- 21 Sep, 2018 20 commits
-
-
Horia Geantă authored
Add support for unkeyed and keyed (hmac) md5, sha algorithms. Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Horia Geantă authored
caam/qi2 driver will support ahash algorithms, thus move ahash descriptors generation in a shared location. Signed-off-by:
-
Horia Geantă authored
Add support to submit the following skcipher algorithms via the DPSECI backend: cbc({aes,des,des3_ede}) ctr(aes), rfc3686(ctr(aes)) xts(aes) Signed-off-by: -
Horia Geantă authored
Add CAAM driver that works using the DPSECI backend, i.e. manages DPSECI DPAA2 objects sitting on the Management Complex (MC) fsl-mc bus. Data transfers (crypto requests) are sent/received to/from CAAM crypto engine via Queue Interface (v2), this being similar to existing caam/qi. OTOH, configuration/setup (obtaining virtual queue IDs, authorization etc.) is done by sending commands to the MC f/w. Note that the CAAM accelerator included in DPAA2 platforms still has Job Rings. However, the driver being added does not handle access via this backend. Kconfig & Makefile are updated such that DPAA2-CAAM (a.k.a. "caam/qi2") driver does not depend on caam/jr or caam/qi backends - which rely on platform bus support (ctrl.c). Support for the following aead and authenc algorithms is also added in this patch: -aead: gcm(aes) rfc4106(gcm(aes)) rfc4543(gcm(aes)) -authenc: authenc(hmac({md5,sha*}),cbc({aes,des,des3_ede})) echainiv(authenc(hmac({md5,sha*}),cbc({aes,des,des3_ede}))) authenc(hmac({md5,sha*}),rfc3686(ctr(aes)) seqiv(authenc(hmac({md5,sha*}),rfc3686(ctr(aes))) Signed-off-by: -
Horia Geantă authored
Add support to translate error codes returned by QI v2, i.e. Queue Interface present on DataPath Acceleration Architecture v2 (DPAA2). Signed-off-by:
-
Horia Geantă authored
Add the low-level API that allows to manage DPSECI DPAA2 objects that sit on the Management Complex (MC) fsl-mc bus. The API is compatible with MC firmware 10.2.0+. Signed-off-by:
-
Horia Geantă authored
Fix the following sparse endianness warnings: drivers/crypto/caam/regs.h:95:1: sparse: incorrect type in return expression (different base types) @@ expected unsigned int @@ got restricted __le32unsigned int @@ drivers/crypto/caam/regs.h:95:1: expected unsigned int drivers/crypto/caam/regs.h:95:1: got restricted __le32 [usertype] <noident> drivers/crypto/caam/regs.h:95:1: sparse: incorrect type in return expression (different base types) @@ expected unsigned int @@ got restricted __be32unsigned int @@ drivers/crypto/caam/regs.h:95:1: expected unsigned int drivers/crypto/caam/regs.h:95:1: got restricted __be32 [usertype] <noident> drivers/crypto/caam/regs.h:92:1: sparse: cast to restricted __le32 drivers/crypto/caam/regs.h:92:1: sparse: cast to restricted __be32 Fixes: 261ea058 ("crypto: caam - handle core endianness != caam endianness") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
Horia Geantă authored
Add support for Congestion State Change Notifications (CSCN), which allow DPIO users to be notified when a congestion group changes its state (due to hitting the entrance / exit threshold). Acked-by:
Li Yang <leoyang.li@nxp.com> Signed-off-by:
-
Horia Geantă authored
Add support for dpaa2_fd_list format, i.e. dpaa2_fl_entry structure and accessors. Frame list entries (FLEs) are similar, but not identical to FDs: + "F" (final) bit - FMT[b'01] is reserved - DD, SC, DROPP bits (covered by "FD compatibility" field in FLE case) - FLC[5:0] not used for stashing Signed-off-by:
-
Horia Geantă authored
This commit adds back functions removed in commit a211c817 ("staging: fsl-mc/dpio: remove couple of unused functions") since dpseci object will make use of them. Acked-by:
-
Horia Geantă authored
Signed-off-by:
Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by:
-
Eric Biggers authored
In commit 9f480fae ("crypto: chacha20 - Fix keystream alignment for chacha20_block()"), I had missed that chacha20_block() can be called directly on the buffer passed to get_random_bytes(), which can have any alignment. So, while my commit didn't break anything, it didn't fully solve the alignment problems. Revert my solution and just update chacha20_block() to use put_unaligned_le32(), so the output buffer need not be aligned. This is simpler, and on many CPUs it's the same speed. But, I kept the 'tmp' buffers in extract_crng_user() and _get_random_bytes() 4-byte aligned, since that alignment is actually needed for _crng_backtrack_protect() too. Reported-by:
Stephan Müller <smueller@chronox.de> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Ondrej Mosnacek authored
Since commit acb9b159 ("crypto: gf128mul - define gf128mul_x_* in gf128mul.h"), the gf128mul_x_*() functions are very fast and therefore caching the computed XTS tweaks has only negligible advantage over computing them twice. In fact, since the current caching implementation limits the size of the calls to the child ecb(...) algorithm to PAGE_SIZE (usually 4096 B), it is often actually slower than the simple recomputing implementation. This patch simplifies the XTS template to recompute the XTS tweaks from scratch in the second pass and thus also removes the need to allocate a dynamic buffer using kmalloc(). As discussed at [1], the use of kmalloc causes deadlocks with dm-crypt. PERFORMANCE RESULTS I measured time to encrypt/decrypt a memory buffer of varying sizes with xts(ecb-aes-aesni) using a tool I wrote ([2]) and the results suggest that after this patch the performance is either better or comparable for both small and large buffers. Note that there is a lot of noise in the measurements, but the overall difference is easy to see. Old code: ALGORITHM KEY (b) DATA (B) TIME ENC (ns) TIME DEC (ns) xts(aes) 256 64 331 328 xts(aes) 384 64 332 333 xts(aes) 512 64 338 348 xts(aes) 256 512 889 920 xts(aes) 384 512 1019 993 xts(aes) 512 512 1032 990 xts(aes) 256 4096 2152 2292 xts(aes) 384 4096 2453 2597 xts(aes) 512 4096 3041 2641 xts(aes) 256 16384 9443 8027 xts(aes) 384 16384 8536 8925 xts(aes) 512 16384 9232 9417 xts(aes) 256 32768 16383 14897 xts(aes) 384 32768 17527 16102 xts(aes) 512 32768 18483 17322 New code: ALGORITHM KEY (b) DATA (B) TIME ENC (ns) TIME DEC (ns) xts(aes) 256 64 328 324 xts(aes) 384 64 324 319 xts(aes) 512 64 320 322 xts(aes) 256 512 476 473 xts(aes) 384 512 509 492 xts(aes) 512 512 531 514 xts(aes) 256 4096 2132 1829 xts(aes) 384 4096 2357 2055 xts(aes) 512 4096 2178 2027 xts(aes) 256 16384 6920 6983 xts(aes) 384 16384 8597 7505 xts(aes) 512 16384 7841 8164 xts(aes) 256 32768 13468 12307 xts(aes) 384 32768 14808 13402 xts(aes) 512 32768 15753 14636 [1] https://lkml.org/lkml/2018/8/23/1315 [2] https://gitlab.com/omos/linux-crypto-benchSigned-off-by:
Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
-
Ard Biesheuvel authored
The Crypto Extension instantiation of the aes-modes.S collection of skciphers uses only 15 NEON registers for the round key array, whereas the pure NEON flavor uses 16 NEON registers for the AES S-box. This means we have a spare register available that we can use to hold the XTS mask vector, removing the need to reload it at every iteration of the inner loop. Since the pure NEON version does not permit this optimization, tweak the macros so we can factor out this functionality. Also, replace the literal load with a short sequence to compose the mask vector. On Cortex-A53, this results in a ~4% speedup. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Ard Biesheuvel authored
Currently, we rely on the generic CTS chaining mode wrapper to instantiate the cts(cbc(aes)) skcipher. Due to the high performance of the ARMv8 Crypto Extensions AES instructions (~1 cycles per byte), any overhead in the chaining mode layers is amplified, and so it pays off considerably to fold the CTS handling into the SIMD routines. On Cortex-A53, this results in a ~50% speedup for smaller input sizes. Signed-off-by:
-
Ard Biesheuvel authored
The reasoning of commit f10dc56c ("crypto: arm64 - revert NEON yield for fast AEAD implementations") applies equally to skciphers: the walk API already guarantees that the input size of each call into the NEON code is bounded to the size of a page, and so there is no need for an additional TIF_NEED_RESCHED flag check inside the inner loop. So revert the skcipher changes to aes-modes.S (but retain the mac ones) This partially reverts commit 0c8f838a. Signed-off-by:
-
Ard Biesheuvel authored
For some reason, the asmlinkage prototypes of the NEON routines take u8[] arguments for the round key arrays, while the actual round keys are arrays of u32, and so passing them into those routines requires u8* casts at each occurrence. Fix that. Signed-off-by:
-
Srikanth Jampala authored
use dma_pool_zalloc() instead of dma_pool_alloc with __GFP_ZERO flag. crypto dma pool renamed to "nitrox-context". Signed-off-by:
Srikanth Jampala <Jampala.Srikanth@cavium.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Herbert Xu authored
Merge crypto-2.6 to resolve caam conflict with skcipher conversion.
