- 09 Oct, 2012 40 commits
-
-
Mark Brown authored
Ensure that of_mdio_find_bus() matches the prototype in the header (and stop sparse complaining) by including the header with the prototype. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
We're trying to fill a 64 bit bitmap but only the lower 30 shifts work because the shift wraps around. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Ajit Khaparde authored
On certain platforms, BE hardware could falsely indicate UE. For BE family of NICs, do not set hw_error based on the UE bits. If there was a real fatal error, the corresponding h/w block will automatically go offline and stop traffic. Signed-off-by:
Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by:
-
Haicheng Li authored
Fengguang reported a kernel build failure as following: drivers/built-in.o: In function `pch_gbe_ioctl': pch_gbe_main.c:(.text+0x510370): undefined reference to `pch_ch_control_write' pch_gbe_main.c:(.text+0x510393): undefined reference to `pch_ch_control_write' pch_gbe_main.c:(.text+0x5103b3): undefined reference to `pch_ch_control_write' ... It's a regression by commit da158646. The root cause is that the CONFIG_PPS is not set there, consequently CONFIG_PTP_1588_CLOCK can not be set anyway, which finally causes ptp_pch and pch_gbe_main build failures. As David prefers to use *select* to fix such module co-dependency issues, this patch explicitly selects all the possible dependencies of PCH_PTP. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Reviewed-by:
Haicheng Li <haicheng.lee@gmail.com> Signed-off-by:
-
git://git.infradead.org/users/dhowells/linux-headersDavid S. Miller authored
UAPI Disintegration 2012-10-09 Signed-off-by: -
git://git.infradead.org/users/dhowells/linux-headersDavid S. Miller authored
UAPI Disintegration 2012-10-09 Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linuxDavid S. Miller authored
Pulled mainline in order to get the UAPI infrastructure already merged before I pull in David Howells's UAPI trees for networking. Signed-off-by: -
Linus Torvalds authored
The VM_RESERVED flag was killed off in commit 314e51b9 ("mm: kill vma flag VM_RESERVED and mm->reserved_vm counter"), and replaced by the proper semantic flags (eg "don't core-dump" etc). But there was a new use of VM_RESERVED that got missed by the merge. Fix the remaining use of VM_RESERVED in the vfio_pci driver, replacing the VM_RESERVED flag with VM_DONTEXPAND | VM_DONTDUMP. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation,org>
-
Bruce Allan authored
i218 is the next-generation LOM that will be available on systems with the Lynx Point LP Platform Controller Hub (PCH) chipset from Intel. This patch provides the initial support of those devices. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This change limits the PF/VF driver to 9.5K max jumbo frame size in order prevent a possible Tx hang in the adapter when sending frames between pools. All of the parts in ixgbe support a maximum frame of 15.5K for standard traffic, however with SR-IOV or DCB enabled they should be limiting the MTU size to 9.5K. Instead of adding extra checks which would have to change the MTU when we go into or out of these modes it is preferred to just use a standard 9.5K MTU limit for all modes so that this extra overhead can be avoided. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by:
Sibai Li <sibai.li@intel.com> Signed-off-by:
-
Greg Rose authored
The driver was not setting the number of real Tx queues in the net_device structure. This caused some serious issues such as Tx hangs and extremely poor performance with some usages of the driver. The issue is best observed by running: iperf -c <host> -P <n> Where n is greater than one. The greater the value of n the more likely the problem is to show up. Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Signed-off-by:
-
David Howells authored
Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Michael Kerrisk <mtk.manpages@gmail.com> Acked-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by:
Dave Jones <davej@redhat.com>
-
David Howells authored
Signed-off-by:
-
David Howells authored
Signed-off-by:
-
David Howells authored
Signed-off-by:
-
David Howells authored
Signed-off-by:
-
David Howells authored
Signed-off-by:
-
David Howells authored
Signed-off-by:
-
David Howells authored
