- 30 Aug, 2017 40 commits
-
-
Joerg Roedel authored
commit e3d5092b upstream. The on-stack resource-window 'win' in setup_res() is not properly initialized. This causes the pointers in the embedded 'struct resource' to contain stale addresses. These pointers (in my case the ->child pointer) later get propagated to the global iomem_resources list, causing a #GP exception when the list is traversed in iomem_map_sanity_check(). Fixes: c183619b (x86/irq, ACPI: Implement ACPI driver to support IOAPIC hotplug) Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dave Jiang authored
commit f3fd2afe upstream. It seems that under certain scenarios the SPAD can have bogus values caused by an agent (i.e. BIOS or other software) that is not the kernel driver, and that causes memory window setup failure. This should not cause the link to be disabled because if we do that, the driver will never recover again. We have verified in testing that this issue happens and prevents proper link recovery. Signed-off-by:
Dave Jiang <dave.jiang@intel.com> Acked-by:
Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by:
Jon Mason <jdmason@kudzu.us> Fixes: 84f76685 ("ntb: stop link work when we do not have memory") Signed-off-by:
-
Logan Gunthorpe authored
commit 0eb46345 upstream. After the link tests, there is a race on one side of the test for the link coming up. It's possible, in some cases, for the test script to write to the 'peer_trans' files before the link has come up. To fix this, we simply use the link event file to ensure both sides see the link as up before continuning. Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Acked-by:
-
Allen Hubbe authored
commit 88931ec3 upstream. Do not sleep in ntb_async_tx_submit, which could deadlock. This reverts commit "8c874cc1" Fixes: 8c874cc1 ("NTB: Address out of DMA descriptor issue with NTB") Reported-by:
Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by:
-
Logan Gunthorpe authored
commit 07b0b22b upstream. The code mistakenly prints the local perf results for the remote test so the script reports identical results for both directions. Fix this by ensuring we print the remote result. Signed-off-by:
-
Logan Gunthorpe authored
commit 8e8496e0 upstream. A divide by zero error occurs if qp_count is less than mw_count because num_qps_mw is calculated to be zero. The calculation appears to be incorrect. The requirement is for num_qps_mw to be set to qp_count / mw_count with any remainder divided among the earlier mws. For example, if mw_count is 5 and qp_count is 12 then mws 0 and 1 will have 3 qps per window and mws 2 through 4 will have 2 qps per window. Thus, when mw_num < qp_count % mw_count, num_qps_mw is 1 higher than when mw_num >= qp_count. Signed-off-by:
-
Logan Gunthorpe authored
commit cb827ee6 upstream. In cases where there are more mw's than spads/2-2, the mw count gets reduced to match the limitation. ntb_transport also tries to ensure that there are fewer qps than mws but uses the full mw count instead of the reduced one. When this happens, the math in 'ntb_transport_setup_qp_mw' will get confused and result in a kernel paging request bug. This patch fixes the bug by reducing qp_count to the reduced mw count instead of the full mw count. Signed-off-by:
-
Linus Torvalds authored
commit 0cc3b0ec upstream. We have a MAX_LFS_FILESIZE macro that is meant to be filled in by filesystems (and other IO targets) that know they are 64-bit clean and don't have any 32-bit limits in their IO path. It turns out that our 32-bit value for that limit was bogus. On 32-bit, the VM layer is limited by the page cache to only 32-bit index values, but our logic for that was confusing and actually wrong. We used to define that value to (((loff_t)PAGE_SIZE << (BITS_PER_LONG-1))-1) which is actually odd in several ways: it limits the index to 31 bits, and then it limits files so that they can't have data in that last byte of a page that has the highest 31-bit index (ie page index 0x7fffffff). Neither of those limitations make sense. The index is actually the full 32 bit unsigned value, and we can use that whole full page. So the maximum size of the file would logically be "PAGE_SIZE << BITS_PER_LONG". However, we do wan tto avoid the maximum index, because we have code that iterates over the page indexes, and we don't want that code to overflow. So the maximum size of a file on a 32-bit host should actually be one page less than the full 32-bit index. So the actual limit is ULONG_MAX << PAGE_SHIFT. That means that we will not actually be using the page of that last index (ULONG_MAX), but we can grow a file up to that limit. The wrong value of MAX_LFS_FILESIZE actually caused problems for Doug Nazar, who was still using a 32-bit host, but with a 9.7TB 2 x RAID5 volume. It turns out that our old MAX_LFS_FILESIZE was 8TiB (well, one byte less), but the actual true VM limit is one page less than 16TiB. This was invisible until commit c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()"), which started applying that MAX_LFS_FILESIZE limit to block devices too. NOTE! On 64-bit, the page index isn't a limiter at all, and the limit is actually just the offset type itself (loff_t), which is signed. But for clarity, on 64-bit, just use the maximum signed value, and don't make people have to count the number of 'f' characters in the hex constant. So just use LLONG_MAX for the 64-bit case. That was what the value had been before too, just written out as a hex constant. Fixes: c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()") Reported-and-tested-by:
Doug Nazar <nazard@nazar.ca> Cc: Andreas Dilger <adilger@dilger.ca> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Dave Kleikamp <shaggy@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Charles Milette authored
commit f299aec6 upstream. Add support for USB Device Rosewill RNX-N150NUB. VendorID: 0x0bda, ProductID: 0xffef Signed-off-by:
Charles Milette <charles.milette@gmail.com> Signed-off-by:
-
Srinivas Pandruvada authored
commit f1664eaa upstream. It has been reported for a while that with iio-sensor-proxy service the rotation only works after one suspend/resume cycle. This required a wait in the systemd unit file to avoid race. I found a Yoga 900 where I could reproduce this. The problem scenerio is: - During sensor driver init, enable run time PM and also set a auto-suspend for 3 seconds. This result in one runtime resume. But there is a check to avoid a powerup in this sequence, but rpm is active - User space iio-sensor-proxy tries to power up the sensor. Since rpm is active it will simply return. But sensors were not actually powered up in the prior sequence, so actaully the sensors will not work - After 3 seconds the auto suspend kicks If we add a wait in systemd service file to fire iio-sensor-proxy after 3 seconds, then now everything will work as the runtime resume will actually powerup the sensor as this is a user request. To avoid this: - Remove the check to match user requested state, this will cause a brief powerup, but if the iio-sensor-proxy starts immediately it will still work as the sensors are ON. - Also move the autosuspend delay to place when user requested turn off of sensors, like after user finished raw read or buffer disable Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Tested-by:
Bastien Nocera <hadess@hadess.net> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Dragos Bogdan authored
commit fdd0d32e upstream. According to the datasheet, the range of the acceleration is [-10 g, + 10 g], so the scale factor should be 10 instead of 5. Signed-off-by:
Dragos Bogdan <dragos.bogdan@analog.com> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Martijn Coenen authored
commit b2a6d1b9 upstream. Commit c4ea41ba ("binder: use group leader instead of open thread")' was incomplete and didn't update a check in binder_mmap(), causing all mmap() calls into the binder driver to fail. Signed-off-by:
Martijn Coenen <maco@android.com> Tested-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Riley Andrews authored
commit 00b40d61 upstream. Use wake_up_interruptible_sync() to hint to the scheduler binder transactions are synchronous wakeups. Disable preemption while waking to avoid ping-ponging on the binder lock. Signed-off-by:
Todd Kjos <tkjos@google.com> Signed-off-by:
Omprakash Dhyade <odhyade@codeaurora.org> Signed-off-by:
-
Todd Kjos authored
commit c4ea41ba upstream. The binder allocator assumes that the thread that called binder_open will never die for the lifetime of that proc. That thread is normally the group_leader, however it may not be. Use the group_leader instead of current. Signed-off-by:
-
Todd Kjos authored
commit a2b18708 upstream. This reverts commit a906d693. The patch introduced a race in the binder driver. An attempt to fix the race was submitted in "[PATCH v2] android: binder: fix dangling pointer comparison", however the conclusion in the discussion for that patch was that the original patch should be reverted. The reversion is being done as part of the fine-grained locking patchset since the patch would need to be refactored when proc->vmm_vm_mm is removed from struct binder_proc and added in the binder allocator. Signed-off-by:
-
Jeffy Chen authored
commit 25717382 upstream. It looks like bnep_session has same pattern as the issue reported in old rfcomm: while (1) { set_current_state(TASK_INTERRUPTIBLE); if (condition) break; // may call might_sleep here schedule(); } __set_current_state(TASK_RUNNING); Which fixed at: dfb2fae7 Bluetooth: Fix nested sleeps So let's fix it at the same way, also follow the suggestion of: https://lwn.net/Articles/628628/Signed-off-by:
Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by:
Brian Norris <briannorris@chromium.org> Reviewed-by:
AL Yu-Chen Cho <acho@suse.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Jeffy Chen authored
commit f06d9773 upstream. It looks like cmtp_session has same pattern as the issue reported in old rfcomm: while (1) { set_current_state(TASK_INTERRUPTIBLE); if (condition) break; // may call might_sleep here schedule(); } __set_current_state(TASK_RUNNING); Which fixed at: dfb2fae7 Bluetooth: Fix nested sleeps So let's fix it at the same way, also follow the suggestion of: https://lwn.net/Articles/628628/Signed-off-by:
-
Jeffy Chen authored
commit 5da8e47d upstream. It looks like hidp_session_thread has same pattern as the issue reported in old rfcomm: while (1) { set_current_state(TASK_INTERRUPTIBLE); if (condition) break; // may call might_sleep here schedule(); } __set_current_state(TASK_RUNNING); Which fixed at: dfb2fae7 Bluetooth: Fix nested sleeps So let's fix it at the same way, also follow the suggestion of: https://lwn.net/Articles/628628/Signed-off-by:
Rohit Vaswani <rvaswani@nvidia.com> Signed-off-by:
-
Florian Westphal authored
commit 97772bcd upstream. When doing initial conversion to rhashtable I replaced the bucket walk with a single rhashtable_lookup_fast(). When moving to rhlist I failed to properly walk the list of identical tuples, but that is what is needed for this to work correctly. The table contains the original tuples, so the reply tuples are all distinct. We currently decide that mapping is (not) in range only based on the first entry, but in case its not we need to try the reply tuple of the next entry until we either find an in-range mapping or we checked all the entries. This bug makes nat core attempt collision resolution while it might be able to use the mapping as-is. Fixes: 870190a9 ("netfilter: nat: convert nat bysrc hash to rhashtable") Reported-by:
Jaco Kroon <jaco@uls.co.za> Tested-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Zhang Bo authored
