* pci/resource:
  PCI: tegra: Remove PCI_REASSIGN_ALL_BUS use on Tegra
  resource: Set type when reserving new regions
  resource: Set type of "reserve=" user-specified resources
  irqchip/i8259: Set I/O port resource types correctly
  powerpc: Set I/O port resource types correctly
  MIPS: Set I/O port resource types correctly
  vgacon: Set VGA struct resource types
  PCI: Use dev_info() rather than dev_err() for ROM validation
  PCI: Remove PCI_REASSIGN_ALL_RSRC use on arm and arm64
  PCI: Remove sysfs resource mmap warning

Conflicts:
	drivers/pci/rom.c

* pci/msi:
  PCI: Disable MSI for HiSilicon Hip06/Hip07 only in Root Port mode

* pci/misc:
  PCI: Add dummy pci_irqd_intx_xlate() for CONFIG_PCI=n build
  PCI: Add wrappers for dev_printk()
  PCI: Remove unnecessary messages for memory allocation failures
  PCI: Add #defines for Completion Timeout Disable feature
  hinic: Replace PCI pool old API
  net: e100: Replace PCI pool old API
  block: DAC960: Replace PCI pool old API
  MAINTAINERS: Include more PCI files
  PCI: Remove unneeded kallsyms include
  powerpc/pci: Unroll two pass loop when scanning bridges
  powerpc/pci: Use for_each_pci_bridge() helper

* pci/hotplug:
  PCI: pciehp: Assume NoCompl+ for Thunderbolt ports
  PCI: hotplug: Drop checking of PCI_BRIDGE_CONTROL in *_unconfigure_device()

* pci/enumeration:
  RDMA/qedr: Use pci_enable_atomic_ops_to_root()
  PCI: Add pci_enable_atomic_ops_to_root()
  PCI: Make PCI_SCAN_ALL_PCIE_DEVS work for Root as well as Downstream Ports

* pci/dt-resources:
  PCI: Make of_irq_parse_pci() static
  powerpc/pci: Use of_irq_parse_and_map_pci() helper
  PCI: Move OF-related PCI functions into PCI core

* pci/dpc:
  PCI/DPC: Reformat DPC register definitions
  PCI/DPC: Add and use DPC Status register field definitions
  PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error()
  PCI/DPC: Remove unnecessary RP PIO register structs
  PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info()
  PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info()
  PCI/DPC: Make RP PIO log size check more generic
  PCI/DPC: Rename local "status" to "dpc_status"
  PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error()
  PCI/DPC: Process RP PIO details only if RP PIO extensions supported
  PCI/DPC: Read RP PIO Log Size once at probe
  PCI/DPC: Rename struct dpc_dev.rp to rp_extensions
  PCI/DPC: Add local variable for DPC capability offset
  PCI/DPC: Rename interrupt_event_handler() to dpc_work()
  PCI/DPC: Fix interrupt message number print
  PCI/DPC: Enable DPC only if AER is available
  PCI/DPC: Fix shared interrupt handling

* pci/dma:
  PCI: Remove NULL device handling from PCI DMA API
  net: tsi108: Use DMA API properly
  media: ttusb-dec: Remove pci_zalloc_coherent() abuse
  media: ttusb-budget: Remove pci_zalloc_coherent() abuse

