- 12 May, 2011 2 commits
-
-
Jan Schmidt authored
adds ioctls necessary to start and cancel scrubs, to get current progress and to get info about devices to be scrubbed. Note that the scrub is done per-device and that the ioctl only returns after the scrub for this devices is finished or has been canceled. Signed-off-by: Arne Jansen <sensille@gmx.net>
-
Arne Jansen authored
This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen <sensille@gmx.net>
-
- 25 Apr, 2011 8 commits
-
-
Tsutomu Itoh authored
The error processing of several places is changed like setting the error number only at the error. Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Josef Bacik authored
In btrfs_submit_direct_hook if the first btrfs_map_block fails we need to put the orig_bio, not bio. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Josef Bacik authored
If our space cache is wrong, we do the right thing and free up everything that we loaded, however we don't reset the total_bitmaps counter or the thresholds or anything. So in btrfs_remove_free_space_cache make sure to call free_bitmap() if it's a bitmap, this will keep us from panicing when we check to make sure we don't have too many bitmaps. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Li Zefan authored
Since commit dc89e982, we've changed to use a specific slab for alocation of free_space items. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
David Sterba authored
Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Tsutomu Itoh authored
The check on the return value of kmalloc() is added to some places. Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Itaru Kitayama authored
the space cache use extent_readpages() to read free space information, so we can not use GFP_KERNEL flag to allocate memory, or it may lead to deadlock. Signed-off-by: Itaru Kitayama <kitayama@cl.bb4u.ne.jp> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Tsutomu Itoh authored
It is necessary to unlock mutex_lock before it return an error when btrfs_alloc_path() fails. Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
- 18 Apr, 2011 1 commit
-
-
Chris Mason authored
The free space caching code was recently reworked to cache all the pages it needed instead of using find_get_page everywhere. One loop was missed though, so it ended up leaking pages. This fixes it to use our page array instead of find_get_page. Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
- 16 Apr, 2011 2 commits
-
-
Josef Bacik authored
Everytime we try to allocate disk space we try and see if we can pre-emptively allocate a chunk, but in the common case we don't allocate anything, so there is no sense in taking the chunk_mutex at all. So instead if we are allocating a chunk, mark it in the space_info so we don't get two people trying to allocate at the same time. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Reviewed-by: Liu Bo <liubo2009@cn.fujitsu.com>
-
Chris Mason authored
A recent commit caches the extent state in end_bio_extent_readpage, but the search it does should look for locked extents. This fixes things to make it more effective. Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
- 15 Apr, 2011 1 commit
-
-
Chris Mason authored
find_free_extent likes to allocate in contiguous clusters, which makes writeback faster, especially on SSD storage. As the FS fragments, these clusters become harder to find and we have to decide between allocating a new chunk to make more clusters or giving up on the cluster to allocate from the free space we have. Right now it creates too many chunks, and you can end up with a whole FS that is mostly empty metadata chunks. This commit changes the allocation code to be more strict and only allocate new chunks when we've made good use of the chunks we already have. Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
- 13 Apr, 2011 5 commits
-
-
Miao Xie authored
Call posix_acl_valid() to check if an acl is valid or not. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
-
Miao Xie authored
Link count of the inode is not decreased if btrfs_set_inode_index() fails. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Singed-off-by: Li Zefan <lizf@cn.fujitsu.com>
-
Li Zefan authored
btrfs_next_leaf() can return -errno, and we should propagate it to userspace. This also simplifies how we walk the btree path. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
-
Li Zefan authored
btrfs_next_leaf() can return -errno, and we should propagate it to userspace. This also simplifies how we walk the btree path. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
-
Chris Mason authored
The extent_io code can take cached pointers into the extent state trees, and these can make lookups much faster in common operations. The caching only happens when specific bits are set that prevent merging and splitting of the extent state. A help function was added to uncache the state, and it was testing the same set of conditionals. This can leak in very strange corner cases where the lock bit goes away unexpectedly. The uncaching should be unconditional. Once we have a ref on the extent we should always give it up. Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
- 12 Apr, 2011 8 commits
-
-
Chris Mason authored
Merge branch 'for-chris' of git://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-work into for-linus
-
Arne Jansen authored