Signed-off-by:
-
David Howells authored
Signed-off-by:
-
David Howells authored
Signed-off-by:
-
Linus Torvalds authored
Merge patches from Andrew Morton: "A few misc things and very nearly all of the MM tree. A tremendous amount of stuff (again), including a significant rbtree library rework." * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (160 commits) sparc64: Support transparent huge pages. mm: thp: Use more portable PMD clearing sequenece in zap_huge_pmd(). mm: Add and use update_mmu_cache_pmd() in transparent huge page code. sparc64: Document PGD and PMD layout. sparc64: Eliminate PTE table memory wastage. sparc64: Halve the size of PTE tables sparc64: Only support 4MB huge pages and 8KB base pages. memory-hotplug: suppress "Trying to free nonexistent resource <XXXXXXXXXXXXXXXX-YYYYYYYYYYYYYYYY>" warning mm: memcg: clean up mm_match_cgroup() signature mm: document PageHuge somewhat mm: use %pK for /proc/vmallocinfo mm, thp: fix mlock statistics mm, thp: fix mapped pages avoiding unevictable list on mlock memory-hotplug: update memory block's state and notify userspace memory-hotplug: preparation to notify memory block's state at memory hot remove mm: avoid section mismatch warning for memblock_type_name make GFP_NOTRACK definition unconditional cma: decrease cc.nr_migratepages after reclaiming pagelist CMA: migrate mlocked pages kpageflags: fix wrong KPF_THP on non-huge compound pages ...
-
David Miller authored
This is relatively easy since PMD's now cover exactly 4MB of memory. Our PMD entries are 32-bits each, so we use a special encoding. The lowest bit, PMD_ISHUGE, determines the interpretation. This is possible because sparc64's page tables are purely software entities so we can use whatever encoding scheme we want. We just have to make the TLB miss assembler page table walkers aware of the layout. set_pmd_at() works much like set_pte_at() but it has to operate in two page from a table of non-huge PTEs, so we have to queue up TLB flushes based upon what mappings are valid in the PTE table. In the second regime we are going from huge-page to non-huge-page, and in that case we need only queue up a single TLB flush to push out the huge page mapping. We still have 5 bits remaining in the huge PMD encoding so we can very likely support any new pieces of THP state tracking that might get added in the future. With lots of help from Johannes Weiner. Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Miller authored
Invalidation sequences are handled in various ways on various architectures. One way, which sparc64 uses, is to let the set_*_at() functions accumulate pending flushes into a per-cpu array. Then the flush_tlb_range() et al. calls process the pending TLB flushes. In this regime, the __tlb_remove_*tlb_entry() implementations are essentially NOPs. The canonical PTE zap in mm/memory.c is: ptent = ptep_get_and_clear_full(mm, addr, pte, tlb->fullmm); tlb_remove_tlb_entry(tlb, pte, addr); With a subsequent tlb_flush_mmu() if needed. Mirror this in the THP PMD zapping using: orig_pmd = pmdp_get_and_clear(tlb->mm, addr, pmd); page = pmd_page(orig_pmd); tlb_remove_pmd_tlb_entry(tlb, pmd, addr); And we properly accomodate TLB flush mechanims like the one described above. Signed-off-by:
-
David Miller authored
The transparent huge page code passes a PMD pointer in as the third argument of update_mmu_cache(), which expects a PTE pointer. This never got noticed because X86 implements update_mmu_cache() as a macro and thus we don't get any type checking, and X86 is the only architecture which supports transparent huge pages currently. Before other architectures can support transparent huge pages properly we need to add a new interface which will take a PMD pointer as the third argument rather than a PTE pointer. [akpm@linux-foundation.org: implement update_mm_cache_pmd() for s390] Signed-off-by:
-
David Miller authored
We're going to be messing around with the PMD interpretation and layout for the sake of transparent huge pages, so we better clearly document what we're starting with. Signed-off-by:
-
David Miller authored
