- 18 Jul, 2013 7 commits
-
-
Rodrigo Vivi authored
v2: Prefer seq_puts to seq_printf by Paulo Zanoni. v3: small changes like avoiding calling dp_to_dig_port twice as noticed by Paulo Zanoni. v4: Avoiding reading non-existent registers - noticed by Paulo on first psr debugfs patch. v5: Accepting more suggestions from Paulo: * check sw interlace flag instead of i915_read * introduce PSR_S3D_ENABLED to avoid forgeting it whenever added. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
Shobhit Kumar <shobhit.kumar@intel.com> [danvet: Fix up debugfs output (spotted by Paulo) and rip out the power well check since we really can't do that in a race-free manner, so it's bogus.] Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Rodrigo Vivi authored
Adding support for PSR Status, PSR entry counter and performance counters. Heavily based on initial work from Shobhit. v2: Fix PSR Status Link bits by Paulo Zanoni. v3: Prefer seq_puts to seq_printf by Paulo Zanoni. v4: Fix identation by Paulo Zanoni. v5: Return earlier if it isn't Haswell in order to avoid reading non-existing registers - by Paulo Zanoni. CC: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: -
Rodrigo Vivi authored
Adding Enable and Disable PSR functionalities. This includes setting the PSR configuration over AUX, sending SDP VSC DIP over the eDP PIPE config, enabling PSR in the sink via DPCD register and finally enabling PSR on the host. This patch is based on initial PSR code by Sateesh Kavuri and Kumar Shobhit but in a different implementation. v2: * moved functions around and changed its names. * removed VSC DIP unset from disable. * remove FBC wa. * don't mask LSPS anymore. * incorporate new crtc usage after a rebase. v3: Make a clear separation between Sink (Panel) and Source (HW) enabling. v4: Fix identation and other style issues raised by checkpatch (by Paulo). v5: Changes according to Paulo's review: static on write_vsc; avoid using dp_to_dev when already calling dp_to_dig_port; remove unecessary TP default time setting; remove unecessary interrupts disabling; remove unecessary wait_for_vblank when disabling psr; v6: remove unecessary wait_for_vblank when writing vsc; v7: adding setup once function to avoid unnecessarily write to vsc and set debug_ctl every time we enable or disable psr. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Credits-by:Sateesh Kavuri <sateesh.kavuri@intel.com> Credits-by:
-
Rodrigo Vivi authored
Prep patch for reuse aux_clock_divider with EDP_PSR_AUX_CTL setup. Reviewed-by:
-
Shobhit Kumar authored
v2: reuse of just created is_edp_psr and put it at right place. v3: move is_edp_psr above intel_edp_disable v4: remove parentheses. Noticed by Paulo. Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Shobhit Kumar authored
SDP header and SDP VSC header as per eDP 1.3 spec, section 3.5, chapter "PSR Secondary Data Package Support". v2: Modified and corrected the structures to be more in line for kernel coding guidelines and rebased the code on Paulo's DP patchset v3: removing unecessary identation at DP_RECEIVER_CAP_SIZE v4: moving them to include/drm/drm_dp_helper.h and also already icluding EDP_PSR_RECEIVER_CAP_SIZE to add everything needed for PSR at once at drm_dp_helper.h v5: Fix SDP VSC header and identation by (Paulo Zanoni) and remove i915 from title (Daniel Vetter) v6: Fix spec version and move comments from code to commit message since numbers might change in the future (by Paulo Zanoni). CC: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:Dave Airlie <airlied@gmail.com> Signed-off-by:
-
Ben Widawsky authored
Formerly: "drm/i915: Create VMAs (part 1)" In a previous patch, the notion of a VM was introduced. A VMA describes an area of part of the VM address space. A VMA is similar to the concept in the linux mm. However, instead of representing regular memory, a VMA is backed by a GEM BO. There may be many VMAs for a given object, one for each VM the object is to be used in. This may occur through flink, dma-buf, or a number of other transient states. Currently the code depends on only 1 VMA per object, for the global GTT (and aliasing PPGTT). The following patches will address this and make the rest of the infrastructure more suited v2: s/i915_obj/i915_gem_obj (Chris) v3: Only move an object to the now global unbound list if there are no more VMAs for the object which are bound into a VM (ie. the list is empty). v4: killed obj->gtt_space some reworks due to rebase v5: Free vma on error path (Imre) v6: Another missed vma free in i915_gem_object_bind_to_gtt error path (Imre) Fixed vma freeing in stolen preallocation (Imre) Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> Reviewed-by:
