- 23 Aug, 2019 3 commits
-
-
Stuart Summers authored
Use a local variable to find SSEU runtime information in various debugfs functions. v2: Remove extra line breaks per feedback from Chris Signed-off-by:
Stuart Summers <stuart.summers@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Michel Thierry authored
HCP/MFX power gating is disabled by default, turn it on for the vd units available. User space will also issue a MI_FORCE_WAKEUP properly to wake up proper subwell. During driver load, init_clock_gating happens after device_info_init_mmio read the vdbox disable fuse register, so only present vd units will have these enabled. BSpec: 14214 HSDES: 1209977827 Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Tony Ye <tony.ye@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-3-lucas.demarchi@intel.com
-
Michel Thierry authored
GAM registers located in the 0x4xxx range have been relocated to 0xCxxx; this is to make space for global MOCS registers. v2: Rename register and bitfield to its new name (suggested by Mika) HSD: 399379 Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
-
- 22 Aug, 2019 14 commits
-
-
Manasi Navare authored
This patch fixes the intel_configure_pps_for_dsc_encoder() function to use cpu_transcoder instead of encoder->type to select the correct DSC registers that was wrongly used in the original patch for one DSC register isntance. Fixes: 7182414e ("drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling") Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.0+ Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190821215950.24223-1-manasi.d.navare@intel.com
-
Anusha Srivatsa authored
DSC engine on ICL supports only 8 and 10 BPC as the input BPC. But DSC engine in TGL supports 8, 10 and 12 BPC. Add 12 BPC support for DSC while calculating compression configuration. v2: Remove the separate define TGL_DP_DSC_MAX_SUPPORTED_BPC and use the value directly.(More such defines can be removed as part of future patches). (Ville) v3: Use values directly instead of accessing the defines everytime for min and max DSC BPC. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
-
José Roberto de Souza authored
No need to unmask PSR interrutpion if PSR is not enabled, better move the call to intel_psr_enable_source(). v2: Renamed intel_psr_irq_control() to psr_irq_control() (Lucas) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
José Roberto de Souza authored
According to PSR2_CTL definition in BSpec there is only one instance of PSR2_CTL. Platforms gen < 12 with EDP transcoder only support PSR2 on TRANSCODER_EDP while on TGL PSR2 is only supported by TRANSCODER_A. Since BDW PSR is allowed on any port, but we need to restrict by transcoder. v8: Renamed _psr2_supported_in_trans() to psr2_supported() (Lucas) v9: Renamed psr2_supported() to transcoder_has_psr2() (Ville) BSpec: 7713 BSpec: 20584 Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190820223325.27490-2-jose.souza@intel.com
-
José Roberto de Souza authored
PSR registers are a mess, some have the full address while others just have the additional offset from psr_mmio_base. For BDW+ psr_mmio_base is nothing more than TRANSCODER_EDP_OFFSET + 0x800 and using it makes more difficult for people with an PSR register address or PSR register name from from BSpec as i915 also don't match the BSpec names. For HSW psr_mmio_base is _DDI_BUF_CTL_A + 0x800 and PSR registers are only available in DDIA. Other reason to make relative to transcoder is that since BDW every transcoder have PSR registers, so in theory it should be possible to have PSR enabled in a non-eDP transcoder. So for BDW+ we can use _TRANS2() to get the register offset of any PSR register in any transcoder while for HSW we have _HSW_PSR_ADJ that will calculate the register offset for the single PSR instance, noting that we are already guarded about trying to enable PSR in other port than DDIA on HSW by the 'if (dig_port->base.port != PORT_A)' in intel_psr_compute_config(), this check should only be valid for HSW and will be changed in future. PSR2 registers and PSR_EVENT was added after Haswell so that is why _PSR_ADJ() is not used in some macros. The only