on a per crtc basis
  drm/exynos: remove leftover functions declarations
  drm/exynos: remove exynos_plane_destroy()
  drm/exynos: make zpos property immutable
  drm/exynos: preset zpos value for overlay planes
  drm/exynos: remove struct *_win_data abstraction on planes
  drm/exynos: remove unused exynos_crtc->win_enable() callback
  drm/exynos: fimd: fix alpha setting for XR24 pixel format

Commit adacb228 ("drm: Exynos: Respect framebuffer pitch for
FIMD/Mixer") fixed the buffer size calculation by using the FB
pitch value but later commit 26b9c2813ede1 ("drm/exynos: remove
struct *_win_data abstraction on planes") added a regression so
fix the buffer size calculation again.

Tested on Chromebook Snow / Peach Pit.

Fixes: 26b9c2813ede1 ("drm/exynos: remove struct *_win_data abstraction on planes")
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

After adding display power domain for Exynos5250 in commit
2d2c9a8d ("ARM: dts: add display power domain for exynos5250") the
display on Chromebook Snow and others stopped working after boot.

The reason for this suggested Andrzej Hajda: the DP clock was disabled.
This clock is required by Display Port and is enabled by bootloader.
However when FIMD driver probing was deferred, the display power domain
was turned off. This effectively reset the value of DP clock enable
register.

When exynos-dp is later probed, the clock is not enabled and display is
not properly configured:

exynos-dp 145b0000.dp-controller: Timeout of video streamclk ok
exynos-dp 145b0000.dp-controller: unable to config video

Fixes: 2d2c9a8d ("ARM: dts: add display power domain for exynos5250")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reported-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

>From the commit "drm/exynos: fix the execution order in FIMD
initialization" (598285bfdce46d7c47632a2ba4b980f60be4a677), the error
checking code is removed improperly. This patch fix the regression.
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Because the helper function which calls this callback checks whether
it is registered or not. It is not necessary if it does nothing.
So it would be better to remove the function for clarity.
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Calculation ratio from exynos_drm plane codes, then each hw drivers can
use it without extra operation. Also this fixes width and height of
source used for actual crtc shown via screen.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

It's more reasonable to use src_x and src_y to represent source as
counterpart of destination(crtc). Already we are using src_width and
src_height for width and height of source.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

While the VP (video processor) supports arbitrary scaling
of its input, the mixer just supports a simple 2x (line
doubling) scaling. Expose this functionality and exit
early when an unsupported scaling configuration is
encountered.

This was tested with modetest's DRM plane test (from
the libdrm test suite) on an Odroid-X2 (Exynos4412).

v2: Put if- and return-statement on different lines.
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The messages are redundant since 'check_fb_gem_memory_type'
already prints out exactly the same string when it fails.
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Use the correct spelling for 'progressive'.
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

As for now there is no validation of incoming buffer
enqueue request as far as the gem buffers are being
concerned. This might lead to some undesired cases
when the driver tries to operate on invalid buffers
(wiht no valid gem object handle i.e.).
Add some basic checks to rule out those potential issues.
Signed-off-by: Beata Michalska <b.michalska@samsung.com>
[mszyprow: rebased onto v4.0-rc1 and adapted to recent ipp changes]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The goal of the change is to make sure we send the vblank event on the
current vblank. My hope is to fix any races that might be causing flicker.
After this change I only see a flicker in the transition plymouth and
X11.

Simplified the code by tracking vblank events on a per-crtc basis. This
allowed me to remove all error paths from the callback. It also allowed
me to remove the vblank wait from the callback.
Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

These functions were already removed by previous cleanup work, but these
ones were left behind.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The .destroy() callback for exynos can be replaced by drm_plane_cleanup().
The only extra operation on exynos_plane_destroy() was a call to
exynos_plane_disable() but the plane is already disabled by a earlier call
to drm_framebuffer_remove().
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

We already set each plane zpos at init, after that changes to zpos are
not expected. This patch turns zpos into a read-only property so now it is
impossible to set zpos.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Usually userspace don't want to have two overlay planes on the same zpos
so this change assign a different zpos for each plane. Before this change
a zpos of value zero was created for all planes so the userspace had to
set up the zpos of every plane it wanted to use.

