Fix spelling mistake.
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191007082636.14686-1-anton.ivanov@cambridgegreys.com

As part of libbpf in 5e61f270 ("libbpf: stop enforcing kern_version,
populate it for users") non-LIBBPF_API __bpf_object__open_xattr() API
was removed from libbpf.h header. This broke bpftool, which relied on
that function. This patch fixes the build by switching to newly added
bpf_object__open_file() which provides the same capabilities, but is
official and future-proof API.

v1->v2:
- fix prog_type shadowing (Stanislav).

Fixes: 5e61f270 ("libbpf: stop enforcing kern_version, populate it for users")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20191007225604.2006146-1-andriin@fb.com

Current Makefile dependency chain is not strict enough and allows
test_attach_probe.o to be built before test_progs's
prog_test/attach_probe.o is built, which leads to assembler complaining
about missing included binary.

This patch is a minimal fix to fix this issue by enforcing that
test_attach_probe.o (BPF object file) is built before
prog_tests/attach_probe.c is attempted to be compiled.

Fixes: 928ca75e ("selftests/bpf: switch tests to new bpf_object__open_{file, mem}() APIs")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191007204149.1575990-1-andriin@fb.com

Andrii Nakryiko says:

====================
This patch set adds ability to auto-generate list of BPF helper definitions.
It relies on existing scripts/bpf_helpers_doc.py and include/uapi/linux/bpf.h
having a well-defined set of comments. bpf_helper_defs.h contains all BPF
helper signatures which stay in sync with latest bpf.h UAPI. This
auto-generated header is included from bpf_helpers.h, while all previously
hand-written BPF helper definitions are simultaneously removed in patch #3.
The end result is less manually maintained and redundant boilerplate code,
while also more consistent and well-documented set of BPF helpers. Generated
helper definitions are completely independent from a specific bpf.h on
a target system, because it doesn't use BPF_FUNC_xxx enums.

v3->v4:
- instead of libbpf's Makefile, integrate with selftest/bpf's Makefile (Alexei);

v2->v3:
- delete bpf_helper_defs.h properly (Alexei);

v1->v2:
- add bpf_helper_defs.h to .gitignore and `make clean` (Alexei).
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Get rid of list of BPF helpers in bpf_helpers.h (irony...) and
auto-generate it into bpf_helpers_defs.h, which is now included from
bpf_helpers.h.
Suggested-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Enhance scripts/bpf_helpers_doc.py to emit C header with BPF helper
definitions (to be included from libbpf's bpf_helpers.h).
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Various small fixes to BPF helper documentation comments, enabling
automatic header generation with a list of BPF helpers.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Using cscope and/or TAGS files for navigating the source code is useful.
Add simple targets to the Makefile to generate the index files for both
tools.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191004153444.1711278-1-toke@redhat.com

Andrii Nakryiko says:

====================
Add bpf_object__open_file() and bpf_object__open_mem() APIs that use a new
approach to providing future-proof non-ABI-breaking API changes. It relies on
APIs accepting optional self-describing "opts" struct, containing its own
size, filled out and provided by potentially outdated (as well as
newer-than-libbpf) user application. A set of internal helper macros
(OPTS_VALID, OPTS_HAS, and OPTS_GET) streamline and simplify a graceful
handling forward and backward compatibility for user applications dynamically
linked against different versions of libbpf shared library.

Users of libbpf are provided with convenience macro LIBBPF_OPTS that takes
care of populating correct structure size and zero-initializes options struct,
which helps avoid obscure issues of unitialized padding. Uninitialized padding
in a struct might turn into garbage-populated new fields understood by future
versions of libbpf.

