It is only necessary to rearm the ACPI SCI for wakeup if
pm_system_cancel_wakeup() has been called, so invoke
rearm_wake_irq() only in that case.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

After commit ac9eafbe ("ACPI: PM: s2idle: Execute LPS0 _DSM
functions with suspended devices"), a NULL pointer may be dereferenced
if suspend-to-idle is attempted on a platform without "traditional"
suspend support due to invalid fall-through in
platform_suspend_prepare_noirq().

Fix that and while at it add missing braces in platform_resume_noirq().

Fixes: ac9eafbe ("ACPI: PM: s2idle: Execute LPS0 _DSM functions with suspended devices")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Notice that intel_button_array_enable() never disables the power
button which is the only one needed to wake up the system from
suspend-to-idle, so it can be safely called during suspend-to-idle
as well as during "regular" system suspend, and rearrange the
code in the driver's "suspend" and "resume" callbacks accordingly.

While at it, use pm_suspend_no_platform() to check if the current
suspend-resume cycle is suspend-to-idle, as that is the only
case when the device should be enabled while suspended.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Both intel-hid and intel-vbtn set a wakeup_mode flag causing them
to behave in a special way during system suspend and while suspended
in their "prepare" PM callbacks and clear it in their "resume" PM
callbacks.  That may cause the wakeup_mode flag to remain set after
a system suspend failure (if some other driver's "suspend" callback
returns an error before the "suspend" callback of either intel-hid
or intel-vbtn is invoked).

After commit 10a08fd6 ("ACPI: PM: Set up EC GPE for system wakeup
from drivers that need it") that also affects the "wakeup mask" bit
of the EC GPE, which may not be cleared after a failing system
suspend.

Fix this issue by adding "complete" PM callbacks to intel-hid and
intel-vbtn to clear the wakeup_mode flag and the "wakeup mask" bit
of the EC GPE if they have not been cleared earlier.

Fixes: 10a08fd6 ("ACPI: PM: Set up EC GPE for system wakeup from drivers that need it")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

According to Section 3.5 of the "Intel Low Power S0 Idle" document [1],
Function 5 of the LPS0 _DSM is expected to be invoked when the system
configuration matches the criteria for entering the target low-power
state of the platform.  In particular, this means that all devices
should be suspended and in low-power states already when that function
is invoked.

This is not the case currently, however, because Function 5 of the
LPS0 _DSM is invoked by it before the "noirq" phase of device suspend,
which means that some devices may not have been put into low-power
states yet at that point.  That is a consequence of the previous
design of the suspend-to-idle flow that allowed the "noirq" phase of
device suspend and the "noirq" phase of device resume to be carried
out for multiple times while "suspended" (if any spurious wakeup
events were detected) and the point of the LPS0 _DSM Function 5
invocation was chosen so as to call it (and LPS0 _DSM Function 6
analogously) once per suspend-resume cycle (regardless of how many
times the "noirq" phases of device suspend and resume were carried
out while "suspended").

Now that the suspend-to-idle flow has been redesigned to carry out
the "noirq" phases of device suspend and resume once in each cycle,
the code can be reordered to follow the specification that it is
based on more closely.

For this purpose, add ->prepare_late and ->restore_early platform
callbacks for suspend-to-idle, to be executed, respectively, after
the "noirq" phase of suspending devices and before the "noirq"
phase of resuming them and make ACPI use them for the invocation
of LPS0 _DSM functions as appropriate.

While at it, move the LPS0 entry requirements check to be made
before invoking Functions 3 and 5 of the LPS0 _DSM (also once
per cycle) as follows from the specification [1].

Link: https://uefi.org/sites/default/files/resources/Intel_ACPI_Low_Power_S0_Idle.pdf # [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>

Add a pm_pr_dbg() debug statement to acpi_ec_dispatch_gpe() to print
a message when the EC GPE has been dispatched (because its status
was set).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>

Move some routines, including acpi_ec_dispatch_gpe(), that are only
used if CONFIG_PM_SLEEP is set to the #ifdef block containing the EC
suspend and resume callbacks, to make the "full EC PM picture" easier
to follow.

