- 25 Nov, 2016 12 commits
-
-
Eric Leblond authored
It is not correct to assimilate the elf data of the maps section to an array of map definition. In fact the sizes differ. The offset provided in the symbol section has to be used instead. This patch fixes a bug causing a elf with two maps not to load correctly. Wang Nan added: This patch requires a name for each BPF map, so array of BPF maps is not allowed. This restriction is reasonable, because kernel verifier forbid indexing BPF map from such array unless the index is a fixed value, but if the index is fixed why not merging it into name? For example: Program like this: ... unsigned long cpu = get_smp_processor_id(); int *pval = map_lookup_elem(&map_array[cpu], &key); ... Generates bytecode like this: 0: (b7) r1 = 0 1: (63) *(u32 *)(r10 -4) = r1 2: (b7) r1 = 680997 3: (63) *(u32 *)(r10 -8) = r1 4: (85) call 8 5: (67) r0 <<= 4 6: (18) r1 = 0x112dd000 8: (0f) r0 += r1 9: (bf) r2 = r10 10: (07) r2 += -4 11: (bf) r1 = r0 12: (85) call 1 Where instruction 8 is the computation, 8 and 11 render r1 to an invalid value for function map_lookup_elem, causes verifier report error. Signed-off-by:
Eric Leblond <eric@regit.org> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Wang Nan <wangnan0@huawei.com> [ Merge bpf_object__init_maps_name into bpf_object__init_maps. Fix segfault for buggy BPF script Validate obj->maps ] Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161115040617.69788-5-wangnan0@huawei.comSigned-off-by:
Wang Nan <wangnan0@huawei.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Wang Nan authored
Commit 0b3c2264 ("perf symbols: Fix kallsyms perf test on ppc64le") refers struct symbol in probe_event.h, but forgets to include its definition. Gcc will complain about it when that definition is not added, by sheer luck, by some other header included before probe_event.h. Signed-off-by:
-
Wang Nan authored
Before this patch perf panics if kptr_restrict is set to 1 and perf is owned by root with suid set: $ whoami wangnan $ ls -l ./perf -rwsr-xr-x 1 root root 19781908 Sep 21 19:29 /home/wangnan/perf $ cat /proc/sys/kernel/kptr_restrict 1 $ cat /proc/sys/kernel/perf_event_paranoid -1 $ ./perf record -a Segmentation fault (core dumped) $ The reason is that perf assumes it is allowed to read kptr from /proc/kallsyms when euid is root, but in fact the kernel doesn't allow reading kptr when euid and uid do not match with each other: $ cp /bin/cat . $ sudo chown root:root ./cat $ sudo chmod u+s ./cat $ cat /proc/kallsyms | grep do_fork 0000000000000000 T _do_fork <--- kptr is hidden even euid is root $ sudo cat /proc/kallsyms | grep do_fork ffffffff81080230 T _do_fork See lib/vsprintf.c for kernel side code. This patch fixes this problem by checking both uid and euid. Signed-off-by:
-
Wang Nan authored
On ubuntu the internal kernel version code is different from what can be retrived from uname: $ uname -r 4.4.0-47-generic $ cat /lib/modules/`uname -r`/build/include/generated/uapi/linux/version.h #define LINUX_VERSION_CODE 263192 #define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c)) $ cat /lib/modules/`uname -r`/build/include/generated/utsrelease.h #define UTS_RELEASE "4.4.0-47-generic" #define UTS_UBUNTU_RELEASE_ABI 47 $ cat /proc/version_signature Ubuntu 4.4.0-47.68-generic 4.4.24 The macro LINUX_VERSION_CODE is set to 4.4.24 (263192 == 0x40418), but `uname -r` reports 4.4.0. This mismatch causes LINUX_VERSION_CODE macro passed to BPF script become an incorrect value, results in magic failure in BPF loading: $ sudo ./buildperf/perf record -e ./tools/perf/tests/bpf-script-example.c ls event syntax error: './tools/perf/tests/bpf-script-example.c' \___ Failed to load program for unknown reason According to Ubuntu document (https://wiki.ubuntu.com/Kernel/FAQ), the correct kernel version can be retrived through /proc/version_signature, which is ubuntu specific. This patch checks the existance of /proc/version_signature, and returns version number through parsing this file instead of uname. Version string is untouched (value returns from uname) because `uname -r` is required to be consistence with path of kbuild directory in /lib/module. Signed-off-by: -
