- 24 Apr, 2017 21 commits
-
-
James Smart authored
There are two versions of a structure for queue creation and setup that the driver shares with FW. The driver was only treating as version 0. Verify WQ_CREATE with 128B WQEs in V0 and V1. Code review of another bug showed the driver passing 128B WQEs and 8 pages in WQ CREATE and V0. Code inspection/instrumentation showed that the driver uses V0 in WQ_CREATE and if the caller passes queue->entry_size 128B, the driver sets the hdr_version to V1 so all is good. When I tested the V1 WQ_CREATE, the mailbox failed causing the driver to unload. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
-
James Smart authored
There are couple of different load/unload issues fixed with this patch. One of the issues was reported by Junichi Nomura, a patch was submitted by Johannes Thumsrhirn which did fix one of the problems but the fix in this patch separates the pring free from the queue free and does not set the parameter passed in to NULL. issues: (1) driver could not be unloaded and reloaded without some Oops or Panic occurring. (2) The driver was panicking because of a corruption in the Memory Manager when the iocb list was getting allocated. Root cause for the memory corruption was a double free of the Work Queue ring pointer memory - Freed once in the lpfc_sli4_queue_free when the CQ was destroyed and again in lpfc_sli4_queue_free when the WQ was destroyed. The pring free and the queue free were separated, the pring free was moved to the wq destroy routine because it a better fit logically to delete the ring with the wq. The checkpatch flagged several alignmenet issues that were also corrected with this patch. The mboxq was never initialed correctly before it was used by the driver this patch corrects that issue. Reported-by: Junichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Tested-by: Junichi Nomura <j-nomura@ce.jp.nec.com>
-
James Smart authored
PRLI ACC from target is FCP oriented. Word 0 was wrong. This was noticed by another nvmet-fc vendor that was testing the lpfc nvme-fc initiator with their target. Verified results with analyzer. PRLI BC B5 56 56 22 61 04 00 00 61 00 00 01 29 00 00 20 00 00 00 00 10 FF FF 00 00 00 00 20 14 00 18 28 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 00 00 9C D8 DA C9 BC 95 75 75 ACC BC B5 56 56 23 61 00 00 00 61 04 00 01 98 00 00 30 00 00 00 00 10 00 18 00 00 00 00 02 14 00 18 28 00 01 00 00 00 00 00 00 00 00 00 00 00 00 18 00 00 00 00 B0 6B 07 57 BC B5 75 75 Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
-
James Smart authored
An extra blank line was being added the the rqpair printing. Remove the extra line feed. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
-
James Smart authored
The check for NULL ptr is not necessary, kfree will check it. Removing NULL ptr check. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
-
James Smart authored
These defines for the posting of buffers for nvmet target were not used. Removing the unused defines. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
-
James Smart authored
Comment should have said Repost. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
-
James Smart authored
The xri resources are split into pools for NVME and FCP IO when NVME is enabled. There was not message in the log that identified this allocation. Added debug message to log XRI split. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
-
James Smart authored
In the lpfc_nvme_io_cmd_wqe_cmpl routine the driver was printing two pointers and the DID for the rport whenever an IO completed on a now that had transitioned to a non active state. There is no need to print the node pointer address for a node that is not active the DID should be enough to debug. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
-
James Smart authored
In this case, the NVME initiator is sending an LS REQ command on an NDLP that is not MAPPED. The FW rejects it. The lpfc_nvme_ls_req routine checks for a NULL ndlp pointer but does not check the NDLP state. This allows the routine to send an LS IO when the ndlp is disconnected. Check the ndlp for NULL, actual node, Target and MAPPED or Initiator and UNMAPPED. This avoids Fabric nodes getting the Create Association or Create Connection commands. Initiators are free to Reject either Create. Also some of the messages numbers in lpfc_nvme_ls_req were changed because they were already used in other log messages. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
-
James Smart authored
During some link event testing it was observed that the wait_for_completion_timeout in the lpfc_nvme_unregister_port was timing out all the time. The initiator is claiming the nvme_fc_unregister_remoteport upcall is not completing the unregister in the time allotted. [ 2186.151317] lpfc 0000:07:00.0: 0:(0):6169 Unreg nvme wait failed 0 The wait_for_completion_timeout returns 0 when the wait has been outstanding for the jiffies passed by the caller. In this error message, the nvme initiator passed value 5 - meaning 5 jiffies - and this is just wrong. Calculate 5 seconds in Jiffies and pass that value from the current jiffies. Also the log message for the unregister timeout was reduced because timeout failure is the same as timeout. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
-
James Smart authored
Standardize default SGL segment count for nvme target and initiator The driver needs to make them the same for clarity. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
-
Christoph Hellwig authored
Found by sparse. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
-
Christoph Hellwig authored
Found by sparse. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