While at it, move the header of acpi_ec_dispatch_gpe() in the
header file to a CONFIG_PM_SLEEP #ifdef block.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>

Change acpi_ec_suspend() to use pm_suspend_no_platform() instead of
acpi_sleep_no_ec_events(), which allows the latter to be eliminated
along with the s2idle_in_progress variable which is only used by it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>

Since the ACPI SCI is set up for system wakeup before the "noirq"
suspend of devices, it is better to make suspend-to-idle follow
suspend-to-RAM (S3) and switch over the EC to polling during "noirq"
suspend (and back to interrupt-based flow during "noirq" resume).

The frequency of spurious wakeup interrupts from the EC may be
reduced this way.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>

Add a module parameter to prevent the ACPI LPS0 _DSM functions
from being invoked (if need be) and rework the suspend-to-idle
blacklist entries in acpisleep_dmi_table[] to make them simply
prevent suspend-to-idle from being used by default on the systems
in question (which really is the original purpose of those entries).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>

To allow a subsequent change to be simpler, rearrange the code in
lps0_device_attach() to reduce the indentation level and (while
at it) make it avoid calling lpi_device_get_constraints() when
lps0_device_handle is not going to be set.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>

The EC GPE needs to be set up for system wakeup only if there is a
driver depending on it, either intel-hid or intel-vbtn, bound to a
button device that is expected to wake up the system from sleep (such
as the power button on some Dell systems, like the XPS13 9360).  It
doesn't need to be set up for waking up the system from sleep in any
other cases and whether or not it is expected to wake up the system
from sleep doesn't depend on whether or not the LPS0 device is
present in the ACPI namespace.

For this reason, rearrange the ACPI suspend-to-idle code to make the
drivers depending on the EC GPE wakeup take care of setting it up and
decouple that from the LPS0 device handling.

While at it, make intel-hid and intel-vbtn prepare for system wakeup
only if they are allowed to wake up the system from sleep by user
space (via sysfs).

[Note that acpi_ec_mark_gpe_for_wake() and acpi_ec_set_gpe_wake_mask()
 are there to prevent the EC GPE from being disabled by the
 acpi_enable_all_wakeup_gpes() call in acpi_s2idle_prepare(), so on
 systems with either intel-hid or intel-vbtn this change doesn't
 affect any interactions with the hardware or platform firmware.]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

Note that after previous changes dpm_noirq_begin() and
dpm_noirq_end() each have only one caller, so move the code from
them to their respective callers and drop them.

Also note that dpm_noirq_resume_devices() and
dpm_noirq_suspend_devices() need not be exported any more, so make
them both static.

This change is not expected to alter functionality.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>

After previous changes the suspend-to-idle code flow can be
integrated more tightly with the generic system suspend code flow
by making suspend_enter() call s2idle_loop() later and removing
the direct invocations of dpm_noirq_begin(),
dpm_noirq_suspend_devices(), dpm_noirq_end(), and
dpm_noirq_resume_devices() from the latter, so do that.

This change is not expected to alter functionality.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>

After commit 33e4f80e ("ACPI / PM: Ignore spurious SCI wakeups
from suspend-to-idle") the "noirq" phases of device suspend and
resume may run for multiple times during suspend-to-idle, if there
are spurious system wakeup events while suspended.  However, this
is complicated and fragile and actually unnecessary.

The main reason for doing this is that on some systems the EC may
signal system wakeup events (power button events, for example) as
well as events that should not cause the system to resume (spurious
system wakeup events).  Thus, in order to determine whether or not
a given event signaled by the EC while suspended is a proper system
wakeup one, the EC GPE needs to be dispatched and to start with that
was achieved by allowing the ACPI SCI action handler to run, which
was only possible after calling resume_device_irqs().

However, dispatching the EC GPE this way turned out to take too much
time in some cases and some EC events might be missed due to that, so
commit 68e22011 ("ACPI: EC: Dispatch the EC GPE directly on
s2idle wake") started to dispatch the EC GPE right after a wakeup
event has been detected, so in fact the full ACPI SCI action handler
doesn't need to run any more to deal with the wakeups coming from the
EC.

Use this observation to simplify the suspend-to-idle control flow
so that the "noirq" phases of device suspend and resume are each
run only once in every suspend-to-idle cycle, which is reported to
significantly reduce power drawn by some systems when suspended to
idle (by allowing them to reach a deep platform-wide low-power state
through the suspend-to-idle flow).  [What appears to happen is that
the "noirq" resume of devices after a spurious EC wakeup brings some
devices into a state in which they prevent the platform from reaching
the deep low-power state going forward, even after a subsequent
"noirq" suspend phase, and on some systems the EC triggers such
wakeups already when the "noirq" suspend of devices is running for
the first time in the given suspend/resume cycle, so the platform
cannot reach the deep low-power state at all.]