commit 436c4c45 upstream. This reverts commit 5ab92a7c. System cannot enter suspend mode because of heartbeat led trigger. In autosleep_wq, try_to_suspend function will try to enter suspend mode in specific period. it will get wakeup_count then call pm_notifier chain callback function and freeze processes. Heartbeat_pm_notifier is called and it call led_trigger_unregister to change the trigger of led device to none. It will send uevent message and the wakeup source count changed. As wakeup_count changed, suspend will abort. Fixes: 5ab92a7c ("leds: handle suspend/resume in heartbeat trigger") Signed-off-by:
Zhang Bo <bo.zhang@nxp.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Vadim Lomovtsev authored
commit eebe53e8 upstream. While running nfs/connectathon tests kernel NULL-pointer exception has been observed due to races in svcsock.c. Race is appear when kernel accepts connection by kernel_accept (which creates new socket) and start queuing ingress packets to new socket. This happens in ksoftirq context which could run concurrently on a different core while new socket setup is not done yet. The fix is to re-order socket user data init sequence and add write/read barrier calls to be sure that we got proper values for callback pointers before actually calling them. Test results: nfs/connectathon reports '0' failed tests for about 200+ iterations. Crash log: ---<-snip->--- [ 6708.638984] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 6708.647093] pgd = ffff0000094e0000 [ 6708.650497] [00000000] *pgd=0000010ffff90003, *pud=0000010ffff90003, *pmd=0000010ffff80003, *pte=0000000000000000 [ 6708.660761] Internal error: Oops: 86000005 [#1] SMP [ 6708.665630] Modules linked in: nfsv3 nfnetlink_queue nfnetlink_log nfnetlink rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache overlay xt_CONNSECMARK xt_SECMARK xt_conntrack iptable_security ip_tables ah4 xfrm4_mode_transport sctp tun binfmt_misc ext4 jbd2 mbcache loop tcp_diag udp_diag inet_diag rpcrdma ib_isert iscsi_target_mod ib_iser rdma_cm iw_cm libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib ib_ucm ib_uverbs ib_umad ib_cm ib_core nls_koi8_u nls_cp932 ts_kmp nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack vfat fat ghash_ce sha2_ce sha1_ce cavium_rng_vf i2c_thunderx sg thunderx_edac i2c_smbus edac_core cavium_rng nfsd auth_rpcgss nfs_acl lockd grace sunrpc xfs libcrc32c nicvf nicpf ast i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops [ 6708.736446] ttm drm i2c_core thunder_bgx thunder_xcv mdio_thunder mdio_cavium dm_mirror dm_region_hash dm_log dm_mod [last unloaded: stap_3c300909c5b3f46dcacd49aab3334af_87021] [ 6708.752275] CPU: 84 PID: 0 Comm: swapper/84 Tainted: G W OE 4.11.0-4.el7.aarch64 #1 [ 6708.760787] Hardware name: www.cavium.com CRB-2S/CRB-2S, BIOS 0.3 Mar 13 2017 [ 6708.767910] task: ffff810006842e80 task.stack: ffff81000689c000 [ 6708.773822] PC is at 0x0 [ 6708.776739] LR is at svc_data_ready+0x38/0x88 [sunrpc] [ 6708.781866] pc : [<0000000000000000>] lr : [<ffff0000029d7378>] pstate: 60000145 [ 6708.789248] sp : ffff810ffbad3900 [ 6708.792551] x29: ffff810ffbad3900 x28: ffff000008c73d58 [ 6708.797853] x27: 0000000000000000 x26: ffff81000bbe1e00 [ 6708.803156] x25: 0000000000000020 x24: ffff800f7410bf28 [ 6708.808458] x23: ffff000008c63000 x22: ffff000008c63000 [ 6708.813760] x21: ffff800f7410bf28 x20: ffff81000bbe1e00 [ 6708.819063] x19: ffff810012412400 x18: 00000000d82a9df2 [ 6708.824365] x17: 0000000000000000 x16: 0000000000000000 [ 6708.829667] x15: 0000000000000000 x14: 0000000000000001 [ 6708.834969] x13: 0000000000000000 x12: 722e736f622e676e [ 6708.840271] x11: 00000000f814dd99 x10: 0000000000000000 [ 6708.845573] x9 : 7374687225000000 x8 : 0000000000000000 [ 6708.850875] x7 : 0000000000000000 x6 : 0000000000000000 [ 6708.856177] x5 : 0000000000000028 x4 : 0000000000000000 [ 6708.861479] x3 : 0000000000000000 x2 : 00000000e5000000 [ 6708.866781] x1 : 0000000000000000 x0 : ffff81000bbe1e00 [ 6708.872084] [ 6708.873565] Process swapper/84 (pid: 0, stack limit = 0xffff81000689c000) [ 6708.880341] Stack: (0xffff810ffbad3900 to 0xffff8100068a0000) [ 6708.886075] Call trace: [ 6708.888513] Exception stack(0xffff810ffbad3710 to 0xffff810ffbad3840) [ 6708.894942] 3700: ffff810012412400 0001000000000000 [ 6708.902759] 3720: ffff810ffbad3900 0000000000000000 0000000060000145 ffff800f79300000 [ 6708.910577] 3740: ffff000009274d00 00000000000003ea 0000000000000015 ffff000008c63000 [ 6708.918395] 3760: ffff810ffbad3830 ffff800f79300000 000000000000004d 0000000000000000 [ 6708.926212] 3780: ffff810ffbad3890 ffff0000080f88dc ffff800f79300000 000000000000004d [ 6708.934030] 37a0: ffff800f7930093c ffff000008c63000 0000000000000000 0000000000000140 [ 6708.941848] 37c0: ffff000008c2c000 0000000000040b00 ffff81000bbe1e00 0000000000000000 [ 6708.949665] 37e0: 00000000e5000000 0000000000000000 0000000000000000 0000000000000028 [ 6708.957483] 3800: 0000000000000000 0000000000000000 0000000000000000 7374687225000000 [ 6708.965300] 3820: 0000000000000000 00000000f814dd99 722e736f622e676e 0000000000000000 [ 6708.973117] [< (null)>] (null) [ 6708.977824] [<ffff0000086f9fa4>] tcp_data_queue+0x754/0xc5c [ 6708.983386] [<ffff0000086fa64c>] tcp_rcv_established+0x1a0/0x67c [ 6708.989384] [<ffff000008704120>] tcp_v4_do_rcv+0x15c/0x22c [ 6708.994858] [<ffff000008707418>] tcp_v4_rcv+0xaf0/0xb58 [ 6709.000077] [<ffff0000086df784>] ip_local_deliver_finish+0x10c/0x254 [ 6709.006419] [<ffff0000086dfea4>] ip_local_deliver+0xf0/0xfc [ 6709.011980] [<ffff0000086dfad4>] ip_rcv_finish+0x208/0x3a4 [ 6709.017454] [<ffff0000086e018c>] ip_rcv+0x2dc/0x3c8 [ 6709.022328] [<ffff000008692fc8>] __netif_receive_skb_core+0x2f8/0xa0c [ 6709.028758] [<ffff000008696068>] __netif_receive_skb+0x38/0x84 [ 6709.034580] [<ffff00000869611c>] netif_receive_skb_internal+0x68/0xdc [ 6709.041010] [<ffff000008696bc0>] napi_gro_receive+0xcc/0x1a8 [ 6709.046690] [<ffff0000014b0fc4>] nicvf_cq_intr_handler+0x59c/0x730 [nicvf] [ 