Namhyung Kim authored
When it records callchains, they will always have 2 scheduler functions (__schedule + schedule or __schedule + preempt_schedule) and get ignored. So it should collect 2 more functions to show the expected number of callchains to user. Committer Notes: Example of final result, using the same perf.data file as in the previous cset comment, but this time redirecting the output of 'perf sched timehist' to a file instead of copy'n'pasting from xterm: [root@jouet experimental]# perf sched timehist > /tmp/bla [root@jouet experimental]# cat /tmp/bla time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) -------- ---- -------------------- ------ ------ ----- 6.494998 [01] <idle> 0.000 0.000 0.000 6.495027 [02] perf[519] 0.000 0.000 0.000 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_poll 6.495096 [03] <idle> 0.000 0.000 0.000 6.495100 [03] rcuos/0[9] 0.000 0.005 0.003 rcu_nocb_kthread <- kthread <- ret_from_fork 6.495113 [01] perf[520] 0.000 0.008 0.114 preempt_schedule_common <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec <- do_execveat_common.isra.35 6.495121 [00] <idle> 0.000 0.000 0.000 6.495129 [01] migration/1[17] 0.000 0.003 0.016 smpboot_thread_fn <- kthread <- ret_from_fork 6.496085 [02] <idle> 0.000 0.000 1.057 6.496096 [02] kworker/u16:1[31169] 0.000 0.004 0.011 worker_thread <- kthread <- ret_from_fork 6.496096 [03] <idle> 0.003 0.000 0.996 6.496169 [02] <idle> 0.011 0.000 0.072 6.496171 [00] ls[520] 0.008 0.000 1.049 do_exit <- do_group_exit <- [unknown] <- entry_SYSCALL_64_fastpath 6.496172 [03] gnome-terminal-[4391] 0.000 0.003 0.076 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_timeout <- do_sys_poll <- sys_poll Signed-off-by:Namhyung Kim <namhyung@kernel.org> Tested-by:
-
Namhyung Kim authored
The sched_switch event always captured from the scheduler function. So it'd be great omit them from the callchain. This patch marks the functions to be omitted by later patch. Committer notes: Testing it: Before: [root@jouet experimental]# perf sched record -g ls Dockerfile perf.data x-mips64 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.355 MB perf.data (29 samples) ] [root@jouet experimental]# perf sched timehist time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ----------- ----- ----------------- ------ ------ ------ 6.494998 [001] <idle> 0.000 0.000 0.000 6.495027 [002] perf[519] 0.000 0.000 0.000 __schedule <- schedule <- schedule_hrtimeout_range_clock <- schedule_hrtimeou 6.495096 [003] <idle> 0.000 0.000 0.000 6.495100 [003] rcuos/0[9] 0.000 0.005 0.003 __schedule <- schedule <- rcu_nocb_kthread <- kthread <- ret_from_fork 6.495113 [001] perf[520] 0.000 0.008 0.114 __schedule <- preempt_schedule_common <- _cond_resched <- wait_for_completion 6.495121 [000] <idle> 0.000 0.000 0.000 6.495129 [001] migration/1[17] 0.000 0.003 0.016 __schedule <- schedule <- smpboot_thread_fn <- kthread <- ret_from_fork 6.496085 [002] <idle> 0.000 0.000 1.057 6.496096 [002] kworker/u16:1[31169] 0.000 0.004 0.011 __schedule <- schedule <- worker_thread <- kthread <- ret_from_fork 6.496096 [003] <idle> 0.003 0.000 0.996 6.496169 [002] <idle> 0.011 0.000 0.072 6.496171 [000] ls[520] 0.008 0.000 1.049 __schedule <- schedule <- do_exit <- do_group_exit <- [unknown] 6.496172 [003] gnome-terminal-[4391] 0.000 0.003 0.076 __schedule <- schedule <- schedule_hrtimeout_range_clock <- schedule_hrtimeo After: [root@jouet experimental]# perf sched timehist