-
Horia Geantă authored
In some cases the zero-length hw_desc array at the end of ablkcipher_edesc struct requires for 4B of tail padding. Due to tail padding and the way pointers to S/G table and IV are computed: edesc->sec4_sg = (void *)edesc + sizeof(struct ablkcipher_edesc) + desc_bytes; iv = (u8 *)edesc->hw_desc + desc_bytes + sec4_sg_bytes; first 4 bytes of IV are overwritten by S/G table. Update computation of pointer to S/G table to rely on offset of hw_desc member and not on sizeof() operator. Cc: <stable@vger.kernel.org> # 4.13+ Fixes: 115957bb ("crypto: caam - fix IV DMA mapping and updating") Signed-off-by:
-
- 14 Sep, 2018 5 commits
-
-
Srikanth Jampala authored
Added support to configure SR-IOV using sysfs interface. Supported VF modes are 16, 32, 64 and 128. Grouped the hardware configuration functions to "nitrox_hal.h" file. Changed driver version to "1.1". Signed-off-by:
Gadam Sreerama <sgadam@cavium.com> Signed-off-by:
-
Mikulas Patocka authored
This patch fixes gcmaes_crypt_by_sg so that it won't use memory allocation if the data doesn't cross a page boundary. Authenticated encryption may be used by dm-crypt. If the encryption or decryption fails, it would result in I/O error and filesystem corruption. The function gcmaes_crypt_by_sg is using GFP_ATOMIC allocation that can fail anytime. This patch fixes the logic so that it won't attempt the failing allocation if the data doesn't cross a page boundary. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
kbuild test robot authored
Fixes: b7637754 ("crc-t10dif: Pick better transform if one becomes available") Signed-off-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Kees Cook authored
In the quest to remove all stack VLA usage from the kernel[1], this uses the new HASH_MAX_DIGESTSIZE from the crypto layer to allocate the upper bounds on stack usage. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.comSigned-off-by:
Kees Cook <keescook@chromium.org> Acked-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Ondrej Mosnacek authored
It turns out OSXSAVE needs to be checked only for AVX, not for SSE. Without this patch the affected modules refuse to load on CPUs with SSE2 but without AVX support. Fixes: 877ccce7 ("crypto: x86/aegis,morus - Fix and simplify CPUID checks") Cc: <stable@vger.kernel.org> # 4.18 Reported-by:
Zdenek Kaspar <zkaspar82@gmail.com> Signed-off-by:
-
- 13 Sep, 2018 1 commit
-
-
Brijesh Singh authored
Currently, the CCP driver assumes that the SEV command issued to the PSP will always return (i.e. it will never hang). But recently, firmware bugs have shown that a command can hang. Since of the SEV commands are used in probe routines, this can cause boot hangs and/or loss of virtualization capabilities. To protect against firmware bugs, add a timeout in the SEV command execution flow. If a command does not complete within the specified timeout then return -ETIMEOUT and stop the driver from executing any further commands since the state of the SEV firmware is unknown. Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gary Hook <Gary.Hook@amd.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: linux-kernel@vger.kernel.org Signed-off-by:
Brijesh Singh <brijesh.singh@amd.com> Signed-off-by:
-
- 04 Sep, 2018 14 commits
-
-
Eric Biggers authored
Optimize ChaCha20 NEON performance by: - Implementing the 8-bit rotations using the 'vtbl.8' instruction. - Streamlining the part that adds the original state and XORs the data. - Making some other small tweaks. On ARM Cortex-A7, these optimizations improve ChaCha20 performance from about 12.08 cycles per byte to about 11.37 -- a 5.9% improvement. There is a tradeoff involved with the 'vtbl.8' rotation method since there is at least one CPU (Cortex-A53) where it's not fastest. But it seems to be a better default; see the added comment. Overall, this patch reduces Cortex-A53 performance by less than 0.5%. Signed-off-by:
-
Martin K. Petersen authored
Add a way to print the currently active CRC algorithm in: /sys/module/crc_t10dif/parameters/transform Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Martin K. Petersen authored
T10 CRC library is linked into the kernel thanks to block and SCSI. The crypto accelerators are typically loaded later as modules and are therefore not available when the T10 CRC library is initialized. Use the crypto notifier facility to trigger a switch to a better algorithm if one becomes available after the initial hash has been registered. Use RCU to protect the original transform while the new one is being set up. Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org Suggested-by:
-
Martin K. Petersen authored