6709.053559] [<ffff0000014b1380>] nicvf_poll+0x38/0xb8 [nicvf] [ 6709.059295] [<ffff000008697a6c>] net_rx_action+0x2f8/0x464 [ 6709.064771] [<ffff000008081824>] __do_softirq+0x11c/0x308 [ 6709.070164] [<ffff0000080d14e4>] irq_exit+0x12c/0x174 [ 6709.075206] [<ffff00000813101c>] __handle_domain_irq+0x78/0xc4 [ 6709.081027] [<ffff000008081608>] gic_handle_irq+0x94/0x190 [ 6709.086501] Exception stack(0xffff81000689fdf0 to 0xffff81000689ff20) [ 6709.092929] fde0: 0000810ff2ec0000 ffff000008c10000 [ 6709.100747] fe00: ffff000008c70ef4 0000000000000001 0000000000000000 ffff810ffbad9b18 [ 6709.108565] fe20: ffff810ffbad9c70 ffff8100169d3800 ffff810006843ab0 ffff81000689fe80 [ 6709.116382] fe40: 0000000000000bd0 0000ffffdf979cd0 183f5913da192500 0000ffff8a254ce4 [ 6709.124200] fe60: 0000ffff8a254b78 0000aaab10339808 0000000000000000 0000ffff8a0c2a50 [ 6709.132018] fe80: 0000ffffdf979b10 ffff000008d6d450 ffff000008c10000 ffff000008d6d000 [ 6709.139836] fea0: 0000000000000054 ffff000008cd3dbc 0000000000000000 0000000000000000 [ 6709.147653] fec0: 0000000000000000 0000000000000000 0000000000000000 ffff81000689ff20 [ 6709.155471] fee0: ffff000008085240 ffff81000689ff20 ffff000008085244 0000000060000145 [ 6709.163289] ff00: ffff81000689ff10 ffff00000813f1e4 ffffffffffffffff ffff00000813f238 [ 6709.171107] [<ffff000008082eb4>] el1_irq+0xb4/0x140 [ 6709.175976] [<ffff000008085244>] arch_cpu_idle+0x44/0x11c [ 6709.181368] [<ffff0000087bf3b8>] default_idle_call+0x20/0x30 [ 6709.187020] [<ffff000008116d50>] do_idle+0x158/0x1e4 [ 6709.191973] [<ffff000008116ff4>] cpu_startup_entry+0x2c/0x30 [ 6709.197624] [<ffff00000808e7cc>] secondary_start_kernel+0x13c/0x160 [ 6709.203878] [<0000000001bc71c4>] 0x1bc71c4 [ 6709.207967] Code: bad PC value [ 6709.211061] SMP: stopping secondary CPUs [ 6709.218830] Starting crashdump kernel... [ 6709.222749] Bye! ---<-snip>--- Signed-off-by:
Vadim Lomovtsev <vlomovts@redhat.com> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Eric Biggers authored
commit ccd5b323 upstream. The following commit: 39a0526f ("x86/mm: Factor out LDT init from context init") renamed init_new_context() to init_new_context_ldt() and added a new init_new_context() which calls init_new_context_ldt(). However, the error code of init_new_context_ldt() was ignored. Consequently, if a memory allocation in alloc_ldt_struct() failed during a fork(), the ->context.ldt of the new task remained the same as that of the old task (due to the memcpy() in dup_mm()). ldt_struct's are not intended to be shared, so a use-after-free occurred after one task exited. Fix the bug by making init_new_context() pass through the error code of init_new_context_ldt(). This bug was found by syzkaller, which encountered the following splat: BUG: KASAN: use-after-free in free_ldt_struct.part.2+0x10a/0x150 arch/x86/kernel/ldt.c:116 Read of size 4 at addr ffff88006d2cb7c8 by task kworker/u9:0/3710 CPU: 1 PID: 3710 Comm: kworker/u9:0 Not tainted 4.13.0-rc4-next-20170811 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x24e/0x340 mm/kasan/report.c:409 __asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:429 free_ldt_struct.part.2+0x10a/0x150 arch/x86/kernel/ldt.c:116 free_ldt_struct arch/x86/kernel/ldt.c:173 [inline] destroy_context_ldt+0x60/0x80 arch/x86/kernel/ldt.c:171 destroy_context arch/x86/include/asm/mmu_context.h:157 [inline] __mmdrop+0xe9/0x530 kernel/fork.c:889 mmdrop include/linux/sched/mm.h:42 [inline] exec_mmap fs/exec.c:1061 [inline] flush_old_exec+0x173c/0x1ff0 fs/exec.c:1291 load_elf_binary+0x81f/0x4ba0 fs/binfmt_elf.c:855 search_binary_handler+0x142/0x6b0 fs/exec.c:1652 exec_binprm fs/exec.c:1694 [inline] do_execveat_common.isra.33+0x1746/0x22e0 fs/exec.c:1816 do_execve+0x31/0x40 fs/exec.c:1860 call_usermodehelper_exec_async+0x457/0x8f0 kernel/umh.c:100 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Allocated by task 3700: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 kmem_cache_alloc_trace+0x136/0x750 mm/slab.c:3627 kmalloc include/linux/slab.h:493 [inline] alloc_ldt_struct+0x52/0x140 arch/x86/kernel/ldt.c:67 write_ldt+0x7b7/0xab0 arch/x86/kernel/ldt.c:277 sys_modify_ldt+0x1ef/0x240 arch/x86/kernel/ldt.c:307 entry_SYSCALL_64_fastpath+0x1f/0xbe Freed by task 3700: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524 __cache_free mm/slab.c:3503 [inline] kfree+0xca/0x250 mm/slab.c:3820 free_ldt_struct.part.2+0xdd/0x150 arch/x86/kernel/ldt.c:121 free_ldt_struct arch/x86/kernel/ldt.c:173 [inline] destroy_context_ldt+0x60/0x80 arch/x86/kernel/ldt.c:171 destroy_context arch/x86/include/asm/mmu_context.h:157 [inline] __mmdrop+0xe9/0x530 kernel/fork.c:889 mmdrop include/linux/sched/mm.h:42 [inline] __mmput kernel/fork.c:916 [inline] mmput+0x541/0x6e0 kernel/fork.c:927 copy_process.part.36+0x22e1/0x4af0 kernel/fork.c:1931 copy_process kernel/fork.c:1546 [inline] _do_fork+0x1ef/0xfb0 kernel/fork.c:2025 SYSC_clone kernel/fork.c:2135 [inline] SyS_clone+0x37/0x50 kernel/fork.c:2129 do_syscall_64+0x26c/0x8c0 arch/x86/entry/common.c:287 return_from_SYSCALL_64+0x0/0x7a Here is a C reproducer: #include <asm/ldt.h> #include <pthread.h> #include <signal.h> #include <stdlib.h> #include <sys/syscall.h> #include <sys/wait.h> #include <unistd.h> static void *fork_thread(void *_arg) { fork(); } int main(void) { struct user_desc desc = { .entry_number = 8191 }; syscall(__NR_modify_ldt, 1, &desc, sizeof(desc)); for (;;) { if (fork() == 0) { pthread_t t; srand(getpid()); pthread_create(&t, NULL, fork_thread, NULL); usleep(rand() % 10000); syscall(__NR_exit_group, 0); } wait(NULL); } } Note: the reproducer takes advantage of the fact that alloc_ldt_struct() may use vmalloc() to allocate a large ->entries array, and after commit: 5d17a73a ("vmalloc: back off when the current task is killed") it is possible for userspace to fail a task's vmalloc() by sending a fatal signal, e.g. via exit_group(). It would be more difficult to reproduce this bug on kernels without that commit. This bug only affected kernels with CONFIG_MODIFY_LDT_SYSCALL=y. Signed-off-by:
Eric Biggers <ebiggers@google.com> Acked-by:
Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Fixes: 39a0526f ("x86/mm: Factor out LDT init from context init") Link: http://lkml.kernel.org/r/20170824175029.76040-1-ebiggers3@gmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Nicholas Piggin authored
commit 2fe59f50 upstream. When a timer base is idle, it is forwarded when a new timer is added to ensure that granularity does not become excessive. When not idle, the timer tick is expected to increment the base. However there are several problems: - If an existing timer is modified, the base is forwarded only after the index is calculated. - The base is not forwarded by add_timer_on. - There is a window after a timer is restarted from a nohz idle, after it is marked not-idle and before the timer tick on this CPU, where a timer may be added but the ancient base does not get forwarded. These result in excessive granularity (a 1 jiffy timeout can blow out to 100s of jiffies), which cause the rcu lockup detector to trigger, among other things. Fix this by keeping track of whether the timer base has been idle since it was last run or forwarded, and if so then forward it before adding a new timer. There is still a case where mod_timer optimises the case of a pending timer mod with the same expiry time, where the timer can see excessive granularity relative to the new, shorter interval. A comment is added, but it's not changed because it is an important fastpath for networking. This has been tested and found to fix the RCU softlockup messages. Testing was also done with tracing to measure requested versus achieved wakeup latencies for all non-deferrable timers in an idle system (with no lockup watchdogs running). Wakeup latency relative to absolute latency is calculated (note this suffers from round-up skew at low absolute times) and analysed: max avg std upstream 506.0 1.20 4.68 patched 2.0 1.08 0.15 The bug was noticed due to the lockup detector Kconfig changes dropping it out of people's .configs and resulting in larger base clk skew When the lockup detectors are enabled, no CPU can go idle for longer than 4 seconds, which limits the granularity errors. Sub-optimal timer behaviour is observable on a smaller scale in that case: max avg std upstream 9.0 1.05 0.19 patched 2.0 1.04 0.11 Fixes: Fixes: a683f390 ("timers: Forward the wheel clock whenever possible") Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
David Miller <davem@davemloft.net> Cc: dzickus@redhat.com Cc: sfr@canb.auug.org.au Cc: mpe@ellerman.id.au Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linuxarm@huawei.com Cc: abdhalee@linux.vnet.ibm.com Cc: John Stultz <john.stultz@linaro.org> Cc: akpm@linux-foundation.org Cc: paulmck@linux.vnet.ibm.com Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/20170822084348.21436-1-npiggin@gmail.comSigned-off-by:
-
Thomas Gleixner authored
commit dd86e373 upstream. The package management code in RAPL relies on package mapping being available before a CPU is started. This changed with: 9d85eb91 ("x86/smpboot: Make logical package management more robust") because the ACPI/BIOS information turned out to be unreliable, but that left RAPL in broken state. This was not noticed because on a regular boot all CPUs are online before RAPL is initialized. A possible fix would be to reintroduce the mess which allocates a package data structure in CPU prepare and when it turns out to already exist in starting throw it away later in the CPU online callback. But that's a horrible hack and not required at all because RAPL becomes functional for perf only in the CPU online callback. That's correct because user space is not yet informed about the CPU being onlined, so nothing caan rely on RAPL being available on that particular CPU. Move the allocation to the CPU online callback and simplify the hotplug handling. At this point the package mapping is established and correct. This also adds a missing check for available package data in the event_init() function. Reported-by:
Yasuaki Ishimatsu <yasu.isimatu@gmail.com> Signed-off-by:
Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by:
-
Masami Hiramatsu authored
commit eebc509b upstream. Fix --funcs (-F) option to show correct symbols for offline module. Since previous perf-probe uses machine__findnew_module_map() for offline module, even if user passes a module file (with full path) which is for other architecture, perf-probe always tries to load symbol map for current kernel module. This fix uses dso__new_map() to load the map from given binary as same as a map for user applications. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/148350053478.19001.15435255244512631545.stgit@devboxSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Krister Johansen <kjlx@templeofstupid.com> Signed-off-by:
-
Mark Rutland authored
commit 64aee2a9 upstream. Regardless of which events form a group, it does not make sense for the events to target different tasks and/or CPUs, as this leaves the group inconsistent and impossible to schedule. The core perf code assumes that these are consistent across (successfully intialised) groups. Core perf code only verifies this when moving SW events into a HW context. Thus, we can violate this requirement for pure SW groups and pure HW groups, unless the relevant PMU driver happens to perform this verification itself. These mismatched groups subsequently wreak havoc elsewhere. For example, we handle watchpoints as SW events, and reserve watchpoint HW on a per-CPU basis at pmu::event_init() time to ensure that any event that is initialised is guaranteed to have a slot at pmu::add() time. However, the core code only checks the group leader's cpu filter (via event_filter_match()), and can thus