into kroah.com:/home/greg/linux/BK/gregkh-2.6

From mru@users.sourceforge.net

My Netgear FA120 USB2 ethernet adaptor isn't working properly with
Linux 2.6.0-test1.  First off, I had to modify it slightly (patch
below) to make it work at all with USB2.  Now I can send data at the
full expected speed (~11 MB/s).

From mru@users.sourceforge.net

This trivial Makefile patch causes the AX8817x driver to actually be
built.

The recent change made to the irq handling in hcd_endpoint_disable()
caused a problem.  The statement

	local_irq_save (flags);

needs to be outside the rescan loop.  Otherwise, on loop iterations after
the first, flags is always set to indicate that interrupts are disabled.

In fact, since the routine ends with might_sleep() anyway, I don't see any
reason to save the interrupt state at all.  My patch just disables
interrupts at the start and enables them at the end.  I'm not sure that's
how you intended it to work, so you may want to change it a little.

There are two places where the audio driver checks for
endpoint-less interfaces, but the second one doesn't
filter out a garbage warning (without this patch).

Likely it'd be better to remove these warnings from
the driver, and maybe just place them in usbcore if
they'd ever be useful.  But this at least gets rid
of one class of "is this device broken" questions.

This patch makes the shuttle_usbat subdriver use proper DMA I/O buffering.
Although I try to be careful with these changes, I can't test them.  So I
urge you to read through it carefully to verify that nothing seems to be
wrong.

Also set usb_device.dev.release right after initialization to catch any
early devices being destroyed.  I still think there's a few error paths
to correct, but this catches a lot of previous errors.

Added a release callback, as is required, otherwise we can easily oops
if a user grabs a sysfs file and the device is removed from the system.

also detach the threads.

Otherwise we'll leave them around as zombies, waiting for them
to be picked up by their parent. Which might be the execve()
thread itself, causing a deadlock.

Noted by Sean Estabrooks:

There is a bug in "ll_rw_blk.c" handling partial bvec submissions.
For whatever reason the floppy driver was triggering it more than
other users (most likely because most other devices tend to be able
to always complete a full request in one go).

Fixed by updating the proper bio vector index entry.

Add kconfig options to allow excluding either or both the I/O
schedulers.  This can be useful for embedded systems (saves about ~13KB).

All schedulers are enabled by default for non-embedded.

This updates the valkyriefb driver to the new API.

From Paul Mackerras <paulus@samba.org>:

 "It compiles OK, but I haven't been able to test it.  I have simplified
  the driver quite a bit using the knowledge that there can only ever be
  one valkyrie graphics adaptor in a system - it is the built-in
  graphics adaptor on various ancient mac and powermac machines, and we
  access it at a hard-coded address, so we can only handle one."

Documentation/nmi-watchdoc.txt doesn't actually tell what options need to be
enabled in kernel config in order to use NMI watchdog. I for one found it
confusing.

Rename ariadne2 to zorro8390, since this driver supports several NS8390-based
Zorro Ethernet cards. Kill all never used occurrencies of CONFIG_NE2K_ZORRO.

m68k cache updates (from Roman Zippel):
  - Uninline flush_icache_range()
  - Add virt_to_phys_slow() which handles vmalloc()ed space

M68k: Use genrtc on all m68k platforms

M68k: Allow ALLOWINT to be used with other types than short (fixes a problem
with irqs_disabled(), from Roman Zippel)

dmasound: Implement missing SOUND_PCM_READ_RATE ioctl (from Richard Zidlicky)

MIPS: Show the correct logo on DEC and SGI machines.

M68k FPU emulator: Add fgetman, fgetexp and fsqrt (from Michael Müller and
Roman Zippel)

M68k: A few missing updates to the new irq API:
  - Q40/Q60 keyboard
  - Q40/Q60 floppy
  - Sun-3x floppy

m68k page updates (from Roman Zippel):
  - Set _PAGE_RONLY bit and clear _PAGE_PRESENT to mark PAGE_NONE pte entries
    (this also makes PAGE_NONE fixup unnecessary)
  - Move _PAGE_FILE to a lower, so pte_to_pgoff/pgoff_to_pte becomes simpler

NCR53C9x: Remove unused initialization of SCp.have_data_in (from Maciej W.
Rozycki). This affects the following drivers:
  - DECstation SCSI
  - Amiga Oktagon SCSI

Macfb compile fixes

M68k: Add missing include for IPV6

M68k: Update for changed do_fork() semantics in 2.5.70

M68k: Fix SCSI breakage introduced in 2.5.74 by not including
<asm-generic/dma-mapping.h>, unless PCI is available.

M68k: show_stack() portability and cleanup patch:
  - Add a task pointer argument to show_stack() and pass NULL as the first
    argument where needed
  - Remove show_trace_task()

Sun-3 SCSI: Kill a warning about a nonmatching prototype after recent SCSI
proc_info() changes.

lmc_proto.c includes <asm/smp.h>, causing build failures on UMP-only
architectures

Atari ksyms: Kill obsolete symbol exports