-
Christoph Hellwig authored
That's what it's used as. Found by sparse. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
-
Christoph Hellwig authored
The passed in desc_len is a big endian value, so mark it as such. Found by sparse. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
-
Christoph Hellwig authored
Found by sparse. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
-
Christoph Hellwig authored
Found by sparse. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
-
James Smart authored
This patch actually does quite a few things. When looking to add controller reset support, the organization modeled after rdma was very fragmented. rdma duplicates the reset and teardown paths and does different things to the block layer on the two paths. The code to build up the controller is also duplicated between the initial creation and the reset/error recovery paths. So I decided to make this sane. I reorganized the controller creation and teardown so that there is a connect path and a disconnect path. Initial creation obviously uses the connect path. Controller teardown will use the disconnect path, followed last access code. Controller reset will use the disconnect path to stop operation, and then the connect path to re-establish the controller. Along the way, several things were fixed - aens were not properly set up. They are allocated differently from the per-request structure on the blk queues. - aens were oddly torn down. the prior patch corrected to abort, but we still need to dma unmap and free relative elements. - missed a few ref counting points: in aen completion and on i/o's that fail - controller initial create failure paths were still confused vs teardown before converting to ref counting vs after we convert to refcounting. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
James Smart authored
Add abort support for aens. Commonized the op abort to apply to aen or real ios (caused some reorg/routine movement). Abort path sets termination flag in prep for next patch that will be watching i/o abort completion before proceeding with controller teardown. Now that we're aborting aens, the "exit" code that simply cleared out their context no longer applies. Also clarified how we detect an AEN vs a normal io - by a flag, not by whether a rq exists or the a rqno is out of range. Note: saw some interesting cases where if the queues are stopped and we're waiting for the aborts, the core layer can call the complete_rq callback for the io. So the io completion synchronizes link side completion with possible blk layer completion under error. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
James Smart authored
The code validates the command_id in the response to the original sqe command. But prior code was using the rq->rqno as the sqe command id. The core layer overwrites what the transport set there originally. Use the actual sqe content. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
- 23 Apr, 2017 6 commits
-
-
Javier González authored
When block erases fail, these blocks are marked bad. The number of valid blocks in the line was not updated, which could cause an infinite loop on the erase path. Fix this atomic counter and, in order to avoid taking an irq lock on the interrupt context, make the erase counters atomic too. Also, in the case that a significant number of blocks become bad in a line, the result is the double shared metadata buffer (emeta) to stop the pipeline until all metadata is flushed to the media. Increase the number of metadata lines from 2 to 4 to avoid this case. Fixes: a4bd217b "lightnvm: physical block device (pblk) target" Signed-off-by: Javier González <javier@cnexlabs.com> Reviewed-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Javier González authored
When a line allocation fails, for example, due to having too many bad blocks, free its metadata correctly. Fixes: a4bd217b "lightnvm: physical block device (pblk) target" Signed-off-by: Javier González <javier@cnexlabs.com> Reviewed-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Javier González authored
When write recovery fails, Free memory for the recovery structure. Fixes: a4bd217b "lightnvm: physical block device (pblk) target" Signed-off-by: Javier González <javier@cnexlabs.com> Reviewed-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Javier González authored
Fix bad error check Fixes: a4bd217b "lightnvm: physical block device (pblk) target" Signed-off-by: Javier González <javier@cnexlabs.com> Reviewed-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Javier González authored
When a pblk line fails (or is recovered), make sure to take the line management lock. Fixes: a4bd217b "lightnvm: physical block device (pblk) target" Signed-off-by: Javier González <javier@cnexlabs.com> Reviewed-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Mike Snitzer authored
When registering an integrity profile: if the template's interval_exp is not 0 use it, otherwise use the ilog2() of logical block size of the provided gendisk. This fixes a long-standing DM linear target bug where it cannot pass integrity data to the underlying device if its logical block size conflicts with the underlying device's logical block size. Cc: stable@vger.kernel.org Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
- 21 Apr, 2017 13 commits
-
-
Dan Carpenter authored
Reading from ADDR_EMPTY is out of bounds. The current code generates a static checker warning because we check for out of bounds "lba" before we check for ADDR_EMPTY, so the second check is always false. It looks like we intended ADDR_EMPTY to be a no-op without printing a warning. Fixes: a4bd217b ("lightnvm: physical block device (pblk) target") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Dan Carpenter authored