registers that can not be relative to transcoder are PSR_IMR and PSR_IIR that are not relative to anything, so keeping it hardcoded. That changed for TGL but it will be handled in another patch. Also removing BDW_EDP_PSR_BASE from GVT because it is not used as it is the only PSR register that GVT have. v5: - Macros changed to be more explicit about HSW (Dhinakaran) - Squashed with the patch that added the tran parameter to the macros (Dhinakaran) v6: - Checking for interruption errors after module reload in the transcoder that will be used (Dhinakaran) - Using lowercase to the registers offsets v7: - Removing IS_HASWELL() from registers macros(Jani) Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Reviewed-by:
-
Rodrigo Vivi authored
Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Chris Wilson authored
You have to cut it off at the neck, otherwise it just reappears in the next merge, like it did in commit 3f866026f0ce ("Merge drm/drm-next into drm-intel-next-queued") References: 3f866026f0ce ("Merge drm/drm-next into drm-intel-next-queued") Signed-off-by:Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190822065917.18988-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Avoid calling i915_vma_put_fence() by using our alternate paths that bind a secondary vma avoiding the original fenced vma. For the few instances where we need to release the fence (i.e. on binding when the GGTT range becomes invalid), replace the put_fence with a revoke_fence. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190822061557.18402-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Since we want to revoke the ggtt vma from only under the ggtt->mutex, we need to move protection of the userfault tracking from the struct_mutex to the ggtt->mutex. Signed-off-by:
-
Chris Wilson authored
We can reduce the locking for fence registers from the dev->struct_mutex to a local mutex. We could introduce a mutex for the sole purpose of tracking the fence acquisition, except there is a little bit of overlap with the fault tracking, so use the i915_ggtt.mutex as it covers both. Signed-off-by:
-
Chris Wilson authored
Extract the dma-fence worker used by clflush for wider use, as we anticipate using workers coupled to dma-fences more frequently. Signed-off-by:
-
Rodrigo Vivi authored
We need the rename of reservation_object to dma_resv. The solution on this merge came from linux-next: From: Stephen Rothwell <sfr@canb.auug.org.au> Date: Wed, 14 Aug 2019 12:48:39 +1000 Subject: [PATCH] drm: fix up fallout from "dma-buf: rename reservation_object to dma_resv" Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> --- drivers/gpu/drm/i915/gt/intel_engine_pool.c | 8 ++++---- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/i915/gt/intel_engine_pool.c b/drivers/gpu/drm/i915/gt/intel_engine_pool.c index 03d90b49584a..4cd54c569911 100644 --- a/drivers/gpu/drm/i915/gt/intel_engine_pool.c +++ b/drivers/gpu/drm/i915/gt/intel_engine_pool.c @@ -43,12 +43,12 @@ static int pool_active(struct i915_active *ref) { struct intel_engine_pool_node *node = container_of(ref, typeof(*node), active); - struct reservation_object *resv = node->obj->base.resv; + struct dma_resv *resv = node->obj->base.resv; int err; - if (reservation_object_trylock(resv)) { - reservation_object_add_excl_fence(resv, NULL); - reservation_object_unlock(resv); + if (dma_resv_trylock(resv)) { + dma_resv_add_excl_fence(resv, NULL); + dma_resv_unlock(resv); } err = i915_gem_object_pin_pages(node->obj); which is a simplified version from a previous one which had: Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
https://git.pengutronix.de/git/lst/linuxDave Airlie authored
Most importantly per-process address spaces on GPUs that are capable of providing proper isolation has finished baking. This is the base for our softpin implementation, which allows us to support the texture descriptor buffers used by GC7000 series GPUs without a major UAPI extension/rework. Shortlog of notable changes: - code cleanup from Fabio - fix performance counters on GC880 and GC2000 GPUs from Christian - drmP.h header removal from Sam - per process address space support on MMUv2 GPUs from me - softpin support from me Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/1565946875.2641.73.camel@pengutronix.de