Patch #1 removes enforcement of kern_version in libbpf and always populates
correct one on behalf of users.
Patch #2 defines necessary infrastructure for options and two new open APIs
relying on it.
Patch #3 fixes bug in bpf_object__name().
Patch #4 switches two of test_progs' tests to use new APIs as a validation
that they work as expected.

v2->v3:
- fix LIBBPF_OPTS() to ensure zero-initialization of padded bytes;
- pass through name override and relaxed maps flag for open_file() (Toke);
- fix bpf_object__name() to actually return object name;
- don't bother parsing and verifying version section (John);

v1->v2:
- use better approach for tracking last field in opts struct;
- convert few tests to new APIs for validation;
- fix bug with using offsetof(last_field) instead of offsetofend(last_field).
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Verify new bpf_object__open_mem() and bpf_object__open_file() APIs work
as expected by switching test_attach_probe test to use embedded BPF
object and bpf_object__open_mem() and test_reference_tracking to
bpf_object__open_file().
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf_object__name() was returning file path, not name. Fix this.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add new set of bpf_object__open APIs using new approach to optional
parameters extensibility allowing simpler ABI compatibility approach.

This patch demonstrates an approach to implementing libbpf APIs that
makes it easy to extend existing APIs with extra optional parameters in
such a way, that ABI compatibility is preserved without having to do
symbol versioning and generating lots of boilerplate code to handle it.
To facilitate succinct code for working with options, add OPTS_VALID,
OPTS_HAS, and OPTS_GET macros that hide all the NULL, size, and zero
checks.

Additionally, newly added libbpf APIs are encouraged to follow similar
pattern of having all mandatory parameters as formal function parameters
and always have optional (NULL-able) xxx_opts struct, which should
always have real struct size as a first field and the rest would be
optional parameters added over time, which tune the behavior of existing
API, if specified by user.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Kernel version enforcement for kprobes/kretprobes was removed from
5.0 kernel in 6c4fc209 ("bpf: remove useless version check for prog load").
Since then, BPF programs were specifying SEC("version") just to please
libbpf. We should stop enforcing this in libbpf, if even kernel doesn't
care. Furthermore, libbpf now will pre-populate current kernel version
of the host system, in case we are still running on old kernel.

This patch also removes __bpf_object__open_xattr from libbpf.h, as
nothing in libbpf is relying on having it in that header. That function
was never exported as LIBBPF_API and even name suggests its internal
version. So this should be safe to remove, as it doesn't break ABI.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Due to a quirky C syntax of declaring pointers to array or function
prototype, existing __type() macro doesn't work with map key/value types
that are array or function prototype. One has to create a typedef first
and use it to specify key/value type for a BPF map.  By using typeof(),
pointer to type is now handled uniformly for all kinds of types. Convert
one of self-tests as a demonstration.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191004040211.2434033-1-andriin@fb.com

Add a loop test with 32 bit register against 0 immediate:

  # ./test_verifier 631
  #631/p taken loop with back jump to 1st insn, 2 OK

Disassembly:

  [...]
  1b:	test   %edi,%edi
  1d:	jne    0x0000000000000014
  [...]

Pretty much similar to prior "taken loop with back jump to 1st
insn" test case just as jmp32 variant.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>

Replace 'cmp reg, 0' with 'test reg, reg' for comparisons against
zero. Saves 1 byte of instruction encoding per occurrence. The flag
results of test 'reg, reg' are identical to 'cmp reg, 0' in all
cases except for AF which we don't use/care about. In terms of
macro-fusibility in combination with a subsequent conditional jump
instruction, both have the same properties for the jumps used in
the JIT translation. For example, same JITed Cilium program can
shrink a bit from e.g. 12,455 to 12,317 bytes as tests with 0 are
used quite frequently.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>

The "path" buf is supposed to contain path + printf msg up to 24 bytes.
It will be cut anyway, but compiler generates truncation warns like:

"
samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c: In
function ‘setup_cgroup_environment’:
samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c:52:34:
warning: ‘/cgroup.controllers’ directive output may be truncated
writing 19 bytes into a region of size between 1 and 4097
[-Wformat-truncation=]
snprintf(path, sizeof(path), "%s/cgroup.controllers", cgroup_path);
				  ^~~~~~~~~~~~~~~~~~~
samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c:52:2:
note: ‘snprintf’ output between 20 and 4116 bytes into a destination
of size 4097
snprintf(path, sizeof(path), "%s/cgroup.controllers", cgroup_path);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c:72:34:
warning: ‘/cgroup.subtree_control’ directive output may be truncated
writing 23 bytes into a region of size between 1 and 4097
[-Wformat-truncation=]
snprintf(path, sizeof(path), "%s/cgroup.subtree_control",
				  ^~~~~~~~~~~~~~~~~~~~~~~
cgroup_path);
samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c:72:2:
note: ‘snprintf’ output between 24 and 4120 bytes into a destination
of size 4097
snprintf(path, sizeof(path), "%s/cgroup.subtree_control",
cgroup_path);
"

In order to avoid warns, lets decrease buf size for cgroup workdir on
24 bytes with assumption to include also "/cgroup.subtree_control" to
the address. The cut will never happen anyway.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191002120404.26962-3-ivan.khoronzhuk@linaro.org

Add static to enable_all_controllers() to get rid from annoying warning
during samples/bpf build:

samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c:44:5:
warning: no previous prototype for ‘enable_all_controllers’
[-Wmissing-prototypes]
 int enable_all_controllers(char *cgroup_path)
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191002120404.26962-2-ivan.khoronzhuk@linaro.org

New release cycle started, let's bump to v0.0.6 proactively.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20190930222503.519782-1-andriin@fb.com

Convert Renesas Electronics SH EtherMAC bindings documentation to
json-schema.  Also name bindings documentation file according to the compat
string being documented.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adopt and integrate the feature to pass the MAC address via device tree
from asix_device.c (03fc5d4f) also to other ax88179 based asix chips.
E.g. the bootloader fills in local-mac-address and the driver will then
pick up and use this MAC address.
Signed-off-by: Peter Fink <pfink@christ-es.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Just put related code together to ease code reading: the memcpy() is
related to the nla_reserve().
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
net: introduce alternative names for network interfaces

In the past, there was repeatedly discussed the IFNAMSIZ (16) limit for
netdevice name length. Now when we have PF and VF representors
with port names like "pfXvfY", it became quite common to hit this limit:
0123456789012345
enp131s0f1npf0vf6
enp131s0f1npf0vf22

Udev cannot rename these interfaces out-of-the-box and user needs to
create custom rules to handle them.

Also, udev has multiple schemes of netdev names. From udev code:
 * Type of names:
 *   b<number>                             - BCMA bus core number
 *   c<bus_id>                             - bus id of a grouped CCW or CCW device,
 *                                           with all leading zeros stripped [s390]
 *   o<index>[n<phys_port_name>|d<dev_port>]
 *                                         - on-board device index number
 *   s<slot>[f<function>][n<phys_port_name>|d<dev_port>]
 *                                         - hotplug slot index number
 *   x<MAC>                                - MAC address
 *   [P<domain>]p<bus>s<slot>[f<function>][n<phys_port_name>|d<dev_port>]
 *                                         - PCI geographical location
 *   [P<domain>]p<bus>s<slot>[f<function>][u<port>][..][c<config>][i<interface>]
 *                                         - USB port number chain
 *   v<slot>                               - VIO slot number (IBM PowerVM)
 *   a<vendor><model>i<instance>           - Platform bus ACPI instance id
 *   i<addr>n<phys_port_name>              - Netdevsim bus address and port name

One device can be often renamed by multiple patterns at the
same time (e.g. pci address/mac).

This patchset introduces alternative names for network interfaces.
Main goal is to:
1) Overcome the IFNAMSIZ limitation (altname limitation is 128 bytes)
2) Allow to have multiple names at the same time (multiple udev patterns)
3) Allow to use alternative names as handle for commands

The patchset introduces two new commands to add/delete list of properties.
Currently only alternative names are implemented but the ifrastructure
could be easily extended later on. This is very similar to the list of vlan
and tunnels being added/deleted to/from bridge ports.

See following examples.