time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) ----------- ----- ----------------- ----- ----- ------ 6.494998 [001] <idle> 0.000 0.000 0.000 6.495027 [002] perf[519] 0.000 0.000 0.000 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_t 6.495096 [003] <idle> 0.000 0.000 0.000 6.495100 [003] rcuos/0[9] 0.000 0.005 0.003 rcu_nocb_kthread <- kthread <- ret_from_fork 6.495113 [001] perf[520] 0.000 0.008 0.114 preempt_schedule_common <- _cond_resched <- wait_for_completion <- stop_one_c 6.495121 [000] <idle> 0.000 0.000 0.000 6.495129 [001] migration/1[17] 0.000 0.003 0.016 smpboot_thread_fn <- kthread <- ret_from_fork 6.496085 [002] <idle> 0.000 0.000 1.057 6.496096 [002] kworker/u16:1[31169] 0.000 0.004 0.011 worker_thread <- kthread <- ret_from_fork 6.496096 [003] <idle> 0.003 0.000 0.996 6.496169 [002] <idle> 0.011 0.000 0.072 6.496171 [000] ls[520] 0.008 0.000 1.049 do_exit <- do_group_exit <- [unknown] 6.496172 [003] gnome-terminal-[4391] 0.000 0.003 0.076 schedule_hrtimeout_range_clock <- schedule_hrtimeout_range <- poll_schedule_ [root@jouet experimental]# Signed-off-by: -
Namhyung Kim authored
For tracepoint events, callchains always contain certain functions. Sometimes it'd be better to skip those functions as they have no value. Signed-off-by:
-
Ravi Bangoria authored
Support the PowerPC architecture using the ins_ops association method. Committer notes: Testing it with a perf.data file collected on a PowerPC machine and cross-annotated on a x86_64 workstation, using the associated vmlinux file: $ perf report -i perf.data.f22vm.powerdev --vmlinux vmlinux.powerpc .ktime_get vmlinux.powerpc │ clrldi r9,r28,63 8.57 │ ┌──bne e0 <- TUI cursor positioned here │54:│ lwsync 2.86 │ │ std r2,40(r1) │ │ ld r9,144(r31) │ │ ld r3,136(r31) │ │ ld r30,184(r31) │ │ ld r10,0(r9) │ │ mtctr r10 │ │ ld r2,8(r9) 8.57 │ │→ bctrl │ │ ld r2,40(r1) │ │ ld r10,160(r31) │ │ ld r5,152(r31) │ │ lwz r7,168(r31) │ │ ld r9,176(r31) 8.57 │ │ lwz r6,172(r31) │ │ lwsync 2.86 │ │ lwz r8,128(r31) │ │ cmpw cr7,r8,r28 2.86 │ │↑ bne 48 │ │ subf r10,r10,r3 │ │ mr r3,r29 │ │ and r10,r10,r5 2.86 │ │ mulld r10,r10,r7 │ │ add r9,r10,r9 │ │ srd r9,r9,r6 │ │ add r9,r9,r30 │ │ std r9,0(r29) │ │ addi r1,r1,144 │ │ ld r0,16(r1) │ │ ld r28,-32(r1) │ │ ld r29,-24(r1) │ │ ld r30,-16(r1) │ │ mtlr r0 │ │ ld r31,-8(r1) │ │← blr 5.71 │e0:└─→mr r1,r1 11.43 │ mr r2,r2 11.43 │ lwz r28,128(r31) Press 'h' for help on key bindings $ perf report -i perf.data.f22vm.powerdev --header-only # ======== # captured on: Thu Nov 24 12:40:38 2016 # hostname : pdev-f22-qemu # os release : 4.4.10-200.fc22.ppc64 # perf version : 4.9.rc1.g6298ce # arch : ppc64 # nrcpus online : 48 # nrcpus avail : 48 # cpudesc : POWER7 (architected), altivec supported # cpuid : 74,513 # total memory : 4158976 kB # cmdline : /home/ravi/Workspace/linux/tools/perf/perf record -a # event : name = cycles:ppp, , size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|CPU|PERIOD, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1 # HEADER_CPU_TOPOLOGY info available, use -I to display # HEADER_NUMA_TOPOLOGY info available, use -I to display # pmu mappings: cpu = 4, software = 1, tracepoint = 2, breakpoint = 5 # missing features: HEADER_TRACING_DATA HEADER_BRANCH_STACK HEADER_GROUP_DESC HEADER_AUXTRACE HEADER_STAT HEADER_CACHE # ======== # $ Signed-off-by:Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Tested-by:
-
Arnaldo Carvalho de Melo authored
By using arch->init() to set up some regular expressions to associate ins_ops to ARM instructions, ditching that old table that has instructions not present on ARM. Take advantage of having an arch->init() to hide more arm specific stuff from the common code, like the objdump details. The regular expressions comes from a patch written by Kim Phillips. Reviewed-by:
-
Arnaldo Carvalho de Melo authored