install follower events onto CPUs violating thier (mismatched) CPU filters, potentially installing them into a CPU without sufficient reserved slots. This can be triggered with the below test case, resulting in warnings from arch backends. #define _GNU_SOURCE #include <linux/hw_breakpoint.h> #include <linux/perf_event.h> #include <sched.h> #include <stdio.h> #include <sys/prctl.h> #include <sys/syscall.h> #include <unistd.h> static int perf_event_open(struct perf_event_attr *attr, pid_t pid, int cpu, int group_fd, unsigned long flags) { return syscall(__NR_perf_event_open, attr, pid, cpu, group_fd, flags); } char watched_char; struct perf_event_attr wp_attr = { .type = PERF_TYPE_BREAKPOINT, .bp_type = HW_BREAKPOINT_RW, .bp_addr = (unsigned long)&watched_char, .bp_len = 1, .size = sizeof(wp_attr), }; int main(int argc, char *argv[]) { int leader, ret; cpu_set_t cpus; /* * Force use of CPU0 to ensure our CPU0-bound events get scheduled. */ CPU_ZERO(&cpus); CPU_SET(0, &cpus); ret = sched_setaffinity(0, sizeof(cpus), &cpus); if (ret) { printf("Unable to set cpu affinity\n"); return 1; } /* open leader event, bound to this task, CPU0 only */ leader = perf_event_open(&wp_attr, 0, 0, -1, 0); if (leader < 0) { printf("Couldn't open leader: %d\n", leader); return 1; } /* * Open a follower event that is bound to the same task, but a * different CPU. This means that the group should never be possible to * schedule. */ ret = perf_event_open(&wp_attr, 0, 1, leader, 0); if (ret < 0) { printf("Couldn't open mismatched follower: %d\n", ret); return 1; } else { printf("Opened leader/follower with mismastched CPUs\n"); } /* * Open as many independent events as we can, all bound to the same * task, CPU0 only. */ do { ret = perf_event_open(&wp_attr, 0, 0, -1, 0); } while (ret >= 0); /* * Force enable/disble all events to trigger the erronoeous * installation of the follower event. */ printf("Opened all events. Toggling..\n"); for (;;) { prctl(PR_TASK_PERF_EVENTS_DISABLE, 0, 0, 0, 0); prctl(PR_TASK_PERF_EVENTS_ENABLE, 0, 0, 0, 0); } return 0; } Fix this by validating this requirement regardless of whether we're moving events. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Zhou Chengming <zhouchengming1@huawei.com> Link: http://lkml.kernel.org/r/1498142498-15758-1-git-send-email-mark.rutland@arm.comSigned-off-by:
-
Steven Rostedt (VMware) authored
commit a8f0f9e4 upstream. There's a small race when function graph shutsdown and the calling of the registered function graph entry callback. The callback must not reference the task's ret_stack without first checking that it is not NULL. Note, when a ret_stack is allocated for a task, it stays allocated until the task exits. The problem here, is that function_graph is shutdown, and a new task was created, which doesn't have its ret_stack allocated. But since some of the functions are still being traced, the callbacks can still be called. The normal function_graph code handles this, but starting with commit 8861dd30 ("ftrace: Access ret_stack->subtime only in the function profiler") the profiler code references the ret_stack on function entry, but doesn't check if it is NULL first. Link: https://bugzilla.kernel.org/show_bug.cgi?id=196611 Fixes: 8861dd30 ("ftrace: Access ret_stack->subtime only in the function profiler") Reported-by: lilydjwg@gmail.com Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Chuck Lever authored
commit fc788f64 upstream. When processing an NFSv4 WRITE operation, argp->end should never point past the end of the data in the final page of the page list. Otherwise, nfsd4_decode_compound can walk into uninitialized memory. More critical, nfsd4_decode_write is failing to increment argp->pagelen when it increments argp->pagelist. This can cause later xdr decoders to assume more data is available than really is, which can cause server crashes on malformed requests. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Ronnie Sahlberg authored
commit d3edede2 upstream. Add checking for the path component length and verify it is <= the maximum that the server advertizes via FileFsAttributeInformation. With this patch cifs.ko will now return ENAMETOOLONG instead of ENOENT when users to access an overlong path. To test this, try to cd into a (non-existing) directory on a CIFS share that has a too long name: cd /mnt/aaaaaaaaaaaaaaa... and it now should show a good error message from the shell: bash: cd: /mnt/aaaaaaaaaaaaaaaa...aaaaaa: File name too long rh bz 1153996 Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Sachin Prabhu authored
commit 42bec214 upstream. The df for a SMB2 share triggers a GetInfo call for FS_FULL_SIZE_INFORMATION. The values returned are used to populate struct statfs. The problem is that none of the information returned by the call contains the total blocks available on the filesystem. Instead we use the blocks available to the user ie. quota limitation when filling out statfs.f_blocks. The information returned does contain Actual free units on the filesystem and is used to populate statfs.f_bfree. For users with quota enabled, it can lead to situations where the total free space reported is more than the total blocks on the system ending up with df reports like the following # df -h /mnt/a Filesystem Size Used Avail Use% Mounted on //192.168.22.10/a 2.5G -2.3G 2.5G - /mnt/a To fix this problem, we instead populate both statfs.f_bfree with the same value as statfs.f_bavail ie. CallerAvailableAllocationUnits. This is similar to what is done already in the code for cifs and df now reports the quota information for the user used to mount the share. # df --si /mnt/a Filesystem Size Used Avail Use% Mounted on //192.168.22.10/a 2.7G 101M 2.6G 4% /mnt/a Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Signed-off-by:
Pierguido Lambri <plambri@redhat.com> Signed-off-by:
-
Nicholas Piggin authored