$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff

-> Add alternative names for dummy0:

$ ip link prop add dummy0 altname someothername
$ ip link prop add dummy0 altname someotherveryveryveryverylongname
$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff
    altname someothername
    altname someotherveryveryveryverylongname
$ ip link show someotherveryveryveryverylongname
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff
    altname someothername
    altname someotherveryveryveryverylongname

-> Add bridge brx, add it's alternative name and use alternative names to
   do enslavement.

$ ip link add name brx type bridge
$ ip link prop add brx altname mypersonalsuperspecialbridge
$ ip link set someotherveryveryveryverylongname master mypersonalsuperspecialbridge
$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop master brx state DOWN mode DEFAULT group default qlen 1000
    link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff
    altname someothername
    altname someotherveryveryveryverylongname
3: brx: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff
    altname mypersonalsuperspecialbridge

-> Add ipv4 address to the bridge using alternative name:

$ ip addr add 192.168.0.1/24 dev mypersonalsuperspecialbridge
$ ip addr show mypersonalsuperspecialbridge
3: brx: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff
    altname mypersonalsuperspecialbridge
    inet 192.168.0.1/24 scope global brx
       valid_lft forever preferred_lft forever

-> Delete one of dummy0 alternative names:

$ ip link prop del dummy0 altname someotherveryveryveryverylongname
$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop master brx state DOWN mode DEFAULT group default qlen 1000
    link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff
    altname someothername
3: brx: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff
    altname mypersonalsuperspecialbridge

-> Add multiple alternative names at once

$ ip link prop add dummy0 altname a altname b altname c altname d
$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop master brx state DOWN mode DEFAULT group default qlen 1000
    link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff
    altname someothername
    altname a
    altname b
    altname c
    altname d
3: brx: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether ae:67:a9:67:46:86 brd ff:ff:ff:ff:ff:ff
    altname mypersonalsuperspecialbridge
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend the basic rtnetlink commands to use alternative interface names
as a handle instead of ifindex and ifname.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce helper function rtnl_get_dev() that gets net_device structure
instance pointer according to passed ifname or ifname attribute.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

__rtnl_newlink() code flow is a bit different around tb[IFLA_IFNAME]
processing comparing to the other places. Change that to be unified with
the rest.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend exiting getlink info message with list of properties. Now the
only ones are alternative names.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add two commands to add and delete list of link properties. Implement
the first property type along - alternative ifnames.
Each net device can have multiple alternative names.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce name_node structure to hold name of device and put it into
hashlist instead of putting there struct net_device directly. Add a
necessary infrastructure to manipulate the hashlist. This prepares
the code to use the same hashlist for alternative names introduced
later in this set.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Name hashlist is going to be used for more than just dev->name, so use
rather index hashlist for iteration over net_device instances.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp_twsk_unique() has a hard coded assumption about ipv4 loopback
being 127/8

Lets instead use the standard ipv4_is_loopback() method,
in a new ipv6_addr_v4mapped_loopback() helper.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Function netif_schedule_queue() has a hardcoded comparison between queue
state and any xoff flag. This comparison does the same thing as method
netif_xmit_stopped(). In terms of code clarity, it is better. See other
methods like: generic_xdp_tx() and dev_direct_xmit().
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The same for-loop check for the LINK_LIST_READY bit of an OOB_CTRL
register is used in several places. Factor these out into a single
function to reduce the lines of code.

Change-Id: I20e8f327045a72acc0a83e2d145ae2993ab62915
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Sanity check URB networking device parameters to avoid divide by
    zero, from Oliver Neukum.

 2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6
    don't work properly. Longer term this needs a better fix tho. From
    Vijay Khemka.

 3) Small fixes to selftests (use ping when ping6 is not present, etc.)
    from David Ahern.

 4) Bring back rt_uses_gateway member of struct rtable, it's semantics
    were not well understood and trying to remove it broke things. From
    David Ahern.

 5) Move usbnet snaity checking, ignore endpoints with invalid
    wMaxPacketSize. From Bjørn Mork.