Imre Deak <imre.deak@intel.com> [danvet: Squash in fixup from Ben to not deref a non-existing vma in set_cache_level, reported by Chris.] Signed-off-by:
-
- 17 Jul, 2013 5 commits
-
-
Ben Widawsky authored
The odds of this happening are *extremely* unlikely. Reported-by:
-
Ben Widawsky authored
Shamelessly manipulated out of Daniel :-) "When moving the lists around explain that the active/inactive stuff is used by eviction when we run out of address space, so needs to be per-vma and per-address space. Bound/unbound otoh is used by the shrinker which only cares about the amount of memory used and not one bit about in which address space this memory is all used in. Of course to actual kick out an object we need to unbind it from every address space, but for that we have the per-object list of vmas." v2: Leave the bound list as a global one. (Chris, indirectly) v3: Rebased with no i915_gtt_vm. In most places I added a new *vm local, since it will eventually be replaces by a vm argument. Put comment back inline, since it no longer makes sense to do otherwise. v4: Rebased on hangcheck/error state movement Signed-off-by:
-
Ben Widawsky authored
After we plumb our code to support multiple address spaces (VMs), there are a few situations where we want to be able to traverse the list of all address spaces in the system. Cases like eviction, or error state collection are obvious example. v2: Delete the global link instead of the list head. While this in and of itself shouldn't be really be a problem, doing this allows us to WARN on an non-empty list, which is a problem. (Daniel) Signed-off-by:
-
Ben Widawsky authored
Every address space should support object allocation. It therefore makes sense to have the allocator be part of the "superclass" which GGTT and PPGTT will derive. Since our maximum address space size is only 2GB we're not yet able to avoid doing allocation/eviction; but we'd hope one day this becomes almost irrelvant. v2: Rebased Signed-off-by:
-
Ben Widawsky authored
The GTT and PPGTT can be thought of more generally as GPU address spaces. Many of their actions (insert entries), state (LRU lists), and many of their characteristics (size) can be shared. Do that. The change itself doesn't actually impact most of the VMA/VM rework coming up, it just fits in with the grand scheme of abstracting the GPU VM operations. GGTT will usually be a special case where we either know an object must be in the GGTT (dislay engine, workarounds, etc.). The scratch page is left as part of the VM (even though it's currently shared with the ppgtt code) because in the future when we have Full PPGTT, I intend to create a separate scratch page for each. v2: Drop usage of i915_gtt_vm (Daniel) Make cleanup also part of the parent class (Ben) Modified commit msg Rebased v3: Properly share scratch page (Imre) Finish commit message (Daniel, Imre) Signed-off-by:
-
- 16 Jul, 2013 17 commits
-
-
Mika Kuoppala authored
To run hangcheck in near future. Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
-
Chris Wilson authored
The intent of the check is made more clear if we use the proper name for 0 here. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Chris Wilson authored
The default context is always supported (as it contains the global hangcheck stats) and the contexts for hangcheck are not limited to any ring. References: https://bugs.freedesktop.org/show_bug.cgi?id=65845Signed-off-by:
-
Damien Lespiau authored
intel_enable_rc6() is used to check if we can compute the RC6 residency in the sysfs code. Disable this for platforms older than Ironlake. Signed-off-by:
Damien Lespiau <damien.lespiau@intel.com> Reviewed-by:
-
Damien Lespiau authored
Signed-off-by:
-
Damien Lespiau authored
Signed-off-by:
-
