This function notifies the userspace when the node lost the continuity
of MRP_InTest frames.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch renames the function br_mrp_port_open to
br_mrp_ring_port_open. In this way is more clear that a ring port lost
the continuity because there will be also a br_mrp_in_port_open.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch extends the 'struct br_mrp' to contain information regarding
the MRP interconnect. It contains the following:
- the interconnect port 'i_port', which is NULL if the node doesn't have
  a interconnect role
- the interconnect id, which is similar with the ring id, but this field
  is also part of the MRP_InTest frames.
- the interconnect role, which can be MIM or MIC.
- the interconnect state, which can be open or closed.
- the interconnect delayed_work for sending MRP_InTest frames and check
  for lost of continuity.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds a new flag(BR_MRP_LOST_IN_CONT) to the net bridge
ports. This bit will be set when the port lost the continuity of
MRP_InTest frames.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend the existing MRP netlink attributes to allow to configure MRP
Interconnect:

IFLA_BRIDGE_MRP_IN_ROLE - the parameter type is br_mrp_in_role which
  contains the interconnect id, the ring id, the interconnect role(MIM
  or MIC) and the port ifindex that represents the interconnect port.

IFLA_BRIDGE_MRP_IN_STATE - the parameter type is br_mrp_in_state which
  contains the interconnect id and the interconnect state.

IFLA_BRIDGE_MRP_IN_TEST - the parameter type is br_mrp_start_in_test
  which contains the interconnect id, the interval at which to send
  MRP_InTest frames, how many test frames can be missed before declaring
  the interconnect ring open and the period which represents for how long
  to send MRP_InTest frames.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend switchdev API to add support for MRP interconnect. The HW is
notified in the following cases:

SWITCHDEV_OBJ_ID_IN_ROLE_MRP: This is used when the interconnect role
  of the node changes. The supported roles are MIM and MIC.

SWITCHDEV_OBJ_ID_IN_STATE_MRP: This is used when the interconnect ring
  changes it states to open or closed.

SWITCHDEV_OBJ_ID_IN_TEST_MRP: This is used to start/stop sending
  MRP_InTest frames on all MRP ports. This is called only on nodes that
  have the interconnect role MIM.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
pull-request: bpf-next 2020-07-13

The following pull-request contains BPF updates for your *net-next* tree.

We've added 36 non-merge commits during the last 7 day(s) which contain
a total of 62 files changed, 2242 insertions(+), 468 deletions(-).

The main changes are:

1) Avoid trace_printk warning banner by switching bpf_trace_printk to use
   its own tracing event, from Alan.

2) Better libbpf support on older kernels, from Andrii.

3) Additional AF_XDP stats, from Ciara.

4) build time resolution of BTF IDs, from Jiri.

5) BPF_CGROUP_INET_SOCK_RELEASE hook, from Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below and has been
hand modified to replace GPF_ with a correct flag.
It has been compile tested.

When memory is allocated in 'pcnet32_realloc_tx_ring()' and
'pcnet32_realloc_rx_ring()', GFP_ATOMIC must be used because a spin_lock is
hold.
The call chain is:
   pcnet32_set_ringparam
   ** spin_lock_irqsave(&lp->lock, flags);
   --> pcnet32_realloc_tx_ring
   --> pcnet32_realloc_rx_ring
   ** spin_unlock_irqrestore(&lp->lock, flags);

When memory is in 'pcnet32_probe1()' and 'pcnet32_alloc_ring()', GFP_KERNEL
can be used.

While at it, update a few comments and pr_err messages to be more in line
with the new function names.

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below and has been
hand modified to replace GPF_ with a correct flag.
It has been compile tested.

When memory is allocated in 'amd8111e_init_ring()', GFP_ATOMIC must be used
because a spin_lock is hold.
One of the call chains is:
   amd8111e_open
   ** spin_lock_irq(&lp->lock);
   --> amd8111e_restart
      --> amd8111e_init_ring
   ** spin_unlock_irq(&lp->lock);

The rest of the patch is produced by coccinelle with a few adjustments to
please checkpatch.pl.

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vladimir Oltean says:

====================
New DSA driver for VSC9953 Seville switch

Looking at the Felix and Ocelot drivers, Maxim asked if it would be
possible to use them as a base for a new driver for the Seville switch
inside NXP T1040. Turns out, it is! The result is that the mscc_felix
driver was extended to probe on Seville.

The biggest challenge seems to be getting register read/write API
generic enough to cover such wild bitfield variations between hardware
generations.

