- 29 Jul, 2013 1 commit
-
-
Johan Hedberg authored
None of the BlueFRITZ! devices with manufacurer ID 31 (AVM Berlin) support HCI_Read_Local_Supported_Commands. It is safe to use the manufacturer ID (instead of e.g. a USB ID specific quirk) because the company never created any newer controllers. < HCI Command: Read Local Supported Comm.. (0x04|0x0002) plen 0 [hci0] 0.210014 > HCI Event: Command Status (0x0f) plen 4 [hci0] 0.217361 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Unknown HCI Command (0x01) Reported-by:Jörg Esser <jackfritt@boh.de> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Tested-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
- 25 Jul, 2013 8 commits
-
-
AceLan Kao authored
Add support for the AR9462 chip T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e003 Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Cc: Stable <stable@vger.kernel.org> Signed-off-by:
AceLan Kao <acelan.kao@canonical.com> Signed-off-by:
-
Gustavo Padovan authored
If hci_dev_open() is called after hci_register_dev() added the device to the hci_dev_list but before the workqueue are created we could run into a NULL pointer dereference (see below). This bug is very unlikely to happen, systems using bluetoothd to manage their bluetooth devices will never see this happen. BUG: unable to handle kernel NULL pointer dereference 0100 IP: [<ffffffff81077502>] __queue_work+0x32/0x3d0 (...) Call Trace: [<ffffffff81077be5>] queue_work_on+0x45/0x50 [<ffffffffa016e8ff>] hci_req_run+0xbf/0xf0 [bluetooth] [<ffffffffa01709b0>] ? hci_init2_req+0x720/0x720 [bluetooth] [<ffffffffa016ea06>] __hci_req_sync+0xd6/0x1c0 [bluetooth] [<ffffffff8108ee10>] ? try_to_wake_up+0x2b0/0x2b0 [<ffffffff8150e3f0>] ? usb_autopm_put_interface+0x30/0x40 [<ffffffffa016fad5>] hci_dev_open+0x275/0x2e0 [bluetooth] [<ffffffffa0182752>] hci_sock_ioctl+0x1f2/0x3f0 [bluetooth] [<ffffffff815c6050>] sock_do_ioctl+0x30/0x70 [<ffffffff815c75f9>] sock_ioctl+0x79/0x2f0 [<ffffffff811a8046>] do_vfs_ioctl+0x96/0x560 [<ffffffff811a85a1>] SyS_ioctl+0x91/0xb0 [<ffffffff816d989d>] system_call_fastpath+0x1a/0x1f Reported-by:
Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by:
-
AceLan Kao authored
Add support for the AR3012 chip. T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=3121 Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by:
-
Sujith Manoharan authored
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3402 Rev= 0.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Bug: https://bugzilla.kernel.org/show_bug.cgi?id=59701Signed-off-by:
Sujith Manoharan <sujith@msujith.org> Signed-off-by:
-
Adam Lee authored
PTR_ERR() returns a signed long type value which is limited by IS_ERR(), it must be a negative number whose range is [-MAX_ERRNO, 0). The bug here returns negative numbers as error codes, then check it by "if (ret < 0)", but -PTR_ERR() is actually positive. The wrong use here leads to failure as below, even panic. [ 12.958920] Bluetooth: hci0 command 0xfc8e tx timeout [ 14.961765] Bluetooth: hci0 command 0xfc8e tx timeout [ 16.964688] Bluetooth: hci0 command 0xfc8e tx timeout [ 20.954501] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 22.957358] Bluetooth: hci0 command 0xfc8e tx timeout [ 30.948922] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 32.951780] Bluetooth: hci0 command 0xfc8e tx timeout [ 40.943359] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 42.946219] Bluetooth: hci0 command 0xfc8e tx timeout [ 50.937812] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 52.940670] Bluetooth: hci0 