commit cb87481e upstream. The .data and .bss sections were modified in the generic linker script to pull in sections named .data.<C identifier>, which are generated by gcc with -ffunction-sections and -fdata-sections options. The problem with this pattern is it can also match section names that Linux defines explicitly, e.g., .data.unlikely. This can cause Linux sections to get moved into the wrong place. The way to avoid this is to use ".." separators for explicit section names (the dot character is valid in a section name but not a C identifier). However currently there are sections which don't follow this rule, so for now just disable the wild card by default. Example: http://marc.info/?l=linux-arm-kernel&m=150106824024221&w=2 Fixes: b67067f1 ("kbuild: allow archs to select link dead code/data elimination") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 8b0db1a5 upstream. Performing the following task with kmemleak enabled: # cd /sys/kernel/tracing/events/irq/irq_handler_entry/ # echo 'enable_event:kmem:kmalloc:3 if irq >' > trigger # echo 'enable_event:kmem:kmalloc:3 if irq > 31' > trigger # echo scan > /sys/kernel/debug/kmemleak # cat /sys/kernel/debug/kmemleak unreferenced object 0xffff8800b9290308 (size 32): comm "bash", pid 1114, jiffies 4294848451 (age 141.139s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81cef5aa>] kmemleak_alloc+0x4a/0xa0 [<ffffffff81357938>] kmem_cache_alloc_trace+0x158/0x290 [<ffffffff81261c09>] create_filter_start.constprop.28+0x99/0x940 [<ffffffff812639c9>] create_filter+0xa9/0x160 [<ffffffff81263bdc>] create_event_filter+0xc/0x10 [<ffffffff812655e5>] set_trigger_filter+0xe5/0x210 [<ffffffff812660c4>] event_enable_trigger_func+0x324/0x490 [<ffffffff812652e2>] event_trigger_write+0x1a2/0x260 [<ffffffff8138cf87>] __vfs_write+0xd7/0x380 [<ffffffff8138f421>] vfs_write+0x101/0x260 [<ffffffff8139187b>] SyS_write+0xab/0x130 [<ffffffff81cfd501>] entry_SYSCALL_64_fastpath+0x1f/0xbe [<ffffffffffffffff>] 0xffffffffffffffff The function create_filter() is passed a 'filterp' pointer that gets allocated, and if "set_str" is true, it is up to the caller to free it, even on error. The problem is that the pointer is not freed by create_filter() when set_str is false. This is a bug, and it is not up to the caller to free the filter on error if it doesn't care about the string. Link: http://lkml.kernel.org/r/1502705898-27571-2-git-send-email-chuhu@redhat.com Fixes: 38b78eb8 ("tracing: Factorize filter creation") Reported-by:
Chunyu Hu <chuhu@redhat.com> Tested-by:
-
Chunyu Hu authored
commit 475bb3c6 upstream. kmemleak reported the below leak when I was doing clear of the hist trigger. With this patch, the kmeamleak is gone. unreferenced object 0xffff94322b63d760 (size 32): comm "bash", pid 1522, jiffies 4403687962 (age 2442.311s) hex dump (first 32 bytes): 00 01 00 00 04 00 00 00 08 00 00 00 ff 00 00 00 ................ 10 00 00 00 00 00 00 00 80 a8 7a f2 31 94 ff ff ..........z.1... backtrace: [<ffffffff9e96c27a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff9e424cba>] kmem_cache_alloc_trace+0xca/0x1d0 [<ffffffff9e377736>] tracing_map_array_alloc+0x26/0x140 [<ffffffff9e261be0>] kretprobe_trampoline+0x0/0x50 [<ffffffff9e38b935>] create_hist_data+0x535/0x750 [<ffffffff9e38bd47>] event_hist_trigger_func+0x1f7/0x420 [<ffffffff9e38893d>] event_trigger_write+0xfd/0x1a0 [<ffffffff9e44dfc7>] __vfs_write+0x37/0x170 [<ffffffff9e44f552>] vfs_write+0xb2/0x1b0 [<ffffffff9e450b85>] SyS_write+0x55/0xc0 [<ffffffff9e203857>] do_syscall_64+0x67/0x150 [<ffffffff9e977ce7>] return_from_SYSCALL_64+0x0/0x6a [<ffffffffffffffff>] 0xffffffffffffffff unreferenced object 0xffff9431f27aa880 (size 128): comm "bash", pid 1522, jiffies 4403687962 (age 2442.311s) hex dump (first 32 bytes): 00 00 8c 2a 32 94 ff ff 00 f0 8b 2a 32 94 ff ff ...*2......*2... 00 e0 8b 2a 32 94 ff ff 00 d0 8b 2a 32 94 ff ff ...*2......*2... backtrace: [<ffffffff9e96c27a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff9e425348>] __kmalloc+0xe8/0x220 [<ffffffff9e3777c1>] tracing_map_array_alloc+0xb1/0x140 [<ffffffff9e261be0>] kretprobe_trampoline+0x0/0x50 [<ffffffff9e38b935>] create_hist_data+0x535/0x750 [<ffffffff9e38bd47>] event_hist_trigger_func+0x1f7/0x420 [<ffffffff9e38893d>] event_trigger_write+0xfd/0x1a0 [<ffffffff9e44dfc7>] __vfs_write+0x37/0x170 [<ffffffff9e44f552>] vfs_write+0xb2/0x1b0 [<ffffffff9e450b85>] SyS_write+0x55/0xc0 [<ffffffff9e203857>] do_syscall_64+0x67/0x150 [<ffffffff9e977ce7>] return_from_SYSCALL_64+0x0/0x6a [<ffffffffffffffff>] 0xffffffffffffffff Link: http://lkml.kernel.org/r/1502705898-27571-1-git-send-email-chuhu@redhat.com Fixes: 08d43a5f ("tracing: Add lock-free tracing_map") Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 4bb0f0e7 upstream. The clear_boot_tracer function is used to reset the default_bootup_tracer string to prevent it from being accessed after boot, as it originally points to init data. But since clear_boot_tracer() is called via the init_lateinit() call, it races with the initcall for registering the hwlat tracer. If someone adds "ftrace=hwlat" to the kernel command line, depending on how the linker sets up the text, the saved command line may be cleared, and the hwlat tracer never is initialized. Simply have the clear_boot_tracer() be called by initcall_lateinit_sync() as that's for tasks to be called after lateinit. Link: https://bugzilla.kernel.org/show_bug.cgi?id=196551 Fixes: e7c15cd8 ("tracing: Added hardware latency tracer") Reported-by:
Zamir SUN <sztsian@gmail.com> Signed-off-by:
-
Koji Matsuoka authored
commit fd1adef3 upstream. The VSL and HSL bits in the DSMR register set the corresponding horizontal and vertical sync signal polarity to active high. The code got it the wrong way around, fix it. Signed-off-by:
Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Thong Ho <thong.ho.px@rvc.renesas.com> Signed-off-by:
Nhan Nguyen <nhan.nguyen.yb@renesas.com> Signed-off-by:
-
Koji Matsuoka authored
commit 9cdced8a upstream. There is a bug in the setting of the DES (Display Enable Signal) register. This current setting occurs 1 dot left shift. The DES register should be set minus one value about the specifying value with H/W specification. This patch corrects it. Signed-off-by:
-
Laurent Pinchart authored
commit 05ee29e9 upstream. When an encoder fails to initialize the driver prints an error message to the kernel log. The message contains the name of the encoder's DT node, which is NULL for internal encoders. Use the of_node_full_name() macro to avoid dereferencing a NULL pointer, print the output number to add more context to the error, and make sure we still own a reference to the encoder's DT node by delaying the of_node_put() call. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
-
Maarten Lankhorst authored
commit a0ffc51e upstream. The last part of drm_atomic_check_only is testing whether we need to fail with -EINVAL when modeset is not allowed, but forgets to return the value when atomic_check() fails first. This results in -EDEADLK being replaced by -EINVAL, and the sanity check in drm_modeset_drop_locks kicks in: [ 308.531734] ------------[ cut here ]------------ [ 308.531791] WARNING: CPU: 0 PID: 1886 at drivers/gpu/drm/drm_modeset_lock.c:217 drm_modeset_drop_locks+0x33/0xc0 [drm] [ 308.531828] Modules linked in: [ 308.532050] CPU: 0 PID: 1886 Comm: kms_atomic Tainted: G U W 4.13.0-rc5-patser+ #5225 [ 308.532082] Hardware name: NUC5i7RYB, BIOS RYBDWi35.86A.0246.2015.0309.1355 03/09/2015 [ 308.532124] task: ffff8800cd9dae00 task.stack: ffff8800ca3b8000 [ 308.532168] RIP: 0010:drm_modeset_drop_locks+0x33/0xc0 [drm] [ 308.532189] RSP: 0018:ffff8800ca3bf980 EFLAGS: 00010282 [ 308.532211] RAX: dffffc0000000000 RBX: ffff8800ca3bfaf8 RCX: 0000000013a171e6 [ 308.532235] RDX: 1ffff10019477f69 RSI: ffffffffa8ba4fa0 RDI: ffff8800ca3bfb48 [ 308.532258] RBP: ffff8800ca3bf998 R08: 0000000000000000 R09: 0000000000000003 [ 308.532281] R10: 0000000079dbe066 R11: 00000000f760b34b R12: 0000000000000001 [ 308.532304] R13: dffffc0000000000 R14: 00000000ffffffea R15: ffff880096889680 [ 308.532328] FS: 00007ff00959cec0(0000) GS:ffff8800d4e00000(0000) knlGS:0000000000000000 [ 308.532359] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 308.532380] CR2: 0000000000000008 CR3: 00000000ca2e3000 CR4: 00000000003406f0 [ 308.532402] Call Trace: [ 308.532440] drm_mode_atomic_ioctl+0x19fa/0x1c00 [drm] [ 308.532488] ? drm_atomic_set_property+0x1220/0x1220 [drm] [ 308.532565] ? avc_has_extended_perms+0xc39/0xff0 [ 308.532593] ? lock_downgrade+0x610/0x610 [ 308.532640] ? drm_atomic_set_property+0x1220/0x1220 [drm] [ 308.532680] drm_ioctl_kernel+0x154/0x1a0 [drm] [ 308.532755] drm_ioctl+0x624/0x8f0 [drm] [ 308.532858] ? drm_atomic_set_property+0x1220/0x1220 [drm] [ 308.532976] ? drm_getunique+0x210/0x210 [drm] [ 308.533061] do_vfs_ioctl+0xd92/0xe40 [ 308.533121] ? ioctl_preallocate+0x1b0/0x1b0 [ 308.533160] ? selinux_capable+0x20/0x20 [ 308.533191] ? do_fcntl+0x1b1/0xbf0 [ 308.533219] ? kasan_slab_free+0xa2/0xb0 [ 308.533249] ? f_getown+0x4b/0xa0 [ 308.533278] ? putname+0xcf/0xe0 [ 308.533309] ? security_file_ioctl+0x57/0x90 [ 308.533342] SyS_ioctl+0x4e/0x80 [ 308.533374] entry_SYSCALL_64_fastpath+0x18/0xad [ 308.533405] RIP: 0033:0x7ff00779e4d7 [ 308.533431] RSP: 002b:00007fff66a043d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 308.533481] RAX: ffffffffffffffda RBX: 000000e7c7ca5910 RCX: 00007ff00779e4d7 [ 308.533560] RDX: 00007fff66a04430 RSI: 00000000c03864bc RDI: 0000000000000003 [ 308.533608] RBP: 00007ff007a5fb00 R08: 000000e7c7ca4620 R09: 000000e7c7ca5e60 [ 308.533647] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000070 [ 308.533685] R13: 0000000000000000 R14: 0000000000000000 R15: 000000e7c7ca5930 [ 308.533770] Code: ff df 55 48 89 e5 41 55 41 54 53 48 89 fb 48 83 c7 50 48 89 fa 48 c1 ea 03 80 3c 02 00 74 05 e8 94 d4 16 e7 48 83 7b 50 00 74 02 <0f> ff 4c 8d 6b 58 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 [ 308.534086] ---[ end trace 77f11e53b1df44ad ]--- Solve this by adding the missing return. This is also a bugfix because we could end up rejecting updates with -EINVAL because of a early -EDEADLK, while if atomic_check ran to completion it might have downgraded the modeset to a fastset. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Testcase: kms_atomic Link: https://patchwork.freedesktop.org/patch/msgid/20170815095706.23624-1-maarten.lankhorst@linux.intel.com Fixes: d34f20d6 ("drm: Atomic modeset ioctl") Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Chris Wilson authored
commit fe4600a5 upstream. This is the same bug as we fixed in commit f6cd7dae ("drm: Release driver references to handle before making it available again"), but now the exposure is via the PRIME lookup tables. If we remove the object/handle from the PRIME lut, then a new request for the same object/fd will generate a new handle, thus for a short window that object is known to userspace by two different handles. Fix this by releasing the driver tracking before PRIME. Fixes: 0ff926c7 ("drm/prime: add exported buffers to current fprivs imported buffer list (v2)") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Thierry Reding <treding@nvidia.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170819120558.6465-1-chris@chris-wilson.co.ukSigned-off-by:
-
Pavel Tatashin authored
commit 91b540f9 upstream. In recently introduced memblock_discard() there is a reversed logic bug. Memory is freed of static array instead of dynamically allocated one. Link: http://lkml.kernel.org/r/1503511441-95478-2-git-send-email-pasha.tatashin@oracle.com Fixes: 3010f876 ("mm: discard memblock data later") Signed-off-by:
Pavel Tatashin <pasha.tatashin@oracle.com> Reported-by:
Woody Suwalski <terraluna977@gmail.com> Tested-by:
Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