* pci/deprecate-get-bus-and-slot:
  video: fbdev: riva: deprecate pci_get_bus_and_slot()
  video: fbdev: nvidia: deprecate pci_get_bus_and_slot()
  video: fbdev: intelfb: deprecate pci_get_bus_and_slot()
  openprom: Deprecate pci_get_bus_and_slot()
  xen/pcifront: Deprecate pci_get_bus_and_slot()
  PCI: Deprecate pci_get_bus_and_slot()
  PCI: ibmphp: Deprecate pci_get_bus_and_slot()
  PCI: cpqhp: Deprecate pci_get_bus_and_slot()
  pch_gbe: Deprecate pci_get_bus_and_slot()
  bnx2x: Deprecate pci_get_bus_and_slot()
  powerpc/via-pmu: Deprecate pci_get_bus_and_slot()
  iommu/amd: Deprecate pci_get_bus_and_slot()
  sl82c105: deprecate pci_get_bus_and_slot()
  drm/nouveau: deprecate pci_get_bus_and_slot()
  drm/gma500: Deprecate pci_get_bus_and_slot()
  ibft: Deprecate pci_get_bus_and_slot()
  edd: Deprecate pci_get_bus_and_slot()
  agp: sworks: Deprecate pci_get_bus_and_slot()
  agp: nvidia: Deprecate pci_get_bus_and_slot()
  ata: Deprecate pci_get_bus_and_slot()
  x86/PCI: Deprecate pci_get_bus_and_slot()
  powerpc/PCI: Deprecate pci_get_bus_and_slot()
  alpha/PCI: Deprecate pci_get_bus_and_slot()

* pci/aspm:
  PCI/ASPM: Unexport internal ASPM interfaces
  PCI/ASPM: Enable Latency Tolerance Reporting when supported
  PCI/ASPM: Calculate LTR_L1.2_THRESHOLD from device characteristics

* pci/aer:
  PCI/AER: Return error if AER is not supported
  PCI/AER: Skip recovery callbacks for correctable errors from ACPI APEI

Reformat DPC register definitions to follow the convention that register
field masks indicate the register width, e.g., a field of a 16-bit register
uses a mask of 4 hex digits, with leading zeros included as needed.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>

Add definitions for DPC Status register fields and use them in the code.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>

dpc_process_rp_pio_error() only calls dpc_rp_pio_get_info(), so squash them
together.  No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>

We read and immediately print the RP PIO log registers.  We don't save
them, so there's no need to define structs for them.  Remove the structs
and read the registers into local variables instead.  No functional change
intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>

Move the dpc->rp_pio_status assignment into dpc_rp_pio_get_info() since
that's where we read rp_pio->status anway.  No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>

Separating dpc_rp_pio_print_error() doesn't really provide any useful
abstraction, so squash it into its caller, dpc_rp_pio_get_info().  No
functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>

In dpc_probe(), we set dpc->rp_log_size to zero if we think the hardware
reports an invalid size.  In this case, we could have dpc->rp_extensions
set but dpc->rp_log_size == 0, and we should print the basic RP PIO
registers but not the variable-size portion.  We already checked for
dpc->rp_log_size < 4 above, so this patch is just for consistency of style.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>

In dpc_rp_pio_get_info() rename the local "status" variable to
"dpc_status".  This is to make room for another variable named "status" in
a subsequent patch.  No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>

Separating dpc_rp_pio_print_tlp_header() doesn't really provide any useful
abstraction, so squash it into its caller, dpc_rp_pio_print_error().  No
functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>

The RP PIO registers (status, mask, severity, etc) are only implemented if
the "RP Extensions for DPC" bit is set in the DPC Capabilities register.

Previously we called dpc_process_rp_pio_error(), which reads and decodes
those RP PIO registers, whenever the DPC Status register indicated an "RP
PIO error" (Trigger Reason == 3 and Trigger Reason Extension == 0).

It does seem reasonable to assume that DPC Status would only indicate an RP
PIO error if the RP extensions are supported, but PCIe r4.0, sec 7.9.15.4,
is actually not explicit about that: it does not say "Trigger Reason
Extension == 0 is valid only for Root Ports that support RP Extensions for
DPC."

Check whether the RP Extensions for DPC are supported before trying to read
the RP PIO registers.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>

The RP PIO Log Size is a read-only field in the DPC Capability, so it is
constant and known at probe-time, but previously we read it every time we
processed an RP PIO error.

Read it once in dpc_probe() (if the RP Extensions for DPC are supported)
and remember the size in struct dpc_dev.  No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>

"rp" is ambiguous: it might mean "this DPC device is a Root Port."  But in
fact, it means "this DPC device is a Root Port *and* it supports a set of
DPC Extensions."