This is a static checker fix, and perhaps not a real bug. The static checker thinks that nr_secs could be negative. It would result in zeroing more memory than intended. Anyway, even if it's not a bug, changing this variable to unsigned makes the code easier to audit. Fixes: a4bd217b ("lightnvm: physical block device (pblk) target") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Ilya Dryomov authored
Commit 25520d55 ("block: Inline blk_integrity in struct gendisk") introduced blk_integrity_revalidate(), which seems to assume ownership of the stable pages flag and unilaterally clears it if no blk_integrity profile is registered: if (bi->profile) disk->queue->backing_dev_info->capabilities |= BDI_CAP_STABLE_WRITES; else disk->queue->backing_dev_info->capabilities &= ~BDI_CAP_STABLE_WRITES; It's called from revalidate_disk() and rescan_partitions(), making it impossible to enable stable pages for drivers that support partitions and don't use blk_integrity: while the call in revalidate_disk() can be trivially worked around (see zram, which doesn't support partitions and hence gets away with zram_revalidate_disk()), rescan_partitions() can be triggered from userspace at any time. This breaks rbd, where the ceph messenger is responsible for generating/verifying CRCs. Since blk_integrity_{un,}register() "must" be used for (un)registering the integrity profile with the block layer, move BDI_CAP_STABLE_WRITES setting there. This way drivers that call blk_integrity_register() and use integrity infrastructure won't interfere with drivers that don't but still want stable pages. Fixes: 25520d55 ("block: Inline blk_integrity in struct gendisk") Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 4.4+, needs backporting Tested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Rakesh Pandit authored
From userspace calling ioctl(NVM_DEV_CREATE) was returning ENOMEM for invalid arguments even though pblk (pblk_init) was returning correctly -EINVAL to nvm_create_tgt inside core. This patch propagates the correct return value to userspace. Because pblk was introduced recently this only needs to go in 4.12. Fixes: a4bd217b ("lightnvm: physical block device (pblk) target") Signed-off-by: Rakesh Pandit <rakesh@tuxera.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Bart Van Assche authored
Avoid that the following kernel bug gets triggered: BUG: sleeping function called from invalid context at ./include/linux/buffer_head.h:349 in_atomic(): 1, irqs_disabled(): 0, pid: 8019, name: find CPU: 10 PID: 8019 Comm: find Tainted: G W I 4.11.0-rc4-dbg+ #2 Call Trace: dump_stack+0x68/0x93 ___might_sleep+0x16e/0x230 __might_sleep+0x4a/0x80 __ext4_get_inode_loc+0x1e0/0x4e0 ext4_iget+0x70/0xbc0 ext4_iget_normal+0x2f/0x40 ext4_lookup+0xb6/0x1f0 lookup_slow+0x104/0x1e0 walk_component+0x19a/0x330 path_lookupat+0x4b/0x100 filename_lookup+0x9a/0x110 user_path_at_empty+0x36/0x40 vfs_statx+0x67/0xc0 SYSC_newfstatat+0x20/0x40 SyS_newfstatat+0xe/0x10 entry_SYSCALL_64_fastpath+0x18/0xad This happens since the big if/else in blk_mq_make_request() doesn't have final else section that also drops the ctx. Add that. Fixes: b00c53e8 ("blk-mq: fix schedule-while-atomic with scheduler attached") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Omar Sandoval <osandov@fb.com> Added a bit more to the commit log. Signed-off-by: Jens Axboe <axboe@fb.com>
-
git://git.infradead.org/nvmeJens Axboe authored
Christoph writes: This is the current NVMe pile: virtualization extensions, lots of FC updates and various misc bits. There are a few more FC bits that didn't make the cut, but we'd like to get this request out before the merge window for sure.
-
Jens Axboe authored
We need to get the command payload from the request before we attempt to dereference it. Fixes: 4dda4735 ("mtip32xx: add a status field to struct mtip_cmd") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Junxiong Guan authored
Currently most IOs which return the nvme error codes are retried on the other path if those IOs returns EIO from NVMe driver. This patch let Multipath distinguish nvme media error codes and some generic or cmd-specific nvme error codes so that multipath will not retry those kinds of IO, to save bandwidth. Signed-off-by: Junxiong Guan <guanjunxiong@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Keith Busch authored
If an IO timeout occurs, it's helpful to know if the controller did not post a completion or the driver missed an interrupt. While we never expect the latter, this patch will make it possible to tell the difference so we don't have to guess. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
-
James Smart authored
The FC-NVME spec revised syntax to avoid comma separators. Sync with the change in the parser for traddr on port attachments. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
-
James Smart authored
remoteport teardown never aborted the LS opertions. Add support. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
-
James Smart authored
Link LS's on the remoteport rather than the controller. LS's are between nport's. Makes more sense, especially on async teardown where the controller is torn down regardless of the LS (LS is more of a notifier to the target of the teardown), to have them on the remoteport. While revising ls send/done routines, issues were seen relative to refcounting and cleanup, especially in async path. Reworked these code paths. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
-
James Smart authored
Add missing reference in add_port Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
-