- 24 Jul, 2015 7 commits
-
-
Adrian Hunter authored
There are already two events for context switches, namely the tracepoint sched:sched_switch and the software event context_switches. Unfortunately neither are suitable for use by non-privileged users for the purpose of synchronizing hardware trace data (e.g. Intel PT) to the context switch. Tracepoints are no good at all for non-privileged users because they need either CAP_SYS_ADMIN or /proc/sys/kernel/perf_event_paranoid <= -1. On the other hand, kernel software events need either CAP_SYS_ADMIN or /proc/sys/kernel/perf_event_paranoid <= 1. Now many distributions do default perf_event_paranoid to 1 making context_switches a contender, except it has another problem (which is also shared with sched:sched_switch) which is that it happens before perf schedules events out instead of after perf schedules events in. Whereas a privileged user can see all the events anyway, a non-privileged user only sees events for their own processes, in other words they see when their process was scheduled out not when it was scheduled in. That presents two problems to use the event: 1. the information comes too late, so tools have to look ahead in the event stream to find out what the current state is 2. if they are unlucky tracing might have stopped before the context-switches event is recorded. This new PERF_RECORD_SWITCH event does not have those problems and it also has a couple of other small advantages. It is easier to use because it is an auxiliary event (like mmap, comm and task events) which can be enabled by setting a single bit. It is smaller than sched:sched_switch and easier to parse. To make the event useful for privileged users also, if the context is cpu-wide then the event record will be PERF_RECORD_SWITCH_CPU_WIDE which is the same as PERF_RECORD_SWITCH except it also provides the next or previous pid/tid. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by:
Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1437471846-26995-2-git-send-email-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
Since we now ask libtraceevent, the only user of this payload, to use perf's symbol resolution routines, there is no need to carry about ~4.5MB per perf.data when we can get it from one of the places the perf symbol resolution looks for that symtab (debuginfo, ~/.debug/, /proc/kallsyms, --symfs, etc), using the kernel and modules build-ids to make sure the right table is used. Acked-by:
David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/n/tip-h89ituf9rso2rv1v7kjrbeda@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
As it is not used anymore, since 'perf script' switched to asking libtraceevent to use tools/perf's symbol resolution routines. Acked-by:
-
Arnaldo Carvalho de Melo authored
We were storing a copy of kallsyms inside perf.data file so that we could resolve kernel addresses to function (start, name, mod) tuples, but that can be achieved using the symbol resolving routines we have in symbols.c, and that are used elsewhere in tools/perf. So, do just like 'perf trace' did and ask libtraceevent to use perf's symbol resolution routines. The next step is to just skip whatever kallsyms data is embedded in older perf.data files and finally to stop storing kallsyms in the perf data file, as the 20-bytes build-id stored in perf.data's header is enough to find out the right symtab (be it ELF, kcore, kallsyms, etc) to use. Acked-by:
-
Arnaldo Carvalho de Melo authored
So that beautifiers wanting to resolve kernel function addresses to names can do its work, now, for instance, the 'timer' tracepoints beautifiers works with 'perf trace', see the "function=tick..." part: # perf trace --event timer:hrtimer_start <SNIP> 0.000 timer:hrtimer_start:hrtimer=0xffff88026f3101c0 function=tick_sched_timer/0x0 expires=52098339000000 softexpires=52098339000000) 0.003 timer:hrtimer_start:hrtimer=0xffff88026f3101c0 function=tick_sched_timer/0x0 expires=52098339000000 softexpires=52098339000000) <SNIP> Reported-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
-
Arnaldo Carvalho de Melo authored
That provides the function signature expected by libtraceevent's pevent_set_function_resolver(). Acked-by:
-
Arnaldo Carvalho de Melo authored
The perf tools have a symbol resolver that includes solving kernel symbols using either kallsyms or ELF symtabs, and it also is using libtraceevent to format the trace events fields, including via subsystem specific plugins, like the "timer" one. To solve fields like "timer:hrtimer_start"'s "function", libtraceevent needs a way to map from its value to a function name and addr. This patch provides a way for tools that already have symbol resolving facilities to ask libtraceevent to use it when needing to resolve kernel symbols. Reviewed-by:
Steven Rostedt <rostedt@goodmis.org> Acked-by:
-
- 23 Jul, 2015 2 commits
-
-
Arnaldo Carvalho de Melo authored
To, with members we already have, check if a kernel level map is for the kernel proper or for a module. Acked-by:
-
Arnaldo Carvalho de Melo authored
Acked-by:
-
- 21 Jul, 2015 7 commits
-
-
Jiri Olsa authored