Rename "rp" to "rp_extensions" to make this more clear.  No functional
change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>

Add a local variable for DPC capability offset and replace repeated use of
"dpc->cap_pos" with simply "cap".  No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>

Rename interrupt_event_handler() to dpc_work() so there's more useful
information in stack traces and similar situations.  No functional change
intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>

The interrupt message number is the first 5 bits, but the driver was
masking only the first 4 bits.  Fix that by using the existing
define.
Signed-off-by: Keith Busch <keith.busch@intel.com>
[bhelgaas: remove reformatting (done by another patch)]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

The "Determination of DPC Control" implementation note in PCIe r4.0, sec
6.1.10, recommends the operating system always link DPC control to the
control of AER, as the two functionalities are strongly connected.

To avoid conflicts over whether platform firmware or the OS controls DPC,
enable DPC only if AER is enabled in the OS, and the device's error
handling does not have firmware-first AER handling.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>

Now that the DT PCI code is merged into drivers/pci, of_irq_parse_pci() can
be static.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Frank Rowand <frowand.list@gmail.com>

Use PCI core interface pci_enable_atomic_ops_to_root() to enable atomic
capability.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michal Kalderon <michal.kalderon@cavium.com>
CC: Ram Amrani <Ram.Amrani@cavium.com>
CC: Doug Ledford <dledford@redhat.com>

The Atomic Operations feature (PCIe r4.0, sec 6.15) allows atomic
transctions to be requested by, routed through and completed by PCIe
components. Routing and completion do not require software support.
Component support for each is detectable via the DEVCAP2 register.

A Requester may use AtomicOps only if its PCI_EXP_DEVCTL2_ATOMIC_REQ is
set. This should be set only if the Completer and all intermediate routing
elements support AtomicOps.

A concrete example is the AMD Fiji-class GPU (which is capable of making
AtomicOp requests), below a PLX 8747 switch (advertising AtomicOp routing)
with a Haswell host bridge (advertising AtomicOp completion support).

Add pci_enable_atomic_ops_to_root() for per-device control over AtomicOp
requests. This checks to be sure the Root Port supports completion of the
desired AtomicOp sizes and the path to the Root Port supports routing the
AtomicOps.
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
[bhelgaas: changelog, comments, whitespace]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Certain Thunderbolt 1 controllers claim to support Command Completed events
(value of 0b in the No Command Completed Support field of the Slot
Capabilities register) but in reality they neither set the Command
Completed bit in the Slot Status register nor signal a Command Completed
interrupt:

  8086:1513  CV82524  [Light Ridge 4C  2010]
  8086:151a  DSL2310  [Eagle Ridge 2C  2011]
  8086:151b  CVL2510  [Light Peak 2C   2010]
  8086:1547  DSL3510  [Cactus Ridge 4C 2012]
  8086:1548  DSL3310  [Cactus Ridge 2C 2012]
  8086:1549  DSL2210  [Port Ridge 1C   2011]

All known newer chips (Redwood Ridge and onwards) set No Command Completed
Support, indicating that they do not support Command Completed events.

The user-visible impact is that after unplugging such a device, 2 seconds
elapse until pciehp is unbound.  That's because on ->remove,
pcie_write_cmd() is called via pcie_disable_notification() and every call
to pcie_write_cmd() takes 2 seconds (1 second for each invocation of
pcie_wait_cmd()):

  [  337.942727] pciehp 0000:0a:00.0:pcie204: Timeout on hotplug command 0x1038 (issued 21176 msec ago)
  [  340.014735] pciehp 0000:0a:00.0:pcie204: Timeout on hotplug command 0x0000 (issued 2072 msec ago)

That by itself has always been unpleasant, but the situation has become
worse with commit cc27b735 ("PCI/portdrv: Turn off PCIe services during
shutdown"):  Now pciehp is unbound on ->shutdown.  Because Thunderbolt
controllers typically have 4 hotplug ports, every reboot and shutdown is
now delayed by 8 seconds, plus another 2 seconds for every attached
Thunderbolt 1 device.