First, make acpi_s2idle_wake() use the acpi_ec_dispatch_gpe() return
value to determine whether or not the wakeup may have been triggered
by the EC (in which case the system wakeup is canceled and ACPI
events are processed in order to determine whether or not the event
is a proper system wakeup one) and use rearm_wake_irq() (introduced
by a previous change) in it to rearm the ACPI SCI for system wakeup
detection in case the system will remain suspended.

Second, drop acpi_s2idle_sync(), which is not needed any more, and
the corresponding global platform suspend-to-idle callback.

Next, drop the pm_wakeup_pending() check (which is an optimization
only) from __device_suspend_noirq() to prevent it from returning
errors on system wakeups occurring before the "noirq" phase of
device suspend is complete (as in the case of suspend-to-idle it is
not known whether or not these wakeups are suprious at that point),
in order to avoid having to carry out a "noirq" resume of devices
on a spurious system wakeup.

Finally, change the code flow in s2idle_loop() to (1) run the
"noirq" suspend of devices once before starting the loop, (2) check
for spurious EC wakeups (via the platform ->wake callback) for the
first time before calling s2idle_enter(), and (3) run the "noirq"
resume of devices once after leaving the loop.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>

The role of the s2idle_wakeup variable is to cause
acpi_pm_wakeup_event() and acpi_pm_notify_handler() to
increment pm_abort_suspend and trigger a wakeup from
suspend-to-idle in case the ACPI SCI wakeup was canceled
by acpi_s2idle_wake().

However, for this purpose it need not be set in acpi_s2idle_wake()
and cleared in acpi_s2idle_sync(), respectively.  In fact, it
may be set as early as in acpi_s2idle_prepare() and cleared as
late as in acpi_s2idle_restore(), so do that to allow subsequent
changes to be simpler.

This change is not expected to alter functionality.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>

It is not actually guaranteed that pm_abort_suspend will be
nonzero when pm_system_cancel_wakeup() is called which may lead to
subtle issues, so make it use atomic_dec_if_positive() instead of
atomic_dec() for the safety sake.

Fixes: 33e4f80e ("ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>

On some systems, if suspend-to-idle is used, the EC may signal system
wakeup events (power button events, for example) as well as events
that should not cause the system to resume and acpi_ec_dispatch_gpe()
needs to be called to determine whether or not the system should
resume then.  In particular, if acpi_ec_dispatch_gpe() doesn't detect
any EC events at all, the system should remain suspended, so it is
useful to know when that is the case.

For this reason, make acpi_ec_dispatch_gpe() return a bool value
indicating whether or not any EC events have been detected by it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>

In some cases it is useful to know whether or not the
acpi_ev_detect_gpe() called by acpi_dispatch_gpe() has found
the GPE to be active, so return the return value of it (whose
data type is u32) from latter.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>

Introduce a new function, rearm_wake_irq(), allowing a wakeup IRQ
to be armed for systen wakeup detection again without running any
action handlers associated with it after it has been armed for
wakeup detection and triggered.

That is useful for IRQs, like ACPI SCI, that may deliver wakeup
as well as non-wakeup interrupts when armed for systen wakeup
detection.  In those cases, it may be possible to determine whether
or not the delivered interrupt is a systen wakeup one without
running the entire action handler (or handlers, if the IRQ is
shared) for the IRQ, and if the interrupt turns out to be a
non-wakeup one, the IRQ can be rearmed with the help of the
new function.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>

Pull Devicetree fixes from Rob Herring:
 "Fix several warnings/errors in validation of binding schemas"

* tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples
  dt-bindings: iio: ad7124: Fix dtc warnings in example
  dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example
  dt-bindings: pinctrl: aspeed: Fix AST2500 example errors
  dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors
  dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes
  dt-bindings: Ensure child nodes are of type 'object'

Pull vfs documentation typo fix from Al Viro.

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  typo fix: it's d_make_root, not d_make_inode...