We will reuse argv style data in following change to display counters header showing monitored command line. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1437481927-29538-12-git-send-email-jolsa@kernel.orgSigned-off-by:
-
Jiri Olsa authored
Tolerating NULL maps in perf_evlist__propagate_maps, so we dont need to pass evlist with both cpus and threads maps defined. Signed-off-by:
-
Jiri Olsa authored
We need only bool info wether user defined her own set of cpus. Switching target argument to bool so it could be used from places without target object defined in following patches. Signed-off-by:
-
Jiri Olsa authored
Forcing perf_evlist__set_maps to propagate maps through events, so cpu/thread maps get set within evlist. Signed-off-by:
-
Jiri Olsa authored
Checking also for refcnt in thread_map test. Signed-off-by:
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: New features: - Allow filtering out of perf's PID via 'perf record --exclude-perf'. (Wang Nan) - 'perf trace' now supports syscall groups, like strace, i.e: $ trace -e file touch file Will expand 'file' into multiple, file related, syscalls. More work needed to add extra groups for other syscall groups, and also to complement what was added for the 'file' group, included as a proof of concept. (Arnaldo Carvalho de Melo) - Add lock_pi stresser to 'perf bench futex', to test the kernel code related to FUTEX_(UN)LOCK_PI. (Davidlohr Bueso) User visible fixes: - Apply --filter to all events in a glob matching, not just the last one. (Wang Nan) Documentation changes: - Document setting '-e pmu/period=N/' in the 'perf record' man page. (Kan Liang) Infrastructure changes: - 'perf probe' code simplifications and movements to separate files. (Masami Hiramatsu) - Fix makefile generation under 'dash'. (Sergei Trofimovich) Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Ingo Molnar authored
Signed-off-by:
-
- 20 Jul, 2015 15 commits
-
-
Davidlohr Bueso authored
Allows a way of measuring low level kernel implementation of FUTEX_LOCK_PI and FUTEX_UNLOCK_PI. The program comes in two flavors: (i) single futex (default), all threads contend on the same uaddr. For the sake of the benchmark, we call into kernel space even when the lock is uncontended. The kernel will set it to TID, any waters that come in and contend for the pi futex will be handled respectively by the kernel. (ii) -M option for multiple futexes, each thread deals with its own futex. This is a trivial scenario and only measures kernel handling of 0->TID transition. Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Cc: Mel Gorman <mgorman@suse.de> Link: http://lkml.kernel.org/r/1436259353.12255.78.camel@stgolabs.netSigned-off-by:
-
Sergei Trofimovich authored
Under dash 'echo -n' yields '-n' to stdout. Use printf "" instead. Signed-off-by:
Sergei Trofimovich <siarheit@google.com> Acked-by:
-
Masami Hiramatsu authored
Introduce SBUILD_ID_SIZE macro and use it instead of using BUILD_ID_SIZE * 2 + 1. Signed-off-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20150715091428.8915.75265.stgit@localhost.localdomainSigned-off-by:
-
Masami Hiramatsu authored
Move ftrace probe-event operations to probe-file.c from probe-event.c. Signed-off-by:
-
Masami Hiramatsu authored
Simplify the __add_probe_trace_events() code by taking out the probe_trace_event__set_name() and updating show_perf_probe_event() Signed-off-by:
-
Wang Nan authored
This patch allows 'perf record' to exclude events issued by perf itself by '--exclude-perf' option. Before this patch, when doing something like: # perf record -a -e syscalls:sys_enter_write <cmd> One could easily get result like this: # /tmp/perf report --stdio ... # Overhead Command Shared Object Symbol # ........ ....... .................. .................... # 99.99% perf libpthread-2.18.so [.] __write_nocancel 0.01% ls libc-2.18.so [.] write 0.01% sshd libc-2.18.so [.] write ... Where most events are generated by perf itself. A shell trick can be done to filter perf itself out: # cat << EOF > ./tmp > #!/bin/sh > exec perf record -e ... --filter="common_pid != \$\$" -a sleep 10 > EOF # chmod a+x ./tmp # ./tmp However, doing so is user unfriendly. This patch extracts evsel iteration framework introduced by patch 'perf record: Apply filter to all events in a glob matching' into foreach_evsel_in_last_glob(), and makes exclude_perf() function append new filter expression to each evsel selected by a '-e' selector. To avoid losing filters if user pass '--filter' after '--exclude-perf', this patch uses perf_evsel__append_filter() in both case, instead of perf_evsel__set_filter() which removes old filter. As a side effect, now it is possible to use multiple '--filter' option for one selector. They are combinded with '&&'. Signed-off-by:Wang Nan <wangnan0@huawei.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1436513770-8896-2-git-send-email-wangnan0@huawei.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fix from Martin Schwidefsky: "Fast path fix for the thread_struct breakage" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: adapt entry.S to the move of thread_struct
-
git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32Linus Torvalds authored