Arches like ARM will want to use regular expressions when deciding what instructions to associate with what ins_ops, provide infrastructure for that. Reviewed-by:
-
Arnaldo Carvalho de Melo authored
Some arches may want to dynamically populate the table using regular expressions on the instruction names to associate them with a set of parsing/formatting/etc functions (struct ins_ops), so provide a fallback for when the ins__find() method fails. That fall back will be able to resize the arch->instructions, setting arch->nr_instructions appropriately, helper functions to associate an ins_ops to an instruction name, growing the arch->instructions if needed and resorting it are provided, all the arch specific callback needs to do is to decide if the missing instruction should be added to arch->instructions with a ins_ops association. Reviewed-by:
-
Arnaldo Carvalho de Melo authored
The disasm_line::name field is always equal to ins::name, being used just to locate the instruction's ins_ops from the per-arch instructions table. Eliminate this duplication, nuking that field and instead make ins__find() return an ins_ops, store it in disasm_line::ins.ops, and keep just in disasm_line::ins.name what was in disasm_line::name, this way we end up not keeping a reference to entries in the per-arch instructions table. This in turn will help supporting multiple ways to manage the per-arch instructions table, allowing resorting that array, for instance, when the entries will move after references to its addresses were made. The same problem is avoided when one grows the array with realloc. So architectures simply keeping a constant array will work as well as architectures building the table using regular expressions or other logic that involves resorting the table. Reviewed-by:
-
- 24 Nov, 2016 2 commits
-
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo-20161123' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: New tool: - 'perf sched timehist' provides an analysis of scheduling events. Example usage: perf sched record -- sleep 1 perf sched timehist By default it shows the individual schedule events, including the wait time (time between sched-out and next sched-in events for the task), the task scheduling delay (time between wakeup and actually running) and run time for the task: time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) -------- ------ ---------------- --------- --------- -------- 1.874569 [0011] gcc[31949] 0.014 0.000 1.148 1.874591 [0010] gcc[31951] 0.000 0.000 0.024 1.874603 [0010] migration/10[59] 3.350 0.004 0.011 1.874604 [0011] <idle> 1.148 0.000 0.035 1.874723 [0005] <idle> 0.016 0.000 1.383 1.874746 [0005] gcc[31949] 0.153 0.078 0.022 ... Times are in msec.usec. (David Ahern, Namhyung Kim) Improvements: - Make 'perf c2c report' support -f/--force, to allow skipping the ownership check for root users, for instance, just like the other tools (Jiri Olsa) - Allow sorting cachelines by total number of HITMs, in addition to local and remote numbers (Jiri Olsa) Fixes: - Make sure errors aren't suppressed by the TUI reset at the end of a 'perf c2c report' session (Jiri Olsa) Infrastructure changes: - Initial work on having the annotate code better support multiple architectures, including the ability to cross-annotate, i.e. to annotate perf.data files collected on an ARM system on a x86_64 workstation (Arnaldo Carvalho de Melo, Ravi Bangoria, Kim Phillips) - Use USECS_PER_SEC instead of hard coded number in libtraceevent (Steven Rostedt) - Add retrieval of preempt count and latency flags in libtraceevent (Steven Rostedt) Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Ingo Molnar authored
Signed-off-by:
-
- 23 Nov, 2016 20 commits
-
-
