is_sensor_enabled() checks if the sensors are enabled on this platform.
It is possible that the SoC might choose not to enable all the sensors
that the IP block is capable of supporting.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

We print a calibration failure message on -EPROBE_DEFER from
nvmem/qfprom as follows:
[    3.003090] qcom-tsens 4a9000.thermal-sensor: version: 1.4
[    3.005376] qcom-tsens 4a9000.thermal-sensor: tsens calibration failed
[    3.113248] qcom-tsens 4a9000.thermal-sensor: version: 1.4

This confuses people when, in fact, calibration succeeds later when
nvmem/qfprom device is available. Don't print this message on a
-EPROBE_DEFER.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Code cleanup making it easier to read
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

As we add support for newer versions of the TSENS IP, the current
approach isn't scaling because registers and bitfields get moved around,
requiring platform-specific hacks in the code. By moving to regmap, we
can hide the register level differences away from the code.

Define a common set of registers and bit-fields that we care about
across the various tsens IP versions.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

8974 and 8916 have the same version of the TSENS IP. Merge the files to
allow for better code reuse.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Some #defines in tsens-v_0_1.c clash with those in tsens-8974.c. Prefix
them with 8916 to avoid the clash so we can merge the two files.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

8916 and 8974 use v0.1.0 of the TSENS IP. Rename tsens-8916 to prepare
it for merging with tsens-8974 in a later commit.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

check_patch complains a lot as follows:

WARNING: function definition argument 'struct tsens_priv *' should also have an identifier name
+       int (*init)(struct tsens_priv *);

Fix it.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

tsens_get_temp() uses the name 'data' for the void pointer, use the same
in tsens_get_trend() for consistency.

Remove a stray space while we're at it.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

tmdev seems to imply that this is a device pointer when in fact it is
just private platform data for each tsens device. Rename it to priv
improve code readability.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Rename to tsens_priv to denote that it is private data for each tsens
instance.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Rename to tsens_plat_data to denote that it is platform-data passed in
at compile-time.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Describe how the TSENS device and the various sensors connected to it
are described in the driver
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Formatting of Kconfig files doesn't look so pretty, so just
take damp cloth and clean it up.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Define pr_fmt macro to add a prefix to the message,
this can make the thermal log better recognized.

Before:

[    0.602672] nfc: nfc_init: NFC Core ver 0.1
[    0.602828] NET: Registered protocol family 39
[    0.603435] clocksource: Switched to clocksource mct-frc
[    0.746216] failed to build thermal zone cpu-thermal: -22
[    0.746451] NET: Registered protocol family 2

After:

[    0.602804] NET: Registered protocol family 39
[    0.603463] clocksource: Switched to clocksource mct-frc
[    0.746309] thermal_sys: failed to build thermal zone cpu-thermal: -22
[    0.746545] NET: Registered protocol family 2
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Parse Over Current settings from DT and program them to
generate interrupts. Also enable hw throttling whenever
there are OC events. Log the OC events as debug messages.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Add OC HW throttle configuration for soctherm in DT.
It is used to describe the OCx throttle events.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Add support to generate OC (over-current) interrupts to
indicate the OC event and print out alarm messages.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Implement set_trips ops to set passive trip points.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Support to generate an interrupt when the temperature
crosses a programmed threshold and notify the thermal framework.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Add support to trigger pulse skippers on the GPU
when a HOT trip point is triggered. The pulse skippers
can be signalled to throttle at low, medium and high
depths\levels.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Add "nvidia,gpu-throt-level" property to set gpu hw
throttle level.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Currently the critical trip points in thermal framework are the only
way to specify a temperature at which HW should shutdown. This is
insufficient for certain platforms which would want an orderly
software shutdown in addition to HW shutdown.

This change support to parse "nvidia, thermtrips" property,
it allows soctherm DT to specify thermtrip temperatures so that
critical trip points framework can be used for doing software
shutdown.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Add optional property "nvidia,thermtrips".
If present, these trips will be used as HW shutdown trips,
and critical trips will be used as SW shutdown trips.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Pull ARM fixes from Russell King:
 "A small number of ARM fixes

   - Fix function tracer and unwinder dependencies so that we don't end
     up building kernels that will crash

   - Fix ARMv7M nommu initialisation (missing register initialisation)

   - Fix EFI decompressor entry (ensuring barrier instructions are
     enabled prior to use)"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8857/1: efi: enable CP15 DMB instructions before cleaning the cache
  ARM: 8856/1: NOMMU: Fix CCR register faulty initialization when MPU is disabled
  ARM: fix function graph tracer and unwinder dependencies

Pull powerpc fixes from Michael Ellerman:
 "A one-liner to make our Radix MMU support depend on HUGETLB_PAGE. We
  use some of the hugetlb inlines (eg. pud_huge()) when operating on the
  linear mapping and if they're compiled into empty wrappers we can
  corrupt memory.

  Then two fixes to our VFIO IOMMU code. The first is not a regression
  but fixes the locking to avoid a user-triggerable deadlock.

  The second does fix a regression since rc1, and depends on the first
  fix. It makes it possible to run guests with large amounts of memory
  again (~256GB).