Currently, both felix and seville are built under the same kernel config
option (NET_DSA_MSCC_FELIX). This has both some advantages (no need to
duplicate the Lynx PCS code from felix_vsc9959.c) and some disadvantages
(Seville needs to depend on PCI and on ENETC_MDIO). This will be further
refined as time progresses.

The driver has been completely reviewed. Previous submission was here,
it wasn't accepted due to a conflict with Mark Brown's tree, very late
in the release cycle:

https://patchwork.ozlabs.org/project/netdev/cover/20200531122640.1375715-1-olteanv@gmail.com/

So this is more of a repost, with the only changes being related to
rebasing on top of the cleanup I had to do in Ocelot.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There are no non-standard bindings being used. However Felix is a PCI
device and Seville is a platform device. So give an example of device
tree for this switch and document its compatible string.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is another switch from Vitesse / Microsemi / Microchip, that has
10 ports (8 external, 2 internal) and is integrated into the Freescale /
NXP T1040 PowerPC SoC. It is very similar to Felix from NXP LS1028A,
except that this is a platform device and Felix is a PCI device, and it
doesn't support IEEE 1588 and TSN.

Like Felix, this driver configures its own PCS on the internal MDIO bus
using a phy_device abstraction for it (yes, it will be refactored to use
a raw mdio_device, like other phylink drivers do, but let's keep it like
that for now). But unlike Felix, the MDIO bus and the PCS are not from
the same vendor. The PCS is the same QorIQ/Layerscape PCS as found in
Felix/ENETC/DPAA*, but the internal MDIO bus that is used to access it
is actually an instantiation of drivers/net/phy/mdio-mscc-miim.c. But it
would be difficult to reuse that driver (it doesn't even use regmap, and
it's less than 200 lines of code), so we hand-roll here some internal
MDIO bus accessors within seville_vsc9953.c, which serves the purpose of
driving the PCS absolutely fine.

Also, same as Felix, the PCS doesn't support dynamic reconfiguration of
SerDes protocol, so we need to do pre-validation of PHY mode from device
tree and not let phylink change it.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Felix is not actually meant to be a DSA driver only for the switch
inside NXP LS1028A, but an umbrella for all Vitesse / Microsemi /
Microchip switches that are register-compatible with Ocelot and that are
using in DSA mode (with an NPI Ethernet port).

For the dsa_switch_ops exported by the felix driver to be generic enough
to be used by other non-PCI switches, we need to move the PCI-specific
probing to the low-level translation module felix_vsc9959.c. This way,
other switches can have their own probing functions, as platform devices
or otherwise.

This patch also removes the "Felix instance table", which did not stand
the test of time and is unnecessary at this point.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ocelot_wm_encode function deals with setting thresholds for pause
frame start and stop. In Ocelot and Felix the register layout is the
same, but for Seville, it isn't. The easiest way to accommodate Seville
hardware configuration is to introduce a function pointer for setting
this up.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Seville has a different bitwise layout than Ocelot and Felix.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Ocelot switches do not support flow control on Ethernet interfaces
where a DSA tag must be added. If pause frames are enabled, they will be
encapsulated in the DSA tag just like regular frames, and the DSA master
will not recognize them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We don't want ocelot_port_set_maxlen to enable pause frame TX, just to
adjust the pause thresholds.

Move the unconditional enabling of pause TX to ocelot_init_port. There
is no good place to put such setting because it shouldn't be
unconditional. But at the moment it is, we're not changing that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With this patch we try to kill 2 birds with 1 stone.

First of all, some switches that use tag_ocelot.c don't have the exact
same bitfield layout for the DSA tags. The destination ports field is
different for Seville VSC9953 for example. So the choices are to either
duplicate tag_ocelot.c into a new tag_seville.c (sub-optimal) or somehow
take into account a supposed ocelot->dest_ports_offset when packing this
field into the DSA injection header (again not ideal).

Secondly, tag_ocelot.c already needs to memset a 128-bit area to zero
and call some packing() functions of dubious performance in the
fastpath. And most of the values it needs to pack are pretty much
constant (BYPASS=1, SRC_PORT=CPU, DEST=port index). So it would be good
if we could improve that.

The proposed solution is to allocate a memory area per port at probe
time, initialize that with the statically defined bits as per chip
hardware revision, and just perform a simpler memcpy in the fastpath.

Other alternatives have been analyzed, such as:
- Create a separate tag_seville.c: too much code duplication for just 1
  bit field difference.
- Create a separate DSA_TAG_PROTO_SEVILLE under tag_ocelot.c, just like
  tag_brcm.c, which would have a separate .xmit function. Again, too
  much code duplication for just 1 bit field difference.
- Allocate the template from the init function of the tag_ocelot.c
  module, instead of from the driver: couldn't figure out a method of
  accessing the correct port template corresponding to the correct
  tagger in the .xmit function.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently Felix and Ocelot share the same bit layout in these per-port
registers, but Seville does not. So we need reg_fields for that.