Introduce a facility that can be used to receive a notification callback when a new algorithm becomes available. This can be used by existing crypto registrations to trigger a switch from a software-only algorithm to a hardware-accelerated version. A new CRYPTO_MSG_ALG_LOADED state is introduced to the existing crypto notification chain, and the register/unregister functions are exported so they can be called by subsystems outside of crypto. Signed-off-by:
-
Ard Biesheuvel authored
The arm64 implementation of the CRC-T10DIF algorithm uses the 64x64 bit polynomial multiplication instructions, which are optional in the architecture, and if these instructions are not available, we fall back to the C routine which is slow and inefficient. So let's reuse the 64x64 bit PMULL alternative from the GHASH driver that uses a sequence of ~40 instructions involving 8x8 bit PMULL and some shifting and masking. This is a lot slower than the original, but it is still twice as fast as the current [unoptimized] C code on Cortex-A53, and it is time invariant and much easier on the D-cache. Signed-off-by:
-
Ard Biesheuvel authored
Reorganize the CRC-T10DIF asm routine so we can easily instantiate an alternative version based on 8x8 polynomial multiplication in a subsequent patch. Signed-off-by:
-
Ard Biesheuvel authored
Now that the scalar fallbacks have been moved out of this driver into the core crc32()/crc32c() routines, we are left with a CRC32 crypto API driver for arm64 that is based only on 64x64 polynomial multiplication, which is an optional instruction in the ARMv8 architecture, and is less and less likely to be available on cores that do not also implement the CRC32 instructions, given that those are mandatory in the architecture as of ARMv8.1. Since the scalar instructions do not require the special handling that SIMD instructions do, and since they turn out to be considerably faster on some cores (Cortex-A53) as well, there is really no point in keeping this code around so let's just remove it. Signed-off-by:
-
Ard Biesheuvel authored
Replace the literal load of the addend vector with a sequence that performs each add individually. This sequence is only 2 instructions longer than the original, and 2% faster on Cortex-A53. This is an improvement by itself, but also works around a Clang issue, whose integrated assembler does not implement the GNU ARM asm syntax completely, and does not support the =literal notation for FP registers (more info at https://bugs.llvm.org/show_bug.cgi?id=38642) Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Ard Biesheuvel authored
Speed up the GHASH algorithm based on 64-bit polynomial multiplication by adding support for 4-way aggregation. This improves throughput by ~85% on Cortex-A53, from 1.7 cycles per byte to 0.9 cycles per byte. When combined with AES into GCM, throughput improves by ~25%, from 3.8 cycles per byte to 3.0 cycles per byte. Signed-off-by:
-
Ard Biesheuvel authored
As it turns out, the AVX2 multibuffer SHA routines are currently broken [0], in a way that would have likely been noticed if this code were in wide use. Since the code is too complicated to be maintained by anyone except the original authors, and since the performance benefits for real-world use cases are debatable to begin with, it is better to drop it entirely for the moment. [0] https://marc.info/?l=linux-crypto-vger&m=153476243825350&w=2Suggested-by:
-
Tudor Ambarus authored
Adopt the SPDX license identifiers to ease license compliance management. Signed-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by:
-
Brijesh Singh authored
Currently, the CCP driver assumes that the SEV command issued to the PSP will always return (i.e. it will never hang). But recently, firmware bugs have shown that a command can hang. Since of the SEV commands are used in probe routines, this can cause boot hangs and/or loss of virtualization capabilities. To protect against firmware bugs, add a timeout in the SEV command execution flow. If a command does not complete within the specified timeout then return -ETIMEOUT and stop the driver from executing any further commands since the state of the SEV firmware is unknown. Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Gary Hook <Gary.Hook@amd.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Kees Cook authored
In the quest to remove all stack VLA usage from the kernel[1], this uses the newly defined max alignment to perform unaligned hashing to avoid VLAs, and drops the helper function while adding sanity checks on the resulting buffer sizes. Additionally, the __aligned_largest macro is removed since this helper was the only user. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.comSigned-off-by:
-
Kees Cook authored
In the quest to remove all stack VLA usage from the kernel[1], this uses the new upper bound for the stack buffer. Also adds a sanity check. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.comSigned-off-by:
-