git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Anna Schumaker: "Most of these fix regressions or races, but there is one patch for stable that Arnd sent me Stable bugfix: - Hide array-bounds warning Bugfixes: - Keep a reference on lock states while checking - Handle NFS4ERR_OLD_STATEID in nfs4_reclaim_open_state - Don't call close if the open stateid has already been cleared - Fix CLOSE rases with OPEN - Fix a regression in DELEGRETURN" * tag 'nfs-for-4.9-4' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFSv4.x: hide array-bounds warning NFSv4.1: Keep a reference on lock states while checking NFSv4.1: Handle NFS4ERR_OLD_STATEID in nfs4_reclaim_open_state NFSv4: Don't call close if the open stateid has already been cleared NFSv4: Fix CLOSE races with OPEN NFSv4.1: Fix a regression in DELEGRETURN
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds authored
Pull arch/tile bugfix from Chris Metcalf: "This fixes a bug that causes reboots after 208 days of uptime :-)" * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: avoid using clocksource_cyc2ns with absolute cycle count
-
Chris Metcalf authored
For large values of "mult" and long uptimes, the intermediate result of "cycles * mult" can overflow 64 bits. For example, the tile platform calls clocksource_cyc2ns with a 1.2 GHz clock; we have mult = 853, and after 208.5 days, we overflow 64 bits. Since clocksource_cyc2ns() is intended to be used for relative cycle counts, not absolute cycle counts, performance is more importance than accepting a wider range of cycle values. So, just use mult_frac() directly in tile's sched_clock(). Commit 4cecf6d4 ("sched, x86: Avoid unnecessary overflow in sched_clock") by Salman Qazi results in essentially the same generated code for x86 as this change does for tile. In fact, a follow-on change by Salman introduced mult_frac() and switched to using it, so the C code was largely identical at that point too. Peter Zijlstra then added mul_u64_u32_shr() and switched x86 to use it. This is, in principle, better; by optimizing the 64x64->64 multiplies to be 32x32->64 multiplies we can potentially save some time. However, the compiler piplines the 64x64->64 multiplies pretty well, and the conditional branch in the generic mul_u64_u32_shr() causes some bubbles in execution, with the result that it's pretty much a wash. If tilegx provided its own implementation of mul_u64_u32_shr() without the conditional branch, we could potentially save 3 cycles, but that seems like small gain for a fair amount of additional build scaffolding; no other platform currently provides a mul_u64_u32_shr() override, and tile doesn't currently have an <asm/div64.h> header to put the override in. Additionally, gcc currently has an optimization bug that prevents it from recognizing the opportunity to use a 32x32->64 multiply, and so the result would be no better than the existing mult_frac() until such time as the compiler is fixed. For now, just using mult_frac() seems like the right answer. Cc: stable@kernel.org [v3.4+] Signed-off-by:
Chris Metcalf <cmetcalf@mellanox.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Six fixes for bugs that were found via fuzzing, and a trivial hw-enablement patch for AMD Family-17h CPU PMUs" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Allow only a single PMU/box within an events group perf/x86/intel: Cure bogus unwind from PEBS entries perf/x86: Restore TASK_SIZE check on frame pointer perf/core: Fix address filter parser perf/x86: Add perf support for AMD family-17h processors perf/x86/uncore: Fix crash by removing bogus event_list[] handling for SNB client uncore IMC perf/core: Do not set cpuctx->cgrp for unscheduled cgroups
-
David Ahern authored