Actually since these are per-port registers, we need to also specify the
number of ports, and register size per port, and use the regmap API for
multiple ports.

There's a more subtle point to be made about the other 2 register
fields:
- QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG
- QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE
which we are not writing any longer, for 2 reasons:
- Using the previous API (ocelot_write_rix), we were only writing 1 for
  Felix and Ocelot, which was their hardware-default value, and which
  there wasn't any intention in changing.
- In the case of SCH_NEXT_CFG, in fact Seville does not have this
  register field at all, and therefore, if we want to have common code
  we would be required to not write to it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the register definitions for the MSCC MIIM MDIO controller in
preparation for seville_vsc9959.c to create its accessors for the
internal MDIO bus.

Since we've introduced elements to ocelot_regfields that are not
instantiated by felix and ocelot, we need to define the size of the
regfields arrays explicitly, otherwise ocelot_regfields_init, which
iterates up to REGFIELD_MAX, will fault on the undefined regfield
entries (if we're lucky).
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

At the moment, there are some minimal register differences between
VSC7514 Ocelot and VSC9959 Felix. To be precise, the PCS1G registers are
missing from Felix because it was integrated with an NXP PCS.

But with VSC9953 Seville (not yet introduced), the register differences
are more pronounced.  The MAC registers are located at different offsets
within the DEV_GMII target. So we need to refactor the driver to keep a
regmap even for per-port registers. The callers of the ocelot_port_readl
and ocelot_port_writel were kept unchanged, only the implementation is
now more generic.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Dereferencing the reporter after it was destroyed in order to unlock the
reporters lock results in a use-after-free [1].

Fix this by storing a pointer to the lock in a local variable before
destroying the reporter.

[1]
==================================================================
BUG: KASAN: use-after-free in devlink_health_reporter_destroy+0x15c/0x1b0 net/core/devlink.c:5476
Read of size 8 at addr ffff8880650fd020 by task syz-executor.1/904

CPU: 0 PID: 904 Comm: syz-executor.1 Not tainted 5.8.0-rc2+ #35
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xf6/0x16e lib/dump_stack.c:118
 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383
 __kasan_report mm/kasan/report.c:513 [inline]
 kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
 devlink_health_reporter_destroy+0x15c/0x1b0 net/core/devlink.c:5476
 nsim_dev_health_exit+0x8b/0xe0 drivers/net/netdevsim/health.c:317
 nsim_dev_reload_destroy+0x7f/0x110 drivers/net/netdevsim/dev.c:1134
 nsim_dev_reload_down+0x6e/0xd0 drivers/net/netdevsim/dev.c:712
 devlink_reload+0xc6/0x3b0 net/core/devlink.c:2952
 devlink_nl_cmd_reload+0x2f1/0x7c0 net/core/devlink.c:2987
 genl_family_rcv_msg_doit net/netlink/genetlink.c:691 [inline]
 genl_family_rcv_msg net/netlink/genetlink.c:736 [inline]
 genl_rcv_msg+0x611/0x9d0 net/netlink/genetlink.c:753
 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469
 genl_rcv+0x24/0x40 net/netlink/genetlink.c:764
 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
 netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329
 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg+0x150/0x190 net/socket.c:672
 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2363
 ___sys_sendmsg+0xff/0x170 net/socket.c:2417
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2450
 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x4748ad
Code: Bad RIP value.
RSP: 002b:00007fd0358adc38 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 000000000056bf00 RCX: 00000000004748ad
RDX: 0000000000000000 RSI: 00000000200000c0 RDI: 0000000000000003
RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00000000004d1a4b R14: 00007fd0358ae6b4 R15: 00007fd0358add80