Pull AVR32 update from Hans-Christian Egtvedt. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32: AVR32/time: Migrate to new 'set-state' interface
-
Wang Nan authored
There is an old problem in perf's filter applying which first posted at Sep. 2014 at https://lkml.org/lkml/2014/9/9/944 that, if passing multiple events in a glob matching expression in cmdline then add '--filter' after them, the filter will be applied on only the last one. For example: # dd if=/dev/zero of=/dev/null & [1] 464 # perf record -a -e 'syscalls:sys_*_read' --filter 'common_pid != 464' sleep 0.1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.239 MB perf.data (2094 samples) ] # perf report --stdio | tee ... # Samples: 2K of event 'syscalls:sys_enter_read' # Event count (approx.): 2092 ... # Samples: 2 of event 'syscalls:sys_exit_read' # Event count (approx.): 2 ... In this example, filter only applied on 'syscalls:sys_exit_read', and there's no way to set filter for ''syscalls:sys_enter_read'. This patch adds a 'cmdline_group_boundary' for 'struct evsel', and apply filter on all events between two boundary marks. After applying this patch: # perf record -a -e 'syscalls:sys_*_read' --filter 'common_pid != 464' sleep 0.1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.031 MB perf.data (3 samples) ] # perf report --stdio | tee ... # Samples: 1 of event 'syscalls:sys_enter_read' # Event count (approx.): 1 ... # Samples: 2 of event 'syscalls:sys_exit_read' # Event count (approx.): 2 ... Signed-off-by:
Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1436513770-8896-1-git-send-email-wangnan0@huawei.comSigned-off-by:
-
Arnaldo Carvalho de Melo authored
I.e.: $ cat ~/share/perf-core/strace/groups/file access chmod creat execve faccessat getcwd lstat mkdir open openat quotactl readlink rename rmdir stat statfs symlink unlink $ Then, on a quiet desktop, try running this and then moving your mouse to see the deluge of mouse related activity: # perf probe 'vfs_getname=getname_flags:72 pathname=filename:string' Added new event: probe:vfs_getname (on getname_flags:72 with pathname=filename:string) You can now use it in all perf tools, such as: perf record -e probe:vfs_getname -aR sleep 1 # # trace --ev probe:vfs_getname --filter-pids 2232 -e file 0.042 (0.042 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.042 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/xterm") 0.100 (0.100 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.142 (0.018 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.142 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/index.theme") 0.192 (0.069 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.230 (0.017 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.230 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/usr/share/icons/Adwaita/cursors/xterm") 0.253 (0.041 ms): mousetweaks/2235 ... [continued]: open()) = 14 0.459 (0.008 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.459 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/left_side") 0.468 (0.017 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory Need to combine that raw_syscalls:sys_enter(open) + probe:vfs_getname + raw_syscalls:sys_exit(open) sequence... Now, if you're bored, please write some more syscall groups, like the ones in 'strace' and send it our way :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Milian Wolff <mail@milianw.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a42xklu59lcbxp7bbnic74a8@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
It is not used anywhere, expose it when/if needed. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-f6in51stj17avhk4rv11gjgg@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
So, if we have an strlist equal to: "file,close" And we call it as: struct strlist_config *config = { .dirname = "~/strace/groups", }; struct strlist *slist = strlist__new("file, close", &config); And we have: $ cat ~/strace/groups/file access open openat statfs Then the resulting strlist will have these contents: [ "access", "open", "openat", "statfs", "close" ] This will be used to implement strace syscall groups in 'perf trace', but can be used in some other tool, thus being implemented in 'strlist'. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-wi6l6qtomqlywwr6005jvs05@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
So that we can pass more info to strlist__new() without having to change its function signature, just adding entries to the strlist_config struct with sensible defaults for when those fields are not specified. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-5uaaler4931i0s9sedxjquhq@git.kernel.orgSigned-off-by:
-
Martin Schwidefsky authored
git commit 0c8c0f03 "x86/fpu, sched: Dynamically allocate 'struct fpu'" moved the thread_struct to the end of the task_struct. This causes some of the offsets used in entry.S to overflow their instruction operand field. To fix this use aghi to create a dedicated pointer for the thread_struct. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Viresh Kumar authored
Migrate avr32 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. We want to call cpu_idle_poll_ctrl() in shutdown only if we were in oneshot or resume state earlier. Create another variable to save this information and check that in shutdown callback. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Acked-by:
Hans-Christian Egtvedt <egtvedt@samfundet.no>
-
- 19 Jul, 2015 8 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Two fairly simple fixes: one is a change that causes us to have a very low queue depth leading to performance issues and the other is a null deref occasionally in tapes thanks to use after put" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: fix host max depth checking for the 'queue_depth' sysfs interface st: null pointer dereference panic caused by use after kref_put by st_open
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "Another round of MIPS fixes for 4.2. Things are looking quite decent at this stage but the recent work on the FPU support took its toll: - fix an incorrect overly restrictive ifdef - select O32 64-bit FP support for O32 binary compatibility - remove workarounds for Sibyte SB1250 Pass1 parts. There are rare fixing the workarounds is not worth the effort. - patch up an outdated and now incorrect comment" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: fpu.h: Allow 64-bit FPU on a 64-bit MIPS R6 CPU MIPS: SB1: Remove support for Pass 1 parts. MIPS: Require O32 FP64 support for MIPS64 with O32 compat MIPS: asm-offset.c: Patch up various comments refering to the old filename. -
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fix from Helge Deller: "A memory leak fix from Christophe Jaillet which was introduced with kernel 4.0 and which leads to kernel crashes on parisc after 1-3 days" * 'parisc-4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: mm: Fix a memory leak related to pmd not attached to the pgd
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "By far most of the fixes here are updates to DTS files to deal with some mostly minor bugs. There's also a fix to deal with non-PM kernel configs on i.MX, a regression fix for ethernet on PXA platforms and a dependency fix for OMAP" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: keystone: dts: rename pcie nodes to help override status ARM: keystone: dts: fix dt bindings for PCIe ARM: pxa: fix dm9000 platform data regression ARM: dts: Correct audio input route & set mic bias for am335x-pepper ARM: OMAP2+: Add HAVE_ARM_SCU for AM43XX MAINTAINERS: digicolor: add dts files ARM: ux500: fix MMC/SD card regression ARM: ux500: define serial port aliases ARM: dts: OMAP5: Add #iommu-cells property to IOMMUs ARM: dts: OMAP4: Add #iommu-cells property to IOMMUs ARM: dts: Fix frequency scaling on Gumstix Pepper ARM: dts: configure regulators for Gumstix Pepper ARM: dts: omap3: overo: Update LCD panel names ARM: dts: cros-ec-keyboard: Add support for some Japanese keys ARM: imx6: gpc: always enable PU domain if CONFIG_PM is not set ARM: dts: imx53-qsb: fix TVE entry ARM: dts: mx23: fix iio-hwmon support ARM: dts: imx27: Adjust the GPT compatible string ARM: socfpga: dts: Fix entries order ARM: socfpga: dts: Fix adxl34x formating and compatible string
-
Markos Chandras authored
Commit 6134d949 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6") added support for 64-bit FPU on a 32-bit MIPS R6 processor but it missed the 64-bit CPU case leading to FPU failures when requesting FR=1 mode (which is always the case for MIPS R6 userland) when running a 32-bit kernel on a 64-bit CPU. We also fix the MIPS R2 case. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Fixes: 6134d949 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6") Reviewed-by:
Paul Burton <paul.burton@imgtec.com> Cc: <stable@vger.kernel.org> # 4.0+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10734/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Christophe Jaillet authored
Commit 0e0da48d ("parisc: mm: don't count preallocated pmds") introduced a memory leak. After this commit, the 'return' statement in pmd_free is executed in all cases. Even for pmd that are not attached to the pgd. So 'free_pages' can never be called anymore, leading to a memory leak. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Mikulas Patocka <mpatocka@redhat.com> Acked-by:
Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v4.0+ Signed-off-by:
-
https://github.com/rjarzmik/linuxOlof Johansson authored
Merge "pxa fixes for v4.2" from Robert Jarzmik: ARM: pxa: fixes for v4.2-rc2 This single fix reenables ethernet cards for several pxa boards, broken by regulator addition to dm9000 driver. * tag 'pxa-fixes-v4.2-rc2' of https://github.com/rjarzmik/linux: ARM: pxa: fix dm9000 platform data regression
-
- 18 Jul, 2015 1 commit
-
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "A small set of ARM fixes for -rc3, most of them not far off one-liners, with the exception of fixing the V7 cache invalidation for incoming SMP processors which was causing problems for SoCFPGA devices" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: fix __virt_to_idmap build error on !MMU ARM: invalidate L1 before enabling coherency ARM: 8404/1: dma-mapping: fix off-by-one error in bitmap size check ARM: 8402/1: perf: Don't use of_node after putting it ARM: 8400/1: use virt_to_idmap to get phys_reset address
-