command 0xfc8e tx timeout [ 60.932236] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 62.935092] Bluetooth: hci0 command 0xfc8e tx timeout [ 70.926688] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 72.929545] Bluetooth: hci0 command 0xfc8e tx timeout [ 80.921111] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 82.923969] Bluetooth: hci0 command 0xfc2f tx timeout [ 90.915542] Bluetooth: hci0 sending Intel patch command (0xfc2f) failed (-110) [ 92.918406] Bluetooth: hci0 command 0xfc11 tx timeout [ 100.909955] Bluetooth: hci0 sending Intel patch command (0xfc11) failed (-110) [ 102.912858] Bluetooth: hci0 command 0xfc60 tx timeout [ 110.904394] Bluetooth: hci0 sending Intel patch command (0xfc60) failed (-110) [ 112.907293] Bluetooth: hci0 command 0xfc11 tx timeout [ 120.898831] Bluetooth: hci0 exiting Intel manufacturer mode failed (-110) [ 120.904757] bluetoothd[1030]: segfault at 4 ip 00007f8b2eb55236 sp 00007fff53ff6920 error 4 in bluetoothd[7f8b2eaff000+cb000] Signed-off-by:
Adam Lee <adam.lee@canonical.com> Signed-off-by:
-
Stanislaw Gruszka authored
Memory allocated by vmalloc (including stack) can not be used for DMA, i.e. data pointer on usb_control_msg() should not point to stack memory. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=977558Reported-and-tested-by:
Andy Lawrence <dr.diesel@gmail.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Thomas Loo authored
The Fujitsu Lifebook UH552/UH572 ships with a Qualcomm AR9462/AR3012 WLAN/BT-Combo card. Add device ID to the ath3k driver to enable the bluetooth side of things. Patch against v3.10. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04c5 ProdID=1330 Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by:
Thomas Loo <tloo@saltstorm.net> Signed-off-by:
-
Jaganath Kanakkassery authored
The length check is invalid since the length varies with type of info response. This was introduced by the commit cb3b3152 Because of this, l2cap info rsp is not handled and command reject is sent. > ACL data: handle 11 flags 0x02 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x00b8 Enhanced Retransmission mode Streaming mode FCS Option Fixed Channels < ACL data: handle 11 flags 0x00 dlen 10 L2CAP(s): Command rej: reason 0 Command not understood Cc: stable@vger.kernel.org Signed-off-by:
Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by:
Chan-Yeol Park <chanyeol.park@samsung.com> Acked-by:
-
- 24 Jun, 2013 2 commits
-
-
Sujith Manoharan authored
Make sure that a chip reset is done when IDLE is turned off - this fixes authentication timeouts. Cc: stable@vger.kernel.org Reported-by:
Ignacy Gawedzki <i@lri.fr> Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
ath_txq_schedule is called outside of the drv_tx call, so it needs RCU protection. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
- 19 Jun, 2013 2 commits
-
-
-
Johannes Berg authored
Since my commit 3713b4e3 ("nl80211: allow splitting wiphy information in dumps"), nl80211_dump_wiphy() uses the global nl80211_fam.attrbuf for parsing the incoming data. This wouldn't be a problem if it only did so on the first dump iteration which is locked against other commands in generic netlink, but due to space constraints in cb->args (the needed state doesn't fit) I decided to always parse the original message. That's racy though since nl80211_fam.attrbuf could be used by some other parsing in generic netlink concurrently. For now, fix this by allocating a separate parse buffer (it's a bit too big for the stack, currently 1448 bytes on 64-bit). For -next, I'll change the code to parse into the global buffer in the first round only and then allocate a smaller buffer to keep the data in cb->args. Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Acked-by:
David S. Miller <davem@davemloft.net> Acked-by:
Johannes Berg <johannes.berg@intel.com>
-
- 13 Jun, 2013 4 commits
-
-
Arend van Spriel authored
When initialization within brcmf_bus_start() fails on steps before the brcmf_net_attach() the net_device for the primary interface needs to be freed. This patch resolves a panic during kernel boot as reported by Stephen Warren. ref.: http://mid.gmane.org/51AD1F22.2080004@wwwdotorg.orgTested-by:
Stephen Warren <swarren@nvidia.com> Reviewed-by:
Hante Meuleman <meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Daniel Drake authored
There is currently a race condition in the btmrvl_remove_card() which is causing hangs on suspend for OLPC. When the race occurs, kthread_stop() never returns. The problem is that btmrvl_service_main_thread() calls kthread_should_stop() and then does a fair number of things before restarting the loop and sleeping. If the thread gets stopped after kthread_should_stop() is checked, but before the sleep happens, the thread will go to sleep and won't necessarily be woken up. Move the kthread_should_stop() check into a race-free place. Signed-off-by:
Daniel Drake <dsd@laptop.org> Signed-off-by:
-
Johan Hedberg authored
Even though the HCI_Delete_Stored_Link_Key command is mandatory for 1.1 and later controllers some controllers do not seem to support it properly as was witnessed by one Broadcom based controller: < HCI Command: Delete Stored Link Key (0x03|0x0012) plen 7 bdaddr 00:00:00:00:00:00 all 1 > HCI Event: Command Complete (0x0e) plen 4 Delete Stored Link Key (0x03|0x0012) ncmd 1 status 0x11 deleted 0 Error: Unsupported Feature or Parameter Value Luckily this same controller also doesn't list the command in its supported commands bit mask (counting from 0 bit 7 of octet 6): < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local Supported Commands (0x04|0x0002) ncmd 1 status 0x00 Commands: ffffffffffff1ffffffffffff30fffff3f Therefore, it makes sense to move sending of HCI_Delete_Stored_Link_Key to after receiving the supported commands response and to only send it if its respective bit in the mask is set. The downside of this is that we no longer send the HCI_Delete_Stored_Link_Key command for Bluetooth 1.1 controllers since HCI_Read_Local_Supported_Command was introduced in version 1.2, but this is an acceptable penalty as the command in question shouldn't affect critical behavior. Reported-by:Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Anderson Lizardo authored
If a too small MTU value is set with ioctl(HCISETACLMTU) or by a bogus controller, memory corruption happens due to a memcpy() call with negative length. Fix this crash on either incoming or outgoing connections with a MTU smaller than L2CAP_HDR_SIZE + L2CAP_CMD_HDR_SIZE: [ 46.885433] BUG: unable to handle kernel paging request at f56ad000 [ 46.888037] IP: [<c03d94cd>] memcpy+0x1d/0x40 [ 46.888037] *pdpt = 0000000000ac3001 *pde = 00000000373f8067 *pte = 80000000356ad060 [ 46.888037] Oops: 0002 [#1] SMP DEBUG_PAGEALLOC [ 46.888037] Modules linked in: hci_vhci bluetooth virtio_balloon i2c_piix4 uhci_hcd usbcore usb_common [ 46.888037] CPU: 0 PID: 1044 Comm: kworker/u3:0 Not tainted 3.10.0-rc1+ #12 [ 46.888037] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 46.888037] Workqueue: hci0 hci_rx_work [bluetooth] [ 46.888037] task: f59b15b0 ti: f55c4000 task.ti: f55c4000 [ 46.888037] EIP: 0060:[<c03d94cd>] EFLAGS: 00010212 CPU: 0 [ 46.888037] EIP is at memcpy+0x1d/0x40 [ 46.888037] EAX: f56ac1c0 EBX: fffffff8 ECX: 3ffffc6e EDX: f55c5cf2 [ 46.888037] ESI: f55c6b32 EDI: f56ad000 EBP: f55c5c68 ESP: f55c5c5c [ 46.888037] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 46.888037] CR0: 8005003b CR2: f56ad000 CR3: 3557d000 CR4: 000006f0 [ 46.888037] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 46.888037] DR6: ffff0ff0 DR7: 00000400 [ 46.888037] Stack: [ 46.888037] fffffff8 00000010 00000003 f55c5cac f8c6a54c ffffffff f8c69eb2 00000000 [ 46.888037] f4783cdc f57f0070 f759c590 1001c580 00000003 0200000a 00000000 f5a88560 [ 46.888037] f5ba2600 f5a88560 00000041 00000000 f55c5d90 f8c6f4c7 00000008 f55c5cf2 [ 46.888037] Call Trace: [ 46.888037] [<f8c6a54c>] l2cap_send_cmd+0x1cc/0x230 [bluetooth] [ 46.888037] [<f8c69eb2>] ? l2cap_global_chan_by_psm+0x152/0x1a0 [bluetooth] [ 46.888037] [<f8c6f4c7>] l2cap_connect+0x3f7/0x540 [bluetooth] [ 46.888037] [<c019b37b>] ? trace_hardirqs_off+0xb/0x10 [ 46.888037] [<c01a0ff8>] ? mark_held_locks+0x68/0x110 [ 46.888037] [<c064ad20>] ? mutex_lock_nested+0x280/0x360 [ 46.888037] [<c064b9d9>] ? __mutex_unlock_slowpath+0xa9/0x150 [ 46.888037] [<c01a118c>] ? trace_hardirqs_on_caller+0xec/0x1b0 [ 46.888037] [<c064ad08>] ? mutex_lock_nested+0x268/0x360 [ 46.888037] [<c01a125b>] ? trace_hardirqs_on+0xb/0x10 [ 46.888037] [<f8c72f8d>] l2cap_recv_frame+0xb2d/0x1d30 [bluetooth] [ 46.888037] [<c01a0ff8>] ? mark_held_locks+0x68/0x110 [ 46.888037] [<c064b9d9>] ? __mutex_unlock_slowpath+0xa9/0x150 [ 46.888037] [<c01a118c>] ? trace_hardirqs_on_caller+0xec/0x1b0 [ 46.888037] [<f8c754f1>] l2cap_recv_acldata+0x2a1/0x320 [bluetooth] [ 46.888037] [<f8c491d8>] hci_rx_work+0x518/0x810 [bluetooth] [ 46.888037] [<f8c48df2>] ? hci_rx_work+0x132/0x810 [bluetooth] [ 46.888037] [<c0158979>] process_one_work+0x1a9/0x600 [ 46.888037] [<c01588fb>] ? process_one_work+0x12b/0x600 [ 46.888037] [<c015922e>] ? worker_thread+0x19e/0x320 [ 46.888037] [<c015922e>] ? worker_thread+0x19e/0x320 [ 46.888037] [<c0159187>] worker_thread+0xf7/0x320 [ 46.888037] [<c0159090>] ? rescuer_thread+0x290/0x290 [ 46.888037] [<c01602f8>] kthread+0xa8/0xb0 [ 46.888037] [<c0656777>] ret_from_kernel_thread+0x1b/0x28 [ 46.888037] [<c0160250>] ? flush_kthread_worker+0x120/0x120 [ 46.888037] Code: c3 90 8d 74 26 00 e8 63 fc ff ff eb e8 90 55 89 e5 83 ec 0c 89 5d f4 89 75 f8 89 7d fc 3e 8d 74 26 00 89 cb 89 c7 c1 e9 02 89 d6 <f3> a5 89 d9 83 e1 03 74 02 f3 a4 8b 5d f4 8b 75 f8 8b 7d fc 89 [ 46.888037] EIP: [<c03d94cd>] memcpy+0x1d/0x40 SS:ESP 0068:f55c5c5c [ 46.888037] CR2: 00000000f56ad000 [ 46.888037] ---[ end trace 0217c1f4d78714a9 ]--- Signed-off-by:
Anderson Lizardo <anderson.lizardo@openbossa.org> Cc: stable@vger.kernel.org Signed-off-by:
-
- 12 Jun, 2013 23 commits
-
-
-
-
Stanislaw Gruszka authored
My change: commit cee2c731 Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Fri Oct 5 13:44:09 2012 +0200 rt2800: use BBP_R1 for setting tx power unfortunately does not work well with RT5390 and RT3290 chips as they require different temperature compensation TX power settings (TSSI tuning). Since that commit make wireless connection very unstable on those chips, restore previous behavior to fix regression. Once we implement proper TSSI tuning on 5390/3290 we can restore back setting TX power by BBP_R1 register for those chips. Reported-and-tested-by:
Mike Romberg <mike-romberg@comcast.net> Cc: stable@vger.kernel.org Signed-off-by:
Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by:
-
Arend van Spriel authored
This patch fixes a regression introduced by: commit 6da3b6c4 Author: Hauke Mehrtens <hauke@hauke-m.de> Date: Sun Mar 24 01:45:52 2013 +0100 brcmsmac: remove brcms_bss_cfg->associated The regression behaviour was described on mailing list. http://mid.gmane.org/5197DC4F.7030503@broadcom.com: "On laptop I installed kernel with brcmsmac compiled as module. It comes up and associates during boot, but after logging in there is no connectivity. Triggering reassoc gives connectivity for some time, but after a while (1-2 min) it stops." Before the mentioned commit the return value of the function brcms_c_ps_allowed() was always false, which is desired behaviour as power-save is not supported at the moment. Therefor, the function is changed to just return false instead of simply reverting the mentioned commit. Bug: 58471 <https://bugzilla.kernel.org/show_bug.cgi?id=58471> Signed-off-by:
-
Stanislaw Gruszka authored
Since driver does not use control.rates[0].count, we have never set that variable. But currently, after rate control API rewrite, this is required by mac80211. Otherwise legacy rates control does not work and we transmit always at 1Mbit/s on pre 11n networks. Signed-off-by:
-
Kees Cook authored
The module parameter "fwpostfix" is userspace controllable, unfiltered, and is used to define the firmware filename. b43_do_request_fw() populates ctx->errors[] on error, containing the firmware filename. b43err() parses its arguments as a format string. For systems with b43 hardware, this could lead to a uid-0 to ring-0 escalation. CVE-2013-2852 Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Sujith Manoharan authored
The ath9k rate control algorithm has various architectural issues that make it a poor fit in scenarios like congested environments etc. An example: https://bugzilla.redhat.com/show_bug.cgi?id=927191 Change the default to minstrel which is more robust in such cases. The ath9k RC code is left in the driver for now, maybe it can be removed altogether later on. Cc: stable@vger.kernel.org Cc: Jouni Malinen <jouni@qca.qualcomm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Felix Fietkau authored
This reverts commit 68d9e1fa This change reduces rx sensitivity with no apparent extra benefit. It looks like it was meant for testing in a specific scenario, but it was never properly validated. Cc: rmanohar@qca.qualcomm.com Cc: stable@vger.kernel.org Signed-off-by:
-
Sujith Manoharan authored
Almost all the DMA issues which have plagued ath9k (in station mode) for years are related to PS. Disabling PS usually "fixes" the user's connection stablility. Reports of DMA problems are still trickling in and are sitting in the kernel bugzilla. Until the PS code in ath9k is given a thorough review, disbale it by default. The slight increase in chip power consumption is a small price to pay for improved link stability. Cc: stable@vger.kernel.org Signed-off-by:
-
Yijing Wang authored
Fix build error for il_pm_ops if CONFIG_PM is set but CONFIG_PM_SLEEP is not set. ERROR: "il_pm_ops" [drivers/net/wireless/iwlegacy/iwl4965.ko] undefined! ERROR: "il_pm_ops" [drivers/net/wireless/iwlegacy/iwl3945.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Signed-off-by:
Yijing Wang <wangyijing@huawei.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: netdev@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: Jingoo Han <jg1.han@samsung.com> Acked-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Larry Finger authored
