- 08 Sep, 2017 11 commits
-
-
Sean Paul authored
Now that we have the DRM_DEV_* variants, we should use them. Signed-off-by:
Sean Paul <seanpaul@chromium.org> Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170908143218.9701-1-seanpaul@chromium.org
-
Maarten Lankhorst authored
Now that the last users have been converted, we can finally get rid of for_each_obj_in_state, we have better macros to replace them with. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Link: https://patchwork.freedesktop.org/patch/msgid/20170719143920.25685-8-maarten.lankhorst@linux.intel.comReviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Maarten Lankhorst authored
By always keeping track of the last commit in plane_state, we know whether there is an active update on the plane or not. With that information we can reject the fast update, and force the slowpath to be used as was originally intended. We cannot use plane_state->crtc->state here, because this only mentions the most recent commit for the crtc, but not the planes that were part of it. We specifically care about what the last commit involving this plane is, which can only be tracked with a pointer in the plane state. Changes since v1: - Clean up the whole function here, instead of partially earlier. - Add mention in the commit message why we need commit in plane_state. - Swap plane->state in intel_legacy_cursor_update, instead of reassigning all variables. With this commit We know that the cursor is not part of any active commits so this hack can be removed. Cc: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v1 Link: https://patchwork.freedesktop.org/patch/msgid/20170904104838.23822-7-maarten.lankhorst@linux.intel.com [mlankhorst: Amend commit for merge conflicts with drm-intel]
-
Maarten Lankhorst authored
Currently we neatly track the crtc state, but forget to look at plane/connector state. When doing a nonblocking modeset, immediately followed by a setprop before the modeset completes, the setprop will see the modesets new state as the old state and free it. This has to be solved by waiting for hw_done on the connector, even if it's not assigned to a crtc. When a connector is unbound we take the last crtc commit, and when it stays unbound we create a new fake crtc commit for that gets signaled on hw_done for all the planes/connectors. We wait for it the same way as we do for crtc's, which will make sure we never run into a use-after-free situation. Changes since v1: - Only create a single disable commit. (danvet) - Fix leak in intel_legacy_cursor_update. Changes since v2: - Make reference counting in drm_atomic_helper_setup_commit more obvious. (pinchartl) - Call cleanup_done for fake commit. (danvet) - Add comments to drm_atomic_helper_setup_commit. (danvet, pinchartl) - Add comment to drm_atomic_helper_swap_state. (pinchartl) Signed-off-by:
-
Maarten Lankhorst authored
When commit synchronization through drm_crtc_commit was first introduced, we tried to solve the problem of the flip_done needing a reference count by blocking in cleanup_done. This has been changed by commit 24835e44 ("drm: reference count event->completion") which made the waits here no longer needed. However, even after this commit we still needed the wait because otherwise we cannot wait for the flip_done because this item might have been removed from the list. Changed since v1: - Make mention of cleanup_done completing before flip_done. Signed-off-by:
-
Maarten Lankhorst authored
Most code only cares about the current commit or previous commit. Fortuantely we already have a place to track those. Move it to drm_crtc_state where it belongs. :) The per-crtc commit_list is kept for places where we have to look deeper than the current or previous commit for checking whether to stall on unpin. This is used in drm_atomic_helper_setup_commit and intel_has_pending_fb_unpin. Changes since v1: - Update kerneldoc for drm_crtc.commit_list. (danvet) Changes since v2: - Remove drm_atomic_helper_async_check hunk. (pinchartl) Changes since v3: - Fix use-after-free in drm_atomic_helper_commit_cleanup_done(). Signed-off-by:
-
Maarten Lankhorst authored
This will allow code to do x->commit = drm_crtc_commit_get(commit), making it clearer where references are used. Signed-off-by:
-
Maarten Lankhorst authored
The next commit removes the wait for flip_done in in drm_atomic_helper_commit_cleanup_done, but we need it for the tests to pass. Instead of using complicated vblank tracking which ends up being ignored anyway, call the correct atomic helper. :) Changes since v1: - Always call drm_atomic_helper_wait_for_flip_done, even for legacy cursor updates. (danvet) Signed-off-by:
-
Arnd Bergmann authored