Pull cifs fixes from Steve French:
 "Two fixes for stable, one that had dependency on earlier patch in this
  merge window and can now go in, and a perf improvement in SMB3 open"

* tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module number
  cifs: flush before set-info if we have writeable handles
  smb3: optimize open to not send query file internal info
  cifs: copy_file_range needs to strip setuid bits and update timestamps
  CIFS: fix deadlock in cached root handling

The commit b3aa14f0 ("iommu: remove the mapping_error dma_map_ops
method") incorrectly changed the checking from dma_ops_alloc_iova() in
map_sg() causes a crash under memory pressure as dma_ops_alloc_iova()
never return DMA_MAPPING_ERROR on failure but 0, so the error handling
is all wrong.

   kernel BUG at drivers/iommu/iova.c:801!
    Workqueue: kblockd blk_mq_run_work_fn
    RIP: 0010:iova_magazine_free_pfns+0x7d/0xc0
    Call Trace:
     free_cpu_cached_iovas+0xbd/0x150
     alloc_iova_fast+0x8c/0xba
     dma_ops_alloc_iova.isra.6+0x65/0xa0
     map_sg+0x8c/0x2a0
     scsi_dma_map+0xc6/0x160
     pqi_aio_submit_io+0x1f6/0x440 [smartpqi]
     pqi_scsi_queue_command+0x90c/0xdd0 [smartpqi]
     scsi_queue_rq+0x79c/0x1200
     blk_mq_dispatch_rq_list+0x4dc/0xb70
     blk_mq_sched_dispatch_requests+0x249/0x310
     __blk_mq_run_hw_queue+0x128/0x200
     blk_mq_run_work_fn+0x27/0x30
     process_one_work+0x522/0xa10
     worker_thread+0x63/0x5b0
     kthread+0x1d2/0x1f0
     ret_from_fork+0x22/0x40

Fixes: b3aa14f0 ("iommu: remove the mapping_error dma_map_ops method")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The hexagon implementation pte_alloc_one(), pte_alloc_one_kernel(),
pte_free_kernel() and pte_free() is identical to the generic except of
lack of __GFP_ACCOUNT for the user PTEs allocation.

Switch hexagon to use generic version of these functions.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull NTB updates from Jon Mason:
 "New feature to add support for NTB virtual MSI interrupts, the ability
  to test and use this feature in the NTB transport layer.

  Also, bug fixes for the AMD and Switchtec drivers, as well as some
  general patches"

* tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits)
  NTB: Describe the ntb_msi_test client in the documentation.
  NTB: Add MSI interrupt support to ntb_transport
  NTB: Add ntb_msi_test support to ntb_test
  NTB: Introduce NTB MSI Test Client
  NTB: Introduce MSI library
  NTB: Rename ntb.c to support multiple source files in the module
  NTB: Introduce functions to calculate multi-port resource index
  NTB: Introduce helper functions to calculate logical port number
  PCI/switchtec: Add module parameter to request more interrupts
  PCI/MSI: Support allocating virtual MSI interrupts
  ntb_hw_switchtec: Fix setup MW with failure bug
  ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case
  ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function
  NTB: correct ntb_dev_ops and ntb_dev comment typos
  NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask()
  ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev()
  NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed
  NTB: ntb_hw_amd: set peer limit register
  NTB: ntb_perf: Clear stale values in doorbell and command SPAD register
  NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers
  ...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Now that examples are validated against the DT schema, an error with
required 'clocks' property missing is exposed:

Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \
pinctrl@40020000: gpio@0: 'clocks' is a required property
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \
pinctrl@50020000: gpio@1000: 'clocks' is a required property
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \
pinctrl@50020000: gpio@2000: 'clocks' is a required property

Add the missing 'clocks' properties to the examples to fix the errors.

Fixes: 2c9239c1 ("dt-bindings: pinctrl: Convert stm32 pinctrl bindings to json-schema")
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>

With the conversion to DT schema, the examples are now compiled with
dtc. The ad7124 binding example has the following warning:

Documentation/devicetree/bindings/iio/adc/adi,ad7124.example.dts:19.11-21: \
Warning (reg_format): /example-0/adc@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)

There's a default #size-cells and #address-cells values of 1 for
examples. For examples needing different values such as this one on a
SPI bus, they need to provide a SPI bus parent node.

Fixes: 26ae15e6 ("Convert AD7124 bindings documentation to YAML format.")

Cc: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

Now that examples are validated against the DT schema, a typo in
avia-hx711 example generates a warning:

Documentation/devicetree/bindings/iio/adc/avia-hx711.example.dt.yaml: weight: 'avdd-supply' is a required property

Fix the typo.