The -V option provides a visual aid for sched switches by cpu: $ perf sched timehist -V time cpu 0123456789abc task name b/n time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------- -------------------- --------- --------- --------- ... 2412598.429696 [0009] i <idle> 0.000 0.000 0.000 2412598.429767 [0002] s perf[7219] 0.000 0.000 0.000 2412598.429783 [0009] s perf[7220] 0.000 0.006 0.087 2412598.429794 [0010] i <idle> 0.000 0.000 0.000 2412598.429795 [0009] s migration/9[53] 0.000 0.003 0.011 2412598.430370 [0010] s sleep[7220] 0.011 0.000 0.576 2412598.432584 [0003] i <idle> 0.000 0.000 0.000 ... Committer notes: 'i' marks idle time, 's' are scheduler events. Signed-off-by:David Ahern <dsahern@gmail.com> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Tested-by:
-
David Ahern authored
If callchains were recorded they are appended to the line with a default stack depth of 5: 1.874569 [0011] gcc[31949] 0.014 0.000 1.148 wait_for_completion_killable <- do_fork <- sys_vfork <- stub_vfork <- __vfork 1.874591 [0010] gcc[31951] 0.000 0.000 0.024 __cond_resched <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec 1.874603 [0010] migration/10[59] 3.350 0.004 0.011 smpboot_thread_fn <- kthread <- ret_from_fork 1.874604 [0011] <idle> 1.148 0.000 0.035 cpu_startup_entry <- start_secondary 1.874723 [0005] <idle> 0.016 0.000 1.383 cpu_startup_entry <- start_secondary 1.874746 [0005] gcc[31949] 0.153 0.078 0.022 do_wait sys_wait4 <- system_call_fastpath <- __GI___waitpid --no-call-graph can be used to not show the callchains. --max-stack is used to control the number of frames shown (default of 5). -x/--excl options can be used to collapse redundant callchains to get more relevant data on screen. Signed-off-by:
-
David Ahern authored
The -w option is to show wakeup events with timehist. $ perf sched timehist -w time cpu task name b/n time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ -------------------- --------- --------- --------- 2412598.429689 [0002] perf[7219] awakened: perf[7220] 2412598.429696 [0009] <idle> 0.000 0.000 0.000 2412598.429767 [0002] perf[7219] 0.000 0.000 0.000 2412598.429780 [0009] perf[7220] awakened: migration/9[53] ... Signed-off-by: -
David Ahern authored
The -s/--summary option is to show process runtime statistics. And the -S/--with-summary option is to show the stats with the normal output. $ perf sched timehist -s Runtime summary comm parent sched-in run-time min-run avg-run max-run stddev (count) (msec) (msec) (msec) (msec) % --------------------------------------------------------------------------------------------------------- ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87 rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23 watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00 watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00 ... Terminated tasks: sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28 Idle stats: CPU 0 idle for 2352.006 msec CPU 1 idle for 2764.497 msec CPU 2 idle for 2998.229 msec CPU 3 idle for 2967.800 msec Total number of unique tasks: 52 Total number of context switches: 2532 Total run time (msec): 218.036 Signed-off-by: -
David Ahern authored
'perf sched timehist' provides an analysis of scheduling events. Example usage: perf sched record -- sleep 1 perf sched timehist By default it shows the individual schedule events, including the wait time (time between sched-out and next sched-in events for the task), the task scheduling delay (time between wakeup and actually running) and run time for the task: time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) -------------- ------ -------------------- --------- --------- --------- 79371.874569 [0011] gcc[31949] 0.014 0.000 1.148 79371.874591 [0010] gcc[31951] 0.000 0.000 0.024 79371.874603 [0010] migration/10[59] 3.350 0.004 0.011 79371.874604 [0011] <idle> 1.148 0.000 0.035 79371.874723 [0005] <idle> 0.016 0.000 1.383 79371.874746 [0005] gcc[31949] 0.153 0.078 0.022 ... Times are in msec.usec. Committer note: Add above explanation as the 'perf sched timehist' entry for 'man perf-sched'. Signed-off-by: -
