- 05 Aug, 2010 40 commits
-
-
Uwe Kleine-König authored
This makes the two similar functions platform_device_register_simple and platform_device_register_data one line inline functions using a new generic function platform_device_register_resndata. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Uwe Kleine-König authored
This makes platform_device_add_resources look like platform_device_add_data. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Dmitry Torokhov authored
Both these structures have the same lifetime rules so instead of allocating and managing them separately embed struct device into struct firmware_priv. Also make sure to delete sysfs attributes ourselves instead of expecting sysfs to clean up our mess. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Dmitry Torokhov authored
There is no reason why we are using a template for binary attribute and copying it into per-firmware data before registering. Using the original works as well. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jean Delvare authored
There is little rationale for marking bus_for_each_drv() __must_check. It is more of an iteration helper than a real function. You don't know in advance which callback it will be used on, so you have no clue how important it can be to check the returned value. In practice, this helper function can be used for best-effort tasks. As a matter of fact, bus_for_each_dev() is not marked __must_check. So remove it from bus_for_each_drv() as well. This is the same that was done back in October 2006 by Russell King for device_for_each_child(), for exactly the same reasons. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Marin Mitov authored
struct dma_coherent_mem in drivers/base/dma-coherent.c has member 'device_base' that is of type u32, but is assigned value of type dma_addr_t, which may be 64 bits for x86_64. Change the type to dma_addr_t. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Ian Abbott authored
The kernel/hotplug sysctl variable (/proc/sys/kernel/hotplug file) was made conditional on CONFIG_NET by commit f743ca5e (applied in 2.6.18) to fix problems with undefined references in 2.6.16 when CONFIG_HOTPLUG=y && !CONFIG_NET, but this restriction is no longer needed. This patch makes the kernel/hotplug sysctl variable depend only on CONFIG_HOTPLUG. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Acked-by: Randy Dunlap <randy.dunlap@oracle.COM> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Hans J. Koch authored
Remove IRQF_DISABLED since it is deprecated and a no-op in the current kernel. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Hans J. Koch authored
Remove IRQF_DISABLED since it is deprecated and a no-op in the current kernel. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Acked-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Hans J. Koch authored
Remove IRQF_DISABLED flag since it is deprecated and a no-op in the current kernel. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (79 commits) powerpc/8xx: Add support for the MPC8xx based boards from TQC powerpc/85xx: Introduce support for the Freescale P1022DS reference board powerpc/85xx: Adding DTS for the STx GP3-SSA MPC8555 board powerpc/85xx: Change deprecated binding for 85xx-based boards powerpc/tqm85xx: add a quirk for ti1520 PCMCIA bridge powerpc/tqm85xx: update PCI interrupt-map attribute powerpc/mpc8308rdb: support for MPC8308RDB board from Freescale powerpc/fsl_pci: add quirk for mpc8308 pcie bridge powerpc/85xx: Cleanup QE initialization for MPC85xxMDS boards powerpc/85xx: Fix booting for P1021MDS boards powerpc/85xx: Fix SWIOTLB initalization for MPC85xxMDS boards powerpc/85xx: kexec for SMP 85xx BookE systems powerpc/5200/i2c: improve i2c bus error recovery of/xilinxfb: update tft compatible versions powerpc/fsl-diu-fb: Support setting display mode using EDID powerpc/5121: doc/dts-bindings: update doc of FSL DIU bindings powerpc/5121: shared DIU framebuffer support powerpc/5121: move fsl-diu-fb.h to include/linux powerpc/5121: fsl-diu-fb: fix issue with re-enabling DIU area descriptor powerpc/512x: add clock structure for Video-IN (VIU) unit ...
