- 17 Sep, 2018 2 commits
-
-
Kalle Valo authored
Solve the conflict in main.c early on as there will be a lot more mt76 patches in the queue.
-
Stanislaw Gruszka authored
We wrongly use wcid_mask instead of vif_mask. This creates problems when the interface is removed more than 8 times, for example with iw: iw dev <devname> interface add <name> type <type> iw dev <name> del This caused 'ifconfig up' to fail with error: SIOCSIFFLAGS: No space left on device Fixes: 95e44409 ("mt76x0: main file") Reported-and-tested-by:
Sid Hayn <sidhayn@gmail.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
- 04 Sep, 2018 38 commits
-
-
Gustavo A. R. Silva authored
Replace "fall though" with a proper "fall through" annotation. This fix is part of the ongoing efforts to enabling -Wimplicit-fallthrough Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Kevin Lo authored
Remove set but unused variables from _rtl88ee_hw_configure() and _rtl8723e_hw_configure(). Signed-off-by:
Kevin Lo <kevlo@kevlo.org> Acked-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/rsi/rsi_91x_hal.c: In function 'rsi_send_data_pkt': drivers/net/wireless/rsi/rsi_91x_hal.c:288:5: warning: variable 'header_size' set but not used [-Wunused-but-set-variable] 'tx_params' only used for 'header_size' dereferenced,so also can be removed. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Igor Stoppa authored
Both WARN_ON() and WARN_ON_ONCE() already contain unlikely(). Signed-off-by:
Igor Stoppa <igor.stoppa@huawei.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Christian Lamparter <chunkeey@googlemail.com> Cc: Michal Kazior <michal.kazior@tieto.com> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Cc: Linux Wireless Mailing List <linux-wireless@vger.kernel.org> Signed-off-by:
-
Aleksei Mamlin authored
The Realtek rtl8188ctv (0x0bda:0x018a) is a highly integrated single-chip WLAN USB2.0 network interface controller. Currently rtl8188ctv is supported by rtlwifi driver. It is similar to the rtl8188cus(0x0bda:0x818a) and uses the same config. Signed-off-by:
Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by:
-
Kristian Evensen authored
Enable the use of CQM_RSSI_LIST with mt76-devices. The change has been tested with the mt7602, mt7603 and mt7621 PCI wifi-cards. I passed a list of RSSI thresholds to the driver, and when disconnecting/connecting the antenna(s) I got an event each time the RSSI went above/below a threshold. While I have not been able to test the change with any of the mt76 USB-devices (no access to a device), the RX RSSI management code is shared between the two device types. Thus, CQM should also work with the mt76 USB-devices. Signed-off-by:
Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by:
-
Lorenzo Bianconi authored
Remove the following unused routines for usb buffer allocation/free/submit: - mt76x0_usb_alloc_buf - mt76x0_usb_free_buf - mt76x0_usb_submit_buf Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
-
Lorenzo Bianconi authored
Use mt76u_mcu_fw_send_data utility routine for firmware uploading and remove unused __mt76x0_dma_fw/mt76x0_dma_fw functions Signed-off-by:
-
Lorenzo Bianconi authored
Remove no longer used mt76x0_mcu data structure Signed-off-by:
-
Lorenzo Bianconi authored
Use mt76u_mcu_send_msg/__mt76u_mcu_send_msg utility routines to send commands to usb mcu. Remove following unused routines: - mt76x0_mcu_wait_resp - __mt76x0_mcu_msg_send - mt76x0_mcu_msg_send - mt76x0_dma_skb_wrap_cmd - trace_mt_mcu_msg_send_cs - mt76x0_mcu_cmd_deinit Signed-off-by:
-
Lorenzo Bianconi authored
Delete core.c source file since, removing mt76x0_wait_asic_ready routine, it is no longer needed Signed-off-by:
-
Lorenzo Bianconi authored