Namhyung Kim authored
The EVSEL__PRINT_CALLCHAIN_ARROW options can be used to print callchains with arrows for readability. It will be used 'sched timehist' command like below: __schedule <- schedule <- schedule_timeout <- rcu_gp_kthread <- kthread <- ret_from_fork __schedule <- schedule <- schedule_timeout <- rcu_gp_kthread <- kthread <- ret_from_fork __schedule <- schedule <- worker_thread <- kthread <- ret_from_fork Suggested-and-Acked-by: -
Namhyung Kim authored
The __symbol__fprintf_symname_offs() always shows symbol offsets. So there's no difference between 'perf script -F ip,sym' and 'perf script -F ip,sym,symoff'. I don't think it's a desired behavior.. Signed-off-by:
-
Jiri Olsa authored
Adding support for cascading options added by Namhyung in: commit 369a2478 ("tools lib subcmd: Support cascading options") This way the report and record command share options with with c2c command and can save some option duplicates. For now it's the 'v' option. Signed-off-by:
Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1479764011-10732-7-git-send-email-jolsa@kernel.orgSigned-off-by:
-
Jiri Olsa authored
Currently we display the cacheline list sorted on remote HITMs by default. The problem is that they might not be always counted and 'perf c2c report' displays an empty output. Thus it's more convenient to display and sort the cacheline list based on the total of HITMs and have the best change to see data in the default report run. Signed-off-by:
-
Jiri Olsa authored
Count total number of HITMs in a special field. This will ease up addition of total HITM sorting into c2c report in the following patch. Signed-off-by:
-
Jiri Olsa authored
Adding -f/--force option to go through ownership validation: $ sudo perf c2c report File perf.data not owned by current user or root (use -f to override) $ $ sudo perf c2c report -f < c2c report output > $ Signed-off-by:
-
Jiri Olsa authored
Because of the early browser switch we won't get possible error messages, as it will clear the screen right after showing the message, e.g.: Before: $ sudo perf c2c report -d lcl $ After: $ sudo perf c2c report -d lcl File perf.data not owned by current user or root (use -f to override) $ $ ls -la perf.data -rw-------. 1 acme acme 26648 Nov 22 15:11 perf.data $ Signed-off-by:
-
Jiri Olsa authored
It is useful for debug to see file descriptors for each event. Before: $ perf stat -vvv -e cycles,cache-misses ls ... sys_perf_event_open: pid 12146 cpu -1 group_fd -1 flags 0x8 ... sys_perf_event_open: pid 12146 cpu -1 group_fd 3 flags 0x8 sys_perf_event_open failed, error -13 Now: $ perf stat -vvv -e cycles,cache-misses ls ... sys_perf_event_open: pid 12858 cpu -1 group_fd -1 flags 0x8 = 3 ... sys_perf_event_open: pid 12858 cpu -1 group_fd 3 flags 0x8 sys_perf_event_open failed, error -13 Signed-off-by:
-
Steven Rostedt authored
Add a way to retrieve the preempt count as well as the latency flags from a pevent_record. int pevent_data_preempt_count(pevent, record); returns the preempt count of a record. int pevent_data_flags(pevent, record); returns the latency flags for a record. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Acked-by:
-
Steven Rostedt authored
Instead of using 1000000, use the define in time64.h instead. Also remove the the duplicate defines for NSECS_PER_SEC. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "The last push broke algif_hash for all shash implementations, so this is a follow-up to fix that. This also fixes a problem in the crypto scatterwalk that triggers a BUG_ON with certain debugging options due to the new vmalloced-stack code" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: scatterwalk - Remove unnecessary aliasing check in map_and_copy crypto: algif_hash - Fix result clobbering in recvmsg
-
- 22 Nov, 2016 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linuxLinus Torvalds authored