 6) Missing Kconfig deps for sja1105 driver, from Mao Wenan.

 7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel,
    Alex Vesker, and Yevgeny Kliteynik

 8) Missing CAP_NET_RAW checks in various places, from Ori Nimron.

 9) Fix crash when removing sch_cbs entry while offloading is enabled,
    from Vinicius Costa Gomes.

10) Signedness bug fixes, generally in looking at the result given by
    of_get_phy_mode() and friends. From Dan Crapenter.

11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet.

12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern.

13) Fix quantization code in tcp_bbr, from Kevin Yang.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits)
  net: tap: clean up an indentation issue
  nfp: abm: fix memory leak in nfp_abm_u32_knode_replace
  tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state
  sk_buff: drop all skb extensions on free and skb scrubbing
  tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth
  mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions
  Documentation: Clarify trap's description
  mlxsw: spectrum: Clear VLAN filters during port initialization
  net: ena: clean up indentation issue
  NFC: st95hf: clean up indentation issue
  net: phy: micrel: add Asym Pause workaround for KSZ9021
  net: socionext: ave: Avoid using netdev_err() before calling register_netdev()
  ptp: correctly disable flags on old ioctls
  lib: dimlib: fix help text typos
  net: dsa: microchip: Always set regmap stride to 1
  nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs
  nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs
  net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N
  vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled
  net: sched: sch_sfb: don't call qdisc_put() while holding tree lock
  ...

Merge hugepage allocation updates from David Rientjes:
 "We (mostly Linus, Andrea, and myself) have been discussing offlist how
  to implement a sane default allocation strategy for hugepages on NUMA
  platforms.

  With these reverts in place, the page allocator will happily allocate
  a remote hugepage immediately rather than try to make a local hugepage
  available. This incurs a substantial performance degradation when
  memory compaction would have otherwise made a local hugepage
  available.

  This series reverts those reverts and attempts to propose a more sane
  default allocation strategy specifically for hugepages. Andrea
  acknowledges this is likely to fix the swap storms that he originally
  reported that resulted in the patches that removed __GFP_THISNODE from
  hugepage allocations.

  The immediate goal is to return 5.3 to the behavior the kernel has
  implemented over the past several years so that remote hugepages are
  not immediately allocated when local hugepages could have been made
  available because the increased access latency is untenable.

  The next goal is to introduce a sane default allocation strategy for
  hugepages allocations in general regardless of the configuration of
  the system so that we prevent thrashing of local memory when
  compaction is unlikely to succeed and can prefer remote hugepages over
  remote native pages when the local node is low on memory."

Note on timing: this reverts the hugepage VM behavior changes that got
introduced fairly late in the 5.3 cycle, and that fixed a huge
performance regression for certain loads that had been around since
4.18.

Andrea had this note:

 "The regression of 4.18 was that it was taking hours to start a VM
  where 3.10 was only taking a few seconds, I reported all the details
  on lkml when it was finally tracked down in August 2018.

     https://lore.kernel.org/linux-mm/20180820032640.9896-2-aarcange@redhat.com/

  __GFP_THISNODE in MADV_HUGEPAGE made the above enterprise vfio
  workload degrade like in the "current upstream" above. And it still
  would have been that bad as above until 5.3-rc5"

where the bad behavior ends up happening as you fill up a local node,
and without that change, you'd get into the nasty swap storm behavior
due to compaction working overtime to make room for more memory on the
nodes.

As a result 5.3 got the two performance fix reverts in rc5.

However, David Rientjes then noted that those performance fixes in turn
regressed performance for other loads - although not quite to the same
degree.  He suggested reverting the reverts and instead replacing them
with two small changes to how hugepage allocations are done (patch
descriptions rephrased by me):

 - "avoid expensive reclaim when compaction may not succeed": just admit
   that the allocation failed when you're trying to allocate a huge-page
   and compaction wasn't successful.

 - "allow hugepage fallback to remote nodes when madvised": when that
   node-local huge-page allocation failed, retry without forcing the
   local node.

but by then I judged it too late to replace the fixes for a 5.3 release.
So 5.3 was released with behavior that harked back to the pre-4.18 logic.