Fixes: 5150ec3f ("avia-hx711.yaml: transform DT binding to YAML")
Cc: Andreas Klinger <ak@it-klinger.de>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

The schema examples are now validated against the schema itself. The
AST2500 pinctrl schema has a couple of errors:

Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \
example-0: $nodename:0: 'example-0' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \
pinctrl: aspeed,external-nodes: [[1, 2]] is too short

Fixes: 0a617de1 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema")
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Rob Herring <robh@kernel.org>

The Aspeed pinctl schema have errors in the 'compatible' schema:

Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml: \
properties:compatible:enum: ['aspeed', 'ast2400-pinctrl', 'aspeed', 'g4-pinctrl'] has non-unique elements
Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml: \
properties:compatible:enum: ['aspeed', 'ast2500-pinctrl', 'aspeed', 'g5-pinctrl'] has non-unique elements

Flow style sequences have to be quoted if the vales contain ','. Fix
this by using the more common one line per entry formatting.

Fixes: 0a617de1 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema")
Fixes: 07457937 ("dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema")
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Rob Herring <robh@kernel.org>

Matching on the 'cpus' node was a bad choice because the schema is
incorrectly applied to non-RiscV cpus nodes. As we now have a common cpus
schema which checks the general structure, it is also redundant to do so
in the Risc-V CPU schema.

The downside is one could conceivably mix different architecture's cpu
nodes or have typos in the compatible string. The latter problem pretty
much exists for every schema.
Acked-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Properties which are child node definitions need to have an explict
type. Otherwise, a matching (DT) property can silently match when an
error is desired. Fix this up tree-wide. Once this is fixed, the
meta-schema will enforce this on any child node definitions.

Cc: Chen-Yu Tsai <wens@csie.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: linux-mtd@lists.infradead.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-spi@vger.kernel.org
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Pull more input updates from Dmitry Torokhov:

 - Apple SPI keyboard and trackpad driver for newer Macs

 - ALPS driver will ignore trackpoint-only devices to give the
   trackpoint driver a chance to handle them properly

 - another Lenovo is switched over to SMbus from PS/2

 - assorted driver fixups.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: alps - fix a mismatch between a condition check and its comment
  Input: psmouse - fix build error of multiple definition
  Input: applespi - remove set but not used variables 'sts'
  Input: add Apple SPI keyboard and trackpad driver
  Input: alps - don't handle ALPS cs19 trackpoint-only device
  Input: hyperv-keyboard - remove dependencies on PAGE_SIZE for ring buffer
  Input: adp5589 - initialize GPIO controller parent device
  Input: iforce - remove empty multiline comments
  Input: synaptics - fix misuse of strlcpy
  Input: auo-pixcir-ts - switch to using  devm_add_action_or_reset()
  Input: gtco - bounds check collection indent level
  Input: mtk-pmic-keys - add of_node_put() before return
  Input: sun4i-lradc-keys - add of_node_put() before return
  Input: synaptics - whitelist Lenovo T580 SMBus intertouch

Pull dma-mapping fixes from Christoph Hellwig:
 "Fix various regressions:

   - force unencrypted dma-coherent buffers if encryption bit can't fit
     into the dma coherent mask (Tom Lendacky)

   - avoid limiting request size if swiotlb is not used (me)

   - fix swiotlb handling in dma_direct_sync_sg_for_cpu/device (Fugang
     Duan)"

* tag 'dma-mapping-5.3-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device
  dma-direct: only limit the mapping size if swiotlb could be used
  dma-mapping: add a dma_addressing_limited helper
  dma-direct: Force unencrypted DMA under SME for certain DMA masks

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 specific fixes and updates:

   - The CR2 corruption fixes which store CR2 early in the entry code
     and hand the stored address to the fault handlers.

   - Revert a forgotten leftover of the dropped FSGSBASE series.

   - Plug a memory leak in the boot code.

   - Make the Hyper-V assist functionality robust by zeroing the shadow
     page.

   - Remove a useless check for dead processes with LDT

   - Update paravirt and VMware maintainers entries.