Allocated by task 539:
 save_stack+0x1b/0x40 mm/kasan/common.c:48
 set_track mm/kasan/common.c:56 [inline]
 __kasan_kmalloc mm/kasan/common.c:494 [inline]
 __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467
 kmalloc include/linux/slab.h:555 [inline]
 kzalloc include/linux/slab.h:669 [inline]
 __devlink_health_reporter_create+0x91/0x2f0 net/core/devlink.c:5359
 devlink_health_reporter_create+0xa1/0x170 net/core/devlink.c:5431
 nsim_dev_health_init+0x95/0x3a0 drivers/net/netdevsim/health.c:279
 nsim_dev_probe+0xb1e/0xeb0 drivers/net/netdevsim/dev.c:1086
 really_probe+0x287/0x6d0 drivers/base/dd.c:525
 driver_probe_device+0xfe/0x1d0 drivers/base/dd.c:701
 __device_attach_driver+0x21e/0x290 drivers/base/dd.c:807
 bus_for_each_drv+0x161/0x1e0 drivers/base/bus.c:431
 __device_attach+0x21a/0x360 drivers/base/dd.c:873
 bus_probe_device+0x1e6/0x290 drivers/base/bus.c:491
 device_add+0xaf2/0x1b00 drivers/base/core.c:2680
 nsim_bus_dev_new drivers/net/netdevsim/bus.c:336 [inline]
 new_device_store+0x374/0x590 drivers/net/netdevsim/bus.c:215
 bus_attr_store+0x75/0xa0 drivers/base/bus.c:122
 sysfs_kf_write+0x113/0x170 fs/sysfs/file.c:138
 kernfs_fop_write+0x25d/0x480 fs/kernfs/file.c:315
 __vfs_write+0x7c/0x100 fs/read_write.c:495
 vfs_write+0x265/0x5e0 fs/read_write.c:559
 ksys_write+0x12d/0x250 fs/read_write.c:612
 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Freed by task 904:
 save_stack+0x1b/0x40 mm/kasan/common.c:48
 set_track mm/kasan/common.c:56 [inline]
 kasan_set_free_info mm/kasan/common.c:316 [inline]
 __kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455
 slab_free_hook mm/slub.c:1474 [inline]
 slab_free_freelist_hook mm/slub.c:1507 [inline]
 slab_free mm/slub.c:3072 [inline]
 kfree+0xe6/0x320 mm/slub.c:4063
 devlink_health_reporter_free net/core/devlink.c:5449 [inline]
 devlink_health_reporter_put+0xb7/0xf0 net/core/devlink.c:5456
 __devlink_health_reporter_destroy net/core/devlink.c:5463 [inline]
 devlink_health_reporter_destroy+0x11b/0x1b0 net/core/devlink.c:5475
 nsim_dev_health_exit+0x8b/0xe0 drivers/net/netdevsim/health.c:317
 nsim_dev_reload_destroy+0x7f/0x110 drivers/net/netdevsim/dev.c:1134
 nsim_dev_reload_down+0x6e/0xd0 drivers/net/netdevsim/dev.c:712
 devlink_reload+0xc6/0x3b0 net/core/devlink.c:2952
 devlink_nl_cmd_reload+0x2f1/0x7c0 net/core/devlink.c:2987
 genl_family_rcv_msg_doit net/netlink/genetlink.c:691 [inline]
 genl_family_rcv_msg net/netlink/genetlink.c:736 [inline]
 genl_rcv_msg+0x611/0x9d0 net/netlink/genetlink.c:753
 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469
 genl_rcv+0x24/0x40 net/netlink/genetlink.c:764
 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
 netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329
 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg+0x150/0x190 net/socket.c:672
 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2363
 ___sys_sendmsg+0xff/0x170 net/socket.c:2417
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2450
 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

The buggy address belongs to the object at ffff8880650fd000
 which belongs to the cache kmalloc-512 of size 512
The buggy address is located 32 bytes inside of
 512-byte region [ffff8880650fd000, ffff8880650fd200)
The buggy address belongs to the page:
page:ffffea0001943f00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff8880650ff800 head:ffffea0001943f00 order:2 compound_mapcount:0 compound_pincount:0
flags: 0x100000000010200(slab|head)
raw: 0100000000010200 ffffea0001a06a08 ffffea00010ad308 ffff88806c402500
raw: ffff8880650ff800 0000000000100009 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8880650fcf00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff8880650fcf80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8880650fd000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                               ^
 ffff8880650fd080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8880650fd100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Fixes: 3c5584bf ("devlink: Rework devlink health reporter destructor")
Fixes: 15c724b9 ("devlink: Add devlink health port reporters API")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

PHYLIB is not selected by mdio-mscc-miim but it uses mdio devres helpers.
Explicitly select MDIO_DEVRES in this driver's Kconfig entry.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 1814cff2 ("net: phy: add a Kconfig option for mdio_devres")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The sparse tool complains as follows:

net/core/dev.c:5594:1: warning:
 symbol '__pcpu_scope_flush_works' was not declared. Should it be static?

'flush_works' is not used outside of dev.c, so marks
it static.