But now we're in the merge window for 5.4, and we can see if this
alternate model fixes not just the horrendous swap storm behavior, but
also restores the performance regression that the late reverts caused.

Fingers crossed.

* emailed patches from David Rientjes <rientjes@google.com>:
  mm, page_alloc: allow hugepage fallback to remote nodes when madvised
  mm, page_alloc: avoid expensive reclaim when compaction may not succeed
  Revert "Revert "Revert "mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask""
  Revert "Revert "mm, thp: restore node-local hugepage allocations""

For systems configured to always try hard to allocate transparent
hugepages (thp defrag setting of "always") or for memory that has been
explicitly madvised to MADV_HUGEPAGE, it is often better to fallback to
remote memory to allocate the hugepage if the local allocation fails
first.

The point is to allow the initial call to __alloc_pages_node() to attempt
to defragment local memory to make a hugepage available, if possible,
rather than immediately fallback to remote memory.  Local hugepages will
always have a better access latency than remote (huge)pages, so an attempt
to make a hugepage available locally is always preferred.

If memory compaction cannot be successful locally, however, it is likely
better to fallback to remote memory.  This could take on two forms: either
allow immediate fallback to remote memory or do per-zone watermark checks.
It would be possible to fallback only when per-zone watermarks fail for
order-0 memory, since that would require local reclaim for all subsequent
faults so remote huge allocation is likely better than thrashing the local
zone for large workloads.

In this case, it is assumed that because the system is configured to try
hard to allocate hugepages or the vma is advised to explicitly want to try
hard for hugepages that remote allocation is better when local allocation
and memory compaction have both failed.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Memory compaction has a couple significant drawbacks as the allocation
order increases, specifically:

 - isolate_freepages() is responsible for finding free pages to use as
   migration targets and is implemented as a linear scan of memory
   starting at the end of a zone,

 - failing order-0 watermark checks in memory compaction does not account
   for how far below the watermarks the zone actually is: to enable
   migration, there must be *some* free memory available.  Per the above,
   watermarks are not always suffficient if isolate_freepages() cannot
   find the free memory but it could require hundreds of MBs of reclaim to
   even reach this threshold (read: potentially very expensive reclaim with
   no indication compaction can be successful), and

 - if compaction at this order has failed recently so that it does not even
   run as a result of deferred compaction, looping through reclaim can often
   be pointless.

For hugepage allocations, these are quite substantial drawbacks because
these are very high order allocations (order-9 on x86) and falling back to
doing reclaim can potentially be *very* expensive without any indication
that compaction would even be successful.

Reclaim itself is unlikely to free entire pageblocks and certainly no
reliance should be put on it to do so in isolation (recall lumpy reclaim).
This means we should avoid reclaim and simply fail hugepage allocation if
compaction is deferred.

It is also not helpful to thrash a zone by doing excessive reclaim if
compaction may not be able to access that memory.  If order-0 watermarks
fail and the allocation order is sufficiently large, it is likely better
to fail the allocation rather than thrashing the zone.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 92717d42.

Since commit a8282608 ("Revert "mm, thp: restore node-local hugepage
allocations"") is reverted in this series, it is better to restore the
previous 5.2 behavior between the thp allocation and the page allocator
rather than to attempt any consolidation or cleanup for a policy that is
now reverted.  It's less risky during an rc cycle and subsequent patches
in this series further modify the same policy that the pre-5.3 behavior
implements.

Consolidation and cleanup can be done subsequent to a sane default page
allocation strategy, so this patch reverts a cleanup done on a strategy
that is now reverted and thus is the least risky option.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit a8282608.

The commit references the original intended semantic for MADV_HUGEPAGE
which has subsequently taken on three unique purposes:

 - enables or disables thp for a range of memory depending on the system's
   config (is thp "enabled" set to "always" or "madvise"),

 - determines the synchronous compaction behavior for thp allocations at
   fault (is thp "defrag" set to "always", "defer+madvise", or "madvise"),
   and

 - reverts a previous MADV_NOHUGEPAGE (there is no madvise mode to only
   clear previous hugepage advice).