Pull thermal management fix from Zhang Rui: "We only have one urgent fix this time. Commit 3105f234 ("thermal/powerclamp: correct cpu support check"), which is shipped in 4.9-rc3, fixed a problem introduced by commit b721ca0d ("thermal/powerclamp: remove cpu whitelist"). But unfortunately, it broke intel_powerclamp driver module auto- loading at the same time. Thus we need this change to add back module auto-loading for 4.9" * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal/powerclamp: add back module device table
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Two small fixes. One prevents timeouts on mpt3sas when trying to use the secure erase protocol which causes the erase protocol to be aborted. The second is a regression in a prior fix which causes all commands to abort during PCI extended error recovery, which is incorrect because PCI EEH is independent from what's happening on the FC transport" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: do not abort all commands in the adapter during EEH recovery scsi: mpt3sas: Fix secure erase premature termination
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "A handful of driver fixes. The sunxi fixes are for an incorrect clk tree configuration and a bad frequency calculation. The other two are fixes for passing the wrong pointer in drivers recently converted to clk_hw style registration" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: efm32gg: Pass correct type to hw provider registration clk: berlin: Pass correct type to hw provider registration clk: sunxi: Fix M factor computation for APB1 clk: sunxi-ng: sun6i-a31: Force AHB1 clock to use PLL6 as parent
-
Arnd Bergmann authored
A correct bugfix introduced a harmless warning that shows up with gcc-7: fs/nfs/callback.c: In function 'nfs_callback_up': fs/nfs/callback.c:214:14: error: array subscript is outside array bounds [-Werror=array-bounds] What happens here is that the 'minorversion == 0' check tells the compiler that we assume minorversion can be something other than 0, but when CONFIG_NFS_V4_1 is disabled that would be invalid and result in an out-of-bounds access. The added check for IS_ENABLED(CONFIG_NFS_V4_1) tells gcc that this really can't happen, which makes the code slightly smaller and also avoids the warning. The bugfix that introduced the warning is marked for stable backports, we want this one backported to the same releases. Fixes: 98b0f80c ("NFSv4.x: Fix a refcount leak in nfs_callback_up_net") Cc: stable@vger.kernel.org # v3.7+ Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Two fixes for autogroup scheduling, for races when turning the feature on/off via /proc/sys/kernel/sched_autogroup_enabled" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/autogroup: Do not use autogroup->tg in zombie threads sched/autogroup: Fix autogroup_move_group() to never skip sched_move_task()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes: - two fixes to make (very) old Intel CPUs boot reliably - fix the intel-mid driver and rename it - two KASAN false positive fixes - an FPU fix - two sysfb fixes - two build fixes related to new toolchain versions" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/platform/intel-mid: Rename platform_wdt to platform_mrfld_wdt x86/build: Build compressed x86 kernels as PIE when !CONFIG_RELOCATABLE as well x86/platform/intel-mid: Register watchdog device after SCU x86/fpu: Fix invalid FPU ptrace state after execve() x86/boot: Fail the boot if !M486 and CPUID is missing x86/traps: Ignore high word of regs->cs in early_fixup_exception() x86/dumpstack: Prevent KASAN false positive warnings x86/unwind: Prevent KASAN false positive warnings in guess unwinder x86/boot: Avoid warning for zero-filling .bss x86/sysfb: Fix lfb_size calculation x86/sysfb: Add support for 64bit EFI lfb_base
-