Remove mt76x0_vendor_request routine and use mt76u_vendor_request utility function from mt76-usb layer in mt76x0_upload_firmware Signed-off-by:
-
Lorenzo Bianconi authored
Remove mt76x0_complete_urb routine and use mt76u_mcu_complete_urb utility function as usb mcu completion handler Signed-off-by:
-
Lorenzo Bianconi authored
Use mt76 usb shared completion data structure in mt76x0_mcu_wait_resp routine and remove mt76x0 private one Signed-off-by:
-
Lorenzo Bianconi authored
Remove mt76x0_mcu_msg_alloc duplicated routine and use mt76u_mcu_msg_alloc utility function for usb mcu message allocation Signed-off-by:
-
Lorenzo Bianconi authored
Remove mt76x0_vendor_single_wr routine and use mt76u_single_wr utility function for mcu firmware loading Signed-off-by:
-
Lorenzo Bianconi authored
Remove mt76x0_vendor_reset duplicated routine and use mt76u_mcu_fw_reset utility function for mcu fw reset Signed-off-by:
-
Lorenzo Bianconi authored
Use mt76u_init utility routine for usb initialization. Moreover remove following unused routines: - mt76x0_rr - mt76x0_wr - mt76x0_rmw - mt76x0_wr_copy - mt76x0_assign_pipes Signed-off-by:
-
Lorenzo Bianconi authored
Introduce multiple regs read support to mcu layer in mt76-usb module. Multiple regs read will be reused by mt76x0 driver in usb mcu layer unification between mt76x0 and mt76x2u drivers Signed-off-by:
-
Lorenzo Bianconi authored
Move mt76x2u_mcu_deinit routine in usb_mcu layer in order to be reused by mt76x0 driver in usb mcu layer unification between mt76x0 and mt76x2u drivers Signed-off-by:
-
Lorenzo Bianconi authored
Split __mt76u_mcu_send_msg and mt76u_mcu_send_msg in order to be reused by mt76x0 driver in usb mcu layer unification between mt76x0 and mt76x2u drivers Signed-off-by:
-
Lorenzo Bianconi authored
Move common definition of mt76_reg_pair in mt76.h and remove duplicated code in mt76x2_init_common.c Signed-off-by:
-
Stanislaw Gruszka authored
Use common mt76x02_sta and mt76x02_tx_status structures in mt76x0 sub-driver. Signed-off-by:
-
Stanislaw Gruszka authored
Signed-off-by:
-
Stanislaw Gruszka authored
Second part of unifying mt76x02_sta structure between mt76x0 and mt76x2. Signed-off-by:
-
Stanislaw Gruszka authored
First part of unifying mt76x02_sta structure between mt76x0 and mt76x2. Signed-off-by:
-
Stanislaw Gruszka authored
Private vif structures definitions are the same for mt76x2 and mt76x0. Signed-off-by:
-
Stanislaw Gruszka authored
Use helper from util instead of custom code. Signed-off-by:
-
Stanislaw Gruszka authored
Move mt76x02_mac_wcid_set_drop to common code and use it in mt76x0. Signed-off-by:
-
Stanislaw Gruszka authored
Merge mt76x{0,2}_mac_wcid_setup into common code. Signed-off-by: -
Stanislaw Gruszka authored
Merge mt76x{0,2}_mac_wcid_set_key into common code. Signed-off-by: -
Stanislaw Gruszka authored
Merge mt76x{0,2} mac_shared_key_setup into common code. Signed-off-by: -
Stanislaw Gruszka authored
Add helpers for register access from common code. Signed-off-by:
-
Stanislaw Gruszka authored
Merge mt76x{0,2} mac_get_key_info into new mt76x02_mac.c file. Signed-off-by: -
Stanislaw Gruszka authored
Move rxfilter and mutex to common structure. Create mt76x02-lib.ko for mt76x0 and mt76x2 common functions and create new unified mt76x02_configure_filter() function there. Signed-off-by:
-
Stanislaw Gruszka authored
Add missed definitions for mt76x0 into mt76x02_regs.h. Remove mt76x0/regs.h and fixup mt76x0 code to adjust to some diffrent registers/fields names. Signed-off-by:
-
Stanislaw Gruszka authored
MAC registers are the same for mt76x0 and mt76x2. Rename mt76x2_regs.h file to reflect that. Signed-off-by:
-
Stanislaw Gruszka authored
Create new mt76x02_mac.h for common mac functions of mt76x0 and mt76x2 and unity wait_for_mac for both drivers. Signed-off-by:
-