These are the three purposes that currently exist in 5.2 and over the
past several years that userspace has been written around.  Adding a
NUMA locality preference adds a fourth dimension to an already conflated
advice mode.

Based on the semantic that MADV_HUGEPAGE has provided over the past
several years, there exist workloads that use the tunable based on these
principles: specifically that the allocation should attempt to
defragment a local node before falling back.  It is agreed that remote
hugepages typically (but not always) have a better access latency than
remote native pages, although on Naples this is at parity for
intersocket.

The revert commit that this patch reverts allows hugepage allocation to
immediately allocate remotely when local memory is fragmented.  This is
contrary to the semantic of MADV_HUGEPAGE over the past several years:
that is, memory compaction should be attempted locally before falling
back.

The performance degradation of remote hugepages over local hugepages on
Rome, for example, is 53.5% increased access latency.  For this reason,
the goal is to revert back to the 5.2 and previous behavior that would
attempt local defragmentation before falling back.  With the patch that
is reverted by this patch, we see performance degradations at the tail
because the allocator happily allocates the remote hugepage rather than
even attempting to make a local hugepage available.

zone_reclaim_mode is not a solution to this problem since it does not
only impact hugepage allocations but rather changes the memory
allocation strategy for *all* page allocations.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull powerpc fixes from Michael Ellerman:
 "An assortment of fixes that were either missed by me, or didn't arrive
  quite in time for the first v5.4 pull.

   - Most notable is a fix for an issue with tlbie (broadcast TLB
     invalidation) on Power9, when using the Radix MMU. The tlbie can
     race with an mtpid (move to PID register, essentially MMU context
     switch) on another thread of the core, which can cause stores to
     continue to go to a page after it's unmapped.

   - A fix in our KVM code to add a missing barrier, the lack of which
     has been observed to cause missed IPIs and subsequently stuck CPUs
     in the host.

   - A change to the way we initialise PCR (Processor Compatibility
     Register) to make it forward compatible with future CPUs.

   - On some older PowerVM systems our H_BLOCK_REMOVE support could
     oops, fix it to detect such systems and fallback to the old
     invalidation method.

   - A fix for an oops seen on some machines when using KASAN on 32-bit.

   - A handful of other minor fixes, and two new selftests.

  Thanks to: Alistair Popple, Aneesh Kumar K.V, Christophe Leroy,
  Gustavo Romero, Joel Stanley, Jordan Niethe, Laurent Dufour, Michael
  Roth, Oliver O'Halloran"

* tag 'powerpc-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/eeh: Fix eeh eeh_debugfs_break_device() with SRIOV devices
  powerpc/nvdimm: use H_SCM_QUERY hcall on H_OVERLAP error
  powerpc/nvdimm: Use HCALL error as the return value
  selftests/powerpc: Add test case for tlbie vs mtpidr ordering issue
  powerpc/mm: Fixup tlbie vs mtpidr/mtlpidr ordering issue on POWER9
  powerpc/book3s64/radix: Rename CPU_FTR_P9_TLBIE_BUG feature flag
  powerpc/book3s64/mm: Don't do tlbie fixup for some hardware revisions
  powerpc/pseries: Call H_BLOCK_REMOVE when supported
  powerpc/pseries: Read TLB Block Invalidate Characteristics
  KVM: PPC: Book3S HV: use smp_mb() when setting/clearing host_ipi flag
  powerpc/mm: Fix an Oops in kasan_mmu_init()
  powerpc/mm: Add a helper to select PAGE_KERNEL_RO or PAGE_READONLY
  powerpc/64s: Set reserved PCR bits
  powerpc: Fix definition of PCR bits to work with old binutils
  powerpc/book3s64/radix: Remove WARN_ON in destroy_context()
  powerpc/tm: Add tm-poison test