Damien Lespiau authored
v2: Put the comment a bit closer to the actual write (Paulo Zanoni) Reviewed-by:
-
Damien Lespiau authored
We also wait for that blank on other platforms but the w/a doesn't apply there. Not an issue at all. Signed-off-by:
-
Daniel Vetter authored
At the moment we have the following interrupt enabling sequence: 1. irq preinstall hook 2. enabling the interrupt handler and calling irq postinstall hook 3. enable rps interrupts from the async work And the folliwing disable sequence: 1. disabling the interrupt handler and calling the uninstall hook 2. disabling the rps interrupt Since the postinstall hook now always sets up PMIIR, PMIER and PMIMR to known-good states there no way for an interrupt to sneak in in the enable sequence, so we can reinstate the WARN lost in commit eda63ffb Author: Ben Widawsky <ben@bwidawsk.net> Date: Tue May 28 19:22:26 2013 -0700 drm/i915: Add PM regs to pre/post install Note that there's some room for future cleanups since most of the interrupt register clearing in the disable function is rather redundant. But that's better done in follow-up patches, if at all. Cc: Ben Widawsky <ben@bwidawsk.net> Reviewed-by:
-
Daniel Vetter authored
The VECS enabling required some changes to how rps interrupts are enabled/disabled since VECS interrupts are handling with the PM interrupt registers. But now that the pre/postinstall sequences is identical for all platforms with rps support (snb, ivb, hsw, vlv) we can also use the exact same sequence to actually enable the rps interrupts. Strictly speaking using spinlocks is overkill on snb/ivb & vlv since they have no VECS ring, but imo that's more than made up by the common code. Hence this just unifies the vlv code with the snb-hsw code which matched exactly before the VECS enabling. See commit eda63ffb Author: Ben Widawsky <ben@bwidawsk.net> Date: Tue May 28 19:22:26 2013 -0700 drm/i915: Add PM regs to pre/post install and commit 4848405c Author: Ben Widawsky <ben@bwidawsk.net> Date: Tue May 28 19:22:27 2013 -0700 drm/i915: make PM interrupt writes non-destructive for why the gen6 code (shared between snb, ivb and hsw) needed to be changed originally. v3: Improve the commit message to more clearly spell out why we want to unify the code and what exactly changes. Cc: Paulo Zanoni <przanoni@gmail.com> Cc: Ben Widawsky <ben@bwidawsk.net> Reviewed-by:
-
Daniel Vetter authored
Again extract a common helper. For the postinstall hook things are a bit more complicated since we have more cases on ilk-hsw/vlv here. But since vlv was clearly broken by failing to initialize dev_priv->gt_irq_mask correctly the shared code is clearly justified. Also kill the PMIER setting in the async rps enable work. I should have been save, but also clearly looked rather fragile. PMIER setup is now all down in the irq pre/postinstall hooks. With this we now have the usual interrupt register sequence for GT/PM irq registers: - IER is setup once with all the interrupts we ever need in the postinstall hook and never touched again. Exceptions are SDEIER, which is touched in the preinstall hook (when the irq handler isn't enabled) and then only from the irq handler. And DEIER/VLV_IER with is used in the irq handler but also written to once in the postinstall hook. But since that write is essentially what enables the interrupt and we should always have MSI interrupts we should be save. In case we ever have non-MSI interrupts we'd be screwed. - IIR is cleared in the postinstall hook before we enable/unmask the respective interrupt sources. Hence we can't steal an interrupt event an accidentally trigger the spurious interrupt logic in the core kernel. Note that after some discussion with Ben Widawsky we think that we actually should clear the IIR registers in the preinstall hook. But doing that is a much larger patch series. - IMR regs are (usually) all masked off. Those are the only regs changed at runtime, which is all protected by dev_priv->irq_lock. This unification also kills the cargo-culted read-modify-write PM register setup for VECS. Interrupt setup is done without userspace being able to interfere, so we better know what values we want to put into those registers. RMW cycles otoh are really good at papering over races, until stuff magically blows up and no one has a clue why. v2: Touch the gen6+ PM interrupt registers only on gen6+. v3: Improve the commit message to more clearly spell out why we want to unify the code and what exactly changes. Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Paulo Zanoni <przanoni@gmail.com> Reviewed-by:
-
Daniel Vetter authored
Since the addition of VECS we have a slightly different enable sequence for PM interrupts on ivb/hsw vs snb and vlv. Usually that will end up in hard to track down surprises. Hence unifiy things and since we have copies of this code in 3 places now, extract it into its own little helper. Note that this changes the irq preinstall sequence a bit for snb and vlv: We now also clear the PM registers in the preinstall hook, in addition to the PM register clearing/setup already done when actually enabling rps. So this doesn't fix a bug but simply unifies the code across all platforms. After the postinstall hook is similarly unified we can rip out the then redundant PM interrupt setup from the rps code. v3: Rebase on top of the retained double-GTIIR clearing. Also resurrect the masking/disabling of the gen6+ PM interrupts as spotted by Ben Widaswky. v4: Move the DE interrupt reset code out of gen5_gt_irq_preinstall back to ironlake_irq_preinstall where it really belongs. Spotted by Paulo. v3: Improve the commit message to more clearly spell out why we want to unify the code and what exactly changes. Cc: Paulo Zanoni <przanoni@gmail.com> Reviewed-by:
-
Ben Widawsky authored
To make users life a little easier figuring out what they have on their system. Ideally, I'd really like to report LLC size, but it turned out to be a bit of a pain. Maybe I'll revisit it in the future. Signed-off-by:
-
Ben Widawsky authored
DRI clients really should be using MOCS to get fine grained streaming cache controls. With that note, I *hope* that this patch doesn't improve performance overwhelmingly, because if it does - it means there is a problem elsewhere. In any case, the kernel, and old userspace should get some benefit from this, so let's do it. eLLC is always a good default, and really not using it is the special case for MOCS. References: http://www.intel.com/newsroom/kits/restricted/ha$well!/pdfs/4th_Gen_Intel_Core_PressBriefing_5-29.pdf (page 57) Signed-off-by:
-
Ben Widawsky authored
The eLLC cannot be determined by PCIID because as far as we know, even machines supporting eLLC may not have it enabled, or fused off or whatever. It's possible this isn't actually true, and at that point we can switch to a DEV_INFO flag instead. I've defined everything where the docs are clear, and left the rest as magic. But we need it before we set the pte_encode function pointers, which happens really early, in gtt_init. The problem with just doing the normal sequence earlier is we don't have the ability to use forcewake until after the pte functions have been set up. Since all solutions are somewhat ugly (barring rewriting all the init ordering), I've opted to do the detection really early, and the enabling later - since the register to detect doesn't require forcewake. Signed-off-by:
-
Ben Widawsky authored
The EDRAM present register isn't really defined in the docs. It just says check to see if it's set to 1. So I haven't defined the 1 value not knowing what it actually means. Signed-off-by:
-
Ben Widawsky authored
The cacheability controls have changed, and the bits have been rearranged in general. Note that age 0 is the oldest (most likely to get evicted) and age 3 is the youngest (most likely to stick around for a bit). We've picked 0 for no reason, but atm it shouldn't matter anyway (since we don't yet try to differentiate between different objects). v2: Remove comments for snb/ivb cache leves, that's a separate change. v3: Resolve conflicts due to patch series reordering. v4: Rebased on top of Kenneth Graunke's ->pte_encode refactoring. v5: Removed eLLC bits for separate patch. In the internal repository this was: Signed-off-by:
Kenneth Graunke <kenneth@whitecape.org> Reviewed-by:
-
- 12 Jul, 2013 5 commits
-
-
Daniel Vetter authored
