- 14 Jul, 2010 10 commits
-
-
Sucheta Chakraborty authored
Pci error recovery support added. Signed-off-by:
Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by:
Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amit Kumar Salecha authored
netdev notifier are not unregistered if pci_register_driver fails. Signed-off-by:
-
Amit Kumar Salecha authored
Disable tx timeout recovery, if auto_fw_reset is disable Signed-off-by:
-
Rajesh Borundia authored
Turning off rx pause param and autoneg param is not supported so return error in that case. Signed-off-by:
Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by:
-
Christoph Egger authored
ETRAX_NETWORK_RED_ON_NO_CONNECTION doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by:
Christoph Egger <siccegge@cs.fau.de> Signed-off-by:
-
Christoph Egger authored
SH_HICOSH4 doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by:
-
Christoph Egger authored
CASSINI_NAPI doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by:
-
Christoph Egger authored
CASSINI_MULTICAST_REG_WRITE doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by:
-
Christoph Egger authored
CASSINI_QGE_DEBUG doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by:
-
Christoph Egger authored
{AR,WAVE}LAN doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by:
-
- 13 Jul, 2010 26 commits
-
-
David S. Miller authored
Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
-
David S. Miller authored
This reverts commit b31fb868. pcim_*() managed drivers do not need explicit resource releasing like this. Signed-off-by:
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/wl12xx/wl1271_cmd.h
-
-
David J. Choi authored
Body of the explanation: -support 16bit and 32bit bus width. -add device reset for ks8842/8841 Micrel device. -set 100Mbps as a default for Micrel device. -set MAC address in both MAC/Switch layer with different sequence for Micrel device, as mentioned in data sheet. -use private data to set options both 16/32bit bus width and Micrel device/ Timberdale(FPGA). -update Kconfig in order to put more information about ks8842 device. Signed-off-by:David J. Choi <david.choi@micrel.com> Signed-off-by:
-
Filip Aben authored
This patch removes the driver version from the driver. This version hasn't changed since the driver's inclusion in the kernel and is a source of confusion for some customers. Signed-off-by:
Filip Aben <f.aben@option.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
chas williams - CONTRACTOR authored
Signed-off-by:
Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by:
-
Baruch Siach authored
With the move to phylib (commit e6b043d5) I was seeing sporadic "MDIO write timeout" messages. Measure of the actual time spent showed latency times of more than 1600us. This patch uses the MII event indication of the FEC hardware to detect completion of MDIO transactions. Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
-
Arnd Bergmann authored
All these files use the big kernel lock in a trivial way to serialize their private file operations, typically resulting from an earlier semi-automatic pushdown from VFS. None of these drivers appears to want to lock against other code, and they all use the BKL as the top-level lock in their file operations, meaning that there is no lock-order inversion problem. Consequently, we can remove the BKL completely, replacing it with a per-file mutex in every case. Using a scripted approach means we can avoid typos. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by:Arnd Bergmann <arnd@arndb.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by:
-
Arnd Bergmann authored
All these files use the big kernel lock in a trivial way to serialize their private file operations, typically resulting from an earlier semi-automatic pushdown from VFS. None of these drivers appears to want to lock against other code, and they all use the BKL as the top-level lock in their file operations, meaning that there is no lock-order inversion problem. Consequently, we can remove the BKL completely, replacing it with a per-file mutex in every case. Using a scripted approach means we can avoid typos. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: -
Eric Dumazet authored
Avoid two extra instructions in sock_free(), to reload skb->truesize and skb->sk Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Changli Gao authored
a new boolean flag no_autobind is added to structure proto to avoid the autobind calls when the protocol is TCP. Then sock_rps_record_flow() is called int the TCP's sendmsg() and sendpage() pathes. Signed-off-by:
Changli Gao <xiaosuo@gmail.com> ---- include/net/inet_common.h | 4 ++++ include/net/sock.h | 1 + include/net/tcp.h | 8 ++++---- net/ipv4/af_inet.c | 15 +++++++++------ net/ipv4/tcp.c | 11 +++++------ net/ipv4/tcp_ipv4.c | 3 +++ net/ipv6/af_inet6.c | 8 ++++---- net/ipv6/tcp_ipv6.c | 3 +++ 8 files changed, 33 insertions(+), 20 deletions(-) Signed-off-by:
-
Changli Gao authored
remove useless blanks. Signed-off-by:
-
Kulikov Vasiliy authored
xtsonic_open() doesn't check sonic_open() return code. If it is error we must free requested IRQ. Signed-off-by:
Kulikov Vasiliy <segooon@gmail.com> Signed-off-by:
-
Kulikov Vasiliy authored
macsonic_open() doesn't check sonic_open() return code. If it is error we must free requested IRQs. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Kulikov Vasiliy authored
jazzsonic_open() doesn't check sonic_open() return code. If it is error we must free requested IRQ. Signed-off-by:
-
Dan Carpenter authored
There was a missing "else" statement so the original code overflowed if ->master->name was too long. Also the ->slave and ->master buffers can hold names with 9 characters and a NULL so I cleaned it up to allow another character. Signed-off-by:
-
Dan Carpenter authored
This is an off by one bug because strlen() doesn't count the NULL terminator. We strcpy() addr into a fixed length array of size UNIX_PATH_MAX later on. The addr variable is the name of the device being mounted. CC: stable@kernel.org Signed-off-by:
-
Kulikov Vasiliy authored
If tc35815_init_one() fails we must unmap mapped regions. Signed-off-by:
-
Denis Kirjanov authored
Fix missing validate_addr hook Signed-off-by:
Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by:
-
Casey Leedom authored
Fix up TX Queue Host Flow Control to cause an Egress Queue Status Update to be generated when we run out of TX Queue Descriptors. This will, in turn, allow us to restart a stopped TX Queue. Signed-off-by:
Casey Leedom <leedom@chelsio.com> Signed-off-by:
-
Kulikov Vasiliy authored
Since some of xxx_register_driver() can return error we must unregister already registered drivers. Signed-off-by:
-
- 12 Jul, 2010 4 commits
-
-
Christian Lamparter authored
Michael has been out of the scene for a while now, but despite Michael's absence, p54 is still maintained. Cc: Michael Wu <aluminum.tape@gmail.com> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
AR5008+ and AR9003 currently use two separate implementations of the ath9k_hw_loadnf function. There are three main differences: - PHY registers for AR9003 are different - AR9003 always uses 3 chains, earlier versions are more selective - The AR9003 variant contains a fix for NF load timeouts This patch merges the two implementations into one, storing the register array in the ath_hw struct. The fix for NF load timeouts is not just relevant for AR9003, but also important for earlier hardware, so it's better to just keep one common implementation. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Felix Fietkau authored
Occasionally the hardware can send out tx status information with the wrong TID. In that case, the BA status cannot be trusted and the aggregate must be retransmitted. Signed-off-by:
-
Felix Fietkau authored
Signed-off-by:
-