Also all places that were storing zpos positions are now unsigned int.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

struct {fimd,mixer,vidi}_win_data was just keeping the same data
as struct exynos_drm_plane thus get ride of it and use exynos_drm_plane
directly.

It changes how planes are created and remove .win_mode_set() callback
that was only filling all *_win_data structs.

v2: check for return of exynos_plane_init()
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

None of the exynos crtc drivers implements win_enable() so remove it for
better clarity of the code.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

XR24 planes were not shown properly, so now set the right registers
to correctly enable displaying these planes.

It also moves the alpha register settings to fimd_win_set_pixfmt()
to keep all pixel format stuff together.

v2: remove leftover var alpha
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Linux 4.0-rc7

Requested by Alex for fixes -next needs.

Conflicts:
	drivers/gpu/drm/i915/intel_sprite.c

Using the for_each_... macro should make the code a bit shorter and
easier to read. Also, when breaking out of the loop, the endpoint node
reference count needs to be decremented.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>

Using the for_each_... macro should make the code a bit shorter and
easier to read.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Using the for_each_... macro should make the code bit shorter and
easier to read. This patch also properly decrements the endpoint node
reference count before returning out of the loop.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Using the for_each_... macro should make the code a bit shorter and
easier to read.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

imx-drm limit fixes

Fix IPU IC downscaler to its hardware limitation of 4:1 and the
IPU DI pixel clock divider integer part to 8-bit.

* tag 'imx-drm-fixes-2015-03-31' of git://git.pengutronix.de/git/pza/linux:
  gpu: ipu-v3: turns out the IPU can only downsize 4:1
  gpu: ipu-v3: limit pixel clock divider to 8-bits
  drm/radeon: programm the VCE fw BAR as well
  drm/radeon: always dump the ring content if it's available
  radeon: Do not directly dereference pointers to BIOS area.
  drm/radeon/dpm: fix 120hz handling harder

1) support for "stolen mem" for splash-screen take-over
2) additional hdmi pixel clks
3) various pipe flush related fixes
4) support for snapdragon 410 (8x16)
5) support for DSI and dual-DSI

It includes one small patch to export tile-group functions (which was ack'd
by you), as these are used to explain to userspace dual-dsi configurations
(with left and right tile).

* 'msm-next' of git://people.freedesktop.org/~robclark/linux: (24 commits)
  drm/msm/mdp5: Enable DSI connector in msm drm driver
  drm/msm: Initial add DSI connector support
  drm/msm: Add split display interface
  drm/msm/mdp5: Move *_modeset_init out of construct_encoder function
  drm: export tile-group functions
  drm/msm/mdp5: Remove CTL flush dummy bits
  drm/msm/mdp5: Update headers (add CTL flush bits)
  drm/msm/mdp5: Add hardware configuration for msm8x16
  drm/msm/mdp5: Get SMP client list from mdp5_cfg
  drm/msm/mdp5: Update headers (remove enum mdp5_client_id)
  drm/msm/mdp5: Separate MDP5 domain from MDSS domain
  drm/msm/mdp5: Update headers (introduce MDP5 domain)
  drm/msm/dsi: Update generated DSI header file
  drm/msm/mdp5: Fix PIPE source image size settings
  drm/msm/mdp5: Update generated mdp5 header file with DSI support
  drm/msm/mdp5: Add pingpong entry to mdp5 config table
  drm/msm/mdp5: Make the intf connection in config module
  drm/msm/mdp5: Add START signal to kick off certain pipelines
  drm/msm/mdp5: Enhance operation mode for pipeline configuration
  drm/msm/mdp5: Update generated header files
  ...

drm/panel: Changes for v4.1-rc1

This set of changes adds support for a whole bunch of new panels, mostly
simple ones. There's now also support for panels to provide display
timings rather than fixed modes, which should allow panels to work with
a larger number of display drivers. Eventually drivers should migrate to
this new interface and the fixed modes removed from panels.

There are also a couple of sparse fixes for the PS8622 and PS8625 bridge
drivers.