Thunderbolt hotplug slots are not physical slots that one inserts cards
into, but rather logical hotplug slots implemented in silicon.  Devices
appear beyond those logical slots once a PCI tunnel is established on top
of the Thunderbolt Converged I/O switch.  One would expect commands written
to the Slot Control register to be executed immediately by the silicon, so
for simplicity we always assume NoCompl+ for Thunderbolt ports.

Fixes: cc27b735 ("PCI/portdrv: Turn off PCIe services during shutdown")
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org	# v4.12+
Cc: Sinan Kaya <okaya@codeaurora.org>
Cc: Yehezkel Bernat <yehezkel.bernat@intel.com>
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: Andreas Noever <andreas.noever@gmail.com>

Some hardware can operate in either "host" or "endpoint" mode, which means
there can be both a host bridge driver and an endpoint driver for the same
device.  Those drivers share a lot of code, so sometimes they live in the
same source file.

The host bridge driver requires CONFIG_PCI=y because it enumerates PCI
devices below the bridge using the PCI core.  The endpoint driver does not
require CONFIG_PCI=y because it runs in an embedded kernel on the other
side of the device, e.g., on an adapter card.

pci-dra7xx.c contains both host and endpoint drivers.  If we select only
the endpoint driver (CONFIG_PCI=n and CONFIG_PCI_DRA7XX_EP=y), the unneeded
host driver is still compiled.  It references pci_irqd_intx_xlate(), which
is not present when CONFIG_PCI=n, which causes this error:

  drivers/pci/dwc/pci-dra7xx.c:229:11: error: 'pci_irqd_intx_xlate' undeclared here (not in a function)

Add a dummy pci_irqd_intx_xlate() for the CONFIG_PCI=n case.

[bhelgaas: changelog]
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Add PCI-specific dev_printk() wrappers and use them to simplify the code
slightly.  No functional change intended.
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
[bhelgaas: squash into one patch]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Historically some ISA drivers used the old PCI DMA API with a NULL pdev
argument, but these days this isn't used and not too useful due to the
per-device DMA ops, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

We need to pass a struct device to the DMA API, even if some architectures
still support that for legacy reasons, and should not mix it with the old
PCI DMA API.

Note that the driver also seems to never actually unmap its DMA mappings,
but to fix that we'll need someone more familar with the driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Switch to a plain kzalloc() instead of pci_zalloc_coherent() to allocate
memory for the USB DMA.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Switch to a plain kzalloc() instead of pci_zalloc_coherent() to allocate
memory for the USB DMA.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Instead of calling both of_irq_parse_pci() and irq_create_of_mapping(),
call of_irq_parse_and_map_pci(), which does the same thing. This will allow
making of_irq_parse_pci() a private, static function.

This changes the logic slightly in that the fallback path will also be
taken if irq_create_of_mapping() fails internally.
Signed-off-by: Rob Herring <robh@kernel.org>
[bhelgaas: fold in virq init from Stephen Rothwell <sfr@canb.auug.org.au>]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>

Following what has been done for other subsystems, move the remaining PCI
related code out of drivers/of/ and into drivers/pci/of.c

With this, we can kill a few kconfig symbols.
Signed-off-by: Rob Herring <robh@kernel.org>
[bhelgaas: minor whitespace, comment cleanups]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Frank Rowand <frowand.list@gmail.com>

Per ebfdc409 ("checkpatch: attempt to find unnecessary 'out of memory'
messages"), when a memory allocation fails, the memory subsystem emits
generic "out of memory" messages (see slab_out_of_memory() for some of this
logging).  Therefore, additional error messages in the caller don't add
much value.

Remove messages that merely report "out of memory".

This preserves some messages that report additional information, e.g.,
allocation failures that mean we drop hotplug events.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
[bhelgaas: changelog, squash patches, make similar changes to acpiphp,
cpqphp, ibmphp, keep warning when dropping hotplug event]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>