In several places the sequence (set_extent_uptodate, unlock_extent) is used. This leads to a duplicate lookup of the extent state. This patch lets set_extent_uptodate return a cached extent_state which can be passed to unlock_extent_cached. The occurences of the above sequences are updated to use the cache. Only end_bio_extent_readpage is updated that it first gets a cached state to pass it to the readpage_end_io_hook as the prototype requested and is later on being used for set/unlock. Signed-off-by: Arne Jansen <sensille@gmx.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Josef Bacik authored
I've been working on making our O_DIRECT latency not suck and I noticed we were taking the trans_mutex in btrfs_end_transaction. So to do this we convert num_writers and use_count to atomic_t's and just decrement them in btrfs_end_transaction. Instead of deleting the transaction from the trans list in put_transaction we do that in btrfs_commit_transaction() since that's the only time it actually needs to be removed from the list. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
-
Xin Zhong authored
We create two subvolumes (meego_root and meego_home) in btrfs root directory. And set meego_root as default mount subvolume. After we remount btrfs, meego_root is mounted to top directory by default. Then when we try to mount meego_home (subvol=meego_home) to a subdirectory, it failed. The problem is when default mount subvolume is set to meego_root, we search meego_home in meego_root but can not find it. So the solution is to add a new mount option (subvolrootid) to specify subvol id of root and search subvol name in it. For our case, now we can use "-o subvolrootid=0,subvol=meego_home) to mount meego_home. Detail information can be found in meego bugzilla: https://bugs.meego.com/show_bug.cgi?id=15055Signed-off-by: Zhong, Xin <xin.zhong@intel.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Daniel J Blueman authored
Fix address space annotation correct in ioctl.c. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> BTRFS_BLOCK_GROUP_SYSTEM, @@ -2387,7 +2387,7 @@ long btrfs_ioctl_space_info(struct btrfs_root *root, void __user *arg) up_read(&info->groups_sem); } - user_dest = (struct btrfs_ioctl_space_info *) + user_dest = (struct btrfs_ioctl_space_info __user *) (arg + sizeof(struct btrfs_ioctl_space_args)); if (copy_to_user(user_dest, dest_orig, alloc_size)) Reviewed-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Josef Bacik authored
Apparently it is ok to submit a read to an IDE device with the same target page for different offsets. This is what Windows does under qemu. The problem is under DIO we expect them to be different buffers for checksumming reasons, and so this sort of thing will result in checksum errors, when in reality the file is fine. So when reading, check to make sure that all iov bases are different, and if they aren't fall back to buffered mode, since that will work out right. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Sergei Trofimovich authored
Fix data corruption caused by memcpy() usage on overlapping data. I've observed it first when found out usermode linux crash on btrfs. ?all chain is the following: ------------[ cut here ]------------ WARNING: at /home/slyfox/linux-2.6/fs/btrfs/extent_io.c:3900 memcpy_extent_buffer+0x1a5/0x219() Call Trace: 6fa39a58: [<601b495e>] _raw_spin_unlock_irqrestore+0x18/0x1c 6fa39a68: [<60029ad9>] warn_slowpath_common+0x59/0x70 6fa39aa8: [<60029b05>] warn_slowpath_null+0x15/0x17 6fa39ab8: [<600efc97>] memcpy_extent_buffer+0x1a5/0x219 6fa39b48: [<600efd9f>] memmove_extent_buffer+0x94/0x208 6fa39bc8: [<600becbf>] btrfs_del_items+0x214/0x473 6fa39c78: [<600ce1b0>] btrfs_delete_one_dir_name+0x7c/0xda 6fa39cc8: [<600dad6b>] __btrfs_unlink_inode+0xad/0x25d 6fa39d08: [<600d7864>] btrfs_start_transaction+0xe/0x10 6fa39d48: [<600dc9ff>] btrfs_unlink_inode+0x1b/0x3b 6fa39d78: [<600e04bc>] btrfs_unlink+0x70/0xef 6fa39dc8: [<6007f0d0>] vfs_unlink+0x58/0xa3 6fa39df8: [<60080278>] do_unlinkat+0xd4/0x162 6fa39e48: [<600517db>] call_rcu_sched+0xe/0x10 6fa39e58: [<600452a8>] __put_cred+0x58/0x5a 6fa39e78: [<6007446c>] sys_faccessat+0x154/0x166 6fa39ed8: [<60080317>] sys_unlink+0x11/0x13 6fa39ee8: [<60016b80>] handle_syscall+0x58/0x70 6fa39f08: [<60021377>] userspace+0x2d4/0x381 6fa39fc8: [<60014507>] fork_handler+0x62/0x69 ---[ end trace 70b0ca2ef0266b93 ]--- http://www.mail-archive.com/linux-btrfs@vger.kernel.org/msg09302.htmlSigned-off-by: Sergei Trofimovich <slyfox@gentoo.org> Reviewed-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Yoshinori Sano authored
This patch fixes memory leaks in btrfs_new_inode(). Signed-off-by: Yoshinori Sano <yoshinori.sano@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
- 08 Apr, 2011 8 commits
-
-
Josef Bacik authored
Apparently it is ok to submit a read to an IDE device with the same target page for different offsets. This is what Windows does under qemu. The problem is under DIO we expect them to be different buffers for checksumming reasons, and so this sort of thing will result in checksum errors, when in reality the file is fine. So when reading, check to make sure that all iov bases are different, and if they aren't fall back to buffered mode, since that will work out right. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