This false leak indication is avoided with a no-leak annotation to kmemleak. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Eliad Peller authored
Due to a typo, the current code copies only sizeof(cmd->channels_2) bytes, which is smaller than the correct sizeof(cmd->channels_5) size, resulting in a partial scan (some channels are skipped). Signed-off-by:
Eliad Peller <eliad@wizery.com> Signed-off-by:
Luciano Coelho <coelho@ti.com> Signed-off-by:
-
Luciano Coelho authored
The minimum firmware version required for singlerole after recent driver changes is 6/7.3.10.0.133. Reported-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Luciano Coelho authored
There was a typo in commit 8675f9 (wlcore/wl12xx/wl18xx: verify multi-role and single-role fw versions), which was causing the multirole firmware for wl127x (WiLink6) to be rejected. The actual minimum version needed for wl127x multirole is 6.5.7.0.42. Reported-by:
Levi Pearson <levipearson@gmail.com> Reported-by:
Michael Scott <hashcode0f@gmail.com> Cc: stable@kernel.org # 3.9+ Signed-off-by:
-
Larry Finger authored
Driver rtl8192cu can connect to WPA2 networks, but fails for any other encryption method. The cause is a failure to set the rate control data blocks. These changes fix https://bugzilla.redhat.com/show_bug.cgi?id=952793 and https://bugzilla.redhat.com/show_bug.cgi?id=761525. Signed-off-by:
-
Mark A. Greer authored
When reading the contents of '/sys/kernel/debug/mwifiex/p2p0/info', the following panic occurs: $ cat /sys/kernel/debug/mwifiex/p2p0/info Unable to handle kernel paging request at virtual address 74706164 pgd = de530000 [74706164] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: phy_twl4030_usb omap2430 musb_hdrc mwifiex_sdio mwifiex CPU: 0 PID: 1635 Comm: cat Not tainted 3.10.0-rc1-00010-g1268390 #1 task: de16b6c0 ti: de048000 task.ti: de048000 PC is at strnlen+0xc/0x4c LR is at string+0x3c/0xf8 pc : [<c02c123c>] lr : [<c02c2d1c>] psr: a0000013 sp : de049e10 ip : c06efba0 fp : de6d2092 r10: bf01a260 r9 : ffffffff r8 : 74706164 r7 : 0000ffff r6 : ffffffff r5 : de6d209c r4 : 00000000 r3 : ff0a0004 r2 : 74706164 r1 : ffffffff r0 : 74706164 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 9e530019 DAC: 00000015 Process cat (pid: 1635, stack limit = 0xde048240) Stack: (0xde049e10 to 0xde04a000) 9e00: de6d2092 00000002 bf01a25e de6d209c 9e20: de049e80 c02c438c 0000000a ff0a0004 ffffffff 00000000 00000000 de049e48 9e40: 00000000 2192df6d ff0a0004 ffffffff 00000000 de6d2092 de049ef8 bef3cc00 9e60: de6b0000 dc358000 de6d2000 00000000 00000003 c02c45a4 bf01790c bf01a254 9e80: 74706164 bf018698 00000000 de59c3c0 de048000 de049f80 00001000 bef3cc00 9ea0: 00000008 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9ec0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9ee0: 00000000 00000000 00000000 00000001 00000000 00000000 6669776d 20786569 9f00: 20302e31 2e343128 392e3636 3231702e 00202933 00000000 00000003 c0294898 9f20: 00000000 00000000 00000000 00000000 de59c3c0 c0107c04 de554000 de59c3c0 9f40: 00001000 bef3cc00 de049f80 bef3cc00 de049f80 00000000 00000003 c0108a00 9f60: de048000 de59c3c0 00000000 00000000 de59c3c0 00001000 bef3cc00 c0108b60 9f80: 00000000 00000000 00001000 bef3cc00 00000003 00000003 c0014128 de048000 9fa0: 00000000 c0013f80 00001000 bef3cc00 00000003 bef3cc00 00001000 00000000 9fc0: 00001000 bef3cc00 00000003 00000003 00000001 00000001 00000001 00000003 9fe0: 00000000 bef3cbdc 00011984 b6f1127c 60000010 00000003 18dbdd2c 7f7bfffd [<c02c123c>] (strnlen+0xc/0x4c) from [<c02c2d1c>] (string+0x3c/0xf8) [<c02c2d1c>] (string+0x3c/0xf8) from [<c02c438c>] (vsnprintf+0x1e8/0x3e8) [<c02c438c>] (vsnprintf+0x1e8/0x3e8) from [<c02c45a4>] (sprintf+0x18/0x24) [<c02c45a4>] (sprintf+0x18/0x24) from [<bf01790c>] (mwifiex_info_read+0xfc/0x3e8 [mwifiex]) [<bf01790c>] (mwifiex_info_read+0xfc/0x3e8 [mwifiex]) from [<c0108a00>] (vfs_read+0xb0/0x144) [<c0108a00>] (vfs_read+0xb0/0x144) from [<c0108b60>] (SyS_read+0x44/0x70) [<c0108b60>] (SyS_read+0x44/0x70) from [<c0013f80>] (ret_fast_syscall+0x0/0x30) Code: e12fff1e e3510000 e1a02000 0a00000d (e5d03000) ---[ end trace ca98273dc605a04f ]--- The panic is caused by the mwifiex_info_read() routine assuming that there can only be four modes (0-3) which is an invalid assumption. For example, when testing P2P, the mode is '8' (P2P_CLIENT) so the code accesses data beyond the bounds of the bss_modes[] array which causes the panic. Fix this by updating bss_modes[] to support the current list of modes and adding a check to prevent the out-of-bounds access from occuring in the future when more modes are added. Signed-off-by:
Mark A. Greer <mgreer@animalcreek.com> Acked-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Johan Hedberg authored
If hci_dev_open fails we need to ensure that the corresponding mgmt_set_powered command gets an appropriate response. This patch fixes the missing response by adding a new mgmt_set_powered_failed function that's used to indicate a power on failure to mgmt. Since a situation with the device being rfkilled may require special handling in user space the patch uses a new dedicated mgmt status code for this. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Johan Hedberg authored
There has been code in place to check that the L2CAP length header matches the amount of data received, but many PDU handlers have not been checking that the data received actually matches that expected by the specific PDU. This patch adds passing the length header to the specific handler functions and ensures that those functions fail cleanly in the case of an incorrect amount of data. Signed-off-by:
-
Bing Zhao authored
The register offsets have been changed in SD8897 and newer chips. Define a new btmrvl_sdio_card_reg map for SD88xx. Signed-off-by:
Frank Huang <frankh@marvell.com> Signed-off-by:
-
Johan Hedberg authored
LE-only controllers do not support extended features so any kind of host feature bit checks do not make sense for them. This patch fixes code used for both single-mode (LE-only) and dual-mode (BR/EDR/LE) to use the HCI_LE_ENABLED flag instead of the "Host LE supported" feature bit for LE support tests. Signed-off-by:
-
Moshe Benji authored
Since driver does not use control.rates[0].count, we have never set that variable. But currently, after rate control API rewrite, this is required by mac80211. Otherwise legacy rates control does not work and we transmit always at 1Mbit/s on pre 11n networks. [same fix as for iwlegacy, thanks Stanislaw!] Signed-off-by:
Moshe Benji <Moshe.Benji@intel.com> Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Simon Wunderlich authored
The order of parameters was mixed up, introduced in commit "mac80211: improve the rate control API" Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by:
Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by:
-
Simon Wunderlich authored
When a CAC is running and stop_ap is called (e.g. when hostapd is killed while performing CAC), the CAC must be aborted immediately. Otherwise ieee80211_stop_ap() will try to stop it when it's too late - wdev->channel is already NULL and the abort event can not be generated. Signed-off-by:
-