gcc-7 complains about multiplying within a condition being suspicious: drivers/gpu/drm/stm/dw_mipi_dsi-stm.c: In function 'dsi_pll_get_clkout_khz': drivers/gpu/drm/stm/dw_mipi_dsi-stm.c:117:10: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context] The code here is correct, but can be easily rephrased to make that more obvious. I also swap out the error handling and the normal code path for clarity. Fixes: b0f09a3c69d9 ("drm/stm: Add STM32 DSI controller driver") Acked-by:Philippe Cornu <philippe.cornu@st.com> Tested-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Sandy Huang authored
This adds support for Rockchip soc lvds found on rk3288 Based on the patches from Mark yao and Heiko Stuebner. Signed-off-by:
Mark Yao <mark.yao@rock-chips.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
Sandy Huang <hjc@rock-chips.com> Reviewed-by:
Wadim Egorov <w.egorov@phytec.de> Link: https://patchwork.freedesktop.org/patch/msgid/1504351737-136042-1-git-send-email-hjc@rock-chips.comSigned-off-by:
-
Sandy Huang authored
This patch add Document for Rockchip Soc RK3288 LVDS, This based on the patches from Mark yao and Heiko Stuebner. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/1504351729-135932-1-git-send-email-hjc@rock-chips.com
-
- 06 Sep, 2017 1 commit
-
-
Arnd Bergmann authored
gcc-8 points out a condition that almost certainly doesn't do what the author had in mind: drivers/gpu/drm/gma500/mdfld_intel_display.c: In function 'mdfldWaitForPipeEnable': drivers/gpu/drm/gma500/mdfld_intel_display.c:102:37: error: bitwise comparison always evaluates to false [-Werror=tautological-compare] This changes it to a simple bit mask operation to check whether the bit is set. Fixes: 026abc33 ("gma500: initial medfield merge") Signed-off-by:
-
- 05 Sep, 2017 3 commits
-
-
Thierry Reding authored
The header comment in include/trace/define_trace.h specifies that the TRACE_INCLUDE_PATH needs to be relative to the define_trace.h header rather than the trace file including it. Most instances get that wrong and work around it by adding the $(src) directory to the include path. While this works, it is preferable to refer to the correct path to the trace file in the first place and avoid any workaround. Acked-by:
Christian König <christian.koenig@amd.com> Acked-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170901144954.19620-6-thierry.reding@gmail.com
-
Thierry Reding authored
The header comment in include/trace/define_trace.h specifies that the TRACE_INCLUDE_PATH needs to be relative to the define_trace.h header rather than the trace file including it. Most instances get that wrong and work around it by adding the $(src) directory to the include path. While this works, it is preferable to refer to the correct path to the trace file in the first place and avoid any workaround. Acked-by:
-
Thierry Reding authored
The header comment in include/trace/define_trace.h specifies that the TRACE_INCLUDE_PATH needs to be relative to the define_trace.h header rather than the trace file including it. Most instances get that wrong and work around it by adding the $(src) directory to the include path. While this works, it is preferable to refer to the correct path to the trace file in the first place and avoid any workaround. Acked-by:
-
- 04 Sep, 2017 3 commits
-
-
Philippe CORNU authored
Based on patch "Convert drivers to explicit reset API" from Philipp Zabel Commit a53e35db ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/1501593788-21036-4-git-send-email-philippe.cornu@st.com
-
Philippe CORNU authored
This patch cleans up the Synopsys mipi dsi register list: - rename registers according to the Synopsys documentation (1.30 & 1.31) - fix typos - re-order registers for a better coherency Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
Gabriel Krisman Bertazi authored
To represent formats 98-102, the supported formats mask must be 0x7c00000000 and not 0x3c00000000. Signed-off-by:
Gabriel Krisman Bertazi <krisman@collabora.co.uk> Reviewed-by:
Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
-
- 02 Sep, 2017 6 commits
-
-
Linus Walleij authored
This replaces the custom connector in the TVE200 with the panel bridge helper. As long as we're just using panels and no other bridges, this works just fine. Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20170902200711.29298-1-linus.walleij@linaro.org
-
Noralf Trønnes authored
drm_fb_helper_resume_worker() uses fb_helper->fbdev to call fb_set_suspend() which dereferences the pointer. Move sync-canceling of the resume worker in drm_fb_helper_fini() before setting fb_helper->fbdev to NULL. Move dirty_work as well. Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Reviewed-by:
-
Noralf Trønnes authored
drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now, so use the function directly. Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Signed-off-by:
-
Noralf Trønnes authored
drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now, so use the function directly. Cc: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Link: https://patchwork.freedesktop.org/patch/msgid/1502631125-13557-5-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Russell King <linux@armlinux.org.uk> Signed-off-by:
-
Noralf Trønnes authored
Reject mapping an imported dma-buf since is's an invalid use-case. Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
- 01 Sep, 2017 5 commits
-
-
Thierry Reding authored
The file uses inconsistent capitalization for TMDS. Since it is an abbreviation, all uppercase is correct. Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Thierry Reding authored
The error messages generated by the SCDC helpers are somewhat inconsistent with other DRM errors and even with other errors in the same file. Fix them all up to use a common format. Reviewed-by:
-
Thierry Reding authored
It's unusual to separate kerneldoc comments from the functions that they describe by a blank line. Remove them. Reviewed-by:
-
Thierry Reding authored
The for_each_crtc_in_state() is used to iterate over CRTCs rather than connectors. Reviewed-by:
-
Thierry Reding authored
The callback is named .atomic_check, not .atomc_check. Reviewed-by:
-
- 31 Aug, 2017 1 commit
-
-
Himanshu Jha authored
kfree on NULL pointer is a no-op and therefore checking is redundant. Signed-off-by:
Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by:
-
- 30 Aug, 2017 1 commit
-
-
Rodrigo Vivi authored
This Fixes build on branches where we already have format-modifier. Reference: https://lists.freedesktop.org/archives/dri-devel/2017-August/151044.html Fixes: 179c02fe ("drm/tve200: Add new driver for TVE200") Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Janet Morgan <janet.morgan@intel.com> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Daniel Stone <daniels@collabora.com> (v2) Cc: Liviu Dudau <Liviu.Dudau@arm.com> Cc: Daniel Stone <daniels@collabora.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Daniel Stone <daniels@collabora.com> Signed-off-by:
-
- 27 Aug, 2017 5 commits
-
-
Noralf Trønnes authored
drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now, so use the function directly. Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/1502631125-13557-22-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now, so use the function directly. Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Signed-off-by:
Vincent Abriou <vincent.abriou@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/1502631125-13557-17-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now, so use the function directly. Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/1502631125-13557-8-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now, so use the function directly. Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/1502631125-13557-7-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now, so use the function directly. Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Signed-off-by:
-
- 23 Aug, 2017 3 commits
-
-
Linus Walleij authored
This adds a new DRM driver for the Faraday Technology TVE200 block. This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in the StorLink SL3516 (later Cortina Systems CS3516) as well as the Grain Media GM8180. I do not have definitive word from anyone at Faraday that this IP block is theirs, but it bears the hallmark of their 3-digit version code (200) and is used in two SoCs from completely different companies. (Grain Media was fully owned by Faraday until it was transferred to NovoTek this january, and Faraday did lots of work on the StorLink SoCs.) The D-Link DIR-685 uses this in connection with the Ilitek ILI9322 panel driver that supports BT.656 input, while the GM8180 apparently has been used with the Cirrus Logic CS4954 digital video encoder. The oldest user seems to be something called Techwall 2835. This driver is heavily inspired by Eric Anholt's PL111 driver and therefore I have mentioned all the ancestor authors in the header file. Acked-by:
-
Linus Walleij authored
This adds device tree bindings for the Faraday TVE200 IP block. This IP block is present in the Gemini ARM SoC and also in some Grain Media GMxxxx SoCs. Cc: devicetree@vger.kernel.org Acked-by:
-
Daniel Vetter authored
We're not super-consistent about these, but I think it's worth to document at least the commmon patterns. v2: - Add a not about ENOTTY (it's just a confusing name, but used exactly what it's meant for in DRM) (Chris). - Unconfuse the text for ENODEV (Daniel) - Move text undert the IOCTL heading (Chris). - typos Cc: Daniel Stone <daniel@fooishbar.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: "Zhang, Tina" <tina.zhang@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
- 22 Aug, 2017 1 commit
-
-
Ville Syrjälä authored
Add defines for the secondary data packet (SDP) types from the spec. These are the DP specific ones, and in addition HDMI infoframe types (see enum hdmi_infoframe_type) are also valid SDP types. v2: Add more SDP types v3: Note the DP version that added each SDP type (Rodrigo) Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