  Thanks to Alexey Kardashevskiy"

* tag 'powerpc-5.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm_iommu: Allow pinning large regions
  powerpc/mm_iommu: Fix potential deadlock
  powerpc/mm/radix: Make Radix require HUGETLB_PAGE

Pull block fixes from Jens Axboe:
 "A set of io_uring fixes that should go into this release. In
  particular, this contains:

   - The mutex lock vs ctx ref count fix (me)

   - Removal of a dead variable (me)

   - Two race fixes (Stefan)

   - Ring head/tail condition fix for poll full SQ detection (Stefan)"

* tag 'for-linus-20190428' of git://git.kernel.dk/linux-block:
  io_uring: remove 'state' argument from io_{read,write} path
  io_uring: fix poll full SQ detection
  io_uring: fix race condition when sq threads goes sleeping
  io_uring: fix race condition reading SQ entries
  io_uring: fail io_uring_register(2) on a dying io_uring instance

Pull rdma fixes from Jason Gunthorpe:
 "One core bug fix and a few driver ones

   - FRWR memory registration for hfi1/qib didn't work with with some
     iovas causing a NFSoRDMA failure regression due to a fix in the NFS
     side

   - A command flow error in mlx5 allowed user space to send a corrupt
     command (and also smash the kernel stack we've since learned)

   - Fix a regression and some bugs with device hot unplug that was
     discovered while reviewing Andrea's patches

   - hns has a failure if the user asks for certain QP configurations"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/hns: Bugfix for mapping user db
  RDMA/ucontext: Fix regression with disassociate
  RDMA/mlx5: Use rdma_user_map_io for mapping BAR pages
  RDMA/mlx5: Do not allow the user to write to the clock page
  IB/mlx5: Fix scatter to CQE in DCT QP creation
  IB/rdmavt: Fix frwr memory registration

Pull dmaengine fixes from Vinod Koul:

 - fix for wrong register use in mediatek driver

 - fix in sh driver for glitch is tx_status and treating 0 a valid
   residue for cyclic

 - fix in bcm driver for using right memory allocation flag

* tag 'dmaengine-fix-5.1-rc7' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: mediatek-cqdma: fix wrong register usage in mtk_cqdma_start
  dmaengine: sh: rcar-dmac: Fix glitch in dmaengine_tx_status
  dmaengine: sh: rcar-dmac: With cyclic DMA residue 0 is valid
  dmaengine: bcm2835: Avoid GFP_KERNEL in device_prep_slave_sg

Pull input fixes from Dmitry Torokhov:
 "Just a couple of fixups for Synaptics RMI4 driver and allowing
  snvs_pwrkey to be selected on more boards"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics-rmi4 - write config register values to the right offset
  Input: synaptics-rmi4 - fix possible double free
  Input: snvs_pwrkey - make it depend on ARCH_MXC

Pull x86 fixes from Ingo Molnar:

 - Fix an early boot crash in the RSDP parsing code by effectively
   turning off the parsing call - we ran out of time but want to fix the
   regression. The more involved fix is being worked on.

 - Fix a crash that can trigger in the kmemlek code.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Fix a crash with kmemleak_scan()
  x86/boot: Disable RSDP parsing temporarily

Pull scheduler fix from Ingo Molnar:
 "Fix a division by zero bug that can trigger in the NUMA placement
  code"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/numa: Fix a possible divide-by-zero

Pull perf fix from Ingo Molnar:
 "A cstate event enumeration fix for Kaby/Coffee Lake CPUs"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Update KBL Package C-state events to also include PC8/PC9/PC10 counters

This way, slhc_free() accepts what slhc_init() returns, whether that is
an error or not.

In particular, the pattern in sl_alloc_bufs() is

        slcomp = slhc_init(16, 16);
        ...
        slhc_free(slcomp);

for the error handling path, and rather than complicate that code, just
make it ok to always free what was returned by the init function.

That's what the code used to do before commit 4ab42d78 ("ppp, slip:
Validate VJ compression slot parameters completely") when slhc_init()
just returned NULL for the error case, with no actual indication of the
details of the error.

Reported-by: syzbot+45474c076a4927533d2e@syzkaller.appspotmail.com
Fixes: 4ab42d78 ("ppp, slip: Validate VJ compression slot parameters completely")
Acked-by: Ben Hutchings <ben@decadent.org.uk>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge misc fixes from Andrew Morton:
 "9 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  fs/proc/proc_sysctl.c: Fix a NULL pointer dereference
  mm/page_alloc.c: fix never set ALLOC_NOFRAGMENT flag
  mm/page_alloc.c: avoid potential NULL pointer dereference
  mm, page_alloc: always use a captured page regardless of compaction result
  mm: do not boost watermarks to avoid fragmentation for the DISCONTIG memory model
  lib/test_vmalloc.c: do not create cpumask_t variable on stack
  lib/Kconfig.debug: fix build error without CONFIG_BLOCK
  zram: pass down the bvec we need to read into in the work struct
  mm/memory_hotplug.c: drop memory device reference after find_memory_block()

Currently any changed config register values don't take effect, as the
function to write them back is called with the wrong register offset.

Fixes: ff8f8370 (Input: synaptics-rmi4 - add support for 2D
                     sensors and F11)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull arm64 fixes from Catalin Marinas:

 - keep the tail of an unaligned initrd reserved

 - adjust ftrace_make_call() to deal with the relative nature of PLTs

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/module: ftrace: deal with place relative nature of PLTs
  arm64: mm: Ensure tail of unaligned initrd is reserved

Pull tracing fixes from Steven Rostedt:
 "Three tracing fixes:

   - Use "nosteal" for ring buffer splice pages

   - Memory leak fix in error path of trace_pid_write()

   - Fix preempt_enable_no_resched() (use preempt_enable()) in ring
     buffer code"

* tag 'trace-v5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  trace: Fix preempt_enable_no_resched() abuse
  tracing: Fix a memory leak by early error exit in trace_pid_write()
  tracing: Fix buffer_ref pipe ops