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (49 commits) microblaze: Add KGDB support microblaze: Support brki rX, 0x18 for user application debugging microblaze: Remove nop after MSRCLR/SET, MTS, MFS instructions microblaze: Simplify syscall rutine microblaze: Move PT_MODE saving to delay slot microblaze: Fix _interrupt function microblaze: Fix _user_exception function microblaze: Put together addik instructions microblaze: Use delay slot in syscall macros microblaze: Save kernel mode in delay slot microblaze: Do not mix register saving and mode setting microblaze: Move SAVE_STATE upward microblaze: entry.S: Macro optimization microblaze: Optimize hw exception rutine microblaze: Implement clear_ums macro and fix SAVE_STATE macro microblaze: Remove additional setup for kernel_mode microblaze: Optimize SAVE_STATE macro microblaze: Remove additional loading microblaze: Completely remove working with R11 register microblaze: Do not setup BIP in _debug_exception ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: arch/sparc/mm: Use GFP_KERNEL MAINTAINERS: Add trailing slash to SBUS path. sbus: autoconvert trivial BKL users to private mutex
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] increase ia64 static per cpu area [IA64] Put ia64 config files on the Uwe Kleine-König diet [IA64] perfmon: convert to unlocked_ioctl [IA64] beautify vmlinux.lds.h
-
git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (150 commits) MIPS: PowerTV: Separate PowerTV USB support from non-USB code MIPS: strip the un-needed sections of vmlinuz MIPS: Clean up the calculation of VMLINUZ_LOAD_ADDRESS MIPS: Clean up arch/mips/boot/compressed/decompress.c MIPS: Clean up arch/mips/boot/compressed/ld.script MIPS: Unify the suffix of compressed vmlinux.bin MIPS: PowerTV: Add Gaia platform definitions. MIPS: BCM47xx: Fix nvram_getenv return value. MIPS: Octeon: Allow more than 3.75GB of memory with PCIe MIPS: Clean up notify_die() usage. MIPS: Remove unused task_struct.trap_no field. Documentation: Mention that KProbes is supported on MIPS SAMPLES: kprobe_example: Make it print something on MIPS. MIPS: kprobe: Add support. MIPS: Add instrunction format for BREAK and SYSCALL MIPS: kprobes: Define regs_return_value() MIPS: Ritually kill stupid printk. MIPS: Octeon: Disallow MSI-X interrupt and fall back to MSI interrupts. MIPS: Octeon: Support 256 MSI on PCIe MIPS: Decode core number for R2 CPUs. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6: xtensa: Disable PCI and nfsroot on simulation target xtensa: Add missing include in coprocessor.h xtensa: Fix the network driver for the simulator target xtensa: Shuffle include statements to fix linker script xtensa: Add -mforce-no-pic option is supported xtensa: Fixes due to bss boundary symbol name changes. xtensa: Fix linker script patch-up xtensa: Fix FLUSH_DCACHE macro for some variants.
-
Nick Piggin authored
Signed-off-by: Nick Piggin <npiggin@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David VomLehn authored
Separate USB code into a file separate from asic/asic_devices. Separating the USB code from everything else in asic/asic_devices.c goes a long way toward reducing the use of that file as a dumping ground for everything that didn't seem to fit anywhere else. Signed-off-by: David VomLehn <dvomlehn@cisco.com> To: linux-mips@linux-mips.org Cc: greg@kroah.com Cc: linux-usb@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/1522/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Wu Zhangjin authored
This patch use "strip -s" to strip the .symtab and .strtab sections of vmlinuz. Note: This patch is based on http://patchwork.linux-mips.org/patch/1324/Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1383/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Wu Zhangjin authored
We have calculated VMLINUZ_LOAD_ADDRESS in shell, which is indecipherable. This patch rewrites it in C. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> To: linux-mips <linux-mips@linux-mips.org> Cc: Alexander Clouter <alex@digriz.org.uk> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Alexander Clouter <alex@digriz.org.uk> Patchwork: https://patchwork.linux-mips.org/patch/1324/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Wu Zhangjin authored
- Remove several outdated comments - Clearify the definition of zimage_start and zimage_size and the their usage Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1382/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Wu Zhangjin authored
- Remove unused symbols: _fdata, _text; only _edata and _end are needed by head.S - Remove unused sections: .sbss, .stab, .gptab.sdata, .gptab.sbss - Change the alignment to 16 bytes to ensure it is greater than any fundamental type of a MIPS compiler. - Clean up comments Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1381/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Wu Zhangjin authored
The compressed vmlinux.bin is only a temp file so it's ok to use the same suffix .z for them (.gz,.lzo,.lzma...) to remove several lines and simpify the maintenance (no need to add the "suffix_$(xxx) := suffix" line). Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> To: linux-mips <linux-mips@linux-mips.org> Cc: Alexander Clouter <alex@digriz.org.uk> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Patchwork: https://patchwork.linux-mips.org/patch/1323/Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
-
David VomLehn authored
Define ASIC address, memory preallocations, and initialization code for the Gaia platform. Signed-off-by: David VomLehn <dvomlehn@cisco.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1519/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Hauke Mehrtens authored
Nvram_getenv should behave like cfe_getenv. cfe_getenv returns 0 on success and -9 if the value was not found. If the input was wrong -8 will be returned by cfe_getenv. Change nvram_getenv to do the same. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: Waldemar Brodkorb <wbx@openadk.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1520/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