   - A few cleanup patches addressing various compiler warnings"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry/64: Prevent clobbering of saved CR2 value
  x86/hyper-v: Zero out the VP ASSIST PAGE on allocation
  x86, boot: Remove multiple copy of static function sanitize_boot_params()
  x86/boot/compressed/64: Remove unused variable
  x86/boot/efi: Remove unused variables
  x86/mm, tracing: Fix CR2 corruption
  x86/entry/64: Update comments and sanity tests for create_gap
  x86/entry/64: Simplify idtentry a little
  x86/entry/32: Simplify common_exception
  x86/paravirt: Make read_cr2() CALLEE_SAVE
  MAINTAINERS: Update PARAVIRT_OPS_INTERFACE and VMWARE_HYPERVISOR_INTERFACE
  x86/process: Delete useless check for dead process with LDT
  x86: math-emu: Hide clang warnings for 16-bit overflow
  x86/e820: Use proper booleans instead of 0/1
  x86/apic: Silence -Wtype-limits compiler warnings
  x86/mm: Free sme_early_buffer after init
  x86/boot: Fix memory leak in default_get_smp_config()
  Revert "x86/ptrace: Prevent ptrace from clearing the FS/GS selector" and fix the test

Pull perf tooling updates from Thomas Gleixner:
 "A set of perf improvements and fixes:

  perf db-export:
   - Improvements in how COMM details are exported to databases for post
     processing and use in the sql-viewer.py UI.

   - Export switch events to the database.

  BPF:
   - Bump rlimit(MEMLOCK) for 'perf test bpf' and 'perf trace', just
     like selftests/bpf/bpf_rlimit.h do, which makes errors due to
     exhaustion of this limit, which are kinda cryptic (EPERM sometimes)
     less frequent.

  perf version:
   - Fix segfault due to missing OPT_END(), noticed on PowerPC.

  perf vendor events:
   - Add JSON files for IBM s/390 machine type 8561.

  perf cs-etm (ARM):
   - Fix two cases of error returns not bing done properly: Invalid
     ERR_PTR() use and loss of propagation error codes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
  perf version: Fix segfault due to missing OPT_END()
  perf vendor events s390: Add JSON files for machine type 8561
  perf cs-etm: Return errcode in cs_etm__process_auxtrace_info()
  perf cs-etm: Remove errnoeous ERR_PTR() usage in cs_etm__process_auxtrace_info
  perf scripts python: export-to-postgresql.py: Export switch events
  perf scripts python: export-to-sqlite.py: Export switch events
  perf db-export: Export switch events
  perf db-export: Factor out db_export__threads()
  perf script: Add scripting operation process_switch()
  perf scripts python: exported-sql-viewer.py: Use new 'has_calls' column
  perf scripts python: exported-sql-viewer.py: Remove redundant semi-colons
  perf scripts python: export-to-postgresql.py: Add has_calls column to comms table
  perf scripts python: export-to-sqlite.py: Add has_calls column to comms table
  perf db-export: Also export thread's current comm
  perf db-export: Factor out db_export__comm()
  perf scripts python: export-to-postgresql.py: Export comm details
  perf scripts python: export-to-sqlite.py: Export comm details
  perf db-export: Export comm details
  perf db-export: Fix a white space issue in db_export__sample()
  perf db-export: Move export__comm_thread into db_export__sample()
  ...

Pull core fixes from Thomas Gleixner:

 - A collection of objtool fixes which address recent fallout partially
   exposed by newer toolchains, clang, BPF and general code changes.

 - Force USER_DS for user stack traces

[ Note: the "objtool fixes" are not all to objtool itself, but for
  kernel code that triggers objtool warnings.

  Things like missing function size annotations, or code that confuses
  the unwinder etc.   - Linus]

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  objtool: Support conditional retpolines
  objtool: Convert insn type to enum
  objtool: Fix seg fault on bad switch table entry
  objtool: Support repeated uses of the same C jump table
  objtool: Refactor jump table code
  objtool: Refactor sibling call detection logic
  objtool: Do frame pointer check before dead end check
  objtool: Change dead_end_function() to return boolean
  objtool: Warn on zero-length functions
  objtool: Refactor function alias logic
  objtool: Track original function across branches
  objtool: Add mcsafe_handle_tail() to the uaccess safe list
  bpf: Disable GCC -fgcse optimization for ___bpf_prog_run()
  x86/uaccess: Remove redundant CLACs in getuser/putuser error paths
  x86/uaccess: Don't leak AC flag into fentry from mcsafe_handle_tail()
  x86/uaccess: Remove ELF function annotation from copy_user_handle_tail()
  x86/head/64: Annotate start_cpu0() as non-callable
  x86/entry: Fix thunk function ELF sizes
  x86/kvm: Don't call kvm_spurious_fault() from .fixup
  x86/kvm: Replace vmx_vmenter()'s call to kvm_spurious_fault() with UD2
  ...