* tag 'drm/panel/for-4.1-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/panel: Add support for Ampire AM-800480R3TMQW-A1H 800x480 7" panel
  of: Add vendor prefix for Ampire Co., Ltd.
  drm/panel: Add display timing for HannStar HSD070PWW1
  drm/panel: simple: Add display timing support
  drm/panel: Add display timing support
  drm/panel: Add support for OrtusTech COM43H4M85ULC panel
  of: Add vendor prefix for Ortus Technology Co., Ltd.
  drm/panel: Add bus format for Giantplus GPG482739QS5 panel
  drm/panel: simple: Add support for AUO b101ean01 panel
  drm/panel: simple: Add support for Innolux ZJ070NA-01P
  drm/panel: simple: Add support for Innolux AT043TN24
  drm/panel: simple: Add support for Shelly SCA07010-BFN-LNN
  drm/panel: simple: Add support for Samsung LTN140AT29 panel
  drm: Remove unused DRM_MODE_OBJECT_BRIDGE
  drm/bridge: ptn3460: Fix sparse warnings
  drm/bridge: ps8622: Fix sparse warnings
  drm/bridge: Add I2C based driver for ps8622/ps8625 bridge

drm/tegra: Changes for v4.1-rc1

Perhaps the most noteworthy change in this set is the implementation of
a hardware VBLANK counter using host1x syncpoints. The SOR registers can
now be dumped via debugfs, which can be useful while debugging. The IOVA
address space maintained by the driver can also be dumped via debugfs.

Other than than, these changes are mostly cleanup work, such as making
register names more consistent or removing unused code (that was left
over after the atomic mode-setting conversion). There's also a fix for
eDP that makes the driver cope with firmware that already initialized
the display (such as the firmware on the Tegra-based Chromebooks).

* tag 'drm/tegra/for-4.1-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/tegra: sor: Reset during initialization
  drm/tegra: gem: Return 64-bit offset for mmap(2)
  drm/tegra: hdmi: Name register fields consistently
  drm/tegra: hdmi: Resets are synchronous
  drm/tegra: dc: Document tegra_dc_state_setup_clock()
  drm/tegra: dc: Remove unused callbacks
  drm/tegra: dc: Remove unused function
  drm/tegra: dc: Use base atomic state helpers
  drm/atomic: Add helpers for state-subclassing drivers
  drm/tegra: dc: Implement hardware VBLANK counter
  gpu: host1x: Export host1x_syncpt_read()
  drm/tegra: sor: Dump registers via debugfs
  drm/tegra: sor: Registers are 32-bit
  drm/tegra: Provide debugfs file for the IOVA space
  drm/tegra: dc: Check for valid parent clock

omapdrm changes for 4.1

* universal plane support
* refactoring to prepare work atomic modesetting work
* a lot of small fixes

* tag 'omapdrm-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (36 commits)
  drm/omap: tiler: add hibernation callback
  drm/omap: add hibernation callbacks
  drm/omap: keep ref to old_fb
  drm/omap: fix race conditon in DMM
  drm/omap: fix race condition with dev->obj_list
  drm/omap: do not use BUG_ON(!spin_is_locked(x))
  drm/omap: only ignore DIGIT SYNC LOST for TV output
  drm/omap: fix race with error_irq
  drm/omap: use DRM_ERROR_RATELIMITED() for error irqs
  drm/omap: stop connector polling during suspend
  drm/omap: remove dummy PM functions
  drm/omap: tiler: fix race condition with engine->async
  drm/omap: fix plane's channel selection
  drm/omap: fix TILER on OMAP5
  drm/omap: handle incompatible buffer stride and pixel size
  drm/omap: fix error handling in omap_framebuffer_create()
  drm/omap: fix operation without fbdev
  drm/omap: add a comment why locking is missing
  drm/omap: add pin refcounting to omap_framebuffer
  drm/omap: clear omap_obj->paddr in omap_gem_put_paddr()
  ...

   These are based on drm-next branch, fix some drm/rockchip problem.
   Please pull them.