David Daney authored
We reserve the 3.75GB - 4GB region of PCIe address space for device to device transfers, making the corresponding physical memory under direct mapping unavailable for DMA. To allow for PCIe DMA to all physical memory we map this chunk of physical memory with BAR1. Because of the resulting discontinuity in the mapping function, we remove a page of memory at each end of the range so multi-page DMA buffers can never be allocated that span the range. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1535/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
David Daney authored
The sixth argument of notify_die() is a signal number, the fifth is a trap number. Instead of passing a signal number in a randomly selected argument, pass it in the sixth. Extract the exception code from regs and pass that as the trap number. Get rid of redundant cast, and remove some gratuitous spaces. Nobody actually does anything with the signal number or trap number, but we might as well populate them with sensible values. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1532/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
David Daney authored
It is initialized to zero and only ever read. Remove it, and pass zero in its place. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1531/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
David Daney authored
MIPS now has KProbes support, so kprobes.txt should reflect it. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: ananth@in.ibm.com To: anil.s.keshavamurthy@intel.com To: davem@davemloft.net To: masami.hiramatsu.pt@hitachi.com Cc: linux-kernel@vger.kernel.org Cc: hschauhan@nulltrace.org Patchwork: https://patchwork.linux-mips.org/patch/1527/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
David Daney authored
This KProbes example is a little useless if it doesn't print anything. For MIPS print similar messages to those produced on x86 and PPC. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: ananth@in.ibm.com To: anil.s.keshavamurthy@intel.com To: davem@davemloft.net To: masami.hiramatsu.pt@hitachi.com Cc: linux-kernel@vger.kernel.org Cc: hschauhan@nulltrace.org Patchwork: https://patchwork.linux-mips.org/patch/1528/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
David Daney authored
This patch is based on previous work by Sony and Himanshu Chauhan. I have done some cleanup and implemented JProbes and KRETPROBES. The KRETPROBES part is pretty much copied verbatim from powerpc. A possible future enhance might be to factor out the common code. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: Himanshu Chauhan <hschauhan@nulltrace.org> To: linux-mips@linux-mips.org To: ananth@in.ibm.com, To: anil.s.keshavamurthy@intel.com To: davem@davemloft.net To: masami.hiramatsu.pt@hitachi.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1525/ Patchwork: https://patchwork.linux-mips.org/patch/1530/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
David Daney authored
Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: ananth@in.ibm.com To: anil.s.keshavamurthy@intel.com To: davem@davemloft.net To: masami.hiramatsu.pt@hitachi.com Cc: linux-kernel@vger.kernel.org Cc: hschauhan@nulltrace.org Patchwork: https://patchwork.linux-mips.org/patch/1524/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
David Daney authored
Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: ananth@in.ibm.com To: anil.s.keshavamurthy@intel.com To: davem@davemloft.net To: masami.hiramatsu.pt@hitachi.com Cc: linux-kernel@vger.kernel.org, Cc: hschauhan@nulltrace.org Patchwork: https://patchwork.linux-mips.org/patch/1529/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
This belongs into userland. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Chandrakala Chavva authored
MSI-X interrupts are not supported yet for Octeon, return error if MSI-X interrupts are requested by driver so that the driver will fall back to use MSI interrupts. Signed-off-by: Chandrakala Chavva <cchavva@caviumnetworks.com> To: linux-mips@linux-mips.org Cc: David Daney <ddaney@caviumnetworks.com> Patchwork: https://patchwork.linux-mips.org/patch/1506/Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David Daney <ddaney@caviumnetworks.com>
-
David Daney authored
Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1507/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
David Daney authored
The struct cpuinfo_mips.core field should be populated with the physical core number. For R2 CPUs, this is carried in the low 10 bits of Ebase. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1505/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Kulikov Vasiliy authored
While at it, drop 0x prefix. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> To: kernel-janitors@vger.kernel.org Cc: Chris Dearman <chris@mips.com> Cc: "Robert P. J. Day" <rpjday@crashcourse.ca> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: André Goddard Rosa <andre.goddard@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1458/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Wu Zhangjin authored
LOONGSON2_PERFCNT_IRQ is used for the irq number of the performance overflow interrupts; LOONGSON_PERFCNT_IRQ is unused so remove it. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1494/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Wu Zhangjin authored
On FuLoong-2F IP6 is shared by the performance counter overflow interrupt and the Bonito northbridge interrupt. To reduce overhead only call do_IRQ() when oprofile is enabled to reduce overhead. This patch adds an inline function do_perfcnt_IRQ() to hide the #if's , which can be shared by the other Loongson machines, i.e. gdium. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1492/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-