-
git://linuxtv.org/pinchartl/mediaDave Airlie authored
- R-Car DU fixes - Misc. DRM cleanups Signed-off-by:
-
- 21 Aug, 2019 14 commits
-
-
Chris Wilson authored
In commit 70d6894d ("drm/i915: Serialize against vma moves") I managed to miss a couple of i915_vma_move_to_active() that had not serialised against an async vma pinning. Add the missing i915_request_await. Signed-off-by:
-
Xiong Zhang authored
The following call trace may exist in linux guest dmesg when guest i915 driver is unloaded. [ 90.776610] [drm:vgt_deballoon_space.isra.0 [i915]] deballoon space: range [0x0 - 0x0] 0 KiB. [ 90.776621] BUG: unable to handle kernel NULL pointer dereference at 00000000000000c0 [ 90.776691] IP: drm_mm_remove_node+0x4d/0x320 [drm] [ 90.776718] PGD 800000012c7d0067 P4D 800000012c7d0067 PUD 138e4c067 PMD 0 [ 90.777091] task: ffff9adab60f2f00 task.stack: ffffaf39c0fe0000 [ 90.777142] RIP: 0010:drm_mm_remove_node+0x4d/0x320 [drm] [ 90.777573] Call Trace: [ 90.777653] intel_vgt_deballoon+0x4c/0x60 [i915] [ 90.777729] i915_ggtt_cleanup_hw+0x121/0x190 [i915] [ 90.777792] i915_driver_unload+0x145/0x180 [i915] [ 90.777856] i915_pci_remove+0x15/0x20 [i915] [ 90.777890] pci_device_remove+0x3b/0xc0 [ 90.777916] device_release_driver_internal+0x157/0x220 [ 90.777945] driver_detach+0x39/0x70 [ 90.777967] bus_remove_driver+0x51/0xd0 [ 90.777990] pci_unregister_driver+0x23/0x90 [ 90.778019] SyS_delete_module+0x1da/0x240 [ 90.778045] entry_SYSCALL_64_fastpath+0x24/0x87 [ 90.778072] RIP: 0033:0x7f34312af067 [ 90.778092] RSP: 002b:00007ffdea3da0d8 EFLAGS: 00000206 [ 90.778297] RIP: drm_mm_remove_node+0x4d/0x320 [drm] RSP: ffffaf39c0fe3dc0 [ 90.778344] ---[ end trace f4b1bc8305fc59dd ]--- Four drm_mm_node are used to reserve guest ggtt space, but some of them may be skipped and not initialised due to space constraints in intel_vgt_balloon(). If drm_mm_remove_node() is called with uninitialized drm_mm_node, the above call trace occurs. This patch check drm_mm_node's validity before calling drm_mm_remove_node(). Fixes: ff8f7975("drm/i915: return the correct usable aperture size under gvt environment") Cc: stable@vger.kernel.org Signed-off-by:
Xiong Zhang <xiong.y.zhang@intel.com> Acked-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Reviewed-by:
-
Chris Wilson authored
These should have been validated in the upper layers, but for sanity's sake, repeat them. Signed-off-by:
-
Ville Syrjälä authored
We're not allowed to create new properties after device registration so for MST connectors we need to either create the max_bpc property earlier, or we reuse one we already have. Let's do the latter apporach since the corresponding SST connector already has the prop and its min/max are correct also for the MST connector. The problem was highlighted by commit 4f5368b5 ("drm/kms: Catch mode_object lifetime errors") which results in the following spew: [ 1330.878941] WARNING: CPU: 2 PID: 1554 at drivers/gpu/drm/drm_mode_object.c:45 __drm_mode_object_add+0xa0/0xb0 [drm] ... [ 1330.879008] Call Trace: [ 1330.879023] drm_property_create+0xba/0x180 [drm] [ 1330.879036] drm_property_create_range+0x15/0x30 [drm] [ 1330.879048] drm_connector_attach_max_bpc_property+0x62/0x80 [drm] [ 1330.879086] intel_dp_add_mst_connector+0x11f/0x140 [i915] [ 1330.879094] drm_dp_add_port.isra.20+0x20b/0x440 [drm_kms_helper] ... Cc: stable@vger.kernel.org Cc: Lyude Paul <lyude@redhat.com> Cc: sunpeng.li@amd.com Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <sean@poorly.run> Fixes: 5ca0ef8a ("drm/i915: Add max_bpc property for DP MST") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190820161657.9658-1-ville.syrjala@linux.intel.comReviewed-by:
Lyude Paul <lyude@redhat.com>
-
Chris Wilson authored
Since we now run process_csb() outside of the engine->active.lock, we can process a CS-event immediately upon our ELSP write. As we currently inspect the pending queue *after* the ELSP write, there is an opportunity for a CS-event to update the pending queue before we can read it, making ourselves chases an invalid pointer. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111427 Fixes: df403069 ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock") Signed-off-by:
-
Chris Wilson authored
When under severe stress for GTT mappable space, the LRU eviction model falls off a cliff. We spend all our time scanning the much larger non-mappable area searching for something within the mappable zone we can evict. Turn this on its head by only using the full vma for the object if it is already pinned in the mappable zone or there is sufficient *free* space to accommodate it (prioritizing speedy reuse). If there is not, immediately fall back to using small chunks (tilerow for GTT mmap, single pages for pwrite/relocation) and using random eviction before doing a full search. Testcase: igt/gem_concurrent_blt References: https://bugs.freedesktop.org/show_bug.cgi?id=110848Signed-off-by:
-
Chris Wilson authored
We need asm/smp.h for wbinvd_on_all_cpus() Reported-by: kbuild-all@01.org Signed-off-by:
-
Jani Nikula authored
It's static const data, make it so. Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
Ramalingam C <ramalingam.c@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190820134019.13229-5-jani.nikula@intel.com
-
Jani Nikula authored
Split struct declaration and array definition. Fix indents and whitespace. No functional changes. Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
-
Jani Nikula authored
It's static const data, make it so. Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
-
Jani Nikula authored
Everything seems to be all right, but shadowing is to be avoided. Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
-
Jani Nikula authored
Split struct declaration and array definition. Fix indents and whitespace. No functional changes. Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
-
Chris Wilson authored
When inserting the final level PTE, we check that we are not overflowing the page table (checking that pt_used does not exceed the size of the table). However, we have to allow for every other PTE to be pinned by a simultaneous removal thread (as on remove we bump the pt_used counter before adjusting the table). Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 5.4: UAPI Changes: Cross-subsystem Changes: Core Changes: - dma-buf: add reservation_object_fences helper, relax reservation_object_add_shared_fence, remove reservation_object seq number (and then restored) - dma-fence: Shrinkage of the dma_fence structure, Merge dma_fence_signal and dma_fence_signal_locked, Store the timestamp in struct dma_fence in a union with cb_list Driver Changes: - More dt-bindings YAML conversions - More removal of drmP.h includes - dw-hdmi: Support get_eld and various i2s improvements - gm12u320: Few fixes - meson: Global cleanup - panfrost: Few refactors, Support for GPU heap allocations - sun4i: Support for DDC enable GPIO - New panels: TI nspire, NEC NL8048HL11, LG Philips LB035Q02, Sharp LS037V7DW01, Sony ACX565AKM, Toppoly TD028TTEC1 Toppoly TD043MTEA1 Signed-off-by:
-
- 20 Aug, 2019 9 commits
-
-
Ville Syrjälä authored
Each fake MST encoder is tied to a specific pipe. Fix the encoder's crtc_mask to reflect that fact. Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
-
Lucas De Marchi authored
2 important fixes: - vblank counter is now working - PSR1 is working Cc: Jose Souza <jose.souza@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
José Roberto de Souza authored
When trying to read registers from transcoder C and D while PG3 is ON it causes unclaimed access warnings. Adding the powerwells for the pipes fixes the issue, but doesn't match the spec. Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190817093902.2171-4-lucas.demarchi@intel.com
-
Michel Thierry authored
There are no changes with respect to GEN11, which Paulo wrote. This gets rid of the "Missing switch case in read_timestamp_frequency" message at boot for Tiger Lake. [ Lucas: BSpec: 10742 and 9024, but there's a mismatch on the values. Let's say a glitch in the spec. Tested locally and it works. ] Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by:
-
Lucas De Marchi authored