* 'drm-next0401' of git://github.com/markyzq/kernel-drm-rockchip:
  drm/rockchip: vop: add vop power domain support
  drm: rockchip: Turn off VT switching on suspend
  drm/rockchip: register all connectors after bind
  drm/rockchip: fix clk enable disable mismatch in vop_crtc_mode_set

Pull networking fixes from David Miller:

 1) In TCP, don't register an FRTO for cumulatively ACK'd data that was
    previously SACK'd, from Neal Cardwell.

 2) Need to hold RNL mutex in ipv4 multicast code namespace cleanup,
    from Cong WANG.

 3) Similarly we have to hold RNL mutex for fib_rules_unregister(), also
    from Cong WANG.

 4) Revert and rework netns nsid allocation fix, from Nicolas Dichtel.

 5) When we encapsulate for a tunnel device, skb->sk still points to the
    user socket.  So this leads to cases where we retraverse the
    ipv4/ipv6 output path with skb->sk being of some other address
    family (f.e. AF_PACKET).  This can cause things to crash since the
    ipv4 output path is dereferencing an AF_PACKET socket as if it were
    an ipv4 one.

    The short term fix for 'net' and -stable is to elide these socket
    checks once we've entered an encapsulation sequence by testing
    xmit_recursion.

    Longer term we have a better solution wherein we pass the tunnel's
    socket down through the output paths, but that is way too invasive
    for 'net' and -stable.

    From Hannes Frederic Sowa.

 6) l2tp_init() failure path forgets to unregister per-net ops, from
    Cong WANG.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net/mlx4_core: Fix error message deprecation for ConnectX-2 cards
  net: dsa: fix filling routing table from OF description
  l2tp: unregister l2tp_net_ops on failure path
  mvneta: dont call mvneta_adjust_link() manually
  ipv6: protect skb->sk accesses from recursive dereference inside the stack
  netns: don't allocate an id for dead netns
  Revert "netns: don't clear nsid too early on removal"
  ip6mr: call del_timer_sync() in ip6mr_free_table()
  net: move fib_rules_unregister() under rtnl lock
  ipv4: take rtnl_lock and mark mrt table as freed on namespace cleanup
  tcp: fix FRTO undo on cumulative ACK of SACKed range
  xen-netfront: transmit fully GSO-sized packets

Commit 1daa4303 ("net/mlx4_core: Deprecate error message at
ConnectX-2 cards startup to debug") did the deprecation only for port 1
of the card. Need to deprecate for port 2 as well.

Fixes: 1daa4303 ("net/mlx4_core: Deprecate error message at ConnectX-2 cards startup to debug")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to description in 'include/net/dsa.h', in cascade switches
configurations where there are more than one interconnected devices,
'rtable' array in 'dsa_chip_data' structure is used to indicate which
port on this switch should be used to send packets to that are destined
for corresponding switch.

However, dsa_of_setup_routing_table() fills 'rtable' with port numbers
of the _target_ switch, but not current one.

This commit removes redundant devicetree parsing and adds needed port
number as a function argument. So dsa_of_setup_routing_table() now just
looks for target switch number by parsing parent of 'link' device node.

To remove possible misunderstandings with the way of determining target
switch number, a corresponding comment was added to the source code and
to the DSA device tree bindings documentation file.

This was tested on a custom board with two Marvell 88E6095 switches with
following corresponding routing tables: { -1, 10 } and { 8, -1 }.
Signed-off-by: Pavel Nakonechny <pavel.nakonechny@skitlab.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull input fixes from Dmitry Torokhov:
 "Updates for the input subsystem - two more tweaks for ALPS driver to
  work out kinks after splitting the touchpad, trackstick, and potential
  external PS/2 mouse into separate input devices.

  Changes to support ALPS SS4 devices (protocol V8) will be coming in
  4.1..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: alps - document stick behavior for protocol V2
  Input: alps - report V2 Dualpoint Stick events via the right evdev node
  Input: alps - report interleaved bare PS/2 packets via dev3

Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mvneta_adjust_link() is a callback for of_phy_connect() and should
not be called directly. The result of calling it directly is as below:
Signed-off-by: David S. Miller <davem@davemloft.net>