Toghether with the hw state readout this should catch cases where we don't properly updated the pll state (either in sw or hw). At least for the shared dpll code the equivalent tricke helped a lot in catching bugs. Also rename the function prefix, it's not a generic piece of infrastructure. Reviewed-by:
-
Daniel Vetter authored
Bspec for the "DPLL HDMI multiplier" field says: "Restriction : The DPLL must be enabled and stable before setting these bits. These bits must be programmed after DPLL_SEL is programmed." There is apparently no restriction on programming the DPLL_SEL register wrt the DPLL. So let's just move that up before we enable the pch dpll. Reviewed-by:
-
Daniel Vetter authored
No need to call the ->pre_pll_enable hook twice if we don't enable the dpll too early. This should make Jani a bit less grumpy. v2: Rebase on top of the newly-colored BUG_ONs. v3: Reinstate the lost write of the DPLL_MD register, spotted by Imre. Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
Mika Kuoppala authored
Move error state generation and stringification to it's own compilation unit. Sysfs also uses this so it can't be under CONFIG_DEBUG_FS This fixes a regression introduced in commit ef86ddce Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Thu Jun 6 17:38:54 2013 +0300 drm/i915: add error_state sysfs entry Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66814Signed-off-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Damien Lespiau authored
If intel_sdvo_get_value() fails here, val is unitialized and the cross check will compare the pipe config multiplier with a bogus value. Instead, only set encoder_pixel_multiplier when the sdvo command has been successful. The cross check will compare the pipe config value with 0 otherwise. v2: Do the cross check with the initial value of encoder_pixel_multiplier (0) if the sdvo command fails (and thus keep the warning) (Daniel Vetter) Signed-off-by:
-
- 11 Jul, 2013 6 commits
-
-
Damien Lespiau authored
Came accross two open coding of for_each_pipe(), might as well use the macro. Signed-off-by:
-
Daniel Vetter authored
The code to handle it is broken - there's simply no code to clear CS parser errors on gen5+. And behold, for all the other rings we also don't enable it! Leave the handling code itself in place just to be consistent with the existing mess though. And in case someone feels like fixing it all up. This has been errornously enabled in commit 12638c57 Author: Ben Widawsky <ben@bwidawsk.net> Date: Tue May 28 19:22:31 2013 -0700 drm/i915: Enable vebox interrupts Cc: Damien Lespiau <damien.lespiau@intel.com> Cc: Ben Widawsky <ben@bwidawsk.net> Reviewed-by:
-
Daniel Vetter authored
With the simplified locking there's no reason any more to keep the refcounts seperate. v2: Readd the lost comment that ring->irq_refcount is protected by dev_priv->irq_lock. Reviewed-by:
-
Daniel Vetter authored
Now that the rps interrupt locking isn't clearly separated (at elast conceptually) from all the other interrupt locking having a different lock stopped making sense: It protects much more than just the rps workqueue it started out with. But with the addition of VECS the separation started to blurr and resulted in some more complex locking for the ring interrupt refcount. With this we can (again) unifiy the ringbuffer irq refcounts without causing a massive confusion, but that's for the next patch. v2: Explain better why the rps.lock once made sense and why no longer, requested by Ben. Reviewed-by:
-
Daniel Vetter authored
And kill the comment about it. Queueing work is a barrier type event, no amount of locking will help in ordering things (as long as we queue the work after having updated all relevant data structures). Also, the queue_work works itself as a sufficient memory barrier. Again on the surface this is just a tiny micro-optimization to reduce the hold-time of dev_priv->irq_lock. But the better reason is that it reduces superficial locking and so makes it clearer what we actually need for correctness. Reviewed-by:
-
Daniel Vetter authored
The if (pm_iir & ~GEN6_PM_RPS_EVENTS) check was redunandant. Otoh adding a check for rps events allows us to avoid the spinlock grabbing for VECS interrupts. v2: Drop misplaced hunk which now moved to the right patch. Reviewed-by:
-