The current SKUs added for Tiger Lake don't have DDIC hooked up, even though it is supported by the SoC. The current state for these SKUs is problematic since while enabling the combo phy, PORT_COMP_DW* return 0xFFFFFFFF, which is invalid per register definition. During initialization we check what phys are not yet enabled by reading PHY_MISC_C and try to enable it by toggling the "DE to IO Comp Pwr Down" bit. But after that any read to the PORT_COMP_DW* returns invalid results. This removes the following warning [56997.634353] Missing case (val == 4294967295) [56997.639241] WARNING: CPU: 5 PID: 768 at drivers/gpu/drm/i915/display/intel_combo_phy.c:54 cnl_get_procmon_ref_values+0xc9/0xf0 [i915] [56997.639808] Modules linked in: i915(+) prime_numbers x86_pkg_temp_thermal coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel e1000e [last unloaded: prime_numbers] [56997.639808] CPU: 5 PID: 768 Comm: insmod Tainted: G U W 5.2.0-demarchi+ #65 [56997.639808] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLSFWI1.R00.2252.A03.1906270154 06/27/2019 [56997.639808] RIP: 0010:cnl_get_procmon_ref_values+0xc9/0xf0 [i915] [56997.639808] Code: 2c a0 85 c9 74 e0 81 f9 00 00 00 01 75 09 48 c7 c0 0c a4 2c a0 eb cf 48 c7 c6 3c 3a 31 a0 48 c7 c7 40 3a 31 a0 e8 6b 4d ea e0 <0f> 0b 48 c7 c0 00 a4 2c a0 eb b1 48 c7 c0 24 a4 2 c a0 eb a8 e8 be [56997.639808] RSP: 0018:ffffc9000068f8a8 EFLAGS: 00010286 [56997.639808] RAX: 0000000000000000 RBX: ffff88848fa90000 RCX: 0000000000000000 [56997.639808] RDX: ffff8884a08b5ef8 RSI: ffff8884a08a6658 RDI: 00000000ffffffff [56997.639808] RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 [56997.639808] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88848fa90000 [56997.639808] R13: 0000000000000000 R14: 0000000000000002 R15: 0006c00000162000 [56997.639808] FS: 00007f61ca3d12c0(0000) GS:ffff8884a0880000(0000) knlGS:0000000000000000 [56997.639808] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [56997.639808] CR2: 00007f71be6a92c0 CR3: 0000000494750006 CR4: 0000000000760ee0 [56997.639808] PKRU: 55555554 [56997.639808] Call Trace: [56997.639808] cnl_verify_procmon_ref_values+0x36/0xf0 [i915] [56997.639808] ? rcu_read_lock_sched_held+0x6f/0x80 [56997.639808] ? gen11_fwtable_read32+0x257/0x290 [i915] [56997.639808] icl_combo_phy_verify_state.part.0+0x22/0xa0 [i915] [56997.639808] intel_combo_phy_init+0x17e/0x3e0 [i915] [56997.639808] ? icl_display_core_init+0x2c/0x1a0 [i915] [56997.639808] ? _raw_spin_unlock_irqrestore+0x4c/0x60 [56997.639808] icl_display_core_init+0x34/0x1a0 [i915] [56997.639808] intel_power_domains_init_hw+0x200/0x570 [i915] [56997.639808] i915_driver_probe+0x103b/0x17e0 [i915] [56997.639808] ? printk+0x53/0x6a [56997.639808] i915_pci_probe+0x3b/0x190 [i915] We may or may not need to change the implementation to account for DDIC being available on other SKUs. For now I think the best thing to do is to just disable the port. Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190814235517.10032-1-lucas.demarchi@intel.com
-
Rodrigo Vivi authored
Signed-off-by: -
Chris Wilson authored
The current assertion tries to make sure that we do not over count the number of used PDE inside a page directory -- that is with an array of 512 pde, we do not expect more than 512 elements used! However, our assertion has to take into account that as we pin an element into the page directory, the caller first pins the page directory so the usage count is one higher. However, this should be one extra pin per thread, and the upper bound is that we may have one thread for each entry. Signed-off-by:
-
Daniele Ceraolo Spurio authored
This is only required for a single platform so no need to reserve the memory on all of them. This removes the last direct dependency of i915_drv.h on i915_reg.h (apart from the i915_reg_t definition). v2: drop unneeded diff, keep the vlv prefix, call functions unconditionally (Jani), fwd declaration of the struct (Chris) Signed-off-by:Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Daniele Ceraolo Spurio authored
Re-use Gen11 context size for now. [ Lucas: this is a temporary enabling patch that needs to be confirmed: we need to check BSpec 46255 and recompute ] Signed-off-by:
-