In btrfs_get_block_direct we call btrfs_get_extent to lookup the extent for the range that we are looking for. If we don't find an extent, btrfs_get_extent will insert a extent_map for that area and mark it as a hole. So it does the job of allocating a new extent map and inserting it into the io tree. But if we're creating a new extent we free it up and redo all of that work. So instead pass the em to btrfs_new_extent_direct(), and if it will work just allocate the disk space and set it up properly and bypass the freeing/allocating of a new extent map and the expensive operation of inserting the thing into the io_tree. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
When looking at our DIO performance Chris said that for small IO's doing the async submit stuff tends to be more overhead than it's worth. With this on top of my other fixes I get about a 17-20% speedup doing a sequential dd with 4k IO's. Basically if we don't have to split the bio for the map length it's small enough to be directly submitted, otherwise go back to the async submit. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
We have been unconditionally allocating a new bio and re-adding all pages from our original bio to the new bio. This is needed if our original bio is larger than our stripe size, but if it is smaller than the stripe size then there is no need to do this. So check the map length and if we are under that then go ahead and submit the original bio. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
In the DIO code we often don't update the i_disk_size because the i_size isn't updated until after the DIO is completed, so basically we are allocating a path, doing a search, and updating the inode item for no reason since nothing changed. btrfs_ordered_update_i_size will return 1 if it didn't update i_disk_size, so only run btrfs_update_inode if btrfs_ordered_update_i_size returns 0. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
Instead of calling kmap_atomic for every thing we set in the inode item, map the entire inode item at the start and unmap it at the end. This makes a sequential dd of 400mb O_DIRECT something like 1% faster. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
I saw a lockup where we kept getting into this start transaction->commit transaction loop because of enospce. The fact is if we fail to make our reservation, we've tried _everything_ several times, so we only need to try and commit the transaction once, and if that doesn't work then we really are out of space and need to just exit. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
Currently we don't handle running out of space in the cache, so to fix this we keep track of how far in the cache we are. Then we only dirty the pages if we successfully modify all of them, otherwise if we have an error or run out of space we can just drop them and not worry about the vm writing them out. Thanks, Tested-by Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de> Signed-off-by: Josef Bacik <josef@redhat.com>
-
- 05 Apr, 2011 5 commits
-
-
Josef Bacik authored
When I moved the orphan adding to btrfs_truncate I missed the fact that during orphan cleanup we just add the orphan items to the orphan list without going through btrfs_orphan_add, which results in lots of warnings on mount if you have any orphan items that need to be truncated. Just remove this warning since it's ok, this will allow all of the normal space accounting take place. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Josef Bacik authored
I noticed a huge problem with the free space cache that was presenting as an early ENOSPC. Turns out when writing the free space cache out I forgot to take into account pinned extents and more importantly clusters. This would result in us leaking free space everytime we unmounted the filesystem and remounted it. I fix this by making sure to check and see if the current block group has a cluster and writing out any entries that are in the cluster to the cache, as well as writing any pinned extents we currently have to the cache since those will be available for us to use the next time the fs mounts. This patch also adds a check to the end of load_free_space_cache to make sure we got the right amount of free space cache, and if not make sure to clear the cache and re-cache the old fashioned way. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Li Zefan authored
root_item->flags and root_item->byte_limit are not initialized when a subvolume is created. This bug is not revealed until we added readonly snapshot support - now you mount a btrfs filesystem and you may find the subvolumes in it are readonly. To work around this problem, we steal a bit from root_item->inode_item->flags, and use it to indicate if those fields have been properly initialized. When we read a tree root from disk, we check if the bit is set, and if not we'll set the flag and initialize the two fields of the root item. Reported-by: Andreas Philipp <philipp.andreas@gmail.com> Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Tested-by: Andreas Philipp <philipp.andreas@gmail.com> cc: stable@kernel.org Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Miao Xie authored
the object id of the space cache inode's key is allocated from the relative root, just like the regular file. So we can't identify space cache inode by checking the object id of the inode's key, and we have to clear __GFP_FS flag at the time we look up the space cache inode. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Yoshinori Sano authored
Free btrfs_trans_handle when join_transaction() fails in start_transaction() Signed-off-by: Yoshinori Sano <yoshinori.sano@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
-