We've split up the PTE tables so that they take up half a page instead of a full page. This is in order to facilitate transparent huge page support, which works much better if our PMDs cover 4MB instead of 8MB. What we do is have a one-behind cache for PTE table allocations in the mm struct. This logic triggers only on allocations. For example, we don't try to keep track of free'd up page table blocks in the style that the s390 port does. There were only two slightly annoying aspects to this change: 1) Changing pgtable_t to be a "pte_t *". There's all of this special logic in the TLB free paths that needed adjustments, as did the PMD populate interfaces. 2) init_new_context() needs to zap the pointer, since the mm struct just gets copied from the parent on fork. Signed-off-by:
-
David Miller authored
The reason we want to do this is to facilitate transparent huge page support. Right now PMD's cover 8MB of address space, and our huge page size is 4MB. The current transparent hugepage support is not able to handle HPAGE_SIZE != PMD_SIZE. So make PTE tables be sized to half of a page instead of a full page. We can still map properly the whole supported virtual address range which on sparc64 requires 44 bits. Add a compile time CPP test which ensures that this requirement is always met. There is a minor inefficiency added by this change. We only use half of the page for PTE tables. It's not trivial to use only half of the page yet still get all of the pgtable_page_{ctor,dtor}() stuff working properly. It is doable, and that will come in a subsequent change. Signed-off-by: -
David Miller authored
Narrowing the scope of the page size configurations will make the transparent hugepage changes much simpler. In the end what we really want to do is have the kernel support multiple huge page sizes and use whatever is appropriate as the context dictactes. Signed-off-by:
-
Yasuaki Ishimatsu authored
memory-hotplug: suppress "Trying to free nonexistent resource <XXXXXXXXXXXXXXXX-YYYYYYYYYYYYYYYY>" warning When our x86 box calls __remove_pages(), release_mem_region() shows many warnings. And x86 box cannot unregister iomem_resource. "Trying to free nonexistent resource <XXXXXXXXXXXXXXXX-YYYYYYYYYYYYYYYY>" release_mem_region() has been changed to be called in each PAGES_PER_SECTION by commit de7f0cba ("memory hotplug: release memory regions in PAGES_PER_SECTION chunks"). Because powerpc registers iomem_resource in each PAGES_PER_SECTION chunk. But when I hot add memory on x86 box, iomem_resource is register in each _CRS not PAGES_PER_SECTION chunk. So x86 box unregisters iomem_resource. The patch fixes the problem. Signed-off-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Len Brown <len.brown@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Christoph Lameter <cl@linux.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Nathan Fontenot <nfont@austin.ibm.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by:
-
Johannes Weiner authored
It really should return a boolean for match/no match. And since it takes a memcg, not a cgroup, fix that parameter name as well. [akpm@linux-foundation.org: mm_match_cgroup() is not a macro] Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
Andrew Morton authored
Acked-by:
David Rientjes <rientjes@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
Kees Cook authored
In the paranoid case of sysctl kernel.kptr_restrict=2, mask the kernel virtual addresses in /proc/vmallocinfo too. Signed-off-by:
Kees Cook <keescook@chromium.org> Reported-by:
Brad Spengler <spender@grsecurity.net> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by:
-
David Rientjes authored
NR_MLOCK is only accounted in single page units: there's no logic to handle transparent hugepages. This patch checks the appropriate number of pages to adjust the statistics by so that the correct amount of memory is reflected. Currently: $ grep Mlocked /proc/meminfo Mlocked: 19636 kB #define MAP_SIZE (4 << 30) /* 4GB */ void *ptr = mmap(NULL, MAP_SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0); mlock(ptr, MAP_SIZE); $ grep Mlocked /proc/meminfo Mlocked: 29844 kB munlock(ptr, MAP_SIZE); $ grep Mlocked /proc/meminfo Mlocked: 19636 kB And with this patch: $ grep Mlock /proc/meminfo Mlocked: 19636 kB mlock(ptr, MAP_SIZE); $ grep Mlock /proc/meminfo Mlocked: 4213664 kB munlock(ptr, MAP_SIZE); $ grep Mlock /proc/meminfo Mlocked: 19636 kB Signed-off-by:
Hugh Dickens <hughd@google.com> Acked-by:
Andrea Arcangeli <aarcange@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by:
Michel Lespinasse <walken@google.com> Signed-off-by:
-
David Rientjes authored
When a transparent hugepage is mapped and it is included in an mlock() range, follow_page() incorrectly avoids setting the page's mlock bit and moving it to the unevictable lru. This is evident if you try to mlock(), munlock(), and then mlock() a range again. Currently: #define MAP_SIZE (4 << 30) /* 4GB */ void *ptr = mmap(NULL, MAP_SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0); mlock(ptr, MAP_SIZE); $ grep -E "Unevictable|Inactive\(anon" /proc/meminfo Inactive(anon): 6304 kB Unevictable: 4213924 kB munlock(ptr, MAP_SIZE); Inactive(anon): 4186252 kB Unevictable: 19652 kB mlock(ptr, MAP_SIZE); Inactive(anon): 4198556 kB Unevictable: 21684 kB Notice that less than 2MB was added to the unevictable list; this is because these pages in the range are not transparent hugepages since the 4GB range was allocated with mmap() and has no specific alignment. If posix_memalign() were used instead, unevictable would not have grown at all on the second mlock(). The fix is to call mlock_vma_page() so that the mlock bit is set and the page is added to the unevictable list. With this patch: mlock(ptr, MAP_SIZE); Inactive(anon): 4056 kB Unevictable: 4213940 kB munlock(ptr, MAP_SIZE); Inactive(anon): 4198268 kB Unevictable: 19636 kB mlock(ptr, MAP_SIZE); Inactive(anon): 4008 kB Unevictable: 4213940 kB Signed-off-by:
-
Wen Congyang authored
remove_memory() will be called when hot removing a memory device. But even if offlining memory, we cannot notice it. So the patch updates the memory block's state and sends notification to userspace. Additionally, the memory device may contain more than one memory block. If the memory block has been offlined, __offline_pages() will fail. So we should try to offline one memory block at a time. Thus remove_memory() also check each memory block's state. So there is no need to check the memory block's state before calling remove_memory(). Signed-off-by:
Wen Congyang <wency@cn.fujitsu.com> Signed-off-by:
-
Wen Congyang authored
remove_memory() is called in two cases: 1. echo offline >/sys/devices/system/memory/memoryXX/state 2. hot remove a memory device In the 1st case, the memory block's state is changed and the notification that memory block's state changed is sent to userland after calling remove_memory(). So user can notice memory block is changed. But in the 2nd case, the memory block's state is not changed and the notification is not also sent to userspcae even if calling remove_memory(). So user cannot notice memory block is changed. For adding the notification at memory hot remove, the patch just prepare as follows: 1st case uses offline_pages() for offlining memory. 2nd case uses remove_memory() for offlining memory and changing memory block's state and notifing the information. The patch does not implement notification to remove_memory(). Signed-off-by: -
Raghavendra D Prabhu authored
Following section mismatch warning is thrown during build; WARNING: vmlinux.o(.text+0x32408f): Section mismatch in reference from the function memblock_type_name() to the variable .meminit.data:memblock The function memblock_type_name() references the variable __meminitdata memblock. This is often because memblock_type_name lacks a __meminitdata annotation or the annotation of memblock is wrong. This is because memblock_type_name makes reference to memblock variable with attribute __meminitdata. Hence, the warning (even if the function is inline). [akpm@linux-foundation.org: remove inline] Signed-off-by:Raghavendra D Prabhu <rprabhu@wnohang.net> Cc: Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Glauber Costa authored
There was a general sentiment in a recent discussion (See https://lkml.org/lkml/2012/9/18/258) that the __GFP flags should be defined unconditionally. Currently, the only offender is GFP_NOTRACK, which is conditional to KMEMCHECK. Signed-off-by:
Glauber Costa <glommer@parallels.com> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by:
-
Minchan Kim authored
reclaim_clean_pages_from_list() reclaims clean pages before migration so cc.nr_migratepages should be updated. Currently, there is no problem but it can be wrong if we try to use the value in future. Signed-off-by:
Minchan Kim <minchan@kernel.org> Acked-by:
Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