Fixes: 41852497 ("net: batch calls to flush_all_backlogs()")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Petr Machata says:

====================
mlxsw: Add support for buffer drops mirroring

This set offloads the recently introduced qevent infrastructure in TC and
allows mlxsw to support mirroring of packets that were dropped due to
buffer related reasons (e.g., early drops) during forwarding.

Up until now mlxsw only supported mirroring that was either triggered by
per-port triggers (i.e., via matchall) or by the policy engine (i.e.,
via flower). Packets that are dropped due to buffer related reasons are
mirrored using a third type of trigger, a global trigger.

Global triggers are bound once to a mirroring (SPAN) agent and enabled
on a per-{port, TC} basis. This allows users, for example, to request
that only packets that were early dropped on a specific netdev to be
mirrored.

Patch set overview:

Patch #1 extends flow_block_offload and indirect offload structure to pass
a scheduler instead of a netdevice. That is necessary, because binding type
and netdevice are not a unique identifier of the block anymore.

Patches #2-#3 add the required registers to support above mentioned
functionality.

Patches #4-#6 gradually add support for global mirroring triggers.

Patch #7 adds support for enablement of global mirroring triggers.

Patches #8-#11 are cleanups in the flow offload code and shuffle some
code around to make the qevent offload easier.

Patch #12 implements offload of RED early_drop qevent.

Patch #13 extends the RED selftest for offloaded datapath to cover
early_drop qevent.

v2:
- Patch #1:
    - In struct flow_block_indr, track both sch and dev.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a selftest for offloading a mirror action attached to the block
associated with RED early_drop qevent.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The RED qevents early_drop and mark can be offloaded under the following
fairly strict conditions:

- At most one filter is configured at the qevent block
- The protocol is "any"
- The classifier is matchall
- The action is trap, sample, or mirror with the same conditions as
  with other SPAN offloads
- The hw_counters type is none

In this patchset, implement offload of mirror for early_drop qevent.
The ECN trigger is currently not implemented in the FW and therefore
the mark qevent is not supported.

The qevent notifications look exactly like regular block binding
notifications with a binder type that identifies them as qevents.
Therefore the details of processing this binding are fairly similar
to the matchall offload.

struct flow_block_offload.sch points at the qdisc in question. Use it to
figure out if the qdisc is offloaded at all and what TC it configures.
Bounce bindings on not-offloaded qdiscs.

Individual bindings are kept in a list so that several qevents can share
the same block and all binding points get configured as the configured
filters change.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Two RED qevents have been introduced recently. From the point of view of a
driver, qevents are simply blocks with unusual binder types. However they
need to be handled by different logic than ACL-like flows.

Thus rename mlxsw_sp_setup_tc_block() to mlxsw_sp_setup_tc_block_clsact()
and move the binder-type dispatch from there to spectrum.c into a new
function of the original name. The new dispatcher is easier to extend with
new binder types.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A following patch introduces offloading of filters attached to blocks bound
to the RED tail_drop qevent. The only classifier that mlxsw will permit in
this role is matchall. mlxsw currently offloads matchall filters used with
clsact qdisc. The data structures used for that offload will come handy for
the qevent offload as well. Publish them in spectrum.h.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The field "dev" in struct mlxsw_sp_flow_block_binding is not used. Drop it.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

No clean-up is performed at the target label of this goto. Convert it to a
direct return.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While the binding of global mirroring triggers to a SPAN agent is
global, packets are only mirrored if they belong to a port and TC on
which the trigger was enabled. This allows, for example, to mirror
packets that were tail-dropped on a specific netdev.

Implement the operations that allow to enable / disable a global
mirroring trigger on a specific port and TC.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Global mirroring triggers are triggers that are only keyed by their
trigger, as opposed to per-port triggers, which are keyed by their
trigger and port.

Such triggers allow mirroring packets that were tail/early dropped or
ECN marked to a SPAN agent.

Implement the previously added trigger operations for these global
triggers. Since such triggers are only supported from Spectrum-2
onwards, have the Spectrum-1 operations return an error.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, a SPAN agent can only be bound to a per-port trigger where
the trigger is either an incoming packet (INGRESS) or an outgoing packet
(EGRESS) to / from the port.

The subsequent patch will introduce the concept of global mirroring
triggers. The binding / unbinding of global triggers is different than
that of per-port triggers. Such triggers also need to be enabled /
disabled on a per-{port, TC} basis and are only supported from
Spectrum-2 onwards.

Add trigger operations that allow us to abstract these differences. Only
implement the operations for per-port triggers. Next patch will
implement the operations for global triggers.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The per-ASIC SPAN operations are relevant to the SPAN module and
therefore should be implemented there and not in the main driver file.
Move them.

These operations will be extended later on.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>